13 – 16 MAY 2014
SYDNEY SHOWGROUND |SYDNEY OLYMPIC PARK
ADVANCING MANUFACTURING
nationalmanufacturingweek.com.au
NMW Ausplas
EXHIBITION DIRECTORY
2  SYDNEY 13 – 16 MAY 2014 2  SYDNEY 13 – 16 MAY 2014
Floor Plan
1007
1615-01
1015
1025 1025
1037
1107
1113
1115
1119
1137
1143
1146
1201
1205
1206 1209
1211 1212
1214
1215
1217
1219
1225
1231
1237
1239
1245
1246
1302
1304 1305
1308
1309
1310
1316
1318
1323
1327
1329
1331
1337
1340
1344 1345
1347 1348
1400
1404
1405
1408
1425
1424
1428
1429
1431
1437
1442
1444
1445
1447
1502
1504 1505
1508 1509
1515
1519
1524
1525
1527
1528
1530
1537
1539
1541
1542
1543
1544
1546 1547 1549
1609
1614
1619
1625
1626 1627
1629
1633
1637
1638
1639
1640
1641
1644
1647
1707
1708 1711
1715
1718 1719
1724
1725
1726
1736
1737
1738 1845
1741
1746
1810
1813
1814 1815
1816 1817
1818 1819
1824
1825
1828
1830 1831
1842
1924
1928
1930
1141-01 1141-03
1141-04
1315-01
1315-04
1315-05
1315-06
1315-08
1409-01
1409-02
1415-01
1415-02
1415-03
1415-04
1415-05
1415-06
1415-07
1415-08
1605-01
1605-02
1605-03
1615-02
1730-01
1730-02
1730-03
1731-01
1731-02
1731-03
ONE TO ONE
BUSINESS MEETINGS
DIGITAL HUB
MATERIALS HANDLING
AUTOMATION & ROBOTICS
PROCESS, CONTROL
& INSTRUMENTATION
AUTOMATION
& ROBOTICS
WELDING ADDITIVE MANUFACTUING
DIGITAL MANUFACTUING
CUSTOMER
SERVICE
REGISTRATION
See Page 17 for a variety of new exhibitors eager to meet with you! EXHIBITORS
*Floor plan subject to change
STAND 1437
KEY
nationalmanufacturingweek.com.au   3
1925
1931
2025
2031
2123
2125
2131
2136
2139
2140
2149
2223
2224 2225
2849 2231
2239
2243
2248 2249
2323
2330
2335
2339
2342
2343
2345
2348 2349
2409
2422 2423
2435 2424 2534
2438 2439
2442
2443
2444
2448 2449
2508
2516
2518 2519
2500-01
2522 2523
2525
2531
2535
2538
2539
2541
2542
2543
2545
2549
2608
2612
2613
2616
2618
2622 2623
2624 2627
2631
2635
2638 2639
2640 2641
2642 2643
2644 2645
2649
2708
2712
2716
2717
2719
2722 2723
2730
2734
2738
2816
2818
2822
2937
2909
2913
2912
2917
2919
2923
2935
3008 3009
3012 3013
3016 3017
3018 3019
3020 3023
3035
3108
3112
3113
3118 3119
3135
3115
3218
3331
3334
3336
3117
3212
3423
3431
3433
2100-01
2100-02
2100-03
2100-04
2100-05
2100-06
2100-07
2110-01
2110-03
2110-04
2110-05
2200-01
2200-03
2200-04
2200-05
2210-03
2210-04
2210-05
2210-01 2310-01
2310-02
2400-03 2410-03 2500-02
2500-04 2410-04 2400-04
2210-02
2300-01
2300-02
2300-03
2300-04
2300-05
2310-03
2310-04
2310-05 2400-05
2410-02
2727-01
2727-03
2727-04
3024-01
3024-02
3024-03
3024-04
3025-01
3025-02
3025-03
3025-04
3125-01
3125-02
3125-03
3125-04
WORKPLACE 
SAFETY/ 
CLEANTECH 
HUB
AUSPLAS
HUB
HUB
ENGINEERING
ENGINEERING
R & D HUB
AIR TECHNOLOGY
AUSPLAS
ADVANCED
MATERIALS
WORKPLACE SAFETY
KIOSK
SEATING
NMW 2015
SALES STAND
CMEC OFFICE
Ausplas
SOLUTIONS THEATRE
PRODUCT ZONES
Welding
Technology
Digital Manufacturing Additiive
Manufactuing 
Advanced
Materials
Automation
& Robotics
Material
Handling
Process Control
& Instrumentation
Engineering
Information
Technology
Air Technology Clean Tech
Workplace
Safety
TOILET COFFEE CATERING AREA
Welding Demo A ZONE SPONSORS
Visit Stands marked ‘P’ for
NMW 2014 Passport Competition
Welding Demo E
Electrical
STAND 2125 STAND 2624 STAND 2719

nationalmanufacturingweek.com.au  5
Contents
General Information................................................................. 6
Welcome Letter from Reed Exhibitions................................ 8
Letter from Welding Technology Institute of Australia....... 9
Letter from NSW Department of Trade and Investment..10
Sponsors & Supporters.........................................................12
NMW Loyalty Partners...........................................................13
Solutions Theatre............................................................14 – 15
What’s New......................................................................16 – 17
Exhibitor List by Product Zone.....................................18 – 21
Product Index................................................................. 22 – 28
Brand Index..................................................................... 29 – 34
(With pull out tab for quick and easy exhibitor reference)
NMW Exhibitor List........................................................ 36 – 37
NMW Exhibitor Profiles................................................. 38 – 84
(With pull out tab for quick and easy exhibitor reference)
Welcome Letter from Reed Exhibitions...............................86
Ausplas Supporters...............................................................86
Ausplas Exhibitor List ............................................................87
Ausplas Exhibitor Profiles........................................... 88 – 100
Our Team.............................................................................. 101
Advertising Index................................................................. 102
Section 1 NMW
Section 2 Ausplas
6  SYDNEY 13 – 16 MAY 2014 6  SYDNEY 13 – 16 MAY 2014
Admission
Admission is free to trade personnel, it is a 
condition of entry that all trade visitors are
pre-registered or complete a registration form 
onsite. Students or children under the age of 14 
will not be admitted unless accompanied by an 
adult. Groups of students will not be admitted 
except by prior arrangement with the organisers.
Cameras – Photography/Video
Taking photographs or recording videos within 
the exhibition is strictly prohibited.
Canvassing
Canvassing for business by any unauthorised 
persons is strictly prohibited. The display and 
distribution of printed or other materials
(except by exhibitors within their own stands)
is prohibited. 
Customer Service Centre
The Customer Service Centre is located
at the entrance of the exhibition.
Food and Refreshments
Food and beverage outlets are located in Hall 
1 (The Dome) and Hall 4 and are open for the 
duration of the exhibition.
Security
Uniformed security guards will be on duty for 
the duration of the exhibition. The venue is also 
under constant video surveillance. 
Visitor Badges
Visitor badges must be worn at all times
whilst inside the exhibition.
The profi les in this directory are produced, as provided by the Exhibitors.
Whilst all care is taken, Reed Exhibitions Australia will not accept responsibility
for incorrect information printed in the Exhibition Directory.
Opening Hours
Tuesday 13 May ..................................................10am - 4pm
Networking Function ..........................................4pm - 6pm
*see page 17 for details
Wednesday 14 May ...........................................10am - 6pm
Thursday 15 May ................................................10am - 8pm
Friday 16 May ....................................................10am - 4pm
General Information
nationalmanufacturingweek.com.au   7
8  SYDNEY 13 – 16 MAY 2014 8  SYDNEY 13 – 16 MAY 2014 8  SYDNEY 13 – 16 MAY 2014
From Reed Exhibitions
Welcome to National Manufacturing Week (NMW) 
- the event that delivers innovation, information 
and inspiration to adapt to the next generation of 
manufacturing.
While there can be no doubt a strong manufacturing 
sector is vital to Australia’s future, it is also clear that 
the industry is undergoing dramatic change as it 
responds to market conditions.
Like the industry it serves, NMW is constantly evolving 
to ensure it refl ects these trends.
This year we are introducing a number of valuable 
new features designed to arm you with the tools to 
maximise productivity, evolve your product offering and 
grow your business.
Firstly, we have incorporated Ausplas –Australia’s 
national trade exhibition for plastics technology –in 
Sydney for the fi rst time since 1990. This is an exciting 
development for the Sydney show in 2014. Other new 
highlights include...
Four free-to-attend Solutions Theatresfor R&D, 
Digital, Workplace Safety and Plastics. The broad 
range of presentations and demonstrations from 
experts and exhibitors are designed to link industry 
and visitors with the latest research and best practice. 
The R&D Hub will feature Professor Ian Chubb, Chief 
Scientist for Australia, on “Crafting the building blocks 
of innovation for Australian manufacturing.”
With Six new Product Zonesto complement existing 
zones, you can expect to see more from the sectors 
and technologies that are driving industry growth such 
as Machine Tools, Additive and Digital Manufacturing, 
CleanTech and Engineering Services.
In line with the theme of NMW 2014 – ADVANCING 
MANUFACTURING –Reed Exhibitions is committed 
to providing Australia’s premier manufacturing industry 
trade event. We would like to thank our strategic 
partners – NSW Department of Trade & Investment
and Engineers Australia– as well as all visitors, 
exhibitors, partners and sponsors, whose contribution 
is pivotal to this commitment.
For the chance to socialise with them plus fellow 
visitors, please be sure to attend our Networking 
Function on from 4-6pm on Tuesday 13 May - a 
relaxed, fun and informal end to a busy fi rst day that 
gets everyone together to enjoy a drink and a bite.
Should you require more information or assistance, 
please don’t hesitate to visit the Customer Service 
Centre, where the NMW 2014 team will be more than 
happy to help.
I wish you a productive and enjoyable visit to NMW 
2014, and hope you can tap into the latest ideas and 
innovations on display throughout the halls.
ANTHONY REED
Exhibition Director - 
Manufacturing & Energy
ANTHONY REED
Welcome to National Manufacturing Week 
(NMW) - the event that delivers innovation, 
information and inspiration to adapt to the 
next generation of manufacturing.
Welcome Letter
nationalmanufacturingweek.com.au   9
From Welding Technology 
Institute of Australia
Welcome to the Welding Technology Zone
Celebrating 25 years of working to lead and assist 
in making Australian industry locally and globally 
competitive. 
Once again the Welding Technology Institute of Australia 
(WTIA) is thrilled to host exhibitors and visitors to the 
Welding Technology Zone of National Manufacturing 
Week, having partnered Reed for over 15 years. 
In the welding Technology Zone you will fi nd an excellent 
range of exhibitions demonstrating the ways in which 
welding and related technologies are living up to the 
challenge, and developing equipment and techniques 
that will improve the quality of welded product, the 
environment in which it is produced, and the bottom line 
of the companies which utilise it. 
National Manufacturing Week provides an established, 
high-profi le, one-stop venue for the demonstration of 
product and services to facilitate essential productivity 
growth and to inform decision makers, managers and 
essential personnel with leading-edge technology 
information.
Welding is an enabling technology utilised in a broad 
range of manufacturing industries. In the broadest 
sense, welding technology plays a major role in 
Australia’s well-being and is utilised by over 20,000 
Australian businesses, large and small, with over 
300,000 employees. The WTIA takes a leading role 
in supporting the Australian welding industry through 
world class technology transfer, welding management 
for productivity and WHS, training, qualifi cations and 
certifi cation of our technology receptors and future 
leaders.
As the Australian representative on the 56-member 
country International Institute of Welding (IIW), WTIA 
accesses not only leading international technology 
innovation, but also the latest advances in both 
personnel and company certifi cation. WTIA promotes 
the management of welding to international standards 
and delivers training as well as personnel and company 
certifi cation to support industry around the country. 
The Institute’s OzWeld School of Welding Technology 
delivers regular training for welding engineers, 
technologists, specialists, supervisors and inspectors 
throughout Australia.
The WTIA, established in 1989, is an amalgamation 
of the Australian Welding Institute (AWI, established 
1929) and the Australian Welding Research Association 
(AWRA, established 1964). In 2014, WTIA is celebrating 
25 years of working with industry and governments to 
support all Australian industries utilising welding with 
research and technology transfer, as well as education, 
training, qualifi cation and certifi cation to ensure that the 
people and the companies which make up the industry 
have the capabilities needed to implement positive 
change.
Welcome to the Welding Technology Zone. We invite 
you to learn more about innovation, productivity, 
sustainability and competitiveness for Australia’s welding 
industry.
JOHN BURNETT
Welcome to the Welding Technology 
Zone. Celebrating 25 years of working 
to lead and assist in making Australian 
industry locally and globally competitive. 
nationalmanufacturingweek.com.au  9
Welcome Letter
JOHN BURNETT
President 2013 – 2016
10  SYDNEY 13 – 16 MAY 2014 10  SYDNEY 13 – 16 MAY 2014 10  SYDNEY 13 – 16 MAY 2014
Welcome to National Manufacturing Week in 
Sydney, the capital of the State of New South 
Wales (NSW).
This is a landmark event in the calendar 
for suppliers of manufacturing equipment, 
technology and services to showcase 
their innovation and expertise to Australian 
manufacturing companies.
I am particularly delighted this year to welcome 
delegates to Ausplas, the longest running plastics 
industry event in the Southern Hemisphere.
This is the fi rst time in 24 years that Ausplas will 
be staged in Sydney. It’s time to see what you 
have been missing.
In recent years, Australia’s manufacturing sector 
has had to deal with high impact structural 
domestic and global economic change.
The sector’s determined resilience and ability to 
embrace opportunity in the face of such major 
challenges is remarkable.
Our signifi cant competitive strengths in design, 
research, logistics and ICT, particularly in
evidence here in NSW, position us well to 
leverage and benefi t from global shifts including 
the rise of the Asian middle-class, Big Data and 
an energy constrained environment.
In NSW alone, manufacturing companies invest 
some $1.3 billion annually in Research and 
Development and this is supporting the sector’s 
transformation in a post GFC environment.
We are seeing employment and export growth in 
higher value-add manufacturing sectors including 
food, machinery & equipment, chemicals, and 
non-metallic mineral product manufacturing.
We have our sights set fi rmly on ensuring 
Australia takes a leading global role in next 
generation, high value-add, advanced 
manufacturing and I commend your contribution 
to that goal.
I hope you enjoy your time at National 
Manufacturing Week and in Sydney and I 
encourage you to explore all that the event and 
Australia’s global city have to offer.
BARRY O’FARRELL MP
Premier of New South Wales
BARRY 0’FARRELL
We are seeing employment and export 
growth in higher value-add manufacturing 
sectors including food, machinery & 
equipment, chemicals, and non-metallic 
mineral product manufacturing.
From NSW Department
of Trade and Investment Welcome Letter
nationalmanufacturingweek.com.au   11
SILVER PARTNERS– Exhibiting for 7 or more continuous years
BRONZE PARTNERS– Exhibiting for 4 or more continuous years
GOLD PARTNERS – Exhibiting for 10 or more continuous years
National Manufacturing Week
would like to recognise and thank 
our long-term exhibiting companies.
STAND 2123
STAND 1115
STAND 1119
STAND 1544
STAND 1641
STAND 1318 STAND 1025 STAND 1348
STAND 1711 STAND 1819
STAND 2818 STAND 1137 STAND 1738
STAND 1824
STAND 1331 STAND 1619
STAND 1447
STAND 1445
STAND 1718
STAND 1310 STAND 1425
STAND 1707 STAND 1930 STAND 2516
STAND 1245
STAND 1644
STAND 2339
STAND 1637
STAND 2639
STAND 1347
STAND 1519
STAND 1719
STAND 2125 STAND 1215 STAND 1219
STAND 1211
STAND 2539
STAND 2131
STAND 2224
STAND 1543
Loyalty Partners
nationalmanufacturingweek.com.au   13
STRATEGIC PARTNERS
ZONE SPONSORS OFFICIAL PUBLICATION
Supporters and Sponsors
12  SYDNEY 13 – 16 MAY 2014 12  SYDNEY 13 – 16 MAY 2014
Air Technology
Additive Manufacturing Workplace Safety
Engineering
ASSOCIATION PARTNERS 
Advanced Materials Welding Technology Workplace Safety
Air Technology
Process Control & 
Instrucmentation
MEDIA PARTNERS
14  SYDNEY 13 – 16 MAY 2014
TUESDAY 13 MAY
10:30 –11:00  Keynote Address on Innovation
Speaker: Professor Ian Chubb, Chief Scientist for Australia
11:00 –11:45 Research in Business: Building Innovation Through Cooperation
Speakers: Peter Agnew, SME Engagement Manager for NSW & ACT, CSIRO & Bill Kerr, BSc (Hons), MSc, MBA 
Enterprise Connect Researchers in Business Facilitator, NSW/ACT Australian Industry Group 
11:45 –12:30 Digital Solutions: Connecting and Inspiring Businesses to Greater Prosperity Through Digital Solutions & 
Connectivity
Speaker: Mark Forbes, Economic Development and Tourism Manager, Moreton Bay Regional Council 
Exploring Novel Technological Developments in Photonics and Robotics
Speaker: Assoc. Prof. Andrew Hopkins, Head of Anglo-Australian Telescope Science, The Australian Astronomical 
Observatory
12:30 –1:15  Sustainability: Materials Management and Recyclability
Speaker: Professor Veena Sahajwalla, Director, Centre for Sustainable Materials Research and Technology, UNSW
The Power of Polyurethane Technology
Speaker: Owen Stam, General Manager & Exceutive Director, Pacifi c Urethanes Pty Ltd. 
1:15 – 1:45  Speed Networking Kick-off
To facilitate the networking opportunities at this event we will be running a “speed networking session”. Delegates will be 
able to discuss key manufacturing issues in an informal environment. Bring plenty of business cards to make the best use 
of this opportunity! 
1:45 –2:30  Nanotechnology – the Safety Implications
Speaker: Mark Moskvitch, Senior WHS Consultant, National Safety Council of Australia 
2:30 –3:15  From Traditional Compliance to Cutting Edge Safety - Designing OH&S into the Workplace
Speaker: Peter Dunphy, Director Operations, Work Health & Safety Division, WorkCover Authority of NSW 
4:00 –6:00  Social Networking Function
WEDNESDAY 14 MAY 
10:20 –11:00 The Importance of Innovation
Speaker: Marlene Kanga, Member of the Board, Innovation Australia & Former National President, Engineers Australia
Continuous Improvement and Optimisation of Manufacturing Execution Systems (MES)
Speaker: ATS Applied Tech Systems Pty. Ltd
10:30 –12:00 Plastics Industry Manufacturers Of Australia (PIMA) Sessions
11:00 –11:15 The NSW Manufacturing Sector - Innovation and the Future
Speaker: The Hon. Andrew James Constance, MP, NSW Minister for Finance & Services, NSW Liberal Party
11:15 –12:00 Get to Market Faster with SolidWorks Solutions
Speaker: Intercad Pty
Manufacturing Australia’s Future: Innovate or Perish
Speaker: Lachlan Mullane, Partner, Hodgkinson McInnes
12:00 –12:45 Industry Developments and Opportunities in Medical Technology
Speaker: Susi Tegen, Chief Executive, Australian Medical Technology Association 
Test and Measure
Speaker: Peter Forster, Principal Consultant, Automation Answers 
12:45 –1:15  Speed Networking Session
To facilitate the networking opportunities at this event we will be running a “speed networking session”. Delegates will be 
able to discuss key manufacturing issues in an informal environment. Bring plenty of business cards to make the best use 
of this opportunity! 
1:15 –2:00 The Changing Landscape of Additive Manufacturing: Experience Sharing on Advanced Applications
Speaker: Stratasys
1:15 –2:00  Technical Insights - Why Mobility in Manufacturing is a Must
Speaker: Kaido Schmidt, Country Manager, HansaWorld Australia
R&D
Research & 
Devlopement Hub
Ausplas Hub Digital Hub
Workplace Safety/
Cleantech Hub
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
Solutions Theatres
*For the location of each theatre, look for the corresponding logo on the fl oorplan page 2 & 3.
R&D
R&D
nationalmanufacturingweek.com.au   15
WEDNESDAY 14 MAY CONTINUED
2:00 –2:45  Printers and Workstations for the World of 3D
Speaker: IC3D
Discover the Missing Ingredient in SolidWorks through IC3D Steel
Speaker: Intercad Pty
Safety Technology and Early Warning Response in the Workplace
Speaker: Peter Meikle, VP Product Line Management & Competitive Strategy, Xtralis Pty Ltd. 
2:45 –3:15  3D Printing in Action
Speaker: 3D SYSTEMS
Looking at the Missing Elements in Textile Design
Speaker: Intercad Pty
3.15 –4:00  Metal 3D Printing – the Production Process
Speaker: Warwick Downing, Chief Executive, Rapid Advanced Manufacturing Limited (R.A.M)
THURSDAY 15 MAY 2014
10:30 –11:15   Fuelling the Local Industry: A look at Recent Gas Developments in Australia and What it Means for the 
Manufacturing Market in Australia
Speaker: Tennant Reed, Principal National Advisor - Public Policy, The Australian Industry Group
Product Lifecycle Management (PLM)
Speaker: ATS Applied Tech Systems Pty. Ltd
Driving Manufacturing Effi ciency Through Cleantech
Speaker: John O’Brien, Managing Director, Australian CleanTech 
11:15 –12:00 Informatics and eManufacturing for SMEs - Increasing Agility and Reducing the Manufacturing Cost Base
Speakers: Peter Kambouris,Theme Leader, Agile Manufacturing Technologies. Future Manufacturing Flagship CSIRO, 
Nico Adams, Senior Research Scientist, Materials Science and Engineering, CSIRO
SolidWorks Electrical Simplifi es Embedded Electrical Design
Speaker: Intercad Pty
Energy Efficiency: Cleaner, Greener & Leaner Manufacturing Plant
Speaker: Colin Cockroft, Senior Engineer - Manager East Coast, EMC Energy Made Clean 
12:00 –12:45 The 10 Most Common Reasons Organisations Fail to Sustain Lean : When Good Companies Go Wrong
Speaker: Damien Lacey, Sales & Marketing Manager, Vative
Thinking Big- The Power of Mobility 
Speaker: Maurice Rodrigues, Business Development Manager, Syspro Asia Pacific
Bioplastics – What and Why!
Speaker: Warwick Hall, Vice President & Technical Committee, Australasian Bioplastics Association
12:50 –1:30  S A Reverte: Technical Innovations Explored
Speaker: Radek Pavelec, Export Manager, William Cox Minerals Ltd
1:00 –1:30  Speed Networking Session:
To facilitate the networking opportunities at this event we will be running a “speed networking session”.
Delegates will be able to discuss key manufacturing issues in an informal environment.
Bring plenty of business cards to make the best use of this opportunity!
1:30 –2:15  Lean Manufacturing for SME’s 
Speaker: Tim McLean, Managing Director, TXM Lean Solutions Pty. Ltd.
Are You Sure You Have a Good Design? Are You Risking It All? 
Speaker: Intercad Pty
The Latest in Bio Plastic Technologies
Speaker: Dr Katherine Dean, Research Scientist & Team Leader, CSIRO
2:15 –3:00   Legal Session: The National & State Legal Frameworks for the Promotion of Renewable Energy in 
Manufacturing
Speaker: Damin Murdock, Principal Lawyer, MurdockCheng Law Practice 
Make Better Products: Autodesk 2015 Design Solutions for
Speaker: Deepak Maini, Lead Engineer – Manufacturing, Cadgroup
3:00 –3:45  Innovation in the Food Manufacturing Sector: Capturing Growth Opportunities in Asia
Speaker: Geoffrey Annison, CEO, Australian Food and Grocery Council
Getting Shop Floor Instructions Direct from Your CAD Data
Speaker: Intercad Pty 
FRIDAY 16 MAY 2014 
10:30 –11:15 Insights & Opportunities within the Mining and Energy Industry
Speaker: Karen Redshaw, National Manager, Resources Technology Innovation Centre, Mackay 
11:15 –12:00 Offshoring, Near-shoring, Re-shoring: IP security in Offshore Manufacturing 
Speaker: Brian Le Mon, Principal Consultant, GBOS
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
R&D
Digital Prototyping
16  SYDNEY 13 – 16 MAY 2014
NATIONAL MANUFACTURING WEEK
IS VERY DIFFERENT IN 2014.
We have introduced a host of exciting new features in 2014 that will arm you with the 
tools to maximise productivity, evolve your product offering and grow your business.
Key features of the application include:
Mobile APP
This NMW mobile app comprises a range of features to assist you in planning 
your visit to NMW 2014. The app is available for FREE, downloadable from 
the Apple iTunes store and Google Play. Compatible with iPhone, iPad and 
iPod with iOS version 6 and above and Android systems.
•   Interactive Floor Plan
Find what you are looking for!
•  Exhibitor ListFeaturing exhibitors 
and what they are showcasing in 
order to assist you in sourcing new 
products, or finding existing suppliers. 
•   Interactive Program See what’s on 
each day at NMW, when and where. 
•  Event Alerts & Reminders
Don’t miss any updates from
the NMW team during the show. 
•  My ProfileCreate your own personal 
profile and optionally choose to make 
it visible to other app users. 
•  People Profiles View profiles of other 
visitors and speakers at the event and
connect with them directly through 
the app.
•  Live Activity Post Updateson to the 
app’s activity stream with the ability to 
share it on twitter and Facebook.
Download 
IT NOW!
NEW
New Product Zones
NMW 2014 will feature 5 new Product Zones to complement existing zones. 
Look out for these new Product Zones covering fast-growing and emerging 
sectors and technologies: Additive Manufacturing, Advanced Materials, Clean 
Tech, Digital Manufacturing and Machine Tools.
Interactive Education
With four free-to-attend ‘Solutions Theatres’located on the exhibition fl oor, 
NMW 2014 aims to connect the industry and visitors with the very latest in 
manufacturing research and best practice.
In addition to an exciting new R&D Hub, there will be hubs for Digital 
Technology, Workplace Safety & CleanTech and Plastics (running within 
the Ausplas Exhibition). Each will feature a broad range of presentations, 
demonstrations and innovations, including technical insights and peer reviews. 
For details refer to page 14 & 15.
What’s New
R&D Hub (Tuesday – Friday)
Bridging the gap between innovation and integration, these high level presentations will 
showcase the big ideas bringing R&D and manufacturing closer together.
Digital Solutions (Tuesday – Friday)
From connectivity to mobility, these sessions will offer a mixture of technical demonstrations 
and real life case studies.
Workplace Safety(Tuesday and Wednesday)
The Workplace Safety sessions will give attendees a well-rounded view of safety within their 
workplace from a regulatory standpoint to evaluating the best passive and active systems.
Additive Manufacturing/3D printing (Wednesday)
This whole afternoon is dedicated to the latest developments within additive manufacturing, 
showcasing 3D printing innovation across different industry sectors.
Cleantech/Sustainability (Thursday)
From energy effi ciency to materials management these sessions will showcase sustainable 
tools and processes that are currently being developed across the supply chain.
Ausplas (Tuesday – Thursday)
These sessions will showcase the latest technical applications from around the plastics 
processing industry from technology to the latest materials.
nationalmanufacturingweek.com.au   17
NMW/Ausplas
Networking Event
Proudly 
sponsored by:
WHEN:Tuesday May 13
TIME:4pm – 6pm
WHERE:Sommerville Room, Level 1 above The Dome
NMW/Ausplas invite you to gather in a relaxed, informal setting 
together with fellow visitors, exhibitors, colleagues and clients to enjoy 
complimentary drinks and canapés.
This is a fantastic opportunity for all involved to broaden your network, 
liaise with industry leaders and strengthen existing relationships.
Attendance is free for exhibition visitors and exhibitors.
Apart from the exciting new features at NMW14, we also 
welcome a variety of new exhibitors eager to meet with you! EXHIBITORS
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Amaero Engineering  1429
Ampec Technologies Pty Ltd  1725
Asia Plastik  3009
ATS Applied Tech Systems  1549
Casey Cardinia Region  2449
Coast Electrical Industries Pty Ltd  1524
Colt International  3018
DAVI/FES  1818
DGS 3D  1528
Dynacast  1828
Edro Tube & Pipe Equipment  1143
ETD Pty Ltd  1627
Eurocrane Australia  1715
Filblast Pty Ltd  2531
Future Lighting Australia Pty Ltd/Umart Online  2631
GAP Plastomere Sarl  1201
Glenvern Associates Pty Ltd  1647
Gravotech Australia Pty Ltd  1408
Halo Business Intelligence (BI)  1746
HansaWorld Australia Pty Ltd  1542
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
HR3  2909
Hurll Nu-Way Pty Ltd  2622
Indis Limited  3020
John Thompson  2545
Kinetic Cutting Systems  2849
KYOCERA Asia Pacifi c Pte Ltd  2448
Laser & Sign Technology Pty Ltd  1431
Lightwave Technology  1638
Linear Technik Pty Ltd  1509
Lybina Pty Ltd  3012
Magic MP SPA  3423
Melbourne Centre for Nanofabrication  2423
Modern Tools  2239
MOSCA Strapping Systems  1814
Multicam Systems Pty Ltd  2139
NetSuite  1633
New Zealand Engineering News  2343
Nextool Technology Co Ltd  2248
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Norton Hardware  2140
OneCNC CAD CAM  1640
Panasonic Robot Welding Systems  1237
PBE-Roboplas Pty Ltd  2627
Performance Waterjet  2031
Plasquip Sales  3112
Plastral Pty Ltd  1444
Precision One Pty Ltd  1209
Pressure and Safety Systems  1107
Pro Z 3D Solutions  1539
Rapid Advanced Manufacturing Limited
(R.A.M.) and S.A.F.E. Ltd  1424
Renishaw Oceania Pty Ltd  2439
Robert Bosch (Australia) Pty Ltd  1214
Rösler UK  2443
RVB Group Pty Ltd  2708
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shanghai Kingsun Plastic Mould Co Ltd  3135
SigmaTEK Asia Pacifi c  1546
SLM Solutions GmbH  1424
Spitwater  2919
Stratasys  1437
Superior Lubricants  2249
Techfl ex Australia  1726
TECHNI Waterjet Pty Ltd  1825
Technical Forgings NZ Ltd  2608
TechRentals  1212
Tecweigh Pty Ltd  1206
The LS Starrett Company of Australia  2549
Tianyi Chemicals (Qida Chemical)  3118
Trend Marking Systems  1405
Trio Packaging Systems  1813
Trotec Laser  1928
TXM–Total Excellence in Manufacturing  2422
UBEECO™ Packaging Solutions  1708
VEM Tooling Co Ltd  3019
Watermark  2434
Westair SCR Australia Pty Ltd  2525
Wittmann Battenfeld Australia  3023
Xtralis  2822
Yawata Electrode (Thailand) Co Ltd  1442
Zhejiang Guidu Power Electronic Co Ltd  1830
18  SYDNEY 13 – 16 MAY 2014
Exhibitor List by Product Zone
3D Printing Systems  1530
3D Systems Asia Pacifi c  1537
DGS 3D  1528
Laser & Sign Technology Pty Ltd  1431
Pro Z 3D Solutions  1539
Rapid Advanced Manufacturing Limited 
(R.A.M.) and S.A.F.E. Ltd  1424
SLM Solutions GmbH  1424
Stratasys  1437
Composites Australia  2616
Duromer Products Pty Ltd  2716
Lavender Composites  2618
NOF Metal Coatings Asia Pacifi c Co Ltd 2612
RVB Group Pty Ltd  2708
Technical Forgings NZ Ltd  2608
A.P.I. Pneumatic  2623
Allen Group of Companies  2722
Allmach Pneumatic & Fluid Systems
Pty Ltd  2535
Donaldson Australasia Pty Limited  2624
Filblast Pty Ltd  2531
Hurll Nu-Way Pty Ltd  2622
Risen Machinery Co Pty Ltd  2523
Westair SCR Australia Pty Ltd  2525
Adept Turnkey Pty Ltd  1115
Apex Dynamics  1318
Gravotech Australia Pty Ltd  1408
Industrial dynamics  1318
IndustrySearch.com.au  1508
Linear Technik Pty Ltd  1509
Motion Solutions Pty Ltd  1329
Robert Bosch (Australia) Pty Ltd  1214
TEA Transmissions Australia Pty Ltd  1215
The Lincoln Electric Company 1231 & Demo F
TIME Group Inc  1404
Trend Marking Systems  1405
Treotham Automation Pty Ltd  1219
White International Pty Ltd  1309
Future Lighting Australia Pty Ltd/
Umart Online  2631
Renz Australia Pty Ltd  2635
ATS Applied Tech Systems  1549
Cadgroup Australia Pty Ltd  1541
Cadimage PLM  1447
Epicor Software  1445
Glenvern Associates Pty Ltd  1647
Halo Business Intelligence (BI)  1746
HansaWorld Australia Pty Ltd  1542
Intercad Pty Ltd  1741
LEAP Australia  1639
Lightwave Technology  1638
Manufacturers’ Monthly/Ferret.com.au  1644
NetSuite  1633
OneCNC CAD CAM  1640
Pronto Software Limited  1641
Sage Business Solutions Pty Ltd  1737
SigmaTEK Asia Pacifi c  1546
Star Business Solutions  1738
TMN Simulation  1547
ABO Electronics(Shenzhen) Co Ltd  1730-03
Ampec Technologies Pty Ltd  1725
Asia Sourcing Corp  1415-07
Atical Collaborate International Co Ltd 1415-08
Autek Teconology Corp  1409-01
Baosheng Science & Technology 
Innovation Co Ltd  1731-01
Bosbox  1736
CHITE Enterprises Co Ltd  1415-05
Coast Electrical Industries Pty Ltd  1524
Control Plus  1625
CONWIRE Enterprise Co Ltd  1415-02
Dynacast  1828
ECi M1  1544
ETD Pty Ltd  1627
Fluke Australia Pty Ltd  1626
Green Kent Inc  1415-03
Hiwin Technologies Corp  1315-01
Hont Electrical Co Ltd  1731-02
Hua Wei Industrial Co Ltd  1315-04
Illinois Enterprises Co  1315-08
JDV Control Valves Co Ltd  1409-01
nationalmanufacturingweek.com.au   19
Exhibitor List by Product Zone
Jiangsu Tongguang Optical Fibre 
Cable Co Ltd  1730-02
Lan Shiuon PTFE Industry Co Ltd  1415-06
Ningbo Yin Zhou Dutian Import &
Export Co Ltd  1629
Pan Taiwan Enterprise Co Ltd  1415-04
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd  1824
Shanxi Guangyu Led Lighting Co Ltd 1730-01
Sun Industries  1724
Sunlec International Pty Ltd  1637
Super Master Developing Co Ltd  315-05
TAITRA (Taiwan External 
Trade Development Council)  1415-12
Techfl ex Australia  1726
Tenanic Industrial Co Ltd  1415-01
Torema Engineering Pty Ltd  1525
Yomura Technologies Inc  1409-02
Yueqing Fengda Trade Co Ltd  1527
Zhejiang Guidu Power Electronic Co Ltd 1830
BAC Systems Pty Limited  2123
Beijing Muzi Carbon International 
Trade Co Ltd  2100-06
Blackwoods  1015&1037
Blue Water Engineering Pty Ltd  2131
Casey Cardinia Region  2449
Centralised Pumping Systems  1831
CGB Precision Products Pty Ltd  2518
Changzhou Amec Group Co Ltd  2200-01
Chengdu Bangpu Alloy 
Materials Co Ltd  2100-02
CIGWELD Pty Ltd  1037
Concept Fasteners  2516
Corporate Traveller  2149
Cryonomic  1930
Dalian Dianfeng Rubber Belt Co Ltd  2410-02
Dalian Hawk King Forging-Casting Industrial Co Ltd  2210-01
Dalian Liming Steel Structure Co Ltd 2410-04
Dalian Rubber&Plastics 
Machinery Co Ltd  2410-03
Dongying Giayoung Precision 
Metal Co Ltd  2243
Dy-Mark  1015
EHI Australia Pty Ltd  1015
Engineers Media  2541
Enterprise Connect  2225
Eximo  1015
GBOS  2323
Guizhou Aerospace Industry Co Ltd 2100-03
Hangzhou Vision Chain 
Transmission Co Ltd  2210-03
Hebei Xinlong Casting Co Ltd  2310-04
Henkel Australia (Loctite)  2025
Hi-Tech Metrology  2638
Hubei Fuyi Agricultural Machinery 
Manufacturing Co Ltd  2400-03
Hubei Quanli Machinery Group  2210-04
HW Technologies  2519
Industry Update Media  1817
Integrated Emergency &
Industrial Equipment  2738
ITW AAMTech  1015
Jiangsu Weiteli Motors-Making Co Ltd  2300-02
Jiangsu Yangli Group Co Ltd  2300-01
John Thompson  2545
Josco  1015
Jubilee Spring Co  2539
Kap Components Australia Pty Ltd  2349
Kelvindale Products Pty Ltd  2339
KLINGSPOR Australia Pty Ltd  2224
Kockums Bulk Systems Pty Ltd  2231
Langfang Shengsen Abrasives Co Ltd  2400-04
Leussink Engineering Pty Ltd  1819
Mackay Consolidated Industries Pty Ltd 2639
Mayo Hardware  1015
Modern Tools  2239
Moreton Bay Regional Council  2223
Mumme Tools Pty Ltd  1015
New Zealand Engineering News  2343
Nextool Technology Co Ltd  2248
Nitto Kohki Australia Pty Ltd  2136
Norbar Torque Tools  1015
Norton Hardware  2140
NSW Department of Trade and 
Investment  1925
Ogis Engineering Pty Ltd  2645
Performance Waterjet  2031
PFERD Australia  1037
Radius Benders Pty Ltd  2125
ReCoila Hose and Cord Reels  1015
Renishaw Oceania Pty Ltd  2439
Revolution Materials  1924
Rösler UK  2443
Saint Gobain  1037
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03
Shanghai Sanyu Industry Co Ltd  2110-04
Shanghai Yasun Metal 
Products Co Ltd  1605-02
Staetite Fasteners  2438
Stanley Black & Decker  1015
Storemasta Products Australia  1015
Superior Lubricants  2249
Sutton Tools Pty Ltd  2734
Syspro Australia Pty Ltd  1543
20  SYDNEY 13 – 16 MAY 2014
ENGINEERING CONTINUED
TECHNI Waterjet Pty Ltd  1825
Techspan Australia Pty Ltd  1842
Tengzhou Tri-Union Machinery  2100-01
The LS Starrett Company of Australia  2549
Tianli Machine  2100-05
Trotec Laser  1928
Vative  2538
Wafangdian Xinyue Machinery Co Ltd 2200-03
White Industries  1619
Woodland Metal Spinning Pty Ltd  2644
Wuhan Dapco Auto Parts Co Ltd  2310-03
Wuxi Kenke Heavy Industry 
Equipment Co Ltd  2200-04
Carl Zeiss Pty Ltd  2345
DAVI/FES  1818
Kinetic Cutting Systems  2849
KYOCERA Asia Pacifi c Pte Ltd  2448
Multicam Systems Pty Ltd  2139
Positive Camtec  2935
Anhui TEU Forklift Truck Co Ltd  1615-01
Changzhou Mingsheng Warehouse 
Equipment Co Ltd  1615-02
Eurocrane Australia  1715
Ezi-Duct Pty Ltd – Polex Environmental 
Engineering Pty Ltd  1719
Global Track Australia Pty Ltd  1707
Industrial Measurement Solutions Pty Ltd 1711
Kobot Systems Pty Ltd  1515
Millsom Materials Handling  1519
Mosca Australia  1814
QHDC Australia Pty Ltd  1609
Tianjin Master Storage 
Facilities Co Ltd  1605-01
Trilogiq Australia Pty Ltd  1718
Trio Packaging Systems  1813
UBEECO™ Packaging Solutions  1708
Visy Technology Systems  1815
Weifang Xiaoyu Commercial 
Equipment Co Ltd  1605-03
Wurth Australia Pty Ltd  1614
ADM Instrument Engineering  1119
AVT Services  1205
Better Springs  1211
GAP Plastomere Sarl  1201
HBM Test and Measurement  1304
Institute of Instrumentaton, Control & 
Automation (IICA)  1007
Oceanic Controls  1113
Portable Analytical Solutions Pty Ltd  1310
Precision One Pty Ltd  1209
Pressure and Safety Systems  1107
TechRentals  1212
Tecweigh Pty Ltd  1206
VACUFLEX GmbH  1201
Hodgkinson McInnes  2335
Melbourne Centre for Nanofabrication  2423
TXM–Total Excellence in Manufacturing  2422
Watermark  2434
BOC Limited  1025
Camfi l Australia  1348
Edro Tube & Pipe Equipment  1143
Ensitech Pty Ltd  1347&Demo H
Gullco International Pty Ltd  1245
Independent Wholesale Welding Supply  1337
Innovative Welding Pty Ltd  1146&Demo A
Metal Science Technologies Pty Ltd  1344
MIGAS  1327
Obara Australia Pty Ltd  1425
Panasonic Robot Welding Systems  1237
Plastral Pty Ltd  1444
Sheffi eld Blades  1345
Smenco Pty Ltd  1137
Supagas  1239
TeSuCo  1331
TIPTOP Industrial Development 
Co Ltd  1141-04
Tyrolit  1246&Demo E
Welding Technology Institute of Australia 1340
Yawata Electrode (Thailand) Co Ltd  1442
A1 Testing & Tagging Pty Ltd  2719
Colt International  3018
HR3  2909
National Safety Council of Australia Ltd  2816
Recruitaustralia.com  2723
SAI Global  2818
Spitwater  2919
Xtralis  2822
Exhibitor List by Product Zone

22  SYDNEY 13 – 16 MAY 2014
Product Index
ADDITIVE MANUFACTURING (3D PRINTING)
3D Printing Systems  1530
Amaero Engineering  1429
Composites Australia  2616
DGS 3D  1528
Hodgkinson McInnes  2335
Intercad Pty Ltd  1741
Laser & Sign Technology Pty Ltd  1431
Melbourne Centre for Nanofabrication  2423
New Zealand Engineering News  2343
NSW Department of Trade and Investment  1925
Pro Z 3D Solutions  1539
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
Renishaw Oceania Pty Ltd  2439
Roehlen Industries Pty Ltd  3433
SLM Solutions GmbH  1424
Stratasys  1437
Tianyi Chemicals (Qida Chemical)  3118
Yomura Technologies Inc  1409-02
ALUMINIUM&METALS
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Amaero Engineering  1429
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Blue Water Engineering Pty Ltd  2131
China Wellhope Industrial Ltd  3125-01
CIGWELD Pty Ltd  1037
Dongying Giayoung Precision Metal Co Ltd  2243
ETD Pty Ltd  1627
Green Kent Inc  1415-03
Guizhou Aerospace Industry Co Ltd  2100-03
Hont Electrical Co Ltd  1731-02
Illinois Enterprises Co  1315-08
Linear Technik Pty Ltd  1509
MIGAS  1327
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Pan Taiwan Enterprise Co Ltd  1415-04
Panasonic Robot Welding Systems  1237
Positive Camtec  2935
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
SigmaTEK Asia Pacifi c  1546
SLM Solutions GmbH  1424
Stanley Black & Decker  1015
Sun Industries  1724
Supagas  1239
Techfl ex Australia  1726
Technical Forgings NZ Ltd  2608
Tyrolit  1246 & Demo E
CAD/CAM/CAE&OTHER SPECIALIST SOFTWARE
ATS Applied Tech Systems  1549
Cadgroup Australia Pty Ltd  1541
Cadimage PLM  1447
Composites Australia  2616
Halo Business Intelligence (BI)  1746
Industrial Measurement Solutions Pty Ltd  1711
Intercad Pty Ltd  1741
Kinetic Cutting Systems  2849
Laser & Sign Technology Pty Ltd  1431
LEAP Australia  1639
Leussink Engineering Pty Ltd  1819
Manufacturers' Monthly/Ferret.com.au  1644
Multicam Systems Pty Ltd  2139
New Zealand Engineering News  2343
Positive Camtec  2935
Pro Z 3D Solutions  1539
Pronto Software Limited  1641
Radius Benders Pty Ltd  2125
Renishaw Oceania Pty Ltd  2439
Robert Bosch (Australia) Pty Ltd  1214
SigmaTEK Asia Pacifi c  1546
Syspro Australia Pty Ltd  1543
Tenanic Industrial Co Ltd  1415-01
The LS Starrett Company of Australia  2549
TMN Simulation  1547
Torema Engineering Pty Ltd  1525
CHEMICALS/MASTERBATCHES/RAW 
MATERIALS 
Autek Technology Corp  1409-01
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Coating Chemical Industry Co Ltd  3119
Guizhou Aerospace Industry Co Ltd  2100-03
Hodgkinson McInnes  2335
Indis Limited  3020
JDV Control Valves Co Ltd  1409-01
Ningbo Eagle New Material Co Ltd  3230-01
NSW Department of Trade and Investment  1925
Pacifi c Urethanes Pty Ltd  3035
Plasquip Sales  3112
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shenzhen Square Silicone Co Ltd  3125-03
Supagas  1239
Taizhou E-PLAS Packaging Co Ltd  2727-02
Techspan Australia Pty Ltd  1842
Tianyi Chemicals (Qida Chemical)  3118
Wurth Australia Pty Ltd  1614
COMPOSITES
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Blue Water Engineering Pty Ltd  2131
Composites Australia  2616
Henkel Australia (Loctite)  2025
JDV Control Valves Co Ltd  1409-01
Lavender Composites  2618
Pacifi c Urethanes Pty Ltd  3035
Rösler UK  2443
Shenzhen Square Silicone Co Ltd  3125-03
SigmaTEK Asia Pacifi c  1546
Syspro Australia Pty Ltd  1543
COMPUTER HARDWARE&PERIPHERALS
ATS Applied Tech Systems  1549
Dynacast  1828
Intercad Pty Ltd  1741
Motion Solutions Australia Pty Ltd  1329
Pan Taiwan Enterprise Co Ltd  1415-04
Positive Camtec  2935
Techfl ex Australia  1726
The LS Starrett Company of Australia  2549
Visy Technology Systems  1815
CONTRACT MANUFACTURING
ABO Electronics (Shenzhen) Co Ltd  1730-03
Amaero Engineering  1429
Asia Sourcing Corp  1415-07
ATS Applied Tech Systems  1549
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Blue Water Engineering Pty Ltd  2131
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
China Wellhope Industrial Ltd  3125-01
Composites Australia  2616
ETD Pty Ltd  1627
Guizhou Aerospace Industry Co Ltd  2100-03
Hi-Tech Metrology  2638
John Thompson  2545
Kap Components Australia Pty Ltd  2349
Leussink Engineering Pty Ltd  1819
Melbourne Centre for Nanofabrication  2423
MIGAS  1327
Pan Taiwan Enterprise Co Ltd  1415-04
Panasonic Robot Welding Systems  1237
Radius Benders Pty Ltd  2125
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
Rösler UK  2443
Shanghai Hishine Machinery Co Ltd  2110-01
SigmaTEK Asia Pacifi c  1546
SLM Solutions GmbH  1424
Taizhou E-PLAS Packaging Co Ltd  2727-02
Technical Forgings NZ Ltd  2608
TMN Simulation  1547
Trend Marking Systems  1405
Yomura Technologies Inc  1409-02
COOLANTS/CUTTING FLUIDS/OILS
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Roehlen Industries Pty Ltd  3433
Shanghai Sanyu Industry Co Ltd  2110-04
Shenzhen Anges Machinery Co Ltd  3024-03
Shenzhen Square Silicone Co Ltd  3125-03
Superior Lubricants  2249
Wurth Australia Pty Ltd  1614
CUSTOM MANUFACTURING
Amaero Engineering  1429
Apex Dynamics Australia  1318
Asia Plastik  3009
Asia Sourcing Corp  1415-07
Atical Collaborate International Co Ltd  1415-08
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Camfi l Australia  1348
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
China Wellhope Industrial Ltd  3125-01
Control Plus  1625
Guizhou Aerospace Industry Co Ltd  2100-03
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
HW Technologies  2519
John Thompson  2545
Kap Components Australia Pty Ltd  2349
Kelvindale Products Pty Ltd  2339
Lan Shiuon PTFE Industry Co Ltd  1415-06
Leussink Engineering Pty Ltd  1819
Linear Technik Pty Ltd  1509
Melbourne Centre for Nanofabrication  2423
MIGAS  1327
Motion Solutions Australia Pty Ltd  1329
Multicam Systems Pty Ltd  2139
Nextool Technology Co Ltd  2248
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Pacifi c Urethanes Pty Ltd  3035
Pan Taiwan Enterprise Co Ltd  1415-04
PBE-Roboplas Pty Ltd  2627
Positive Camtec  2935
Powerbox Australia Pty Ltd/M.Rutty & Co Pty Ltd  1824
Precision One Pty Ltd  1209
Radius Benders Pty Ltd  2125
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
nationalmanufacturingweek.com.au   23
Product Index
ReCoila Hose and Cord Reels  1015
Renz Australia Pty Ltd  2635
Rösler UK  2443
Shenzhen Square Silicone Co Ltd  3125-03
SigmaTEK Asia Pacifi c  1546
SLM Solutions GmbH  1424
Staetite Fasteners  2438
Sun Industries  1724
Taizhou E-PLAS Packaging Co Ltd  2727-02
TEA Transmissions Australia Pty Ltd  1215
Techfl ex Australia  1726
Technical Forgings NZ Ltd  2608
Tecweigh Pty Ltd  1206
Tenanic Industrial Co Ltd  1415-01
TMN Simulation  1547
Trilogiq Australia Pty Ltd  1718
Yomura Technologies Inc  1409-02
CUTTING TOOLS, TOOLING, TOOL 
HOLDERS&WORK HOLDERS
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Amag Industries Pty Ltd  3125-04
Atical Collaborate International Co Ltd  1415-08
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Blackwoods  1015 & 1037
Camfi l Australia  1348
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
China Wellhope Industrial Ltd  3125-01
CIGWELD Pty Ltd  1037
Dongying Giayoung Precision Metal Co Ltd  2243
Edro Tube & Pipe Equipment  1143
Gravotech Australia Pty Ltd  1408
Green Kent Inc  1415-03
Hont Electrical Co Ltd  1731-02
Independent Wholesale Welding Supply  1337
Josco  1015
KYOCERA Asia Pacifi c Pte Ltd  2448
Langfang Shengsen Abrasives Co Ltd  2400-04
Manufacturers' Monthly/Ferret.com.au  1644
Modern Tools  2239
Multicam Systems Pty Ltd  2139
Nextool Technology Co Ltd  2248
Nitto Kohki Australia Pty Ltd  2136
Norbar Torque Tools  1015
Performance Waterjet  2031
Plasquip Sales  3112
Positive Camtec  2935
Saint-Gobain  1037
Shanghai Ribo Industry Co Ltd  2110-03
Shanghai Sanyu Industry Co Ltd  2110-04
Sheffi eld Blades  1345
Smenco Pty Ltd  1137
Stanley Black & Decker  1015
Sutton Tools Pty Ltd  2734
TECHNI Waterjet Pty Ltd  1825
TeSuCo  1331
The LS Starrett Company of Australia  2549
TIME Group Inc  1404
Tyrolit  1246 & Demo E
Wurth Australia Pty Ltd  1614
ELECTRICAL&ACCESSORIES
A1 Testing & Tagging Pty Ltd  2719
ABO Electronics (Shenzhen) Co Ltd  1730-03
ADM Instrument Engineering  1119
Asia Sourcing Corp  1415-07
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Blackwoods  1015 & 1037
Bosbox  1736
Control Plus  1625
ETD Pty Ltd  1627
Fluke Australia Pty Ltd  1626
Future Lighting Australia Pty Ltd/Umart Online  2631
Green Kent Inc  1415-03
Intercad Pty Ltd  1741
Jiangsu Tongguang Optical Fiber Cable Co Ltd  1730-02
Jiangsu Weiteli Motors- Making Co Ltd  2300-02
Kelvindale Products Pty Ltd  2339
MIGAS  1327
Precision One Pty Ltd  1209
Shenzhen Square Silicone Co Ltd  3125-03
Sun Industries  1724
Sunlec International Pty Ltd  1637
Syspro Australia Pty Ltd  1543
Techfl ex Australia  1726
TechRentals  1212
TIME Group Inc  1404
Torema Engineering Pty Ltd  1525
Twin Screw Industrial Co Ltd  3115
Yomura Technologies Inc  1409-02
ELECTRONICS&ELECTRONIC COMPONENTS
ABO Electronics (Shenzhen) Co Ltd  1730-03
ADM Instrument Engineering  1119
Ampec Technologies Pty Ltd  1725
Asia Sourcing Corp  1415-07
Baosheng Science & Technology 
Innovation Co Ltd  1731-01
Concept Fasteners  2516
Control Plus  1625
Dongying Giayoung Precision Metal Co Ltd  2243
Dynacast  1828
ETD Pty Ltd  1627
Fluke Australia Pty Ltd  1626
Future Lighting Australia Pty Ltd/Umart Online  2631
Green Kent Inc  1415-03
Guizhou Aerospace Industry Co Ltd  2100-03
Hodgkinson McInnes  2335
Hont Electrical Co Ltd  1731-02
Institute of Instrumentaton, Control & 
Automation (IICA)  1007
Jiangsu Tongguang Optical Fiber Cable Co Ltd  1730-02
Jiangsu Weiteli Motors-Making Co Ltd  2300-02
Kelvindale Products Pty Ltd  2339
Kobot Systems Pty Ltd  1515
Motion Solutions Australia Pty Ltd  1329
Ningbo Yin Zhou Dutian Import & Export Co Ltd  1629
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Portable Analytical Solutions Pty Ltd  1310
Powerbox Australia Pty Ltd/M.Rutty & Co Pty Ltd  1824
Precision One Pty Ltd  1209
Robert Bosch (Australia) Pty Ltd  1214
Shanghai Sanyu Industry Co Ltd  2110-04
Sun Industries  1724
Sunlec International Pty Ltd  1637
Superior Lubricants  2249
Syspro Australia Pty Ltd  1543
Techfl ex Australia  1726
Technical Forgings NZ Ltd  2608
TechRentals  1212
Tecweigh Pty Ltd  1206
TIME Group Inc  1404
Torema Engineering Pty Ltd  1525
Yomura Technologies Inc  1409-02
Zhejiang Guidu Power Electronic Co Ltd  1830
ENGINEERING SERVICES
Apex Dynamics Australia  1318
Asia Sourcing Corp  1415-07
ATS Applied Tech Systems  1549
Blackwoods  1015 & 1037
Blue Water Engineering Pty Ltd  2131
BOC Limited  1025
Cadimage PLM  1447
Camfi l Australia  1348
CGB Precision Products Pty Ltd  2518
Colt International  3018
Control Plus  1625
Dalian TGI X-Trusion Technology Co Ltd  2727-04
Donaldson Australasia Pty Limited  2624
Dongying Giayoung Precision Metal Co Ltd  2243
Engineers Media  2541
Eurocrane Australia  1715
Ezi-Duct Pty Ltd - 
Polex Environmental Engineering Pty Ltd  1719
Filblast Pty Ltd  2531
Henkel Australia (Loctite)  2025
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
Hubei Fuyi Agricultural Machinery 
Manufacturing Co Ltd  2400-03
Institute of Instrumentaton, Control & 
Automation (IICA)  1007
Intercad Pty Ltd  1741
John Thompson  2545
Kap Components Australia Pty Ltd  2349
Kelvindale Products Pty Ltd  2339
Lan Shiuon PTFE Industry Co Ltd  1415-06
Lavender Composites  2618
LEAP Australia  1639
Leussink Engineering Pty Ltd  1819
Melbourne Centre for Nanofabrication  2423
MIGAS  1327
Motion Solutions Australia Pty Ltd  1329
New Zealand Engineering News  2343
Norbar Torque Tools  1015
Ogis Engineering Pty Ltd  2645
PBE-Roboplas Pty Ltd  2627
Pro Z 3D Solutions  1539
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
ReCoila Hose and Cord Reels  1015
Robert Bosch (Australia) Pty Ltd  1214
Shanghai Hishine Machinery Co Ltd  2110-01
Staetite Fasteners  2438
TEA Transmissions Australia Pty Ltd  1215
Techfl ex Australia  1726
Tecweigh Pty Ltd  1206
Tenanic Industrial Co Ltd  1415-01
TIME Group Inc  1404
TMN Simulation  1547
Torema Engineering Pty Ltd  1525
Trend Marking Systems  1405
TXM-Total Excellence in Manufacturing  2422
Westair SCR Australia Pty Ltd  2525
Wurth Australia Pty Ltd  1614
Yomura Technologies Inc  1409-02
ERP/SUPPLY CHAIN/E-PROCUREMENT
Asia Sourcing Corp  1415-07
ECi M1  1544
Halo Business Intelligence (BI)  1746
HansaWorld Australia Pty Ltd  1542
IndustrySearch.com.au  1508
Manufacturers' Monthly/Ferret.com.au  1644
NetSuite  1633
Sage Business Solutions Pty Ltd  1737
Star Business Solutions  1738
Syspro Australia Pty Ltd  1543
Taizhou E-PLAS Packaging Co Ltd  2727-02
Tenanic Industrial Co Ltd  1415-01
TMN Simulation  1547
24  SYDNEY 13 – 16 MAY 2014
Product Index
TXM-Total Excellence in Manufacturing  2422
Yomura Technologies Inc  1409-02
JIGS & FIXTURES
Amag Industries Pty Ltd  3125-04
Asia Sourcing Corp  1415-07
Concept Fasteners  2516
Independent Wholesale Welding Supply  1337
Leussink Engineering Pty Ltd  1819
Linear Technik Pty Ltd  1509
Norton Hardware  2140
Panasonic Robot Welding Systems  1237
Robert Bosch (Australia) Pty Ltd  1214
Stratasys  1437
The LS Starrett Company of Australia  2549
TIPTOP Industrial Development Co Ltd  1141-04
LEASING & FINANCE
TechRentals  1212
MACHINE TOOLS, OTHER
Amag Industries Pty Ltd  3125-04
Apex Dynamics Australia  1318
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Best Tooling (Shenzhen) Ltd  3025-02
CGB Precision Products Pty Ltd  2518
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
CIGWELD Pty Ltd  1037
Concept Fasteners  2516
Dalian TGI X-Trusion Technology Co Ltd  2727-04
DAVI/FES  1818
Dongying Giayoung Precision Metal Co Ltd  2243
Edro Tube & Pipe Equipment  1143
Filblast Pty Ltd  2531
Fluke Australia Pty Ltd  1626
Hi-Tech Metrology  2638
HW Technologies  2519
Intercad Pty Ltd  1741
Jean Cherng Enterprise Co Ltd  3113
Kelvindale Products Pty Ltd  2339
KYOCERA Asia Pacifi c Pte Ltd  2448
Laser & Sign Technology Pty Ltd  1431
Linear Technik Pty Ltd  1509
Lybina Pty Ltd  3012
Manufacturers' Monthly/Ferret.com.au  1644
Modern Tools  2239
Multicam Systems Pty Ltd  2139
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Nitto Kohki Australia Pty Ltd  2136
Norton Hardware  2140
Performance Waterjet  2031
Plastral Pty Ltd  1444
Positive Camtec  2935
Renishaw Oceania Pty Ltd  2439
Saint-Gobain  1037
Shanghai Sanyu Industry Co Ltd  2110-04
Sheffi eld Blades  1345
Smenco Pty Ltd  1137
Spitwater  2919
Stanley Black & Decker  1015
Superior Lubricants  2249
Syspro Australia Pty Ltd  1543
TEA Transmissions Australia Pty Ltd  1215
Tengzhou Tri-Union Machinery  2100-01
TeSuCo  1331
The Lincoln Electric Company  1037, 1231 & Demo F
The LS Starrett Company of Australia  2549
TIME Group Inc  1404
TIPTOP Industrial Development Co Ltd  1141-04
Trend Marking Systems  1405
Twin Screw Industrial Co Ltd  3115
Westair SCR Australia Pty Ltd  2525
Wurth Australia Pty Ltd  1614
YOKE Industrial Corp  3214
MACHINES, BAR & SECTION, SAWING
Beijing Muzi Carbon International Trade Co Ltd  2100-06
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
Edro Tube & Pipe Equipment  1143
Jiangsu Yangli Group Co Ltd  2300-01
Radius Benders Pty Ltd  2125
Tengzhou Tri-Union Machinery  2100-01
MACHINES, BORING & BROACHING
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
Edro Tube & Pipe Equipment  1143
Jean Cherng Enterprise Co Ltd  3113
Nitto Kohki Australia Pty Ltd  2136
Shanghai Ribo Industry Co Ltd  2110-03
Smenco Pty Ltd  1137
Tengzhou Tri-Union Machinery  2100-01
MACHINES, DRILLING, THREADING & TAPPING
Atical Collaborate International Co Ltd  1415-08
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
Edro Tube & Pipe Equipment  1143
Henkel Australia (Loctite)  2025
Independent Wholesale Welding Supply  1337
Jean Cherng Enterprise Co Ltd  3113
Kinetic Cutting Systems  2849
MIGAS  1327
Modern Tools  2239
Nitto Kohki Australia Pty Ltd  2136
Norbar Torque Tools  1015
Pan Taiwan Enterprise Co Ltd  1415-04
Radius Benders Pty Ltd  2125
Sheffi eld Blades  1345
Superior Lubricants  2249
Tengzhou Tri-Union Machinery  2100-01
Westair SCR Australia Pty Ltd  2525
Wurth Australia Pty Ltd  1614
MACHINES, FORMING & FABRICATING
Dalian Hawk King Forging- 
Casting Industrial Co Ltd  2210-01
DAVI/FES  1818
Edro Tube & Pipe Equipment  1143
Independent Wholesale Welding Supply  1337
Leussink Engineering Pty Ltd  1819
Lybina Pty Ltd  3012
Nitto Kohki Australia Pty Ltd  2136
NSW Department of Trade and Investment  1925
Panasonic Robot Welding Systems  1237
Plasquip Sales  3112
Plastral Pty Ltd  1444
Qingdao Huasu Machinery Fabricate Co Ltd  3024-04
Radius Benders Pty Ltd  2125
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03
Syspro Australia Pty Ltd  1543
TECHNI Waterjet Pty Ltd  1825
Tengzhou Tri-Union Machinery  2100-01
The Lincoln Electric Company  1037, 1231 & Demo F
MACHINES, GEAR CUTTING & FINISHING
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
Guizhou Aerospace Industry Co Ltd  2100-03
Jiangsu Yangli Group Co Ltd  2300-01
Metal Science Technologies Pty Ltd  1344
Performance Waterjet  2031
Rösler UK  2443
Shanghai Ribo Industry Co Ltd  2110-03
Smenco Pty Ltd  1137
Super Master Developing Co Ltd  1315-05
Superior Lubricants  2249
TEA Transmissions Australia Pty Ltd  1215
The Lincoln Electric Company  1037, 1231 & Demo F
Twin Screw Industrial Co Ltd  3115
MACHINES, GRINDING, HONING & POLISHING
Camfi l Australia  1348
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
Edro Tube & Pipe Equipment  1143
Filblast Pty Ltd  2531
Independent Wholesale Welding Supply  1337
Metal Science Technologies Pty Ltd  1344
Modern Tools  2239
Rösler UK  2443
Saint-Gobain  1037
Sheffi eld Blades  1345
Stanley Black & Decker  1015
Super Master Developing Co Ltd  1315-05
Tyrolit  1246 & Demo E
Westair SCR Australia Pty Ltd  2525
Wurth Australia Pty Ltd  1614
MACHINES, MARKING & ENGRAVING
Gravotech Australia Pty Ltd  1408
HW Technologies  2519
Kobot Systems Pty Ltd  1515
Laser & Sign Technology Pty Ltd  1431
Plasquip Sales  3112
Positive Camtec  2935
Roehlen Industries Pty Ltd  3433
Trend Marking Systems  1405
Visy Technology Systems  1815
White International Pty Ltd  1309
MACHINES, PLASMA, LASER, WATERJET & 
ULTRASONIC
Autek Technology Corp  1409-01
Blue Water Engineering Pty Ltd  2131
Camfi l Australia  1348
CIGWELD Pty Ltd  1037
Donaldson Australasia Pty Limited  2624
Filblast Pty Ltd  2531
Kinetic Cutting Systems  2849
Kobot Systems Pty Ltd  1515
Laser & Sign Technology Pty Ltd  1431
Melbourne Centre for Nanofabrication  2423
Millsom Materials Handling  1519
Multicam Systems Pty Ltd  2139
Panasonic Robot Welding Systems  1237
Performance Waterjet  2031
Plasquip Sales  3112
Positive Camtec  2935
Shanghai Hishine Machinery Co Ltd  2110-01
SigmaTEK Asia Pacifi c  1546
Smenco Pty Ltd  1137
TECHNI Waterjet Pty Ltd  1825
Tengzhou Tri-Union Machinery  2100-01
TeSuCo  1331
The Lincoln Electric Company  1037, 1231 & Demo F
Visy Technology Systems  1815
Westair SCR Australia Pty Ltd  2525
MACHINES, PUNCHING & SHEARING
Concept Fasteners  2516
Hont Electrical Co Ltd  1731-02
Jean Cherng Enterprise Co Ltd  3113
Millsom Materials Handling  1519
Nitto Kohki Australia Pty Ltd  2136
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03

26  SYDNEY 13 – 16 MAY 2014
Product Index
SigmaTEK Asia Pacifi c  1546
Tengzhou Tri-Union Machinery  2100-01
TIME Group Inc  1404
MACHINES, SHEETMETAL
Blue Water Engineering Pty Ltd  2131
Camfi l Australia  1348
Colt International  3018
Concept Fasteners  2516
Dalian Liming Steel Structure Co Ltd  2410-04
DAVI/FES  1818
Donaldson Australasia Pty Limited  2624
Intercad Pty Ltd  1741
Kelvindale Products Pty Ltd  2339
Manufacturers' Monthly/Ferret.com.au  1644
MIGAS  1327
Millsom Materials Handling  1519
Pan Taiwan Enterprise Co Ltd  1415-04
Performance Waterjet  2031
Shanghai Hishine Machinery Co Ltd  2110-01
SigmaTEK Asia Pacifi c  1546
TECHNI Waterjet Pty Ltd  1825
Tengzhou Tri-Union Machinery  2100-01
MACHINING CENTRES, LATHES & MILLING
Autek Technology Corp  1409-01
Camfi l Australia  1348
HW Technologies  2519
IndustrySearch.com.au  1508
Jean Cherng Enterprise Co Ltd  3113
Kinetic Cutting Systems  2849
Leussink Engineering Pty Ltd  1819
MIGAS  1327
Modern Tools  2239
Multicam Systems Pty Ltd  2139
New Zealand Engineering News  2343
Renishaw Oceania Pty Ltd  2439
Shanghai Ribo Industry Co Ltd  2110-03
Shanghai Sanyu Industry Co Ltd  2110-04
Tengzhou Tri-Union Machinery  2100-01
Twin Screw Industrial Co Ltd  3115
MATERIALS HANDLING/WAREHOUSING/ 
LOGISTICS
Amag Industries Pty Ltd  3125-04
Anhui TEU Forklift Truck Co Ltd  1615-01
Autek Technology Corp  1409-01
BAC Systems Pty Limited  2123
Blackwoods  1015 & 1037
Blue Water Engineering Pty Ltd  2131
BOC Limited  1025
Changzhou Mingsheng Warehouse 
Equipment Co Ltd  1615-02
Colt International  3018
Dalian Dianfeng Rubber Belt Co Ltd  2410-02
EHI Australia  1015
Eurocrane Australia  1715
GAP Plastomere Sarl  1201
Hurll Nu-Way Pty Ltd  2622
IndustrySearch.com.au  1508
Kobot Systems Pty Ltd  1515
Kockums Bulk Systems Pty Ltd  2231
Linear Technik Pty Ltd  1509
Manufacturers' Monthly/Ferret.com.au  1644
Melbourne Centre for Nanofabrication  2423
Millsom Materials Handling  1519
Modern Tools  2239
National Safety Council of Australia Ltd  2816
Ningbo Eagle New Material Co Ltd  3230-01
Obara Australia Pty Ltd  1425
QHDC Australia Pty Ltd  1609
STOREMASTA Products Australia  1015
TEA Transmissions Australia Pty Ltd  1215
Tenanic Industrial Co Ltd  1415-01
Trend Marking Systems  1405
Trilogiq Australia Pty Ltd  1718
Trio Packaging Systems  1813
Visy Technology Systems  1815
Weifang Xiaoyu Commercial Equipment Co Ltd  1605-03
YOKE Industrial Corp  3214
METALS & COMPOSITES
Blackwoods  1015 & 1037
Blue Water Engineering Pty Ltd  2131
CIGWELD Pty Ltd  1037
Composites Australia  2616
Dongying Giayoung Precision Metal Co Ltd  2243
Henkel Australia (Loctite)  2025
Hont Electrical Co Ltd  1731-02
JDV Control Valves Co Ltd  1409-01
Lavender Composites  2618
New Zealand Engineering News  2343
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Ogis Engineering Pty Ltd  2645
Pan Taiwan Enterprise Co Ltd  1415-04
Panasonic Robot Welding Systems  1237
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
Rösler UK  2443
SigmaTEK Asia Pacifi c  1546
Sun Industries  1724
Syspro Australia Pty Ltd  1543
Technical Forgings NZ Ltd  2608
The Lincoln Electric Company  1037, 1231 & Demo F
Tyrolit  1246 & Demo E
OH&S PRODUCTS
A1 Testing & Tagging Pty Ltd  2719
Blackwoods  1015 & 1037
Blue Water Engineering Pty Ltd  2131
BOC Limited  1025
Bosbox  1736
Changzhou Amec Group Co Ltd  2200-01
Colt International  3018
Control Plus  1625
Donaldson Australasia Pty Limited  2624
Dy-Mark  1015
Eximo speedLOCK  1015
Ezi-Duct Pty Ltd - 
Polex Environmental Engineering Pty Ltd  1719
Henkel Australia (Loctite)  2025
HR3  2909
HW Technologies  2519
Independent Wholesale Welding Supply  1337
Kockums Bulk Systems Pty Ltd  2231
Mayo Hardware  1015
Metal Science Technologies Pty Ltd  1344
Millsom Materials Handling  1519
Modern Tools  2239
National Safety Council of Australia Ltd  2816
Obara Australia Pty Ltd  1425
Spitwater  2919
STOREMASTA Products Australia  1015
Taizhou E-PLAS Packaging Co Ltd  2727-02
TeSuCo  1331
Trilogiq Australia Pty Ltd  1718
Trio Packaging Systems  1813
Wurth Australia Pty Ltd  1614
Xtralis  2822
PLASTICS –BAG/FILM/WRAPPING 
Beier Machinery Group  3025-03
CGB Precision Products Pty Ltd  2518
Hont Electrical Co Ltd  1731-02
Jwell Machinery (Shanghai) Co Ltd  3024-01
Ningbo Eagle New Material Co Ltd  3230-01
Roehlen Industries Pty Ltd  3433
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shenzhen Square Silicone Co Ltd  3125-03
Techspan Australia Pty Ltd  1842
PLASTICS –BLOW MOULDING 
Asia Plastik  3009
China Wellhope Industrial Ltd  3125-01
Dalian Rubber & Plastics Machinery Co Ltd  2410-03
Hont Electrical Co Ltd  1731-02
Jwell Machinery (Shanghai) Co Ltd  3024-01
Lan Shiuon PTFE Industry Co Ltd  1415-06
Magic MP SPA  3423
Ningbo Eagle New Material Co Ltd  3230-01
Pan Taiwan Enterprise Co Ltd  1415-04
PBE-Roboplas Pty Ltd  2627
Plasquip Sales  3112
Roehlen Industries Pty Ltd  3433
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shenzhen Square Silicone Co Ltd  3125-03
Superior Lubricants  2249
Taizhou E-PLAS Packaging Co Ltd  2727-02
Westair SCR Australia Pty Ltd  2525
PLASTICS –EXTRUSION
3D Printing Systems  1530
Autek Technology Corp  1409-01
Beier Machinery Group  3025-03
Dalian TGI X-Trusion Technology Co Ltd  2727-04
GAP Plastomere Sarl  1201
Jwell Machinery (Shanghai) Co Ltd  3024-01
Lybina Pty Ltd  3012
Matila Industrial Co Ltd  3212
Nextool Technology Co Ltd  2248
Ningbo Eagle New Material Co Ltd  3230-01
Pacifi c Urethanes Pty Ltd  3035
PBE-Roboplas Pty Ltd  2627
Plasquip Sales  3112
Plastral Pty Ltd  1444
Qingdao Huasu Machinery Fabricate Co Ltd  3024-04
Roehlen Industries Pty Ltd  3433
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shanghai Sanyu Industry Co Ltd  2110-04
Shenzhen Square Silicone Co Ltd  3125-03
Superior Lubricants  2249
Taizhou E-PLAS Packaging Co Ltd  2727-02
Techspan Australia Pty Ltd  1842
Twin Screw Industrial Co Ltd  3115
VACUFLEX GmbH  1201
PLASTICS –FOAM 
Dalian TGI X-Trusion Technology Co Ltd  2727-04
Jwell Machinery (Shanghai) Co Ltd  3024-01
Nextool Technology Co Ltd  2248
Ningbo Eagle New Material Co Ltd  3230-01
Pacifi c Urethanes Pty Ltd  3035
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shenzhen Square Silicone Co Ltd  3125-03
Techspan Australia Pty Ltd  1842
PLASTICS –INJECTION MOULDING
Amag Industries Pty Ltd  3125-04
Asia Plastik  3009
Asia Sourcing Corp  1415-07
Autek Technology Corp  1409-01
nationalmanufacturingweek.com.au   27
Product Index
Best Tooling (Shenzhen) Ltd  3025-02
China Wellhope Industrial Ltd  3125-01
Coating Chemical Industry Co Ltd  3119
Concept Fasteners  2516
Duromer Products Pty Ltd  2716
ETD Pty Ltd  1627
Fit Mould Co Ltd  2727-03
Hont Electrical Co Ltd  1731-02
Jean Cherng Enterprise Co Ltd  3113
Kelvindale Products Pty Ltd  2339
Li Jian Precision Mould Manufacture Co Ltd  3230-02
Ningbo Eagle New Material Co Ltd  3230-01
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Pacifi c Urethanes Pty Ltd  3035
Pan Taiwan Enterprise Co Ltd  1415-04
PBE-Roboplas Pty Ltd  2627
Plasquip Sales  3112
Roehlen Industries Pty Ltd  3433
Rösler UK  2443
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shanghai Kingsun Plastic Mould Co Ltd  3135
Shanghai Sanyu Industry Co Ltd  2110-04
Shenzhen Square Silicone Co Ltd  3125-03
Shenzhen Sunway Plastic Mould Co Ltd  3025-04
Stratasys  1437
Superior Lubricants  2249
Taizhou E-PLAS Packaging Co Ltd  2727-02
Taizhou Huangyan Yisen Mould Co Ltd  2727-01
Techspan Australia Pty Ltd  1842
VACUFLEX GmbH  1201
VEM Tooling Co Ltd  3019
Westair SCR Australia Pty Ltd  2525
Wittmann Battenfeld Australia  3023
Yomura Technologies Inc  1409-02
PLASTICS –THERMOFORMING
China Wellhope Industrial Ltd  3125-01
Concept Fasteners  2516
Hont Electrical Co Ltd  1731-02
Ningbo Eagle New Material Co Ltd  3230-01
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Pacifi c Urethanes Pty Ltd  3035
PBE-Roboplas Pty Ltd  2627
Plasquip Sales  3112
Roehlen Industries Pty Ltd  3433
Samhwa Corporation  3108
Taizhou E-PLAS Packaging Co Ltd  2727-02
Techspan Australia Pty Ltd  1842
Tianjin Taiyi Plastic Products Co Ltd  3125-02
Yomura Technologies Inc  1409-02
PNEUMATICS/AIR COMPRESSOR/HYDRAULICS
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Autek Technology Corp  1409-01
CGB Precision Products Pty Ltd  2518
Donaldson Australasia Pty Limited  2624
Fluke Australia Pty Ltd  1626
Green Kent Inc  1415-03
Henkel Australia (Loctite)  2025
Hurll Nu-Way Pty Ltd  2622
JDV Control Valves Co Ltd  1409-01
Kelvindale Products Pty Ltd  2339
Kockums Bulk Systems Pty Ltd  2231
Manufacturers' Monthly/Ferret.com.au  1644
New Zealand Engineering News  2343
Nitto Kohki Australia Pty Ltd  2136
Norbar Torque Tools  1015
PBE-Roboplas Pty Ltd  2627
ReCoila Hose and Cord Reels  1015
Risen Machinery Co Pty Ltd  2523
Super Master Developing Co Ltd  1315-05
Superior Lubricants  2249
Techspan Australia Pty Ltd  1842
Tianli Machine  2100-05
Westair SCR Australia Pty Ltd  2525
PRECISION MACHINING
Amag Industries Pty Ltd  3125-04
Apex Dynamics Australia  1318
Asia Sourcing Corp  1415-07
CGB Precision Products Pty Ltd  2518
China Wellhope Industrial Ltd  3125-01
Concept Fasteners  2516
Dongying Giayoung Precision Metal Co Ltd  2243
Hodgkinson McInnes  2335
Jean Cherng Enterprise Co Ltd  3113
Kap Components Australia Pty Ltd  2349
Lan Shiuon PTFE Industry Co Ltd  1415-06
Leussink Engineering Pty Ltd  1819
Manufacturers' Monthly/Ferret.com.au  1644
Melbourne Centre for Nanofabrication  2423
Modern Tools  2239
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Ogis Engineering Pty Ltd  2645
Pan Taiwan Enterprise Co Ltd  1415-04
Powerbox Australia Pty Ltd/M.Rutty & Co Pty Ltd  1824
Renishaw Oceania Pty Ltd  2439
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03
Staetite Fasteners  2438
Sutton Tools Pty Ltd  2734
Syspro Australia Pty Ltd  1543
Taizhou E-PLAS Packaging Co Ltd  2727-02
Technical Forgings NZ Ltd  2608
TIME Group Inc  1404
Westair SCR Australia Pty Ltd  2525
Yomura Technologies Inc  1409-02
PROCESS CONTROL/INSTRUMENTATION/
MEASUREMENT
Adept Turnkey Pty Ltd  1115
ADM Instrument Engineering  1119
Carl Zeiss Pty Ltd  2345
CGB Precision Products Pty Ltd  2518
Colt International  3018
Donaldson Australasia Pty Limited  2624
Dongying Giayoung Precision Metal Co Ltd  2243
Fluke Australia Pty Ltd  1626
HBM Test and Measurement  1304
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
HW Technologies  2519
Industrial Measurement Solutions Pty Ltd  1711
JDV Control Valves Co Ltd  1409-01
Kockums Bulk Systems Pty Ltd  2231
Melbourne Centre for Nanofabrication  2423
MIGAS  1327
Motion Solutions Australia Pty Ltd  1329
New Zealand Engineering News  2343
Oceanic Controls  1113
PBE-Roboplas Pty Ltd  2627
Portable Analytical Solutions Pty Ltd  1310
Powerbox Australia Pty Ltd/M.Rutty & Co Pty Ltd  1824
Precision One Pty Ltd  1209
Pressure and Safety Systems  1107
Renishaw Oceania Pty Ltd  2439
Robert Bosch (Australia) Pty Ltd  1214
Shanghai Sanyu Industry Co Ltd  2110-04
Stanley Black & Decker  1015
Sun Industries  1724
Tenanic Industrial Co Ltd  1415-01
TIME Group Inc  1404
PROTOTYPING
3D Printing Systems  1530
Best Tooling (Shenzhen) Ltd  3025-02
China Wellhope Industrial Ltd  3125-01
DGS 3D  1528
Dongying Giayoung Precision Metal Co Ltd  2243
Duromer Products Pty Ltd  2716
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
HW Technologies  2519
Melbourne Centre for Nanofabrication  2423
Motion Solutions Australia Pty Ltd  1329
Norton Hardware  2140
Ogis Engineering Pty Ltd  2645
Performance Waterjet  2031
Pro Z 3D Solutions  1539
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
Roehlen Industries Pty Ltd  3433
Staetite Fasteners  2438
Stratasys  1437
Sun Industries  1724
Tenanic Industrial Co Ltd  1415-01
Torema Engineering Pty Ltd  1525
RAPID MANUFACTURING/REPETITION 
ENGINEERING
Amaero Engineering  1429
Amag Industries Pty Ltd  3125-04
Best Tooling (Shenzhen) Ltd  3025-02
CGB Precision Products Pty Ltd  2518
Concept Fasteners  2516
Control Plus  1625
Fit Mould Co Ltd  2727-03
Henkel Australia (Loctite)  2025
Hi-Tech Metrology  2638
Hodgkinson McInnes  2335
Innovative Welding Pty Ltd  1146 & Demo A
Intercad Pty Ltd  1741
New Zealand Engineering News  2343
Ogis Engineering Pty Ltd  2645
Pro Z 3D Solutions  1539
Radius Benders Pty Ltd  2125
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
Rösler UK  2443
Staetite Fasteners  2438
Stratasys  1437
Superior Lubricants  2249
Tenanic Industrial Co Ltd  1415-01
ROBOTICS & AUTOMATION 
Adept Turnkey Pty Ltd  1115
ADM Instrument Engineering  1119
ATS Applied Tech Systems  1549
Blue Water Engineering Pty Ltd  2131
BOC Limited  1025
CGB Precision Products Pty Ltd  2518
Control Plus  1625
Edro Tube & Pipe Equipment  1143
Green Kent Inc  1415-03
Independent Wholesale Welding Supply  1337
Industrial Measurement Solutions Pty Ltd  1711
IndustrySearch.com.au  1508
Innovative Welding Pty Ltd  1146 & Demo A
Institute of Instrumentaton, Control & 
Automation (IICA)  1007
Kockums Bulk Systems Pty Ltd  2231
Leussink Engineering Pty Ltd  1819
28  SYDNEY 13 – 16 MAY 2014
Product Index
Linear Technik Pty Ltd  1509
Manufacturers' Monthly/Ferret.com.au  1644
Millsom Materials Handling  1519
Motion Solutions Australia Pty Ltd  1329
Multicam Systems Pty Ltd  2139
New Zealand Engineering News  2343
Ningbo Haitian Huayuan Machinery Co Ltd  3331
NSW Department of Trade and Investment  1925
Panasonic Robot Welding Systems  1237
PBE-Roboplas Pty Ltd  2627
Powerbox Australia Pty Ltd/M.Rutty&Co Pty Ltd  1824
Renishaw Oceania Pty Ltd  2439
Robert Bosch (Australia) Pty Ltd  1214
SigmaTEK Asia Pacifi c  1546
Smenco Pty Ltd  1137
TEA Transmissions Australia Pty Ltd  1215
Techfl ex Australia  1726
TECHNI Waterjet Pty Ltd  1825
Tenanic Industrial Co Ltd  1415-01
The Lincoln Electric Company  1037, 1231 & Demo F
Trend Marking Systems  1405
Visy Technology Systems  1815
Wittmann Battenfeld Australia  3023
SERVICE&MAINTENANCE
A1 Testing & Tagging Pty Ltd  2719
ADM Instrument Engineering  1119
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
ATS Applied Tech Systems  1549
CGB Precision Products Pty Ltd  2518
CIGWELD Pty Ltd  1037
Colt International  3018
Control Plus  1625
Dalian TGI X-Trusion Technology Co Ltd  2727-04
Donaldson Australasia Pty Limited  2624
EHI Australia  1015
Eurocrane Australia  1715
Filblast Pty Ltd  2531
Future Lighting Australia Pty Ltd/Umart Online  2631
Halo Business Intelligence (BI)  1746
Henkel Australia (Loctite)  2025
Josco  1015
Laser & Sign Technology Pty Ltd  1431
Linear Technik Pty Ltd  1509
Lybina Pty Ltd  3012
Mayo Hardware  1015
MIGAS  1327
Motion Solutions Australia Pty Ltd  1329
Norbar Torque Tools  1015
Obara Australia Pty Ltd  1425
PBE-Roboplas Pty Ltd  2627
Portable Analytical Solutions Pty Ltd  1310
Positive Camtec  2935
Pro Z 3D Solutions  1539
QHDC Australia Pty Ltd  1609
ReCoila Hose and Cord Reels  1015
Rösler UK  2443
Spitwater  2919
Stanley Black & Decker  1015
Supagas  1239
Techfl ex Australia  1726
Torema Engineering Pty Ltd  1525
Westair SCR Australia Pty Ltd  2525
Wurth Australia Pty Ltd  1614
YOKE Industrial Corp  3214
SUSTAINABILITY –ALTERNATIVE ENERGY/
BIODEGRADABLE MATERIALS
Blackwoods  1015 & 1037
CGB Precision Products Pty Ltd  2518
Coating Chemical Industry Co Ltd  3119
Dalian TGI X-Trusion Technology Co Ltd  2727-04
Future Lighting Australia Pty Ltd/Umart Online  2631
Hodgkinson McInnes  2335
John Thompson  2545
Manufacturers' Monthly/Ferret.com.au  1644
Matila Industrial Co Ltd  3212
Melbourne Centre for Nanofabrication  2423
Ningbo Eagle New Material Co Ltd  3230-01
Rapid Advanced Manufacturing Limited (R.A.M.)
and S.A.F.E. Ltd  1424
SLM Solutions GmbH  1424
SUSTAINABILITY –CONSULTANTS
Colt International  3018
HW Technologies  2519
National Safety Council of Australia Ltd  2816
SUSTAINABILITY –HEATING/COOLING/CARBON 
REDUCTION
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Colt International  3018
Eximo speedLOCK  1015
Future Lighting Australia Pty Ltd/Umart Online  2631
HW Technologies  2519
John Thompson  2545
Shenzhen Anges Machinery Co Ltd  3024-03
Spitwater  2919
Techspan Australia Pty Ltd  1842
SUSTAINABILITY –WASTE MINIMISATION/
RECYCLING 
JDV Control Valves Co Ltd  1409-01
Renz Australia Pty Ltd  2635
TOOLMAKING
Asia Sourcing Corp  1415-07
Best Tooling (Shenzhen) Ltd  3025-02
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
China Wellhope Industrial Ltd  3125-01
Dalian TGI X-Trusion Technology Co Ltd  2727-04
ETD Pty Ltd  1627
Fit Mould Co Ltd  2727-03
Green Kent Inc  1415-03
Henkel Australia (Loctite)  2025
Jean Cherng Enterprise Co Ltd  3113
Kelvindale Products Pty Ltd  2339
Leussink Engineering Pty Ltd  1819
Li Jian Precision Mould Manufacture Co Ltd  3230-02
Linear Technik Pty Ltd  1509
Modern Tools  2239
Mumme Tools Pty Ltd  1015
Nextool Technology Co Ltd  2248
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Norton Hardware  2140
Performance Waterjet  2031
Roehlen Industries Pty Ltd  3433
Sutton Tools Pty Ltd  2734
Taizhou Huangyan Yisen Mould Co Ltd  2727-01
Techspan Australia Pty Ltd  1842
The LS Starrett Company of Australia  2549
Trend Marking Systems  1405
VEM Tooling Co Ltd  3019
VISION/CAMERA TECHNOLOGIES&SCANNERS
ABO Electronics (Shenzhen) Co Ltd  1730-03
Adept Turnkey Pty Ltd  1115
ATS Applied Tech Systems  1549
Control Plus  1625
Fluke Australia Pty Ltd  1626
Hi-Tech Metrology  2638
HW Technologies  2519
Innovative Welding Pty Ltd  1146 & Demo A
Motion Solutions Australia Pty Ltd  1329
Multicam Systems Pty Ltd  2139
Panasonic Robot Welding Systems  1237
Smenco Pty Ltd  1137
TechRentals  1212
The LS Starrett Company of Australia  2549
Visy Technology Systems  1815
WELDING/JOINING/HEAT TREATMENT/
COATING/ABRASIVES
Autek Technology Corp  1409-01
Blackwoods  1015 & 1037
BOC Limited  1025
Camfi l Australia  1348
CIGWELD Pty Ltd  1037
Dalian Hawk King Forging-Casting Industrial Co Ltd  2210-01
Dalian Liming Steel Structure Co Ltd  2410-04
Donaldson Australasia Pty Limited  2624
Dongying Giayoung Precision Metal Co Ltd  2243
Dy-Mark  1015
Edro Tube & Pipe Equipment  1143
Eurocrane Australia  1715
Filblast Pty Ltd  2531
Henkel Australia (Loctite)  2025
Hont Electrical Co Ltd  1731-02
Independent Wholesale Welding Supply  1337
IndustrySearch.com.au  1508
Innovative Welding Pty Ltd  1146 & Demo A
JDV Control Valves Co Ltd  1409-01
Josco  1015
Kelvindale Products Pty Ltd  2339
Kobot Systems Pty Ltd  1515
Lybina Pty Ltd  3012
Modern Tools  2239
New Zealand Engineering News  2343
Nextool Technology Co Ltd  2248
Nitto Kohki Australia Pty Ltd  2136
Norton Hardware  2140
Obara Australia Pty Ltd  1425
Ogis Engineering Pty Ltd  2645
Panasonic Robot Welding Systems  1237
Plasquip Sales  3112
Plastral Pty Ltd  1444
ReCoila Hose and Cord Reels  1015
Risen Machinery Co Pty Ltd  2523
Rösler UK  2443
Saint-Gobain  1037
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03
Shanghai Sanyu Industry Co Ltd  2110-04
Sheffi eld Blades  1345
SLM Solutions GmbH  1424
Smenco Pty Ltd  1137
Stanley Black & Decker  1015
Supagas  1239
Super Master Developing Co Ltd  1315-05
Sutton Tools Pty Ltd  2734
Syspro Australia Pty Ltd  1543
Techfl ex Australia  1726
Techspan Australia Pty Ltd  1842
TeSuCo  1331
The Lincoln Electric Company  1037, 1231 & Demo F
Tyrolit  1246 & Demo E
Welding Technology Institute of Australia  1340
Wurth Australia Pty Ltd  1614
Wuxi Kenke Heavy Industry Equipment Co Ltd  2200-04
Yawata Electrode (Thailand) Co Ltd  1442
nationalmanufacturingweek.com.au   29
Brand Index
3-IN-1 
Tengzhou Tri-Union Machinery    2100-01
3500 HD MAX 3D PRINTER 
Pro Z 3D Solutions   1539 
A N COOKE MANUFACTURING 
Staetite Fasteners    2438 
A&T 
Green Kent Inc   1415-03 
ADPRO 
Xtralis    2822 
ADVANCED ENGINEERING BRAIDED 
SLEEVING 
Techfl ex Australia    1726 
ADVANCED ILLUMINATION, BMT, CCS. 
COHERENT LIGHTING 
Adept Turnkey Pty Ltd    1115 
AGILENT 
TechRentals    1212 
AIRTAC 
Industrial Dynamics     1318 
ALPHA 
Sheffi eld Blades    1345
AMEC 
Sutton Tools Pty Ltd   2734 
AMORIM 
Lavender Composites    2618 
ANGES 
Shenzhen Anges Machinery Co Ltd   3024-03 
ANRITSU 
TechRentals    1212 
ANSYS 
LEAP Australia   1639 
APM HEXSEAL 
Concept Fasteners    2516 
APOLLO 
Colt International    3018 
ARCAIR 
CIGWELD Pty Ltd    1037 
ARCFORCE 
Independent Wholesale Welding Supply   1337 
ARGUS 
Positive Camtec    2935 
ARI ARMATUREN 
Pressure and Safety Systems   1107 
AST 
Asia Sourcing Corp    1415-07 
AUSFA 
Tenanic Industrial Co Ltd   1415-01 
AUSPEG 
Jubilee Spring Co   2539 
AUSTRAP 
Jubilee Spring Co   2539
AUTODESK 
Cadgroup Australia Pty Ltd   1541
AXIS LASER 
Plasquip Sales   3112 
AXXAIR 
Edro Tube & Pipe Equipment   1143 
BABY LIGHTING 
Future Lighting Australia Pty Ltd/
Umart Online   2631 
BALON CORPORATION 
Oceanic Controls   1113 
BATTENFELD 
Wittmann Battenfeld Australia    3023 
BEL-RAY 
Superior Lubricants    2249 
BELGAS 
Oceanic Controls   1113 
BEND-TECH PIPE BENDING PROGRAM 
SOFTWARE 
Radius Benders Pty Ltd   2125 
BIOREM 
Centralised Pumping Systems   1831 
BLACK BOOK 
Sutton Tools Pty Ltd   2734 
BOLTSTRESS 
Norbar Torque Tools    1015 
BOSCH 
Robert Bosch (Australia) Pty Ltd   1214 
BOSCH REXROTH 
Linear Technik Pty Ltd   1509
Robert Bosch (Australia) Pty Ltd   1214 
BOWMET 
CGB Precision Products Pty Ltd   2518 
BOXX TECHNOLOGIES 
Intercad Pty Ltd     1741 
BRANDS PRONTO XI 
Pronto Software Limited    1641
BROWN&SHARPE 
Hi-Tech Metrology   2638 
BRUMBY 
Josco    1015 
BRUSHWORKS 
Josco    1015 
BT MOLD 
Best Tooling (Shenzhen) Ltd   3025-02 
BUCKLEYS 
Plastral Pty Ltd   1444
BUG-O 
Smenco Pty Ltd   1137 
CAB 
Visy Technology Systems   1815 
CAMERON 
Oceanic Controls   1113 
CAPTIVE FASTENER 
Concept Fasteners    2516 
CASTOLIN-EUTECTIC 
Smenco Pty Ltd   1137 
CDBP 
Chengdu Bangpu Alloy Materials
Co Ltd   2100-02 
CEMBRE 
Nitto Kohki Australia Pty Ltd    2136 
CERATIZIT 
Sutton Tools Pty Ltd   2734 
CERPOL 
Pacifi c Urethanes Pty Ltd    3035 
CHAMBRELAN 
Integrated Emergency &
Industrial Equipment     2738 
CHEMFREE 
Centralised Pumping Systems   1831 
CHEMTECH 
ITW AAMTech   1015 
CLEVERMODE 
A1 Testing & Tagging Pty Ltd   2719 
CLIPPER 
Saint-Gobain    1037 
CLOSURES/CAPS 
Taizhou E-PLAS Packaging Co Ltd    2727-02 
CMC 
CGB Precision Products Pty Ltd   2518 
CNCFLEX 
Eximo speedLOCK   1015 
COATING 
Coating Chemical Industry Co Ltd   3119 
Jean Cherng Enterprise Co Ltd    3113 
CODEMA 
Plasquip Sales   3112 
COLINBUS 
HW Technologies    2519 
COOLSTREAM 
Colt International    3018 
CORAL 
Obara Australia Pty Ltd   1425 
CORTS BEARING SOLUTIONS 
Leussink Engineering Pty Ltd   1819
30  SYDNEY 13 – 16 MAY 2014
BRAND Index
COSEL 
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd   1824 
CRIZAF 
PBE-Roboplas Pty Ltd    2627 
CSM TUBE AND PIPE BENDING MACHINES 
Radius Benders Pty Ltd   2125 
CUBE 
3D Systems Asia Pacifi c    1537
CUBEX 
3D Systems Asia Pacifi c    1537
CYTEC 
Lavender Composites    2618 
DABASIX 
Linear Technik Pty Ltd   1509
DACROTIZEDR 
NOF Metal Coatings Asia Pacifi c Co Ltd    2612 
DELFIN 
Spitwater    2919 
DELTA ELECTRONICS 
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd   1824
DEMAG PLASTICS GROUP 
PBE-Roboplas Pty Ltd    2627 
DEMMELER JIGGING&FABRICATION 
SYSTEMS 
Leussink Engineering Pty Ltd   1819 
DEMO3D MATERIALS HANDLING 
Glenvern Associates Pty Ltd   1647 
DEPURECO 
Obara Australia Pty Ltd   1425 
DEWALT 
Stanley Black & Decker   1015 
DI CANDIA 
QHDC Australia Pty Ltd   1609 
DOW HYPERLAST 
Pacifi c Urethanes Pty Ltd    3035 
DR 
Green Kent Inc   1415-03 
DR. STORAGE 
Kobot Systems Pty Ltd    1515 
DUALVEE 
TEA Transmissions Australia Pty Ltd   1215 
DUNKERMOTOREN 
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd   1824 
DURAFORM 
Duromer Products Pty Ltd   2716 
DURALLOY 
Duromer Products Pty Ltd   2716 
DURALON 
Duromer Products Pty Ltd   2716
DURAMID 
Duromer Products Pty Ltd   2716 
DURAPROP 
Duromer Products Pty Ltd   2716 
DYNA-PURGE PURGING COMPOUNDS 
Techspan Australia Pty Ltd   1842 
DYNAFLO CONTROL VALVES 
Oceanic Controls   1113 
E-DRIVE 
Industrial Dynamics     1318 
E-PLAS 
Taizhou E-PLAS Packaging Co Ltd    2727-02 
EAGLE 
Ningbo Eagle New Material Co Ltd    3230-01 
ECO LINE 
Leussink Engineering Pty Ltd   1819 
ECO PALLETS 
UBEECO™ Packaging Solutions    1708 
ECOGATER 
Donaldson Australasia Pty Limited    2624 
EGL 
Ningbo Eagle New Material Co Ltd    3230-01 
ELABO 
HW Technologies    2519 
ELECTRIC HOISTS 
Global Track Australia Pty Ltd   1707 
ELFAB 
Pressure and Safety Systems   1107 
ELMA ULTRASONICS ULTRASONIC 
CLEANERS 
Techspan Australia Pty Ltd   1842
EMULATE3D CONTROLS TESTING 
Glenvern Associates Pty Ltd   1647 
ENTERPRISE BY HANSAWORLD 
HansaWorld Australia Pty Ltd   1542 
ENVIROPAC 
John Thompson    2545 
ENVISIONTEC 
Laser & Sign Technology Pty Ltd   1431 
EPSON ROBOTS 
Motion Solutions Australia Pty Ltd   1329
ERGOPACK 
Trio Packaging Systems    1813 
ERP SOFTWARE 
Syspro Australia Pty Ltd   1543 
ESI 
ADM Instrument Engineering   1119 
ESSENTRA COMPONENTS 
Concept Fasteners    2516 
EUROBOOR 
Sheffi eld Blades    1345 
EUROBOSS 
Edro Tube & Pipe Equipment   1143 
EUROPAC 
John Thompson    2545 
EUROPLASMA 
Kobot Systems Pty Ltd    1515 
EUROPRESS | STAINLESS STEEL PRESSFIT 
SYSTEM 
Allmach Pneumatic&Fluid Systems
Pty Ltd   2535 
EWM 
BOC Limited    1025 
EXACTFLAT 
Intercad Pty Ltd     1741 
EXPERT LINE 
Leussink Engineering Pty Ltd   1819 
EXTREME FILTERS 
Camfi l Australia    1348 
EXTREME HI TEMPERATURE BRAIDED 
SLEEVING 
Techfl ex Australia    1726 
FACTORY EQUIPMENT NEWS (FEN) 
Manufacturers’ Monthly/Ferret.com.au   1644 
FALCON 
JDV Control Valves Co Ltd   1409-01 
FALCON | FILTRATION AND DRYERS 
Allmach Pneumatic & Fluid Systems
Pty Ltd   2535 
FARR GOLD SERIES 
Camfi l Australia    1348 
FEMAP 
Cadimage PLM    1447 
FERRET.COM.AU 
Manufacturers’ Monthly/Ferret.com.au   1644 
FESTOOL AUSTRALIA 
Tyrolit    1246 & Demo E
FILCAR 
Obara Australia Pty Ltd   1425 
FIRST 
Modern Tools   2239 
FLEXACIER 
GAP Plastomere Sarl    1201 
FLEXIDOME RESIN BADGES 
Sun Industries   1724 
FLEXOVIT 
Saint-Gobain    1037 
FLEXSIM DECISION SUPPORT SOFTWARE 
TMN Simulation   1547 
FLUKE 
Fluke Australia Pty Ltd   1626 
TechRentals    1212 
FLUKE CALIBRATION 
Fluke Australia Pty Ltd   1626  
nationalmanufacturingweek.com.au   31
BRAND Index
FLURO 
CGB Precision Products Pty Ltd   2518 
FLYWHEEL 
QHDC Australia Pty Ltd   1609
FOODFLEX 
Eximo speedLOCK   1015 
FRONIUS 
Smenco Pty Ltd   1137 
FS CURTIS 
Filblast Pty Ltd   2531 
FUYI 
Hubei Fuyi Agricultural Machinery 
Manufacturing Co Ltd   2400-03 
GALILEO VISION SYSTEMS 
The LS Starrett Company of Australia   2549
GAMBINI MECCANICA 
Industrial Dynamics     1318 
GARRYSON 
Josco    1015 
GE ROOTS 
Hurll Nu-Way Pty Ltd    2622 
GEISS 
Plasquip Sales   3112
GENTEC/GENLOK 
TeSuCo    1331
GEOMAGIC 
Pro Z 3D Solutions   1539 
GEOMETR 
NOF Metal Coatings Asia Pacifi c Co Ltd    2612 
GERFLAIR 
GAP Plastomere Sarl    1201 
GERFLAT 
GAP Plastomere Sarl    1201 
GERFLUID 
GAP Plastomere Sarl    1201 
GERTRESS 
GAP Plastomere Sarl    1201 
GFAITECH 
HW Technologies    2519 
GHIBLI 
Spitwater    2919 
GLENPRO PROCESS OPTIMISATION 
Glenvern Associates Pty Ltd   1647
GLOBAL WELD ROD 
Lybina Pty Ltd   3012
GMA GARNET 
Performance Waterjet    2031
GOETZE 
Pressure and Safety Systems   1107 
GOYO, KOWA, SCHNEIDER, OPTO LENSES 
Adept Turnkey Pty Ltd    1115 
GRAPHIT 
Trilogiq Australia Pty Ltd   1718 
GRAVOGRAPH 
Gravotech Australia Pty Ltd    1408 
GREENTREE 
Star Business Solutions    1738 
GRW 
CGB Precision Products Pty Ltd   2518 
GRYDALE 
Filblast Pty Ltd   2531
GUYU 
Shanghai Sanyu Industry Co Ltd   2110-04 
GYLED 
Shanxi Guangyu LED Lighting Co Ltd   1730-01 
H20JET 
Performance Waterjet    2031
HAION 
QHDC Australia Pty Ltd   1609 
HAITIAN 
Ningbo Haitian Huayuan Machinery
Co Ltd   3331
HALO 
Halo Business Intelligence (BI)    1746 
HEAVY DUTY BRAIDED SLEEVING 
Techfl ex Australia    1726
HEITEL 
Xtralis    2822 
HEMIPLEAT 
Camfi l Australia    1348 
HEPCOMOTION 
TEA Transmissions Australia Pty Ltd   1215
HEXAGON METROLOGY 
Hi-Tech Metrology   2638 
HF-TL 
Tianli Machine   2100-05 
HIROSE 
Ampec Technologies Pty Ltd   1725 
HITACHI 
Hurll Nu-Way Pty Ltd    2622 
Visy Technology Systems   1815 
HIWIN 
Industrial Dynamics     1318
Hiwin Technologies Corp   1315-01
HM SYSTEMS 
Visy Technology Systems   1815 
HOLYPAN 
Lavender Composites    2618
HOMMEL 
Hi-Tech Metrology   2638 
HONGDA GROUP 
Indis Limited     3020 
HSD 
Multicam Systems Pty Ltd   2139 
HSK 
Lybina Pty Ltd   3012 
HSM 
Renz Australia Pty Ltd   2635 
HUAFA 
Ningbo Eagle New Material Co Ltd    3230-01 
HUASU 
Qingdao Huasu Machinery Fabricate
Co Ltd   3024-04 
HUCO DYNATORK 
TEA Transmissions Australia Pty Ltd   1215 
HRNER 
Lybina Pty Ltd   3012
HW 
Hua Wei Industrial Co Ltd   1315-04 
HWACHEON 
Modern Tools   2239 
HYPERTHERM 
Kinetic Cutting Systems   2849 
IBEDA 
TeSuCo    1331 
IC3D STEEL 
Intercad Pty Ltd     1741 
INDUSTRY UPDATE 
Industry Update Media     1817 
INGENIA 
Plasquip Sales   3112 
INNOVATIVE PLASTICS 
Laser & Sign Technology Pty Ltd   1431 
INOR 
Precision One Pty Ltd   1209 
ISOMOUNT 
Mackay Consolidated Industries Pty Ltd    2639 
JASIC 
Independent Wholesale Welding Supply   1337 
JBS TOOLS 
Blackwoods    1015 & 1037
JETFIRE 
Spitwater    2919 
JETLINE 
Innovative Welding Pty Ltd   1146 & Demo A
JIB CRANES 
Global Track Australia Pty Ltd   1707 
JIH-I SAWS 
Radius Benders Pty Ltd   2125
JOHNSON METTHEY 
Precision One Pty Ltd   1209
32  SYDNEY 13 – 16 MAY 2014
K-TIG 
Innovative Welding Pty Ltd   1146 & Demo A
K5000XMC 
Kinetic Cutting Systems   2849 
KAYSER 
TeSuCo    1331
KEMPER 
Smenco Pty Ltd   1137 
KERN 
Positive Camtec    2935 
KEVVOX 
3D Printing Systems   1530 
KEYENCE SENSORS 
Motion Solutions Australia Pty Ltd   1329 
KILEWS 
Kobot Systems Pty Ltd    1515 
KIMRAY 
Oceanic Controls   1113 
KISTLER/CORRSYS-DATRON 
Industrial Measurement Solutions Pty Ltd   1711
KLEIN TOOLS 
Mumme Tools Pty Ltd   1015
KMT 
Performance Waterjet    2031 
KRONENFLEX 
KLINGSPOR Australia Pty Ltd   2224 
KUKEN 
Nitto Kohki Australia Pty Ltd    2136 
LABEL-AIRE 
Visy Technology Systems   1815 
LABYRINTH 
Colt International    3018 
LEANTEK 
Trilogiq Australia Pty Ltd   1718 
LEICA GEOSYSTEMS 
Industrial Measurement Solutions Pty Ltd   1711 
LEISTER 
Plastral Pty Ltd   1444 
LIDER 
Hebei Xinlong Casting Co Ltd   2310-04 
LINCOLN 
Blackwoods   1015 & 1037
The Lincoln Electric Company  1037,1231&Demo F
LIQUIFLEX 
Eximo speedLOCK   1015 
LMI TECHNOLOGY, MESA, PHOTONFOCUS 
3D SMART CAMERAS 
Adept Turnkey Pty Ltd    1115 
LOCTITE 
Henkel Australia (Loctite)    2025 
LUBRIPLATE 
Superior Lubricants    2249 
LUTRON 
ADM Instrument Engineering   1119
MACHINERYSELLER.CO.NZ 
New Zealand Engineering News   2343 
MANMONTHLY.COM.AU 
Manufacturers’ Monthly/Ferret.com.au   1644 
MARCO 
Filblast Pty Ltd   2531 
MASTER 
Wurth Australia Pty Ltd    1614 
MASTER LOCK 
Mayo Hardware    1015 
MASTERSHRED 
Renz Australia Pty Ltd   2635 
MATDAN 
Concept Fasteners    2516 
MATHREAD 
Staetite Fasteners    2438 
MAXABRASE 
Sheffi eld Blades    1345 
MAXAIR | PE100 PN25 PLASTIC PIPING 
SYSTEM 
Allmach Pneumatic & Fluid Systems
Pty Ltd   2535 
MCOR TECHNOLOGIES PAPER 3D PRINTERS 
DGS 3D   1528 
MEAN WELL 
ADM Instrument Engineering   1119 
MEDO 
Nitto Kohki Australia Pty Ltd    2136 
MEGGER 
TechRentals    1212 
MEMBERSHIP - CORPORATE AND 
INDIVIDUAL PACKAGES 
National Safety Council of Australia Ltd   2816 
MEPBLITZ DC-I5 
Metal Science Technologies Pty Ltd   1344 
METAL/SHIELDING BRAIDED SLEEVING 
Techfl ex Australia    1726 
METYX 
Lavender Composites    2618 
MICROPAC 
John Thompson    2545 
MICROVU 
Hi-Tech Metrology   2638 
MIDORI 
ADM Instrument Engineering   1119 
MIDWEST 
Josco    1015 
MIKROSYSTEM 
Hiwin Technologies Corp    1315-01 
MILLSOM 
Millsom Materials Handling    1519 
MIYACHI 
Kobot Systems Pty Ltd    1515 
MOLD-TECH 
Roehlen Industries Pty Ltd   3433 
MONORAILS 
Global Track Australia Pty Ltd   1707 
MSI 
UBEECO™ Packaging Solutions    1708 
MULTIBUFFER 
Mackay Consolidated Industries Pty Ltd    2639 
MULTICUSHION 
Mackay Consolidated Industries Pty Ltd    2639 
MUVTONS 
QHDC Australia Pty Ltd   1609 
NATIONAL SAFETY MAGAZINE 
National Safety Council of Australia Ltd   2816 
NEUTREX 
Plasquip Sales   3112 
NIEZGODKA 
Pressure and Safety Systems   1107 
NITON 
Portable Analytical Solutions Pty Ltd    1310 
NORRES FLEXIBLE HOSE 
Ezi-Duct Pty Ltd - 
Polex Environmental Engineering Pty Ltd    1719 
NORTON 
Saint-Gobain    1037 
NX NASTRAN 
Cadimage PLM    1447 
NZ ENGINEERING NEWS 
New Zealand Engineering News   2343 
OASIS 
Langfang Shengsen Abrasives
Co Ltd   2400-04 
OAV 
CGB Precision Products Pty Ltd   2518 
OMEGA 
Precision One Pty Ltd   1209 
OMS 
Pacifi c Urethanes Pty Ltd    3035 
OUPIIN 
Ampec Technologies Pty Ltd   1725 
OXFORD TECHNICAL SOLUTIONS 
Industrial Measurement Solutions Pty Ltd   1711 
OXYTURBO 
TeSuCo    1331 
OZBROACH 
Nitto Kohki Australia Pty Ltd    2136 
OZWELD SCHOOL OF WELDING 
TECHNOLOGY (OZWELD SWT) 
Welding Technology Institute of Australia   1340
BRAND Index 
nationalmanufacturingweek.com.au   33
P&H CASTERS 
QHDC Australia Pty Ltd   1609 
P&N 
Sutton Tools Pty Ltd   2734 
PACIFIC HOISTS 
Kockums Bulk Systems Pty Ltd    2231 
PANASONIC 
Panasonic Robot Welding Systems  1237
Visy Technology Systems   1815
PARKER MOTION CONTROL 
Motion Solutions Australia Pty Ltd   1329 
PEM 
Ampec Technologies Pty Ltd   1725 
PET 
Taizhou E-PLAS Packaging Co Ltd    2727-02 
PIAB 
Kockums Bulk Systems Pty Ltd    2231 
PLUMBOSS 
Edro Tube & Pipe Equipment   1143 
PMI 
Linear Technik Pty Ltd   1509 
PNEUMATICS 
A.P.I. Pneumatic    2623 
POLY-SI 
Superior Lubricants    2249 
POSIFLATE 
Kockums Bulk Systems Pty Ltd    2231 
POWERCORER 
Donaldson Australasia Pty Limited    2624 
PRATLEY ADHESIVES 
Staetite Fasteners    2438 
PROARC 
Smenco Pty Ltd   1137
PROCESS&CONTROL ENGINEERING (PACE) 
Manufacturers’ Monthly/Ferret.com.au   1644 
PROCON PUMPS 
Roehlen Industries Pty Ltd   3433 
PROFACE HMI AND INDUSTRIAL 
COMPUTERS 
Motion Solutions Australia Pty Ltd   1329 
PROFAX 
Independent Wholesale Welding Supply   1337 
PROJET 
3D Systems Asia Pacifi c    1537 
PROJET 660 PRO 3D PRINTER 
Pro Z 3D Solutions   1539 
PROPEN 
Gravotech Australia Pty Ltd    1408 
PROTO 
Stanley Black & Decker   1015 
PRYOR 
White International Pty Ltd    1309 
PTC CREO 
LEAP Australia   1639 
PTC MATHCAD 
LEAP Australia   1639 
PTC WINDCHILL 
LEAP Australia   1639 
QUANTUM NXT PUMP 
TECHNI Waterjet Pty Ltd    1825 
RAF ELECTRONIC HARDWARE 
Concept Fasteners    2516 
RAINX 
ITW AAMTech   1015 
REDIPAC 
John Thompson    2545 
REELCRAFT 
ReCoila Hose and Cord Reels   1015 
REPAR 
Modern Tools   2239 
REVERTE MINERALS 
S A Reverte Minerals   2923 
REX 
Edro Tube & Pipe Equipment   1143 
RINCO ULTRASONICS PLASTIC WELDERS 
Techspan Australia Pty Ltd   1842 
RITMO 
Plastral Pty Ltd   1444 
RK ROSE + KREIGER 
Linear Technik Pty Ltd   1509 
ROLAND 
Positive Camtec    2935 
ROMER 
Hi-Tech Metrology   2638
Industrial Measurement Solutions Pty Ltd   1711 
ROWMARK 
Trotec Laser   1928 
RTP 
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd   1824 
S.A.F.E. LTD 
Rapid Advanced Manufacturing Limited (R.A.M.) and 
S.A.F.E. Ltd    1424 
SAFE-T-STORE 
STOREMASTA Products Australia    1015 
SAMTECH 
Samhwa Corporation   3108 
SANYU 
Shanghai Sanyu Industry Co Ltd   2110-04 
SCHMALZ GMBH 
Millsom Materials Handling    1519 
SECOMAK 
Hurll Nu-Way Pty Ltd    2622
SEETRU 
Pressure and Safety Systems   1107 
SEI LASERS 
Laser & Sign Technology Pty Ltd   1431 
SEPTONE 
ITW AAMTech   1015 
SHERLOCK, INSPECT, SAPERA, HALCON 
SOFTWARE 
Adept Turnkey Pty Ltd    1115 
SHSY 
Shanghai Sanyu Industry Co Ltd   2110-04 
SICOMIN 
Lavender Composites    2618 
SIDCHROME 
Blackwoods   1015 & 1037 
Stanley Black & Decker   1015 
SIEGMUND 
Modern Tools   2239 
SIGMAMRP 
SigmaTEK Asia Pacifi c    1546 
SIGMANEST 
SigmaTEK Asia Pacifi c    1546 
SIGMATUBE 
SigmaTEK Asia Pacifi c    1546 
SILVERLINE 
Performance Waterjet    2031 
SIM3D 
Glenvern Associates Pty Ltd   1647 
SIMPAC 
John Thompson    2545 
SINO1 
Wuhan Dapco Auto Parts Co Ltd    2310-03 
SITEMASTA 
STOREMASTA Products Australia    1015 
SKYHOOK 
Modern Tools   2239 
SMOOTHARC 
BOC Limited    1025 
SOLID EDGE 
Cadimage PLM    1447 
SOLIDNEST 
SigmaTEK Asia Pacifi c    1546 
SOLIDWORKS 
Intercad Pty Ltd     1741 
SPATIAL ANALYZER 
Industrial Measurement Solutions Pty Ltd   1711 
SPECIALISED LIFTING EQUIPMENY 
Global Track Australia Pty Ltd   1707 
SPEEDLOCK 
Eximo speedLOCK   1015 
SPITFIRE 
Spitwater    2919 
BRAND Index
34  SYDNEY 13 – 16 MAY 2014
STANLEY FATMAX 
Stanley Black & Decker   1015 
STARRETT 
The LS Starrett Company of Australia   2549 
STARTASYS 
Intercad Pty Ltd     1741 
STERLING 
Sheffi eld Blades    1345 
STOODY 
CIGWELD Pty Ltd    1037 
SUMITOMO SHI DEMAG 
PBE-Roboplas Pty Ltd    2627 
SUMNER 
Independent Wholesale Welding Supply   1337 
SUREDAMP 
Mackay Consolidated Industries Pty Ltd    2639 
SUREFOOT 
Mackay Consolidated Industries Pty Ltd    2639 
SWF KRANTECHNIK CHAIN HOISTS 
Millsom Materials Handling    1519 
SWIFTA (SAFE WHEEL INSTALLATION) 
Leussink Engineering Pty Ltd   1819 
SWISSQPRINT 
Positive Camtec    2935 
T-DRILL 
Edro Tube & Pipe Equipment   1143 
TAI CHI MAGFORCE 
Amag Industries Pty Ltd   3125-04 
TAWI 
Kockums Bulk Systems Pty Ltd    2231 
TEAMCENTER 
Cadimage PLM    1447 
TECHJET WATERJET CUTTING MACHINE 
TECHNI Waterjet Pty Ltd    1825 
TECHNIFOR 
Gravotech Australia Pty Ltd    1408 
TECTALOY 
ITW AAMTech   1015 
TEKCEL 
Positive Camtec    2935 
TELEDYNE DALSA 
Adept Turnkey Pty Ltd    1115
TEROSON 
Henkel Australia (Loctite)    2025
TESTO 
TechRentals    1212 
TEU 
Anhui TEU Forklift Truck Co Ltd   1615-01 
TEXALAN 
Pacifi c Urethanes Pty Ltd    3035 
TGC 
Jiangsu Tongguang Optical Fiber
Cable Co Ltd   1730-02 
TGI 
Dalian TGI X-Trusion Technology Co Ltd 
2727-04 
THERMOWAY 
Precision One Pty Ltd   1209 
TIANJIAN 
Ningbo Haitian Huayuan Machinery
Co Ltd   3331 
TIERTIME 
3D Printing Systems   1530 
TIG 
Ensitech Pty Ltd   1347 & Demo H 
TIGMASTER 
Independent Wholesale Welding Supply   1337 
TOOL-TEMP AG 
PBE-Roboplas Pty Ltd    2627 
TOP-ENERGY 
HW Technologies    2519 
TORITR 
Donaldson Australasia Pty Limited    2624 
TRADEMAX TAPPING MACHINES 
Radius Benders Pty Ltd   2125 
TRIO MOBILE WRAPPER 
Trio Packaging Systems    1813 
TTMC 
Tengzhou Tri-Union Machinery    2100-01 
TV BRAND 
Hangzhou Vision Chain Transmission
Co Ltd   2210-03 
TWECO 
CIGWELD Pty Ltd    1037 
TY CHEMICAL 
Tianyi Chemicals (Qida Chemical)   3118
TYCO 
Precision One Pty Ltd   1209 
TYPE3 
Laser & Sign Technology Pty Ltd   1431 
ULTRA-WEBR 
Donaldson Australasia Pty Limited    2624 
ULTRAFILTERT 
Donaldson Australasia Pty Limited    2624 
UMATTA 
BOC Limited    1025 
UNIMEASURE 
ADM Instrument Engineering   1119 
UNIVERSAL LASER SYSTEMS 
Laser & Sign Technology Pty Ltd   1431 
UNIVERSAL LOUVRE 
Colt International    3018 
UNO-STAR 
Super Master Developing Co Ltd   1315-05 
UP 
3D Printing Systems   1530 
UREPAC 
Pacifi c Urethanes Pty Ltd    3035 
VAC-U-MAX 
Kockums Bulk Systems Pty Ltd    2231 
VACLIFT 
Blue Water Engineering Pty Ltd    2131 
VASTAIR | ALUMINIUM PIPING SYSTEM 
Allmach Pneumatic & Fluid Systems
Pty Ltd  2535 
VERLINDE 
Eurocrane Australia    1715 
VESDA 
Xtralis    2822 
VICOR 
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd   1824 
VICTOR THERMAL DYNAMICS 
CIGWELD Pty Ltd    1037 
VYTEK 
Trotec Laser   1928 
WELD GUARD 
BOC Limited    1025 
WELDFLEX 
Eximo speedLOCK   1015 
WELLHOPE 
China Wellhope Industrial Ltd   3125-01 
WEMO AUTOMATION 
PBE-Roboplas Pty Ltd    2627 
WILLIAM COX MINERALS LTD 
S A Reverte Minerals   2923 
WINKEL 
TEA Transmissions Australia Pty Ltd   1215 
WITTMANN 
Wittmann Battenfeld Australia    3023 
WON 
Linear Technik Pty Ltd   1509 
WORKHORSE 
Blackwoods   1015 & 1037 
BRAND Index 
13 – 16 MAY 2014
SYDNEY SHOWGROUND |SYDNEY OLYMPIC PARK
ADVANCING MANUFACTURING
NMW
NMW
3D Printing Systems  1530
3D Systems Asia Pacifi c  1537
A.P.I. Pneumatic  2623
A1 Testing & Tagging Pty Ltd  2719
ABO Electronics (Shenzhen) Co Ltd  1730-03
Adept Turnkey Pty Ltd  1115
ADM Instrument Engineering  1119
Allen Group of Companies  2722
Allmach Pneumatic & Fluid Systems Pty Ltd  2535
Amaero Engineering1429
Ampec Technologies Pty Ltd  1725
Anhui Ten Forklift Truck Co Ltd  1615-01
Apex Dynamics  1318
Asia Sourcing Corp  1415-07
Atical Collaborate International Co Ltd  1415-08
ATS Applied Tech Systems  1549
Autek Teconology Corp  1409-01
AVT Services  1205
BAC Systems Pty Limited  2123
Baosheng Science & Technology
Innovation Co Ltd  1731-01
Beijing Muzi Carbon International
Trade Co Ltd  2100-06
Better Springs  1211
Blackwoods  1015 & 1037
Blue Water Engineering Pty Ltd  2131
BOC Limited  1025
Bosbox  1736
Cadgroup Australia Pty Ltd  1541
Cadimage PLM  1447
Camfil Australia  1348
Carl Zeiss Pty Ltd  2345
Casey Cardinia Region  2449
Centralised Pumping Systems  1831
CGB Precision Products Pty Ltd  2518
Changzhou Amec Group Co Ltd  2200-01
Changzhou Mingsheng Warehouse
Equipment Co Ltd  1615-02
Chengdu Bangpu Alloy Materials Co Ltd  2100-02
CHITE Enterprises Co Ltd  1415-05
CIGWELD Pty Ltd  1037
Coast Electrical Industries Pty Ltd  1524
Colt International  3018
Composites Australia  2616
Concept Fasteners  2516
Control Plus  1625
CONWIRE Enterprise Co Ltd  1415-02
Corporate Traveller  2149
Cryonomic  1930
Dalian Dianfeng Rubber Belt Co Ltd  2410-02
Dalian Hawk King Forging-Casting
Industrial Co Ltd  2210-01
Dalian Liming Steel Structure Co Ltd  2410-04
Dalian Rubber & PlasticsMachinery
Co Ltd  2410-03
DAVI/FES  1818
DGS 3D  1528
Donaldson Australasia Pty Limited  2624
Dongying Giayoung Precision Metal Co Ltd  2243
Duromer Products Pty Ltd  2716
Dy-Mark  1015
Dynacast  1828
ECi M1  1544
Edro Tube & Pipe Equipment  1143
EHI Australia Pty Ltd  1015
Engineers Media  2541
Ensitech Pty Ltd  1347 & Demo H
Enterprise Connect  2225
Epicor Software  1445
ETD Pty Ltd  1627
Eurocrane Australia  1715
Eximo  1015
Ezi-Duct Pty Ltd –
Polex Environmental Engineering Pty Ltd  1719
Filblast Pty Ltd  2531
Fluke Australia Pty Ltd  1626
Future Lighting Australia Pty Ltd/
Umart Online  2631
GAP Plastomere Sarl  1201
GBOS  2323
Glenvern Associates Pty Ltd  1647
Global Track Australia Pty Ltd  1707
Gravotech Australia Pty Ltd  1408
Green Kent Inc  1415-03
Guizhou Aerospace Industry Co Ltd  2100-03
Gullco International Pty Ltd  1245
Halo Business Intelligence (BI)  1746
Hangzhou Vision Chain Transmission
Co Ltd  2210-03
HansaWorld Australia Pty Ltd  1542
HBM Test and Measurement  1304
Hebei Xinlong Casting Co Ltd  2310-04
Henkel Australia (Loctite)  2025
Hi-Tech Metrology  2638
Hiwin Technologies Corp  1315-01
Hodgkinson McInnes  2335
Hont Electrical Co Ltd  1731-02
HR3  2909
Hua Wei Industrial Co Ltd  1315-04
Hubei Fuyi Agricultural Machinery
Manufacturing Co Ltd  2400-03
Hubei Quanli Machinery Group  2210-04
Hurll Nu-Way Pty Ltd  2622
HW Technologies  2519
Illinois Enterprises Co  1315-08
Independent Wholesale Welding Supply  1337
Industrial Dynamics  1318
Industrial Measurement Solutions Pty Ltd  1711
Industry Update Media  1817
IndustrySearch.com.au  1508
Innovative Welding Pty Ltd  1146 & Demo A
Institute of Instrumentaton, Control &
Automation (IICA)  1007
Integrated Emergency &
Industrial Equipment  2738
Intercad Pty Ltd  1741
ITW AAMTech  1015
JDV Control Valves Co Ltd  1409-01
Jiangsu Tongguang Optical Fibre
Cable Co Ltd  1730-02
Jiangsu Weiteli Motors-Making Co Ltd  2300-02
Jiangsu Yangli Group Co Ltd  2300-01
John Thompson  2545
Josco  1015
Jubilee Spring Co  2539
Kap Components Australia Pty Ltd  2349
Kelvindale Products Pty Ltd  2339
Kinetic Cutting Systems  2849
KLINGSPOR Australia Pty Ltd  2224
Kobot Systems Pty Ltd  1515
Kockums Bulk Systems Pty Ltd  2231
KYOCERA Asia Pacifi c Pte Ltd  2448
Lan Shiuon PTFE Industry Co Ltd  1415-06
Langfang Shengsen Abrasives Co Ltd  2400-04
Exhibitor List by Alpha
COMPANY STAND COMPANY STAND COMPANY STAND
nationalmanufacturingweek.com.au   37
Exhibitor Listby Alpha| NMW
Laser & Sign Technology Pty Ltd  1431
Lavender Composites  2618
LEAP Australia  1639
Leussink Engineering Pty Ltd  1819
Lightwave Technology  1638
Linear Technik Pty Ltd  1509
Mackay Consolidated Industries Pty Ltd  2639
Manufacturers’ Monthly/Ferret.com.au  1644
Mayo Hardware  1015
Melbourne Centre for Nanofabrication  2423
Metal Science Technologies Pty Ltd  1344
MIGAS  1327
Millsom Materials Handling  1519
Modern Tools  2239
Moreton Bay Regional Council  2223
MOSCA Strapping Systems  1814
Motion Solutions Pty Ltd  1329
Multicam Systems Pty Ltd  2139
Mumme Tools Pty Ltd  1015
National Safety Council of Australia Ltd  2816
NetSuite  1633
New Zealand Engineering News  2343
Nextool Technology Co Ltd  2248
Ningbo Yin Zhou Dutian Import &
Export Co Ltd  1629
Nitto Kohki Australia Pty Ltd  2136
NOF Metal Coatings Asia Pacifi c Co Ltd  2612
Norbar Torque Tools  1015
Norton Hardware  2140
NSW Department of Trade and Investment  1925
Obara Australia Pty Ltd  1425
Oceanic Controls  1113
Ogis Engineering Pty Ltd  2645
OneCNC CAD CAM  1640
Pan Taiwan Enterprise Co Ltd  1415-04
Panasonic Robot Welding Systems  1237
Performance Waterjet  2031
PFERD Australia  1037
Plastral Pty Ltd  1444
Portable Analytical Solutions Pty Ltd  1310
Positive Camtec  2935
Powerbox Australia Pty Ltd/
M.Rutty & Co Pty Ltd  1824
Precision One Pty Ltd  1209
Pressure and Safety Systems  1107
Pro Z 3D Solutions  1539
Pronto Software Limited  1641
QHDC AUSTRALIA PTY LTD  1609
Radius Benders Pty Ltd  2125
Rapid Advanced Manufacturing Limited
(R.A.M.) and S.A.F.E. Ltd  1424
ReCoila Hose and Cord Reels  1015
Recruitaustralia.com  2723
Renishaw Oceania Pty Ltd  2439
Renz Australia Pty Ltd  2635
Revolution Materials  1924
Risen Machinery Co Pty Ltd  2523
Robert Bosch (Australia) Pty Ltd  1214
Rösler UK  2443
RVB Group Pty Ltd  2708
Sage Business Solutions Pty Ltd  1737
SAI Global  2818
Saint Gobain  1037
Shanghai Hishine Machinery Co Ltd  2110-01
Shanghai Ribo Industry Co Ltd  2110-03
Shanghai Sanyu Industry Co Ltd  2110-04
Shanghai Yasun Metal Products Co Ltd  1605-02
Shanxi Guangyu LED Lighting Co Ltd  1730-01
Sheffield Blades  1345
SigmaTEK Asia Pacifi c  1546
SLM Solutions GmbH  1424
Smenco Pty Ltd  1137
Spitwater  2919
Staetite Fasteners  2438
Stanley Black & Decker  1015
Star Business Solutions  1738
Storemasta Products Australia  1015
Stratasys  1437
Sun Industries  1724
Sunlec International Pty Ltd  1637
Supagas  1239
Super Master Developing Co Ltd  1315-05
Superior Lubricants  2249
Sutton Tools Pty Ltd  2734
Syspro Australia Pty Ltd  1543
TAITRA (Taiwan External Trade
Development Council  1315-06
TEA Transmissions Australia Pty Ltd  1215
Techflex Australia  1726
TECHNI Waterjet Pty Ltd  1825
Technical Forgings NZ Ltd  2608
TechRentals  1212
Techspan Australia Pty Ltd  1842
Tecweigh Pty Ltd  1206
Tenanic Industrial Co Ltd  1415-01
Tengzhou Tri-Union Machinery  2100-01
TeSuCo  1331
The Lincoln Electric
Company  1057, 1231 & Demo F
The LS Starrett Company of Australia  2549
Tianjin Master Storage Facilities Co Ltd  1605-01
Tianli Machine  2100-05
TIME Group Inc  1404
TIPTOP Industrial Development Co Ltd  1141-04
TMN Simulation  1547
Torema Engineering Pty Ltd  1525
Trend Marking Systems  1405
Treotham Automation Pty Ltd  1219
Trilogiq Australia Pty Ltd  1718
Trio Packaging Systems  1813
Trotec Laser  1928
TXM–Total Excellence in Manufacturing  2422
Tyrolit  1246 & Demo E
UBEECO™ Packaging Solutions  1708
VACUFLEX GmbH  1201
Vative  2538
Visy Technology Systems  1815
Wafangdian Xinyue Machinery Co Ltd  2200-03
Watermark  2434
Weifang Xiaoyu Commercial
Equipment Co Ltd  1605-03
Welding Technology Institute of Australia  1340
Westair SCR Australia Pty Ltd  2525
White Industries  1619
White International Pty Ltd  1309
Woodland Metal Spinning Pty Ltd  2644
Wuhan Dapco Auto Parts Co Ltd  2310-03
Wurth Australia Pty Ltd  1614
Wuxi Kenke Heavy Industry
Equipment Co Ltd  2200-04
Xtralis  2822
Yawata Electrode (Thailand) Co Ltd  1442
Yomura Technologies Inc  1409-02
Yueqing Fengda Trade Co Ltd  1527
Zhejiang Guidu Power Electronic Co Ltd  1830
COMPANY STAND COMPANY STAND COMPANY STAND
NMW | Exhibitor Profiles
38  SYDNEY 13 – 16 MAY 2014
3D Printing Systems
Stand 1530 
3/10 Ben Lomond Crescent
Pakuranga AUCKLAND 2010 New Zealand
Tel: 03 9099 0225 Fax: 03 9455 0600
www.3dprintingsystems.com
sales@3dprintingsystems.com
Contact: Bruce Jackson
3D Printing Systems leads the market in affordable desktop 3D printers. We are 
committed to offering personal and professional 3D printers that are more affordable 
and give better quality results, and that are comparable to high end 3D printers in 
the marketplace today. 3D Printing Systems has the largest installed base of desktop 
3D printers in Australia and New Zealand. We are the exclusive distributors for UP 
3D printers from Delta Marco Factory, Inspire Production 3D printers from Tier Time 
Technologies and Kevvox 3D printers from Kevvox.
3D Systems Asia Pacific 
Stand 1537 
5 Lynch Street 
HAWTHORN VIC 3122 
Tel: 03 9815 6000 Fax: 03 9819 4408
www.3dsystems.com.au 
sonia.stiliadis@3dsystems.com
Contacts: Peter Canfi eld, Travis Hardy
3D Systems is a leading provider of 3D content-to-print solutions including 3D printers, 
print materials and on-demand custom parts services for professionals and consumers 
alike. The company also provides CAD software and plugins, and affordable consumer 
create-and-make printers, apps and services. Its expertly integrated solutions replace 
and complement traditional methods and reduce the time and cost of designing new 
products by printing real parts directly from digital input. These solutions are used to 
rapidly design, create, communicate, prototype or produce real parts, empowering 
customers to create and make with confi dence.
A.P.I. Pneumatic 
Stand 2623
Via Cornaggia 107
Mozzate LOMBARDIA 22076 Italy
Tel: +39 0331 823511 Fax: +39 0331 823480
www.api-pneumatic.com
michela.caprioli@api-pneumatic.com
Contacts: Elio Annoni, Michael Rose, Les Pinkerton, 
Barry Tighe
API Srl (Apparecchiature Pneumatiche Industriali) is an Italian company specialised in 
the manufacturing of pneumatic components. The mission was to create a company 
with an international printing, our vision, to become a player with a more important 
role in this constantly changing market. Our catalogue today offers a wide range of 
products our own made, it divides in 5 chapters: actuators, valves, airline equipment, 
accessories, stainless steel components. We believe that very high quality components 
coupled with competitive prices, short delivery-time and fl exibility can grant us a 
position in this market.
A1 Testing & Tagging Pty Ltd 
Stand 2719
PO Box 3156
WHEELERS HILL VIC 3150
Tel: 1300 303 759 Fax: 03 9543 3978
www.A1testingandtagging.com.au/clevermode
info@a1testing.com.au
Contacts: Ric Fear, Daniel Fear
A1 Testing and Tagging is an electrical safety company that is promoting the new 
‘industry changing’ PAT testing machine, the Clevermode. Not only is it small and 
light, it integrates seamlessly together to test, record and print tags. Clevermode 
incorporates 2D barcoding, Wi-Fi and RCD Testing capabilities to make testing 
easier and faster, combining the abilities of many test equipment units into one 
product. To fi nd out more about this product and become a clever tester visit 
www.A1testingandtagging.com.au/clevermode or call us on 1300 303 759, we 
look forward to meeting you at the National Manufacturing Week stand 2719.
ABO Electronics (Shenzhen) Co Ltd
Stand 1730-03
Block B3 Haocheng Industrial Park 
Hexiu West Road, Heping, Fuyong, Baoan
SHENZHEN GD 518103 China
Tel: +86 755 2960 2620 Fax: +86 755 2960 8119
www.abo-sz.com.cn
yangming@mail.cmec.com
Contacts: Cherry Lu, Share Xia
ABO’s major products are mainly for control electronic, automotive electronic, medical 
& health care electronic, communication electronic, consumer & home appliance 
electronic, and LED lighting electronic.
Adept Turnkey Pty Ltd
Stand 1115 
Level 1/15 Drake Street
OSBORNE PARK WA 6017
Tel: 08 9242 5411 Fax: 08 9201 9991
www.adept.net.au
mfimeri@adeptturnkey.com.au
Contacts: Kevin Dowsey, Mark Goulding, Marc Fimeri
At NMW 2014 Adept Turnkey will showcase several demonstrations of the latest 
2D and 3D imaging technology. Smart cameras and vision systems for automated 
inspection. We will also showcase our high speed cameras for troubleshooting 
production machinery. Our vision engineers will answer questions and provide 
advice for your inspection applications. Adept turnkey strives to provide 
smart imaging products and services for better lives. We are oceania’s largest 
independent supplier of vision technology and services for automated inspection. 
We supply to industrial and scientifi c OEMs, system integrators, resellers and end-users. Our experienced vision engineers will ease the work and risk in integrating 
our technology by supplying the right products with the right advice and support.
ADM Instrument Engineering
Stand 1119
21 Garden Boulevard
DINGLEY VILLAGE VIC 3172
Tel: 03 9551 6922 Fax: 03 9551 6977
www.adminstrumentengineering.com.au
sales@admtech.com.au
Contacts: Adam Bellani, Glenn Bates, Ennio Fabris
With over 25 years of unrivalled expertise, ADM Instrument Engineering has grown to 
be Australia’s largest stockist of Mean Well power supplies, test and measurement 
equipment, sensors and instrumentation. We provide expert and personal customer 
service, we hold a wide product range for both common and unique applications and 
we pride ourselves in offering the right product, at the right price, on time.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   39
NMW | Exhibitor Profiles
40  SYDNEY 13 – 16 MAY 2014
Allen Group of Companies
Stand 2722 
5 Garema Circuit 
KINGSGROVE NSW 2208 
Tel: 02 9740 1600 Fax: 02 9740 9722
www.theallengroup.com.au
reception@calendars.net.au
Contacts: Brenden Tehrani, George Ekstrom,
John Meagher, Ross Freeman
Providing targeted advertising for your business, we are highly respected in the market 
place; we have been in business for 82 years; we specialise in marketing solutions 
for small to medium sized businesses; we are the largest manufacturer of marketing 
calendars in Australasia, with latest products designed to link the benefi ts of targeted 
advertising to the digital world; we maximise your brand exposure with our range 
of promotional products; we enhance your business utilising our digital technology 
and your photographs to create your personalised marketing calendar; and we are 
economical and tax deductible.
Allmach Pneumatic & Fluid Systems Pty Ltd
Stand 2535
24 Burns Road
HEATHCOTE NSW 2233
Tel: 1300 625 562 Fax: 1300 789 254
www.allmach.com.au
sales@allmach.com.au
Allmach Pneumatic & Fluid Systems Pty Ltd has been an established family business 
in Sydney for over 20 years actively engaged in design, marketing and distribution 
of advanced plastic, aluminium and stainless steel piping systems and solutions to 
a broad cross section of the industry. We stock a vast range of quality products at 
economical prices.
Amaero Engineering
Stand 1429
11 Normanby Road
Notting Hill VIC 3168
Tel: 03 9905 9794 Fax: 03 9905 1906
www.amaero.com.au
bdm@amaero.com.au
Contacts: Robert Hobbs, Ben Batagol
Amaero Engineering manufactures metallic components by laser-based additive 
manufacturing techniques – powder bed selective laser sintering (also known 
as 3D printing) and blown powder laser melting. Its powder bed facility includes 
two EOS INT M280 machines and a 1kW concept laser XLine 1000, which has 
the largest build volume in the world (up to 630mm x 400mm x 500mm high). Its 
blown powder facility is a Trumpf True Laser Cell 7040 that can accommodate 
parts up to 4000 x 1500 x 750mm. The 4 kW laser is manipulated by a fi ve-axis 
robot enabling the building and repair of highly complex components.
Ampec Technologies Pty Ltd
Stand 1725
Unit 1, 63–79 Parramatta Road 
SILVERWATER NSW 2128
Tel: 02 8741 5000 Fax: 02 9648 4500
www.ampec.com.au
info@ampec.com.au
Contacts: Raymond Li, Scott Gilholme, Philip Pang,
Kaz Kazmi, Suman Saha
Established in the 90s, Ampec Technologies is an established leading distributor of a 
wide range of passive electronic components including connectors, semiconductor 
ICs, resistors, capacitors, potentiometers, crystals, oscillators, fi lters, LEDs and LCDs, 
relays, sensors, switches, enclosures and fasteners, GPS modules, power cords, 
self-clinching metal fasteners, surge protection devices, transducers, cables and 
assemblies. Ampec Technologies is UL listed for manufacturing of cable harnesses, 
specialising in cable assemblies, which includes fl at cables, curly cord cables, moulded 
cable and cord assemblies, and custom-made cables and looms. Ampec Technologies 
is an ISO9001:2008 endorsed company.
Anhui TEU Forklift Truck Co Ltd
Stand 1615-01 
Zhongyuan Science Park, East Jinchao Road, 
Economic Technical Development Zone,
CHAOHU AH 238000 China
Tel: +86 62654001 Fax: +86 62654808
www.teuforklift.com
nicole@teuforklift.com
Contacts: Fang Yu, Nicole Lee, Frances Zhou
Anhui TEU Forklift Truck Co Ltd (called TEU for short) was founded in February 2007, 
and is located in Hefei City, Anhui Province. TEU is a professional manufacturer of 
counterbalanced forklifts, specialising in manufacturing, selling and after-sales service 
of 1.5-12 ton forklifts with annual production capacity 10,000 units. TEU forklifts have 
obtained ISO9001 quality systems certifi cation, special equipment manufacturing 
license, CE and SGS certifi cation. TEU forklifts have been exported to Europe, South 
America, Africa, South-east Asia, Oceania and the Middle East. In some countries TEU 
has established agents. TEU also provides OEM services for customers and seeks 
partnerships all over the world. We look forward to welcoming you to the TEU stand!
Apex Dynamics Australia
Stand 1318 
36 Taunton Drive
CHELTENHAM VIC 3192
Tel: 03 9585 2739 Fax: 03 9585 2731
www.apexdyma.com.au
sales@apexdyna.com.au
Contacts: Jon Pippard, Cameron Matela,
Tony Del Greco, Eugene Mayevsky
Launched in 2009, Apex Dynamics Australia has been supplying application specifi c, 
precision spur and helical planetary gearboxes for all brands of servo and stepper 
motors. Our unique online selection tool takes the guesswork out of choosing the best 
motor-gearbox combination. The Apex Dynamics manufacture-to-stock model enables 
our factory to assemble any gearbox type, size and ratio to suit your motor mounting 
– by the next business day. Backed by full two-year warranty Apex Dynamics Australia 
offers the perfect combination of quality, value and delivery. Visit the Apex Dynamics 
stand to try your strength on our popular ‘machine vs human’ arm-wrestling machine.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   41
Asia Sourcing Corp
Stand 1415-07 
5F, Lane 296, 45 Dadu Road Section 3, Beitou 
TAIPEI 11259 Taiwan 
Tel: +886 2 2898 5675 Fax: +886 2 2898 6128
www.asiasourcing.com.tw
op1@asiasourcing.com.tw
Contacts James Donaldson, Jeff Wang, Melody 
Wang
AST, your Asia Sourcing team, has a qualifi ed manufacturing supply chain certifi ed 
with ISO9001/TS16949 in various processes and expertise from concept, 
prototypes, tooling to production. The wide range of services we provide can reduce 
the number of suppliers you use, increasing your effi ciency and cutting costs to your 
bottom line. AST works for all your sourcing needs. Our services include expediting 
delivery; quality audits (PPAP/FQC/SPC); in-process inspection implement; locating 
qualifi ed vendor; production monitoring and product design. Our expertise include 
die casting; CNC turning; four-slide & stamped parts; Investment casting; forgings 
& cold headed parts; CNC machining; powdered metal and MIM (metal injection 
moulding).
Atical Collaborate International Co Ltd
Stand 1415-08 
12F, Lane 39, 42 Roosevelt Road, Section 6, 
Wenshan TAIPEI 116 Taiwan
Tel: +886 2 2931 0688 Fax: +886 2 2930 2613
www.drillux.com
acitwco@gmail.com
Contacts: Tracy Lin, Jason Davis, Vivian Lin
Atical Collaborate International Co Ltd (ACI) is the exclusive distributor of the Drillux 
range of patent drill bit in Australia and New Zealand region. Drillux patent drill with 
locking series drill bit with over thirty years of experience in concrete drill bit designing 
and manufacturing. The series of concrete drill bits, carbide tungsten of European 
high hardness specifi cations is adopted, incorporated with Japanese high toughness 
steel material, users can feel the sharpness of this product and a high level of 
toughness during practical use. It changed the traditional complex working way, 
effectively reduce working time and increase effi ciency.
ATS Applied Tech Systems
Stand 1549 
21 Chandler Road
BORONIA VIC 3155
Tel: 03 9761 2444 Fax: 03 9761 2744
www.ats-global.com
erwin.jansen@ats-global.com
Contact: Erwin Jansen
ATS is a global Independent Solution Provider for industrial and process automation, 
quality and IT, with over 25 years’ operation in the manufacturing systems arena 
and a wealth of experience undertaking continuous improvement initiatives and 
Manufacturing IT solution design, deployments and 24/7 support assignments. 
ATS provides products and services for all three levels of the automation pyramid 
- control, execution and information. ATS’s business activities are specifi cally 
designed to support the full lifecycle of automation and IT systems with consulting, 
implementation, training and 24/7 support. ATS is an innovative, strategic knowledge 
partner.
Autek Technology Corp
Stand 1409-01 
2F-11, 292 Hansi East Road
TAICHUNG 401 Taiwan
Tel: +886 4 2213 7259 Fax: +886 4 2213 8946
autek.taiwantrade.com.tw
autek@seed.net.tw
Contacts: Belinda Lo, Frank Chang, Allen Huang
Autek Technology Corp manufactures full project for rubber milling machine, hydraulic 
press machine, vertical injection machine, material handling system, extruder pellet 
machine, ultrasonic welding machine etc. and offers services to top companies all 
over the world in more than 85 countries, including USA, Mexico, Turkey, Middle 
Eastern countries, Asia and Australia.
BAC Systems Pty Limited 
Stand 2123
193–195 Power Street
GLENDENNING NSW 2761
Tel: 02 9832 2777 Fax: 02 9832 3899
www.bacsystems.com.au
robert.griffin@bacsystems.com.au
Contacts: Robert Griffi n, Brett Pender, Tony Tabone, 
Stefan Niederberger, Walter Bachmann
Quality industrial storage and workshop equipment manufactured by BAC 
Systems will be displayed at our stand 2123. Come and see details of BAC’s 
latest release, the ‘77 Series’ racking and shelving system, offering a hybrid 
storage solution for the smallest parts stores to the largest warehouses. BAC 
Systems will be showing its drawer storage system, adjudged by Standards 
Australia to be the benchmark for such systems. Likewise, BAC workbenches 
will be showcased this year, featuring integrated drawer storage. Our technical 
sales team is available to assist you with layout design for your site. Visit our 
stand, or our website to arrange your complimentary site survey.
Baosheng Science & Technology Innovation 
Co Ltd
Stand 1731-01
1 Suzhong Road, Baoying 
YANGZHOU JS 225800 China
Tel: +86 514 8824 8905 Fax: +86 514 8824 8888
www.baoshenggroup.com
13921915757@126.com
Contact: Nathan
We specialise in manufacturing bare wire, cables for electric equipment, power 
cable, instrument cable, medium-voltage cable, network cable, railway signal 
cable, mineral insulated cable, rubber insulated cable, irradiation crosslinking cable, 
branch cable, more than 220 kinds and 22000 specifi cations in cables and wires. 
Baosheng successively passed the ISO9001, ISO14001, ISO10012 and “UL”, “3 c”, 
“classifi cation society”, “coal mine safety Mark” and other domestic and international 
certifi cations.
Beijing Muzi Carbon International Trade Co Ltd
Stand 2100-06
West Mulberry Fields 
YANQING BJ China
Tel: +86 10 6913 3109 Fax: +86 10 6913 3126
www.bjmzcarbon.com
bjmzcarbon@163.com
Contacts: Chunping Li, Xiulian Chen
Muzi Carbon International Trade was founded in 1996. We focuse on the research, 
production and sale of the carbon-graphite material, fi ne fi nishing graphite product, 
carbon-based composite material. We have four international trade companies, 
four production companies, a research institute, a technology centre, a staff training 
centre and eighteen functional departments. The graphite products are sold to over 
60 countries and regions in Australia, Europe, America and South East Asia.
NMW14_P41.pdf Page 41 8/04/14, 12:27 PM
NMW | Exhibitor Profiles
42  SYDNEY 13 – 16 MAY 2014
Better Springs 
Stand 1211
PO Box 343
ST MARYS NSW 2760
Tel: 02 9623 5888 Fax: 02 9673 4804
www.bettersprings.com.au
sales@bettersprings.com.au
Contact: Ernest Grafl 0414 566 654
An Australian owned family business established for over 45 years, Better Springs 
manufactures all types of springs, wire shapes, pressings and leaf springs. Wire 
sizes range from 0.3mm to 16.0mm and for leaf/fl at springs from 0.2mm to 
32.0mm thick. We service defence, agricultural, aftermarket automotive, mining, 
general and heavy industries.
Blackwoods 
Stand 1015 & 1037 
1 Bellevue Circuit 
GREYSTANES NSW 2165 
Tel: 13 73 23
blackwoods.com.au
Blackwoods is Australia’s leading supplier of industrial and safety products. 
Taking a consultative approach to business partnering, the Blackwoods account 
management and industry and technical specialists combine to form one of the 
largest, most knowledgeable teams in Australia. With access to the widest range 
of maintenance, repair and operational parts from local and international sources, 
backed by our customer support services, Blackwoods has all your workplace 
needs.
Blue Water Engineering Pty Ltd 
Stand 2131
32 Jade Drive
NERANG QLD 4211
Tel: 07 5597 0511 Fax: 07 5597 0522
www.vaclift.net.au
john@vaclift.net.au
Contacts: Stephen Piacun 0414 591 762,
John Burns 0420 527 875
Vaclift is successfully being used to lift plate materials to save costs and increase 
safety and productivity in workshops and on site. Vaclift units are available as 
either dedicated crane or forklift vacuum lifters and are supplied as compressed 
air or fully self-contained battery powered systems. Examples of Vaclift uses are: 
to load cutting benches including waterjets and lasers; install glass or coolroom 
panels; and to lift large plates within factories or in the mining and LNG tank 
industries. Buying direct from the manufacturer means we can individually design, 
build and supply a Vaclift to your specifi cations. With a full engineering design 
team, Vaclift provides full and easy access to servicing, spare parts and ongoing 
support.
BOC Limited
Stand 1025
10 Julius Avenue
NORTH RYDE NSW 2113
Tel: 02 8874 4400 Fax: 02 9886 9322
www.boc.com.au
ros.willcox@boc.com
BOC offers an outstanding selection of leading gases, welding and safety products 
specifi c to the industrial market. Our network covers 90 BOC Gas & Gear retail outlets, 
40 production facilities and 1000 gas agents across the South Pacifi c. BOC, a member 
of the Linde Group, develops safe, sustainable and innovative solutions for customers 
in many industries. Our welding specialists offer a wealth of technical expertise in gas 
and welding and our safety specialists can help you with workplace safety issues. 
Contact BOC on 131 262 (Australia) or 0800 111 333 (New Zealand) or visit the 
website at www.boc.com.au or www.boc.co.nz
Bosbox
Stand 1736
11a Adams Street
O’CONNOR WA 6163
Tel: 08 9337 2811 Fax: 08 9337 9622
www.bosbox.com
sales@bosbox.com
Contacts: Shane Soltoggio, Grant Jarvis
The Bosbox range of portable power boards solves the problem of supplying safe 
temporary power wherever you may be. Bosbox is a heavy-duty, tough-as-guts-portable powerhouse. Apart from the great range of standard boards Bosbox has to 
offer, you can also have any board built to your specifi cations. Whether it’s three-phase, 
single-phase or even 32volt outlets, you can have a board to suit you fast! So, no 
matter whether you need a small power box or large distribution board, call us today 
and let us show you how we can make your work place safe!
Cadgroup Australia Pty Ltd 
Stand 1541 
Suite 3, Level 1, 202 St Johns Road 
GLEBE NSW 2037 
Tel: 02 9552 3466 Fax: 02 9552 2090
www.cadgroup.com.au 
rjayasundara@cadgroup.com.au
Contacts: Brett Moffi tt, Deepak Maini, Ian Cross,
Kajo Merkert, Raj Jayasundara
Cadgroup is an Autodesk Platinum value added reseller (VAR). The Platinum Tier 
status is the highest partner status available from Autodesk and recognises Autodesk 
partners who deliver the highest levels of value to their customers. Cadgroup is the fi rst 
Australian reseller to achieve this status. With over 25 years’ experience with Autodesk 
software, our core expertise is concentrated in digital prototyping, building information 
modelling, plant design and document management.
Cadimage PLM
Stand 1447 
11 Spring Street
BEECROFT NSW 2119
Tel: 02 9484 7837 Fax: 02 9475 4442
www.cadimageplm.com
vernon@cadimagegroup.com
Contacts: Vernon McKenzie, Paulo Gennari,
Peter Wong See, Andy Rigby, Andrew Ecker
Cadimage PLM is a supplier of 3D mechanical engineering software solutions for 
simulation and data management. We are a Siemens solution partner and sell, support 
and train in their Solid Edge, Femap with NX Nastran, and Teamcentre products. Our 
customers span the full spectrum from individual contractors or consultants through to 
the likes of Aurizon, Bluescope and BHP Billiton. Formed by the merger of EnDuraSim 
in Australia and Cadconsult PLM in New Zealand, Cadimage PLM brings decades of 
industrial CAD and FEA expertise to maximise the value of the technology investment 
for our clients.
TM
NMW14_P42.pdf Page 42 8/04/14, 12:27 PM
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   43
NMW | Exhibitor Profiles
44  SYDNEY 13 – 16 MAY 2014
Camfil Australia
Stand 1348
Unit 31 Slough Business Park
SILVERWATER NSW 2128
Tel: 02 9648 5800 Fax: 02 9350 9455
www.camfilapc.com
apcinfo@camfil.com.au
Contacts: David Higgins, Nick Grapsas, 
Christian Sanguineti, Bruce Landford
Camfi l Air Pollution Control (APC), being one of the top dust collector manufacturers 
worldwide, cleans up manufacturing processes. Just about every manufacturing 
process creates some type of dust or fume. Camfi l APC makes a dust collector to 
fi t just about any type of dust or fume. Camfi l is one of the most global air fi ltration 
specialists in the world with 23 production units and R&D centres in the Americas, 
Europe, South East Asia and the Asia-Pacifi c region. The Farr Gold Series® cartridge 
dust and fume collector combines enhanced performance with ease of service while 
cleaning the work environment of irritating dust and fumes.
Carl Zeiss Pty Ltd 
Stand 2345
Level 1, 25 Khartoum Road
NORTH RYDE NSW 2113
Tel: 02 9020 1333 Fax: 02 9020 1330
www.zeiss.com.au
thomas.wegmueller@zeiss.com
Contacts: Thomas Wegmueller, Sanjay Pillay
As a metrology innovation leader, Carl Zeiss IMT manufactures a complete range of 
coordinate measuring machines (CMMs) for every quality control need, as well as form, 
contour and surface measuring instruments, Industrial CT X-ray solutions for castings 
and NDT, and micro-measuring systems for extremely small parts such as medical 
components. We also offer complete system services, including retrofi ts, hardware 
service, software support, and metrology training.
Casey Cardinia Region
Stand 2449
Casey Cardinia Region
NARRE WARREN VIC 3805
Tel: 0429 598 939
www.caseycardinia.com.au
ccregion@casey.vic.gov.au
Contacts: Anna Moore, Tamara Ekanayake,
David Wilkinson, Andrew Pomeroy, Peter Fitchett
The Casey Cardinia Region is the place to grow your business. Situated to the 
south east of Melbourne, the region offers: a growing and vibrant region ready to do 
business; an accessible location and unmatched lifestyle; abundant and highly skilled 
workers; and competitive wages. Visit our Stand and fi nd out how you can grow your 
business in the Casey Cardina Region.
Centralised Pumping Systems
Stand 1831
10 Hobill Avenue
MANUKAU 2104 New Zealand
Tel: +64 9 263 8005 Fax: +64 9 263 8012
www.smarterclean.com
steve@cpsltd.co.nz
Contacts: Steve Colson, Robert Brown, Frank Colson
Centralised Pumping Systems Limited introduced to Australasia the Chemfree 
Smartwasher and its range of products. Our product range has grown and our 
expertise is second to none. Every product has undergone rigorous testing: it must be 
fi rst and foremost environmentally friendly and it must meet or exceed our expectations 
in its stated performance. This approach, our knowledge of the science, dedication 
to our products and the environment means clients trust us to produce the safe and 
‘green’ solution to specialist cleaning requirements.
CGB Precision Products Pty Ltd
Stand 2518
94 Voltri Street
MENTONE VIC 3194
Tel: 03 9584 5311 Fax: 03 9584 7784
www.cgb.com.au
blingard@cgb.com.au
Contact: Michael Lingard
CGB is a supplier of specialty bearings and engineered products. With the world’s 
best products we have been successfully serving applications in aviation, defence, 
manufacturing and medical instrumentation for over 40 years. CGB has expanded its 
product range to incorporate three very exciting and revolutionary developments in 
the fi eld of bearings, Bowmet® wrapped bushings, CMC-Grooved roller bearings and 
OAV air bearings. These products offer signifi cant advantages over current bearings 
giving increased load-speeds and effi ciency, longer service life and high accuracy. From 
prototype to production, CGB works with customers to develop a solution to their 
engineering problems and applications.
Changzhou Amec Group Co Ltd
Stand 2200-01
62 Xianggang Road 
CHANGZHOU China
Tel: +86 519 8397 8022 Fax: +86 519 8397 8999
www.amecco.com
grace@amecco.com
Contact: Grace Gu
We import and export mechanical products such as diesel engine, gasoline engine, 
tractor, generator set, and building material machinery and equipment, chain, gear etc..
Changzhou Mingsheng Warehouse Equipment 
Co Ltd
Stand 1615-02 
23 Hengluo Road, Henglin Town 
CHANGZHOU JS 213101 China
Tel: +86 519 88786788 Fax: +86 519 88780111
company@msjscn.com
Contacts: Yang Mingming, Hua Junjie
We are a manufacturer in China, providing light rack, medium rack, heavy rack, 
cantilever rack, mezzanine fl oor, push back rack, drive-in rack and other warehouse 
equipment. Our factory has over 10 years’ working experience. We have high-power 
laser cutting machine, CNC bending machine, CNC punching machine, Panasonic 
robot welder and two automatic powder coating lines. Our factory has nearly 100 
workers. We believe in mechanisation, which can offer lower prices with higher quality.
Chengdu Bangpu Alloy Materials Co Ltd
Stand 2100-02 
16-1 Baicao Road,
Western Zone of Hi-Tech District, Hi-Tech Zone
CHENGDU SC 611731 China
Tel: +86 286 6337597 Fax: +86 286 6337580
www.bpcarbide.com
cdbp@bpcarbide.com
Contacts: Saffron Chen, Shaoping Jiang
Chengdu Bangpu Alloy Materials Co Ltd is the number one woodworking tools and 
number two carbide metal cutting tools manufacturer in China. Our products have 
been exported to Europe, America, South East Asia, Middle East and other regions. 
Our main products are: milling and turning inserts for processing aluminium, cast iron, 
stainless steel, a variety of steel and other metals, and carbide inserts for grooving, 
drilling and tool holders, brazing inserts; indexable woodworking knives, woodworking 
dowel drill bits, hinge boring bits, high precision planers; carbide shims, diamond and 
CBN substrate, mining ball gears, domed inserts for oil industry, blanks, rods, wire 
drawing dies, punching dies and other carbide products. Customised products and 
OEM service is welcomed too!
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   45
CHITE Enterprises Co Ltd
Stand 1415-05 
19F, 615 Ta Tung Road, Setion 2
TAINAN 701 Taiwan
Tel: +886 6 289 2423 Fax: +886 6 289 2290
www.chite.com.tw
chite@chite.com.tw
Contact: Monica Chang
CHITE was founded in 1994, we strongly believe that the only way to enhance our 
competitiveness is to control the manufacturing by ourselves. Therefore, we started 
to set up and invested in factories from 2000. Today, we have 7 factories whose main 
products are A2/A4 stainless steel hex nuts/hex bolts/nylon insert lock nuts, carbon 
steel chipboard screws/drywall screws, self drilling screw/hex nuts, threaded rods/
stamping parts, cotter pins etc. in Taiwan and China.
CIGWELD Pty Ltd
Stand 1037 
71 Gower Street
PRESTON VIC 3072
Tel: 1300 654 674 Fax: 03 9474 7391
www.cigweld.com.au
enquiries@cigweld.com.au 
Contacts: Glenn Wright, Bryan Eveleigh, Alan Noujaim
CIGWELD is the major brand of cutting and welding products marketed by Victor 
Technologies in the Asia Pacifi c. The CIGWELD brand has become one of the most 
respected brands in Cutting & Welding. In the past year we have been working on 
some exciting improvements to the brand and presentation of the entire product 
range. Along with the CIGWELD brand we actively promote four other core brands. 
Those are Victor Thermal Dynamics – manual and automated plasma cutting systems, 
accessories and consumables; Tweco – manual and semi-automatic welding torches, 
consumables and accessories; Stoody – tubular special purpose and hard surfacing 
wires.
Coast Electrical Industries Pty Ltd 
Stand 1524
Corner of Kenny and West Streets
WOLLONGONG NSW 2520
Tel: 02 4228 6733 Fax: 02 4228 9706
www.coastelectrical.com.au
ron@coastelectrical.com.au
Forty years in business, Coast Electrical Industries Pty Ltd commenced in 
Wollongong, New South Wales, in 1973, manufacturing transformers under the 
brand Illawarra Transformers, and other electrical equipment. A purpose-built 
factory was constructed on the corner of Kenny and West Streets, Wollongong, 
in 1978. This factory was doubled in size in 1987 and doubled again in 2002 
to cater for increasing demands, as transformers became the major part of our 
business. We have always believed that electrical engineers want better, not 
cheaper, products. Our transformers are manufactured to that belief. Australian 
made is the best!
Colt International
Stand 3018
81 Market Street
SMITHFIELD NSW 2164
Tel: 02 9828 2513 Fax: 02 9609 6969
www.coltinfo.com.au
joe.napoli@au.coltgroup.com
Contacts: Joe Napoli, Stephen van De Gevel,
Darren Civil, Ranjodh Singh, Guido Broda
Colt designs and supplies innovative and energy-effi cient comfort and safety systems 
for people in industrial and commercial buildings. Colt systems include natural 
ventilation, industrial evaporative cooling and smoke control products. Internal heat 
generating processes and the typical Australian climate turn many industrial production 
and warehouse facilities into uncomfortable, unproductive and unsafe hot boxes. In 
some applications, the high temperatures affect the process and therefore quality of 
the end product. Colt will undertake a detailed survey of the facility and recommend a 
solution involving a number of energy effi cient products and systems. Typical factory or 
building applications include: manufacturing, food production; warehouse maintenance 
workshops; power stations; and processing plants.
Composites Australia
Stand 2616 
17 Rooney Street
RICHMOND VIC 3121
Tel: 03 9429 9884 Fax: 03 9421 5516
www.compositesaustralia.com.au
admin@compositesaustralia.com.au
Contacts: Anna Civiti, Kerryn Caulfi eld, Ray Seddon
The primary objective of Composites Australia is to increase the awareness and 
general usage of composites in Australia. We do this by managing a strong and 
proactive industry association. The association promotes and connects the industry. 
Composites Australia is a member based organisation that promotes and facilitates: 
employment; education and training; growth to the skills base; improved technology 
utilisation; product quality; forums for discussion by members on subjects of common 
interest and concern; liaising with other relevant industry groups and institutes, both 
within Australia and overseas; health and safety practices, and a high standard of 
ethics within the composites industry in Australia.
Concept Fasteners
Stand 2516
9 Flight Drive
TULLAMARINE VIC 3043
Tel: 03 9338 6633 Fax: 03 9338 6433
www.conceptfasteners.com.au
sales@conceptfasteners.com.au
Concept Fasteners imports, stocks, sells and distributes fasteners and industrial 
hardware used in the manufacture of industrial and automotive applications including: 
specialist fasteners, self clinching fasteners, rivet nuts, tools, rivets, root nuts, cage 
nuts, brass inserts, panel fasteners, sems screws, latches, locks, hinges and struts. 
Special automotive fastener fi nishes are available to Ford, Toyota, Nissan, GM and 
others. NSW offi ce: 02 9774 4416.
Control Plus
Stand 1625
Unit 4, 41 Green Street
BANKSMEADOW NSW 2019
Tel: 02 9666 9722 Fax: 02 9666 9493
www.controlplus.com.au
hjarrett@controlplus.com.au
Control Plus Australia is displaying Guard+, their machine safety fencing system that 
is east to erect and install using specially designed components and conforms to 
AS4024.1. Control Plus Australia is also displaying the new range of Fatek PLCs and 
Beijer iX and Exter HMI panels. Control Plus supplies automation and safety products 
and solutions. Brands include Exter, iX and H-Series HMI, Fatek and Yokogawa PLCs, 
DRA power supplies and sensors. We also supply and install a full range of safety 
components and systems including Guard+, light curtains, safety PLC, dump valves 
and risk assessment.
NMW | Exhibitor Profiles
46  SYDNEY 13 – 16 MAY 2014
CONWIRE Enterprise Co Ltd
Stand 1415-02 
Lane 835, 7 ZhongHua Road, Section 1, Zhongli 
TAOYUAN 320 Taiwan
Tel: +886 3 455 9295 Fax: +886 3 455 8111
www.nian-yeong.com/tw
jadis@conwire.com.tw
Contact: Jadis Chou
CONWIRE is a professional cable assembly and connector manufacturer with over 20 
years of experience. We are specialised in wire harness with original brands connector 
assembly, OEM/ODM cable assembly, variety of connector production.
Corporate Traveller 
Stand 2149
Level 13, 33 Berry Street 
NORTH SYDNEY NSW 2060
Tel: 0405 554 070 
www.corporatetraveller.com.au
lisa.parkinson@fl ightcentre.com.au
Contacts: Brendan Seiler, Brandon Hayashi,
Brett Thomson, Daniel Mcloughlin, Fred Barnes
With more than 20 years of proven industry experience, Corporate Traveller guarantees 
to save you time and money on business travel through our dedicated personal 
service, expert knowledge and the global backing of the Flight Centre Travel Group. We 
have long term partnerships with a number of clients in the manufacturing sector and 
whether you’re a regular road warrior or just an occasional fl yer, our innovative travel 
solutions will help you spend less time making travel bookings and more time focusing 
on your core business.
Cryonomic
Stand 1930
PO Box 478
PENRITH NSW 2751
Tel: 02 4722 9133 Fax: 02 4722 9633
www.cryonomic.com.au
quickenkleen@bigpond.com
Contacts: Richard Denmead, Tim Fraatz
We supply environmentally friendly cleaning equipment including clean-in-place 
systems and high-pressure dry ice blasting: time and money saving, no-damage 
cleaning systems.
Dalian Dianfeng Rubber Belt Co Ltd
Stand 2410-02
319 Huabei Road, Ganjingzi
DALIAN LN 116021 China
Tel: +86 411 86593980 Fax: +86 411 86536990
www.dlrubber.com
yangming@mail.cmec.com
Contacts: Liu Yang, Wang Liang, Yin Danhong
Dianfeng Belting is a manufacturer that designs, develops and fabricates heavy duty 
conveyor belts. Leading products include steel cord reinforced conveyor belt, multiply 
textile reinforced conveyor belt and solid woven conveyor belt which are extensively 
used at mining industry, cement plant, steel making plant, and bulk handling terminal 
industry.
Dalian Hawk King Forging-Casting Industrial 
Co Ltd
Stand 2210-01
Zhaotun, Wafangdian 
DALIAN LN 116300 China
Tel: +86 411 39515820 Fax: +86 411 39515919
www.forge-cast.cn
jimmyzhai2011@hotmail.com
Contacts: Qu Yongzhe, Zhai Yanqing
Dalian Hawk King Forging-Casting Industrial Co Ltd was incorporated on May 25, 
2000. We provide forging, heat treatment processing, and professional machinery 
manufacturing services. We can forge up to 10 million pieces or 100 thousand tons.
Dalian Liming Steel Structure Co Ltd
Stand 2410-04
Qian Mu Cheng Yi, Ying Cheng Zi, Ganjingzi
DALIAN LN 116000 China
Tel: +86 151 4047 3130 Fax: +86 10 6345 6563
www.dl-liming.cn
lmsteelsales@gmail.com
Contact: Zhang Yue
Dalian Liming Steel Structure Co Ltd Is a professional enterprise integrating design, 
fabrication and installation of building steel structure. It has the Grade-II steel 
structure construction qualifi cation awarded by the Ministry of Construction, and it 
can undertake the design, fabrication and installation of various light and heavy steel 
structures, grid structures, and colour plate enclosing structures.
Dalian Rubber & Plastics Machinery Co Ltd
Stand 2410-03
18 Yinghui Road, Ganjingzi
DALIAN LN 116000 China
Tel: +86 411 39070222 Fax: +86 411 86641645
www.dlrpm.com
yanghong@dlrpm.com
Contacts: Ren Fengnian, Yang Hong
We manufacture large/heavy rubber and plastics machinery equipment with the range 
of nearly 200 sorts and 400 specifi cations, mainly including rubber & plastics mixer 
line, rubber & plastics calendaring line, one step mixing technology and line, various 
series two roll mill, single/twin-screw plastics extruder line, and radial tire inner liner 
production line.
DAVI/FES
Stand 1818 
PO Box 504
MOOLOOLABA QLD 4557
Tel: 07 5478 3387 
www.fes.net.au
mike@fes.net.au
Contacts: Mike Dye, Lyn Dye, Alfredo Mancini,
Omar Ottaviani
Fabrication Equipment Supplies (FES) is a specialist supplier of a range of machines 
including plate and section rolling machines, press brakes, plasma and laser profi le 
cutters as well as guillotines, punch and shears and bandsaws. Sourcing quality 
machinery and productivity systems through established agencies and overseas 
trading partners to an Australia-wide customer base has seen many customers 
increase profi ts due to increased productivity and effi ciency. Fabrication Equipment 
Supplies (FES) has been the exclusive Australian agent for high quality DAVI (www.
davi.com) products since 2002 and is the leader in servicing the Australian plate and 
section rolling industry.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   47
NMW | Exhibitor Profiles
48  SYDNEY 13 – 16 MAY 2014
DGS 3D
Stand 1528
Unit C6, 23–25 Windsor Road 
NORTHMEAD NSW 2152
Tel: 02 9683 6065 
dgs3d.com.au
joanne@dgs3d.com.au
Contacts: Connor Moore, Geoff Hancock,
Mark Hancock, Mick Eberhard
DGS 3D is the sole Australian dealer for Mcor Technologies, which manufactures the 
world’s most affordable, full-colour and eco-friendly 3D printers. They are the only 3D 
printers to use ordinary business A4 paper as the build material, a choice that renders 
high defi nition, durable, stable and tactile models. With low cost paper 3D printing, 
innovation is now more affordable to everyone. At DGS 3D our team is committed to 
showing designers and manufacturers how you can save money and time by choosing 
paper 3D printing, the most economical, and most eco-friendly method of rapid 
prototyping. Send us a test fi le you’d like printed in paper, so you can see and feel this 
incredible technology!
Donaldson Australasia Pty Limited 
Stand 2624
1 Lucca Road
WYONG NSW 2259
Tel: 02 4350 2000 Fax: 02 4351 2036
www.donaldsonfilters.com.au
dustcollector@donaldson.com
Contacts: Donna Curl - General Manager IFS,
Michael Crawley - Territory Manager IAF,
Kevin Tabb - Sales & Service Manager CAPS,
Daniel Wager - Territory Manager IAF,
Paul Whybourn - Aftermarket Sales Specialist
Donaldson is the name more manufacturers trust for industrial dust collection, 
compressed air and process fi ltration and replacement parts. For decades, 
Donaldson has offered manufacturers the most advanced and reliable fi ltration 
solutions. Donaldson’s superior customer service, technical support, unrivalled 
research and development and unmatched global reach combine to help 
increase our customers’ manufacturing effi ciencies and provide a cleaner 
environment for employees. Donaldson’s products can help safeguard that 
bottom line with the most innovative collectors and fi lters, expertly engineered by 
its unparalleled team of research and development engineers to meet or exceed 
OEM quality and performance standards.
Dongying Giayoung Precision Metal Co Ltd
Stand 2243
1049 Tianshan Road,
Shengli Economic Development Zone
DONGYING SD 257067 China
Tel: +86 546 8180516 Fax: +86 546 8180818
www.cast-china.com
liyuan@cast-china.com
Dongying Giayoung Precision Metal Co Ltd is located in the fertile delta of Yellow River 
and is only 270km from the Qingdao seaport. Fixed capital is 9.6 million USD, the 
manufacturing site is 80,000m2 with over 30,000m2 of offi ce and production space. 
Giayoung has three precision casting production lines and an independent machine 
shop. Our annual production capability is 120 million pieces. The North America sales 
and service centre, Giayoung Metal Inc, was established in 2012. Giayoung is now 
ranked among the top four investment casting manufacturers in China, while products 
have won the recognition of many of the world’s Fortune 500 companies.
Duromer Products Pty Ltd
Stand 2716 
Lot 109 Progress Circuit
PRESTONS NSW 2170
Tel: 02 9426 7300 Fax: 02 9426 7399
www.duromer.com
aldo.mostacci@duromer.com
Contacts: Aldo Mostacci, Jeremy Paton, Rex Pickard, 
Brendan Jones, Gary Jennings
Duromer Products is an Australian manufacturer and supplier of thermoplastic 
polymers and compounds to the plastics industry. Our expertise is in the supply of 
locally manufactured customised thermoplastic solutions. The Duromer difference is 
our ability to understand our customers’ challenges in today’s high-tech market place. 
Through this understanding and our knowledge of plastics we are able to recommend 
either off-the-shelf products or, where required, formulate a customised compound 
solution.
Dy-Mark 
Stand 1015 
Suite 9 & 10, 19 Lang Parade
MILTON QLD 4064
Tel: 1300 396 275 Fax: 1300 360 440
www.dymark.com.au
sales@dymark.com.au 
Contacts: Peter Trennery, Matthew Kavalaris
Celebrating 50 years of innovation, Dy-Mark has been a leading force in the 
manufacture and distribution of top-quality specialised marking paints and coatings. 
Our rigorous product development and testing programmes have grown our product 
range to include; marking out aerosol/bulk paints, inks and dyes, industrial markers, 
stencilling products, protective/decorative coatings, cleaners/solvents and industrial 
packaging products. Our products are universally respected for their quality, reliability, 
visibility and creativity. Elements of our product packaging put us at the forefront of 
innovation whilst adding a practical element to do the job at hand. Our in-house R&D 
team develops ingredients that ensure our products work under extreme conditions.
Dynacast 
Stand 1828 
6 Second Chin Bee Road 
JURONG 618773 Singapore
Tel: +65 6559 1751 Fax: +65 6265 1652
www.dynacast.com 
shchiang@dynacast.com.sg
Contacts: Chiang Shu Hui, Gary Mok
Dynacast is a global manufacturer of small engineered die cast components from zinc, 
aluminium, magnesium and metal injection moulding (MIM) utilising our proprietary 
multi-slide die-casting technology. We serve customers in automotive, consumer 
electronics, healthcare, computers and peripherals, telecommunications and 
many other industries. Our extensive engineering expertise and use of specialised 
manufacturing technologies enable us to design and manufacture customised, small, 
high-precision components with complex geometries in a cost-effective manner.
ECi M1
Stand 1544 
Suite 27, 799 Springvale Road
MULGRAVE VIC 3170
Tel: 03 8544 1300 Fax: 03 9560 0382
www.manufacturing.ecisolutions.com
pjennings@ecisolutions.com
M1 is an ERP software solution for manufacturers. Our customers include job shops, 
custom and mixed-mode manufacturers, and make-to-order manufacturers. M1 
automates and integrates every business process from quoting, invoicing and point 
of sale. It is fl exible and easy to customise, so it handles the most unique business 
processes with ease.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   49
Edro
Stand 1143
7 Bearing Road
SEVEN HILLS NSW 2147
Tel: 1800 668 483 Fax: 02 9620 7877
www.edro.com.au
info@edro.com.au
Contacts: Trevor Thrush, Reuben Brown
Welcome to Edro distributors. Edro has established a reputation in the tube and pipe 
industry as being a provider of high quality tools and equipment to trades people and 
contractors working in many different industries. Solutions are provided for: cutting, 
bevelling, branching/collaring and automatic welding of tubes and pipes. There are 
also solutions for bevelling and edge fi nishing of plate steel and equipment for the 
fabrication, maintenance and repair of heat exchangers and pressure vessels. Edro 
services Australia, New Zealand and the Asian Pacifi c region. For more information 
please visit our website and online shop or call us.
EHI Australia
Stand 1015
Unit 2/11 Hume Road
Smithfi eld NSW 2164
Tel: 02 9756 3666 Fax: 02 9756 3622
www.ehi.com.au
chris.f@ehi.com.au
EHI Australia is part of over 25 separate companies operating within the Colson 
group, all specialising in the manufacture and/or sales of castors and wheels. These 
companies represent many of the World’s leading brand names including Albion, 
Bassick, British Castors, Colson, Flexello and Revvo. At EHI we offer a comprehensive 
range of castors from industrial and institutional to Stainless Steel and High Temp. Our 
comprehensive range of wheels and castors is also complimented with our materials 
handling equipment including conveyors, trolleys and drum handling equipment.
Engineers Media
Stand 2541
Level 4, 2 Ernest Place
CROWS NEST NSW 2065
Tel: 02 9438 1533 Fax: 02 943 85934
www.engineersmedia.com.au
jromanis@engineersmedia.com.au
Engineers Media is the publishing company of Engineers Australia (the Institution 
of Engineers Australia). The company produces the fl agship Engineers Australia 
magazine, delivered to just under 56,000 professional engineers every month. The 
magazine is printed in two editions, the General and Civil editions. The General edition 
reaches 31,994 (CAB audit) mechanical, chemical and electrical engineers while the 
Civil edition reaches 23,648 civil and structural engineers every month. The company 
has developed an enviable reputation as a quality and well respected publisher. The 
cornerstone of our success is built on our editorial independence and quality content.
Ensitech Pty Ltd 
Stand 1347 & Demo H
Unit 1/144 Old Bathurst Road
EMU PLAINS NSW 2750
Tel: 02 4735 7700 Fax: 02 4735 7744
www.tigbrush.com
susan@ensitech.com.au
Contacts: Chris Gaida, Susan Howe, Peter Wale
The Ensitech Surface Finishing System® provides safe, fl exible and fast cleaning 
and passivation of welds and metal surfaces. The system combines the TIG 
Brush® weld cleaning system and a comprehensive range of fl uids for pre-weld 
preparation, weld cleaning, neutralising, fi nishing and surface marking. Ensitech 
chemicals are low-toxicity and include biodegradable and pH neutral fl uids. 
Patented power management, Dynamic Power Transfer®, delivers maximum 
duty cycle, superior performance and long-running reliability. Ensitech’s 
innovations have improved workplace and environmental safety as well as 
effi ciency in quality and safety conscious industries in Australia and overseas.
Enterprise Connect 
Stand 2225
Level 4, 341 George Street
SYDNEY NSW 2000
Tel: 02 9397 1672 Fax: 02 9397 1685
www.enterpriseconnect.gov.au
joel.norris@innovation.gov.au
Contacts: John Murray, Joel Norris, Sally Palmer
Success in business has a lot to do with making powerful connections and 
getting the right advice. Enterprise Connect is an Australian Government initiative 
backed by industry that offers comprehensive advice and support to eligible 
Australian small and medium businesses to help them transform and reach 
their full potential. Our network of government, industry, education and research 
partners allows us to provide you with comprehensive advice and support 
to improve your business performance. Experienced, independent business 
advisors work with you to review your business and give you unbiased advice at 
no charge. For more information visit our website or call 131 791.
Epicor Software
Stand 1445 
Level 34, 101 Miller Street
NORTH SYDNEY NSW 2060
Tel: 02 9927 6200 Fax: 02 9927 6298
www.epicor.com
mlevett@epicor.com
Contact: Simon Purser
Epicor provides enterprise resource planning (ERP) software solutions to maximise 
effi ciencies within the four walls of each manufacturing plant, while providing 
innovative technology to inspire effi ciency across the globally extended enterprise. 
The comprehensive Epicor solution portfolio enables manufacturers to plan, schedule, 
execute, and monitor the entire business—from raw materials to fi nal product, to pick, 
pack, and ship. With a full range of functionality, Epicor provides manufacturers with 
fl exibility and agility, and inspires a competitive edge. With nearly 40 years of combined 
experience serving midmarket organisations and divisions of Global 1000 companies, 
Epicor has more than 20,000 customers in over 150 countries.
ETD Pty Ltd 
Stand 1627 
2 Pat Devlin Close 
CHIPPING NORTON NSW 2170 
Tel: 02 9602 7040 Fax: 02 9602 7041
same@etd.com.au
Australia’s largest power cord/extension lead supplier to various industries.
Eurocrane Australia 
Stand 1715 
6 Homebush Avenue 
MERNDA VIC 3754 
Tel: 1300 781 980
www.eurocrane.net.au 
l.haber@eurocrane.net.au
Contacts: Jean Wiart, Lee Haber
We supply materials handling equipment; electric chain hoists; jib cranes; wire rope 
hoists; belt hoists; workstation and light crane systems; crane kits and components; 
and EX rated lifting solutions. 
Eximo speedLOCK 
Stand 1015
186 Newton Road 
WETHERILL PARK NSW 2164 
Tel: 02 9757 1233 Fax: 02 9757 1446
www.eximo.com.au
sales@eximo.com.au
Contacts: Casey Degning, Karen Browne
Now in its 30th year, Eximo speedLOCK operates from the major industrial distribution 
hub of Wetherill Park in western Sydney, supplying the full range of modular steel 
ducting and polymer-based fl exible ducting to a large network of wholesalers, retailers 
and technical partners, as well as directly to a range of industries.
NMW | Exhibitor Profiles
50  SYDNEY 13 – 16 MAY 2014
Ezi-Duct Pty Ltd – Polex Environmental 
Engineering Pty Ltd 
Stand 1719
343 - 345 Chisholm Road
AUBURN NSW 2144
Tel: 02 9645 2333 Fax: 02 9645 5666
www.eziduct.com.au
eziduct@bigpond.com.au
Contacts: Wayne Dockrill, Grant Stevens, Dave Waghorn
Ezi-Duct is an Australian manufacturer and the market leader in the fi elds of dust 
and fume extraction, pneumatic conveying and mechanical ventilation equipment. 
Ezi-Duct’s products include Ezi-Duct modular ducting, dust and fume collectors, 
Ezi-Arm fume arms, industrial fans, spray booths, fume extractors, rotary valves, 
roof ventilators and much more. Ezi-Duct also carries a range of fl exible ducting 
and is the Australian agent of the German company Norres. Polex Environmental 
Engineering is a specialist designer and manufacturer of industrial air fi ltration 
equipment. Polex’s engineers are committed to improving their products to meet 
the needs of a diverse range of industries, with the environment at the forefront of 
our thinking.
Filblast Pty Ltd
Stand 2531
Ferrier Road
NARANGBA QLD 4504
Tel: 1300 929 349 Fax: 1300 307 230
www.filblast.com.au
thomas.ioramo@filblast.com.au
Contact: Chris Bevan
Filblast offers a wide range of products including dust collectors, abrasive blasting 
booths and equipment, fi lter cartridges and accessories. Filblast is dedicated to 
maintaining strong business structures to ensure longevity within the manufacturing, 
industrial processing and mining industries. Our aim is to create diversity within the 
business, allowing opportunities for sustained growth in a competitive industry. We at 
Filblast believe that by continuing to offer quality Australian products along with those 
of our international partners, our attention to detail and high level of customer service, 
the company will continue forward maintaining a reputation for quality and integrity.
Fluke Australia Pty Ltd
Stand 1626
Unit 26, 7 Anella Avenue
CASTLE HILL NSW 2145
Tel: 02 8850 3333 Fax: 02 8850 3300
www.fluke.com.au
mirna.maroun@fluke.com
Contacts: Terry Capon, Nigel Billinge, Henk Van Velze, 
Casey Hourihan, Mirna Maroun
From industrial electronic installation, maintenance and service, to precision 
measurement and quality control, Fluke tools help keep business and industry around 
the globe up and running. People who stake their reputation on their tools use Fluke 
test tools as the only brand they know and trust! Since its founding in 1948, Fluke 
has helped defi ne and grow a unique technology market, providing testing and 
troubleshooting capabilities that have grown to mission critical status in manufacturing 
and service industries. The Fluke brand has a reputation for portability, ruggedness, 
safety, ease of use and rigid standards of quality.
Future Lighting Australia Pty Ltd/Umart Online 
Stand 2631 
2 Kilroe Street 
MILTON QLD 4604 
Tel: 07 3170 3238 Fax: 07 3876 1080
www.futurelightingau.com 
futurelighting@hotmail.com
Contacts: Ben Lam - Sales Manager NSW,
Indar Sharan - National BDM,
Peter Zhong - Director
Future Lighting is the Australian distributor of a range of LED luminaires. Its main 
focus is to develop, organise, manufacture and sell high-price, high-performance 
LED luminaires such as street lights, fl oodlights, spotlights, down lights, light tubes, 
and light bulbs. We have four sales offi ces in Queensland, one in Sydney and one in 
Melbourne, plus the ability to ship out orders nationally from the Milton Head Offi ce. All 
products have passed the TÜV, CE, C-tick, SAA, FCC, RCM compliance tests, ERAC 
Safety certifi cations and have the Queensland Government Certifi cate of Approval. See 
you at Stand 2631 at NMW in the Clean Tech Zone.
GAP Plastomere Sarl
Stand 1201
Chemin de Fortuneau – ZI Sud
MONTELIMAR 26200 France
Tel: +33 4 75 01 75 75 Fax: +33 4 75 52 02 27
www.gap-plastomere.com
info@gap-plastomere.com
Contact: Stamatis Chiotis
GAP Plastomere Sarl is part of the Schauenburg Hose Technology Group, which 
has a long history in the manufacturing of high-performance spiral and ducting 
hoses from almost all thermoplastics. Production facilities are in Montelimar, France. 
Products include fl exible PVC suction and delivery hoses, ducting hoses from PVC or 
polyurethane as well as from other advanced materials like Neoprene, silicone, Kevlar 
and Tefl on. These products have applications in a number of industries like: agriculture; 
food and wine processing; woodworking; swimming pool and spa; mobile heating; 
air conditioning and ventilation; dust extractions; material-handling in chemical and 
plastics industry; and the marine industry.
GBOS
Stand 2323
65 Lowan Avenue
LOWER TEMPLE STOWE VIC 3107
Tel: 1300 880 613
www.gbos.com.au
brian.le_mon@gbos.com.au
Offshore manufacturing is a necessity in many companies in order to remain viable 
in a global marketplace. A serious problem that many companies encounter is the 
persistent quality fade and rampant nonconformance that often results from the move 
to an offshore vendor. GBOS specialises in getting these issues under control and 
making offshore manufacture work for you instead of working to diminish your brand 
and company reputation. GBOS is the expert in reducing offshoring risk. Using our 
extensive expertise in the transitioning process to offshore manufacturers, we work on 
your behalf to ensure your transition to outsourced manufacturing is smooth, painless 
and capable of producing quality and repeatable results.
Glenvern Associates Pty Ltd
Stand 1647 
PO Box 250
KANGAROO GROUND VIC 3097
Tel: 0409 197 853
www.glenvernasc.com.au
alec@glenvernasc.com.au
Contacts: Alec Poulton, Mike Poulton
Glenvern Associates Pty Ltd is the principal provider in the Australasian region, 
marketing the Emulate3D, Sim3D and Demo3D materials-handling solutions as well 
as the GlenPro Optimisation technologies and providing advanced training and project 
consulting services. Join the fast expanding group of global users who are using our 
technologies to gain a competitive edge.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   51
NMW | Exhibitor Profiles
52  SYDNEY 13 – 16 MAY 2014
Global Track Australia Pty Ltd
Stand 1707
68 Station Street
NORLANE VIC 3214
Tel: 03 5275 3252 Fax: 03 5275 6474
www.globaltrack.com.au
brucem@globaltrack.com.au
Contacts: Bruce McKay, Jeannie Ford, Woz Fox
The central focus at Global Track is to improve the function of existing overhead 
manual cranes to a higher standard by developing a revolutionary pivotal system. 
Created using straightforward engineering principles, the ergonomic design features a 
pivotal bearing and levered swinging U-hanger producing a crane with unprecedented 
fl uid motion. The unique pivotal system has the load applied between the pivot points 
allowing a lever reaction, which reduces the operator effort. Unlike static track cranes, 
which require signifi cant operator effort and are prone to jamming, Global Track will 
work with ease while increasing effi ciency, improving production and decreasing 
workplace injuries.
Gravotech Australia Pty Ltd
Stand 1408 
Unit 3, 9–11 South Street
RYDALMERE NSW 2116
Tel: 02 9684 2400 Fax: 02 9684 2500
www.gravotech.com.au
sales@gravotech.com.au
Contacts: Simon Scott, Warren Bennison,
Phil Vernon, Tony Brownbill
The Gravotech Group has the best engraving, marking and modular signage solutions 
on offer. Our engraving machine range, as represented by the Gravograph and 
Technifor brands, includes pantographs, small engravers to large industrial rotary 
machines, CO2 and fi bre lasers. We offer a full range of materials, dedicated engraving 
software, plus the most experienced support team here in Australia.
Green Kent Inc
Stand 1415-03 
30-1 Chung King North Road, Section 3
TAIPEI 103 Taiwan
Tel: +886 2 2592 9546 Fax: +886 2 2592 6003
www.drairtools.com
simeon@greenkentinc.com
Contacts: Simeon Chou, Joyce Chou
Green Kent Inc is an OEM and ODM manufacturer and exporter specialising in 
pneumatic tools in Taiwan since 1978. We have a long history in its fi eld and have 
a very good knowledge with all pneumatic products. Our main business is selling 
and manufacturing of pneumatic tools for car repair, assembly lines and all related 
industries. We manufacture the tools such as air impact wrenches, air double action 
sanders, air hammers, air screwdrivers and etc.. We have created our own brand 
“DR PNEUMATIC TOOLS” which utilize with all the valuable knowhow techniques and 
precious knowledge.
Guizhou Aerospace Industry Co Ltd
Stand 2100-03 
7 Honghe Road, Xiaohe District
GUIYANG GZ 550009 China
Tel: +86 851 8696451 Fax: +86 851 8697061
www.061jd.casic.cn
gzht061@sina.com
Guizhou Aerospace Industry Co Ltd subsidiary enterprises cover a variety of industries 
ranging, from machinery, electronics, electric appliances chemical industry, metallurgy 
and more. We enjoy outstanding advantages, strong cooperation and various 
capabilities in the research and production of power supplies, special micro-motors, 
relays, electrical connectors, special cabins, and more. For the past few decades, 
we have contributed much to undertaking various research and production tasks for 
several important national programs and key model products.
Gullco International Pty Ltd 
Stand 1245
Unit 3, 42 Trade Street
BRISBANE QLD 4178
Tel: 07 3348 5515 Fax: 07 3348 5510
www.gullco.com
warrick.rapp@gullco.com
We specialise in welding and cutting automation.
Halo Business Intelligence (BI) 
Stand 1746 
Level 1, 110 George Street 
PARRAMATTA NSW 2150 
Tel: +64 2 800 50135 Fax: +64 2 987 85522 
www.halobi.com 
info-apac@halobi.com
Contact: Asj Smith, Brian Gray, Steve Holohan
Halo BI is a business intelligence platform that transforms raw data into information 
that businesses can see, share and use to make better decisions. More importantly, 
we also provide tools that people can use to understand the information, share 
and discuss what they’re seeing, and make smarter, faster decisions that benefi t 
manufacturing organisations from top to bottom. With Halo BI, manufacturers are able 
to leverage all of the data available throughout the manufacturing process in order to 
deliver a holistic view, allowing them to make decisions based on data that accurately 
refl ects the state of the entire manufacturing process.
Hangzhou Vision Chain Transmission Co Ltd
Stand 2210-03
D-8B International Garden, 160 Tianmushan Road 
HANGZHOU ZJ 313000 China
Tel: +86 180 7287 3188 Fax: +86 571 8821 3782 
www.tvchain.cn
amy@tvchain.cn
Contacts: Amy Shen, Bany Liu, Tina Ji
Hangzhou Vision Chain Transmission Co Ltd is a professional manufacturing enterprise 
of industrial chain and sprocket products, and was registered in 2004. We have 380 
staff, and are member of China’s Chain Drive Standardization Technology Committee 
and Chain Association member unit. We produce roller chain, transmission chain, 
conveyor chain, agricultural machinery chain, stainless steel chain, OEM chain, non-standard chain, OEM sprocket, stainless steel chain wheel, etc. We have ISO9001-2008 international certifi cation, implement the production standard, ISO, GB, ANSI, 
DIN, JIS. We have advanced and effi cient production equipment, skilled technical 
personnel, complete testing equipment, and a strict quality management system. 
“Quality fi rst, customer fi rst” is our goal!
HansaWorld Australia Pty Ltd
Stand 1542 
Suite 409, Level 4, 15 Lime Street
SYDNEY NSW 2000
Tel: 02 8011 1895 Fax: 02 8011 1896
www.hansaworld.com
kirk@hansaworld.com
Contacts: Kaido Schmidt - Country Manager,
Ben Kirk - Consultant,
Parik Dhody - Consultant
HansaWorld is the fi rst major software house to provide a full suite of enterprise 
resource planning, fi nancials and CRM to the manufacturing industry on tablets 
and smartphones. HansaWorld shows continued technological leadership in the 
international business software industry. The group employs around 300 staff in a 
strong network of subsidiaries and distribution partners covering over 100 countries on 
all continents, allowing HansaWorld to offer international implementations with a single 
point of contact across many countries. The solutions are available in more languages 
than anyone else’s, run on all major platforms and support mobility via laptops, the 
latest tablets and smartphones.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   53
NMW | Exhibitor Profiles
54  SYDNEY 13 – 16 MAY 2014
HBM Test and Measurement
Stand 1304
Suite 2, 6-10 Talavera Road
NORTH RYDE NSW 2113
Tel: 02 9889 8070 Fax: 03 9770 8728
www.hbm.com
tinh.ngo@hbm.com
HBM offers high accuracy data acquisition systems, custom sensors and transducers, 
digital and analogue load cells, strain gauges, amplifi ers, indicators, controls and 
software for high-speed dynamic weighing, torque measurements, fi lling, packaging 
and scale applications with manufacturing facilities in US, Germany and China. Visit 
www.hbm.com/weighing.
Hebei Xinlong Casting Co Ltd
Stand 2310-04
Guangming Street, Ren 
XINTAI HB 055150 China
Tel: +86 319 7517858 Fax: +86 319 7516920
www.hbxlzz.com
Lyzlj2002@hotmail.com
Contacts: Frank Zhu, Mary Li, George Guo
Hebei Xinlong Casting Co Ltd was established in July, 2003, and is located in Hebei 
province (Ren County) economic development zone. Hebei Xinlong is a member of the 
China Foundry Association. Our main processes are enamelling cast iron cookware, 
enamelling cast iron grids and auto parts (brake drums). Covering an area of 70,000m
2
, 
Xinlong has two auto moulding lines, three enamelling lines and eight moulding 
machines, which are fully equipped. The company has an advanced laboratory which 
can test and research metallographic, strength, tension and chemical analysis. Xinlong 
warmly welcomes all business customers visiting our company.
Henkel Australia (Loctite)
Stand 2025
135-141 Canterbury Road
KILSYTH VIC 3137
Tel: 1300 885 556 Fax: 03 8761 6988
www.loctite.com.au
loctite.enquiries@henkel.com
Contacts: Sivashankar Ayadurai, Stefano Giacometti, 
Michael Hajj, Shane Carney, Andrew Arena
Loctite® is the world’s number one brand of engineering adhesives and sealants. Our 
solutions reduce cost and increase reliability. The product range includes adhesive 
and sealant solutions for industrial production, industrial maintenance and for car care 
and maintenance. Supplementary Loctite® product lines include lubricants, mould 
release agents, cleaners and other specialty products useful for making bonded 
joints. A complete line of standard equipment including both automated and manual 
dispensing and curing systems is available; custom equipment can be designed, built 
and integrates to meet specifi c processing needs.
Hi-Tech Metrology
Stand 2638
2 Carl Court
HALLAM VIC 3803
Tel: 03 9702 3911 Fax: 03 9702 3933
www.hitechmetrology.com.au
craig.leckie@hitechmetrology.com.au
Contacts: Criag Leckie, Lew Evans, Michael O’Reilly, 
Paul Mayberry
Hi-Tech Metrology provides world-class metrology and reverse engineering solutions 
designed to deliver enhanced outcomes in terms of productivity, quality and innovation. 
Our extensive range of metrology and scanning equipment, combined with a complete 
array of support services, enables us to tailor solutions incorporating hardware, 
software and engineering for virtually any measurement or reverse engineering task. 
Many world-leading brands such as Hexagon Metrology, Brown & Sharpe, DEA, 
Romer, MicroVu, Leica, Hommel, and more, are all represented and supported by 
our experienced team. Contact us now and see how we can help you with today’s 
demanding industrial and manufacturing applications.
Hiwin Technologies Corp
Stand 1315-01 
7 Jingke Road, Nantun 
TAICHUNG 40852 Taiwan
Tel: +886 4 2359 4510 Fax: +886 4 2359 4420
www.hiwin.com.tw
business@hiwin.tw
Contact: William Lin
Beside the high precision ballscrews, linar guideway, industrial robot, bearings, AC 
servo motor & drive, six-axial robot, Hiwin is moving to the total solution service.
Hodgkinson McInnes
Stand 2335 
Level 21, 201 Elizabeth Street 
SYDNEY NSW 1225
Tel: 02 8267 7300 Fax: 02 9264 5154
www.hmcip.com.au
email@hmcip.com.au
Contact: Lachlan Mullane
Hodgkinson McInnes helps Australian manufacturing and technology fi rms to create 
and maximise wealth from R&D and reduce their risks by enhancing their commercial 
strategies with our practical, innovative and legal business solutions. Through cost-effective processes and commercially pragmatic advice, we have assisted over 3,000 
companies with commercial innovation strategies, business asset creation, commercial 
intelligence tools, creation of strong value perceptions and risk management strategies.
Hont Electrical Co Ltd
Stand 1731-02 
Hont Mansion, Xiamen Industrial Zone, Liushi
WENZHOU ZJ 325604 China
Tel: +86 577 62796732 Fax: +86 577 62796731
www.hont.cc 
zjhont@hotmail.com
Contacts: Xufei Wang, Tracy Pei, Philip Lin
Certifi cation: ISO9001(1998) TUV(2001) CE(2002) UL(2003) SGS(2005) ROHS. 
REACH(2009) UL&TUV for power tools switch(2010) CCC for the wall switch(2011).
R&D: research and development for the plastic and punching independently.
Tenet: best service, best quality, centenary HONT, continuance business.
HR3
Stand 2909
Level 1, 1030 Dandenong Road
CARNEGIE VIC 3163
Tel: 03 8563 9200 Fax: 03 8563 9299
www.hr3.com.au
frank.rizzeri@hr3.com.au
Contacts: Frank Rizzeri, Suresh Bopitiya,
Michael Benyon, Gary Bentall
Since 1984, HR3 has implemented its employee management software and solutions 
in over 5,000 Australian organisations ranging in size from 5 to 5,000 employees. 
HR3 is Australian owned and develops all of its solutions in Australia specifi cally for 
Australia’s ever changing employment legislation, HR and OH&S requirements. The 
HR3 product suite includes solutions for OH&S, HR, payroll and time & attendance 
plus web-based EMSS, HR and OH&S. HR3 solutions helps streamline processes and 
eliminate errors with in-built workfl ows and electronic alerts. HR3 uses technology to 
build powerful solutions for your workplace. HR3 solutions are functionality rich, cost 
effective and available Australia-wide.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   55
NMW | Exhibitor Profiles
56  SYDNEY 13 – 16 MAY 2014
Hua Wei Industrial Co Ltd
Stand 1315-04 
1 Twenty-Sixth Road, Taichung Industrial Park
TAICHUNG 407 Taiwan
Tel: +886 4 2359 7777 Fax: +886 4 2359 6705
www.hwlok.com
service@hwlok.com
Contact: Joseph W.H Chang
Hua Wei Industrial Co Ltd was founded in 1976 in Taiwan and is one of the largest 
manufacturers of cable ties and wiring accessories. Our facilities are equipped with 
over 100 injection moulding machines, and full product line of cable ties, stainless 
steel ties, wiring terminals, wiring ducts, fl exible conduits, adaptors, etc. The number 
of our employees worldwide is around 1,500. Our products are exported to 75 
countries worldwide and supplied to various industries such as electrical, electronics, 
telecommunications, automotive, ship-building, railroad, energy, HAVC, military, 
construction and retail market.
Hubei Fuyi Agricultural Machinery 
Manufacturing Co Ltd
Stand 2400-03
Room 1305, 178 Guang’anmenwai Street 
BEIJING BJ 100055 China
Tel: +86 10 6343 7322 Fax: +86 10 6345 6563
www.yigongjx.com
yangming@mail.cmec.com
Contacts: Hong Jiadong, Shi Beidou
Fuyi company is a rapidly growing agricultural machinery and construction machinery 
manufacturing enterprise in the Northwest of Hubei Province. “Fuyi” products have 
won the confi dence and support of customers both at home and abroad. In addition to 
central and western China, the products have been distributed to more than 10 countries 
and areas in Southeast Asia, Middle East, Africa, Europe, and South America.
Hubei Quanli Machinery Group
Stand 2210-04
Zengdu Economic Development Zone
SUIZHOU HB 441300 China
Tel: +86 722 333 Fax: +86 4 2359 4420
www.qljxjt.com
lxq5709@vip.163.com
Quanli’s main products are hubs, brake drums, brake discs, brake spiders, brake 
shoes, axle box housing, reducer housing for middle and rear axle, balance shells, 
wheel redactor, bearing bases and all kinds of assembly.
Hurll Nu-Way Pty Ltd
Stand 2622
PO Box 339
GLEN WAVERLEY VIC 3150
Tel: 03 8561 1600 Fax: 03 9560 8992
www.hnw.com.au
olga.kustova@hnw.com.au
Contact: Ben Rowlinson
Hurll Nu-Way has been importing top-quality products to Australian manufacturers for over 
a hundred years. Today our vast product range includes blowers, compressors and air 
knives; pumps, mixers and meters; heaters, air handlers, split systems and cooling fans; 
gas, oil and process burners as well as boilers. Call us if you need to: transfer and meter 
LPG with no product losses; reduce energy waste in the furnace; save energy in a water 
treatment plant; build for comfort and environment. We help you make smart choices and 
provide you with the best cooling, heating and process equipment solutions.
HW Technologies
Stand 2519 
Unit 2, 33 Daking Street
NORTH PARRAMATTA NSW 2151
Tel: 02 9683 4008 Fax: 02 9683 1001
www.hwtechnologies.com.au
info@hwtechnologies.com.au
Contacts: Hugo Waibel, Sachin Naidu, Melina Waibel
We supply affordable, multifunctional PCB and general milling machines; toolkit for analysis 
and optimisation of industrial energy systems; acoustic cameras for the visualisation, 
precise location and analysis of sound; complete solutions for an ergonomic workplace, 
including modular workstations, software, testing and training equipment for assembly, 
laboratory and education environments.
Illinois Enterprises Co
Stand 1315-08 
8F, Lane 385, 3 Ao Fong Road, Ching Shui 
TAICHUNG 407 Taiwan
Tel: +886 4 2626 4488 Fax: +886 4 2626 4466
david001@illinois-tw.com
Contact: David Wang
Hand truck, platform truck, aluminium folding trucks.
Independent Wholesale Welding Supply
Stand 1337
2/170 Power Street
GLENDENNING NSW 2761
Tel: 02 8834 2400 Fax: 02 8834 2498
www.iwws.net
terry@iwws.net
Contacts: Terry Burke, Scott Leacey, Sebastian 
Lengyel, Nat Manfre, Nathan Bradley
IWWS is the leading wholesaler of Profax, Tigmaster, Lenco, Sumner and Weld-Aid 
products. These brands have been synonymous with welding for over 40 years and are 
sold through welding distributors worldwide. Other leading brands added to the range are 
Arcforce, JASIC, Speedway, Flange Wizard, Koweld, Weldwide and mepBLITz. IWWS 
specialises in MIG and TIG processes, providing brands the welding trade demands.
Industrial Dynamics
Stand 1318 
36 Taunton Drive
CHELTENHAM VIC 31921
Tel: 03 9008 5687 Fax: 03 9585 2731
www.industrialdynamics.com.au
sales@industrialdynamics.com.au
Contacts: Eugene Mayevsky, Jon Pippard,
Cameron Matela, Tony Del Greco
Industrial Dynamics is a new local company specialising in mechanical and pneumatic motion 
control components and systems. We offer a wide range motion components for linear 
and rotary applications up to 40Tforce and 4800Nm torque including: ball screws; linear 
guideways and bearings; robotic stages; splined shafts; rack and pinion systems; electric 
cylinders; screw jack assemblies; pneumatic equipment; planetary gearboxes; effi cient 
lubrication delivery systems and much more. Our products easily integrate with most motion 
control, servomotor and stepper brands, helping to reduce design and assembly effort. 
Focusing on rapid delivery and expert advice, we can assist you with new projects, as well as 
alternatives, drop-in replacements and spares for your existing components.
Industrial Measurement Solutions Pty Ltd
Stand 1711
15–17 Beaumont Road
MT KURING-GAI NSW 2080
Tel: 02 9457 7794 Fax: 02 9457 7796
www.measure.com.au
bruce@measure.com.au
Contact: Bruce Cameron
Industrial Measurement Solutions is a specialist in laser, GPS and optical technology systems 
for measurement and dimensional control. We offer expertise in installation, training and 
servicing of measurement systems, data acquisition systems and associated software. Our 
customers include engineering and construction, surveying and mapping, manufacturers, 
service providers, mining and government organisations, automotive, railway, aerospace, 
shipbuilding, civil and general engineering industries. Our specialist products include Leica 
Geosystems laser trackers, Romer measuring arms and scanners, Oxford Technical 
Solutions GPS INU systems, Kistler/Corrsys-Datron Sensors, and SpatialAnalyzer software. 
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   57
Industry Update Media
Stand 1817
Level 2, 621 Pacific Highway 
ST LEONARDS NSW 2065
Tel: 02 9439 1288 Fax: 02 9439 3233
www.industryupdate.com.au
scott@industryupdate.com.au
Contacts: Scott Filby, Tim Michael, Sean Fletcher
With an audited national circulation of 19,000 and a readership of 76,000, Industry 
Update is Australia’s leading manufacturing magazine. Our bi-monthly magazine and 
website provide the latest manufacturing news and industry features, with a strong 
focus on workplace safety. The magazine is considered a must-read for the people 
who make buying decisions. Industry Update offers NMW/Ausplas visitors free 
magazine subscriptions and magazine giveaways
IndustrySearch.com.au
Stand 1508 
CBD
SYDNEY NSW 2000
Tel: 02 9925 4000 Fax: 02 9925 4099
www.industrysearch.com.au
marketplace@industracom.com
IndustrySearch is the hub of industrial sourcing and discovery in Australia. Discover 
50,000 listed products and services, fi nd 30,000 industry articles and events, follow 
your favourite suppliers and connect with a community of over 500,000 buyers: go to 
industrysearch.com.au.
Innovative Welding Pty Ltd
Stand 1146 & Demo A
PO Box 1046
REVESBY NSW 2212
Tel: 02 9584 4500 Fax: 02 9584 4580
innovativewelding.com.au
apoole@controlsystems.com.au
Contacts: Adam Poole, Ian Burrell, Neil Le Quesne, 
Laurie Jarvis
Innovative Welding Pty Ltd is proud to be the Australian distributor for K-TIG, a 
game-changing welding process set to revolutionise the welding industry. K-TIG is 
a high-speed, single-pass, full-penetration welding technology that eliminates the 
need for wire or even edge preparation. With welding speeds up to 100 times faster, 
welcome to K-TIG.
Institute of Instrumentaton, Control & 
Automation (IICA)
Stand 1007
PO Box 856
PAKENHAM VIC 3810
Tel: 03 9036 0166 Fax: 03 9772 0133
www.iica.org.au
nsw@iica.org.au
Contacts: Julie Meynell, Fred Azzi, Mark Brereton,
Luis Rudenas
Since 1943 the IICA has been leading the way in the instrumentation, control and 
automation industry. The IICA is an open arena for members to build their network 
and knowledge, to enhance their professional career and make some lifelong 
friendships. Real friendships create an environment in which views are shared and 
opinions debated. These friendships can be relied upon in times of diffi cultly. We 
rely on each other for assistance and advice. The IICA provides a forum to set the 
benchmark, provide networking and education to our members.
Integrated Emergency & Industrial Equipment
Stand 2738
11 Raglan Street
BACCHUS MARSH VIC 3340
Tel: 0419 923 586 Fax: 03 5367 3213
www.integratedequipment.com.au
elliott.bruce@bigpond.com
Contacts: Bruce Elliott, Helen Elliott
Integrated Emergency & Industrial Equipment Solutions Pty Ltd, as the Australian and 
New Zealand agent for the Chambrelan product range, offers customers the benefi t 
of our local presence, extensive knowledge and experience. Chambrelan’s heavy-duty sliding systems are renowned for their range (over 30 types), load capacity (from 
5kg to over 1000kg) and long trouble-free life. They are available in partial, full and 
over extensions telescopic slides, liner rails, slide and tilt drawer systems, slam locks 
and handles. It’s why they are widely used across the emergency services, vehicle, 
mining, defence, offshore, rolling stock and manufacturing sectors. Together with 
Chambrelan, Integrated is here to offer you the best solutions!
Intercad Pty Ltd
Stand 1741 
Units 1 & 4, Building 6
49 Frenchs Forest Road East
FRENCHS FOREST NSW 2086
Tel: 1300 223 226 
www.intercad.com.au
vernon.tang@intercad.com.au
Contacts: Konstantin Beyner, Julian Spencer,
Filip Kuttner, Francois Marchall, Jason Princehorn
Intercad is one of Australia and New Zealand’s premium suppliers of SolidWorks solid 
modelling solutions among other offerings. Building on Intercad’s 26 years of industry 
experience, the company has increased support capabilities and developed more 
targeted training programs, provided by its highly experienced team of engineers. 
These expert services, when combined with Intercad’s technology partner, IC3D, 
provide a portfolio of products and services including tailored consulting services. 
Value added software in IC3D Steel, translationXpert, high end workstations from 
IC3D Workstations, BOXX Computing and 3D printing technologies from Stratasys, 
complete its customer-focused solutions.
ITW AAMTech 
Stand 1015 
44 Aquarium Avenue
HEMMANT QLD 4174
Tel: 07 3390 5044 Fax: 07 3390 5041
www.aamtech.com.au 
roneill@septone.com.au
Contacts: George Katsadas, Gary Walsh, Rob O’Neill
ITW AAMTech, a division of ITW Australia, is an Australian based manufacturing 
company which produces and markets quality solutions for the Australian and NZ 
markets. Our brands include, Septone® Chemtech®, Wynn’s®, Tectaloy® and 
RainX, allowing ITW AAMTech to offer a comprehensive range, bringing together 
more than 70 years of experience manufacturing premium products in Australia. The 
range caters for markets including transport, automotive, industrial, cleaning and 
hospitality, mining and marine industries. With its extensive research, manufacturing 
experience and development capabilities, ITW AAMTech continues to improve and 
create innovative products that meet or exceed customers’ requirements.
JDV Control Valves Co Ltd
Stand 1409-01 
6-1 Qing Nian Road, Yang Mei
TAOYUAN 326 Taiwan
Tel: +886 3 496 5066 Fax: +886 3 496 3526
www.jdv.com.tw 
sales@jdv.com.tw
Contact: Stella Chin
JDV is a manufacturer of metal seat ball valves and V-segment control valves 
focusing on severe applications such as high temperature, cryogenic temperature, 
abrasive mediums, slurries, and fl ow control in various industrial processes, 
especially in oil refi nery, petrochemical, mining, pulp & paper, iron & steel mill, power 
plant and water treatment industries.
NMW | Exhibitor Profiles
58  SYDNEY 13 – 16 MAY 2014
Jiangsu Tongguang Optical Fiber Cable Co Ltd
Stand 1730-02
3966 Dasheng Road
HAIMEN JS 226100 China
Tel: +86 513 8229 8811 Fax: +86 613 9580 2954
www.tgjt.cn
jstgdavid@gmail.com
Contacts: Shi Dawei
Jiangsu Tongguang Optical Fiber Cable Co Ltd (briefl y as “TGC”) is a company listed 
on China Shenzhen Stock Exchange, Stock Symbol is 300265, the registered location 
of the company is in Jiangsu Haimen, and the registered capital at present is 65 milion 
of RMB. The Company has a R & D centre in Shanghai, the production base of the 
company with land area of 0.33 million sqm is located in Tongguang Industrial Park of 
Haimen Harbor Development Zone. The main products of the Company are: OPGW, 
ADSS, OPPC and other optical cable along power transmission line. The annual 
production capability reaches 45000Km cable.
Jiangsu Weiteli Motors - Making Co Ltd
Stand 2300-02
Gangyang Town 
TAIZHOU JS 225318 China
Tel: +86 523 89661030 Fax: +86 523 89661031
www.weiteli.cn
13951178891@163.com
Contact: Baron Zhao
Electric motors made here can be categorized into three divisions: induction motor, 
including IE2, IE3, nema and stainless steel motor; permanent magnet servo motor; 
motors used in hybrid vechicles.
Jiangsu Yangli Group Co Ltd
Stand 2300-01
99 Yangli Road 
Hanjiang Economic & Development Zone 
YANGZHOU China
Tel: +86 514 8784 8177
www.weiteli.cn
yangli@yangli.com
Contacts: Wang Yuanhong
We provide power press, press brake, shearing machine, hydraulic press, CNC press 
brake, CNC shearing machine, CNC laser cutting machine, and CNC turret punch 
machine.
John Thompson 
Stand 2545
Sacks Circle, Bellville South, PO Box 129 
BELLVILLE Western Cape 7535 South Africa
Tel: +27 21 9598400 Fax: +27 21 9598535
www.johnthompson.co.za
simonb@johnthompson.co.za
Contacts: Simon Boiskin, Martin Reck
John Thompson, based in South Africa, is a leading designer and manufacturer 
of industrial hot water and steam boilers. An ISO 9001 company, we produce an 
extensive range of coal, oil and gas fi red, fi retube boilers according to the latest 
European standards and fully compliant with Australian requirements. Our product 
range is tailored to meet the needs of various industries, small and large, from tyre 
manufacturers to the food and beverage industry. Our products are designed to 
offer high effi ciency and low maintenance operation to reduce cost of production. 
We can also provide guidance regarding the most cost-effective solution.
Josco
Stand 1015
196 Hammond Road 
DANDENONG VIC 3175
Tel: 1800 445 444 Fax: 03 9791 1877
www.josco.com.au
josvic@josco.com.au
Contact: Maury Chalmers
Josco, an Australian company that commenced in 1977, is a leading supplier of 
industrial grade surface fi nishing products and hand tools to the mining, manufacturing, 
automotive and industrial markets. Josco design, manufacture and source products 
to our specifi cations throughout the world, including our own manufacturing facility 
in Adelaide. Josco’s comprehensive range of surface fi nishing products includes 
brands such as Garryson, Dixbro, Brushworks, Josco and Josco Brumby. The range 
incorporates power brushes, hand brushes, brooms, fl ap discs, fl ap wheels, surface 
conditioning discs, polishing buffs & compounds; The Josco hand tools range includes 
Midwest Aviation Snips & Young Bros, and the Josco name is synonymous with quality, 
reliability and a commitment to serving its customers.
Jubilee Spring Co 
Stand 2539
Lot 10 Catamaran Road
OURIMBAH NSW 2258
Tel: 02 4389 1411 Fax: 02 4389 1412
www.jubilee-springs.com.au
john@jubilee-springs.com.au
Contacts: John Guest, Kylie Azzopardi, David Wagner
Jubilee Springs is the oldest Australian-owned spring manufacturer in Australia. It 
has been owned by the Guest family since 1936 and is now in its third generation. 
No job too small or big, we manufacture across a vast range of Australian 
industries specialising in springs, wire-form multi-slide components and pressings. 
We also have a large design and prototype section for all your R&D requirements.
Kap Components Australia Pty Ltd
Stand 2349
9 Oliver Place
POINT COOK VIC 3030
Tel: 03 9394 8664 
www.kapcomponents.com.au
jask@kapcomponents.com.au
Contact: Jaskirat Singh
We are a fastener manufacturer and distributor and manufacture product to customer’s 
own drawings and samples to Australian and international standards. We supply 
fasteners; hot forged bolts; eye bolts; wheel bolts and nuts; U bolts; hinges and toggle 
latches; brass parts and fi ttings; turned brass components; washers made of stainless 
steel, copper, brass and bronze; stamping (sheet metals); pins (cotter, hitch pins, 
lynch pins and R-clips); CNC machined precision parts; fabricated metal products and 
assemblies.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   59
NMW | Exhibitor Profiles
60  SYDNEY 13 – 16 MAY 2014
Kelvindale Products Pty Ltd 
Stand 2339
32 Clyde Street
RYDALMERE NSW 2116
Tel: 02 9638 0100 Fax: 02 9684 4521
www.kelvindale.com.au
ccare@kelvindale.com.au
Kelvindale Products is the largest manufacturer of plastic caps and plugs in 
Australia. We pride ourselves on being Australian-owned and our products 
Australian-made. We supply a vast range of caps and plugs to suit various 
applications. We offer plain and threaded caps and plugs as well as fl ange 
protectors and large caps. Our sizes are made to suit most applications. We offer 
a free try-before-you-buy service. As most of our products are available ex stock 
we can process your order for despatch from our warehouse on the same day it is 
placed. We also offer a custom moulding service.
Kinetic Cutting Systems
Stand 2849 
30 Triton Drive
ALBANY 0751 New Zealand
Tel: +64 9 968 8368 
www.kineticusa.com
sales@kineticusa.com
Contact: Murray Forlong
Kinetic’s XMC combination machines combine machining and plasma cutting into one 
machine. These machines don’t just cut profi les; they make fi nished parts and they do 
it fast. The machines are capable of drilling, milling, counter-boring, counter-sinking 
and plasma and oxy fuel cutting out of the parts. Options for the machines include 
Hypertherm plasma systems, bevel systems, oxy-fuel torches, marking systems, and 
pipe cutting. Kinetic dry cutting tables allow for full through spindle coolant for fast and 
deep hole drilling with full coolant recycling. Come and visit Kinetic at stand 2849 and 
see which machine best suits your needs.
KLINGSPOR Australia Pty Ltd 
Stand 2224
120 Beaconsfield Street
SILVERWATER NSW 2128
Tel: 02 9737 0597 Fax: 02 9737 0598
www.klingspor.com
paul.hoye@klingspor.com.au
Contacts: Paul Hoye, David Svrakov, Branko Popec
We are abrasive tool manufacturers.
Kobot Systems Pty Ltd
Stand 1515
3 Mast Place
OCEAN REEF WA 6027
Tel: 08 9307 8178 Fax: 08 9402 2756
www.kobot.com.au
gkoh@kobot.com.au
Contact: Gerald Koh
We are displaying electric torque screwdrivers, collapsible material handling stillages 
and a new innovative waterproofi ng solution from Europlasma.
Kockums Bulk Systems Pty Ltd
Stand 2231
139 Bamfield Road
WEST HEIDELBERG VIC 3801
Tel: 03 9457 8230 Fax: 03 9457 7695
www.kockumsbulk.com.au
s.raebel@kockumsbulk.com.au 
Contacts: Vince Allon, Lyndon Duff, Shaun Raebel,
Jason Groves
Kockums Bulk Systems specialises in the design and supply of powder-handling 
systems from raw materials in through to packed goods out. Our diverse product 
range includes bulk bag fi lling and emptying, IBC systems, aero-mechanical conveyors, 
pneumatic conveying, silo discharge aids, weighing, metering, bagging, palletising 
systems and wrapping and hooding. We are also an industry-leading innovator in the 
fi eld of vacuum-assisted lifting solutions. At NMW 2014 we will be exhibiting a range 
of lifting systems including the super quick VacuCobra, custom feet, lift carts and a 
vacuum conveyor for transferring powders.
KYOCERA Asia Pacifi c Pte Ltd
Stand 2448 
61 Tai Seng Avenue #01-04 UE Print Media Hub
SINGAPORE 534167 Singapore
Tel: +65 6590 9124 Fax: +65 6590 9139
www.kyocera.com.sg/ct/
m-tsuchida@kyocera.com.sg
Contact: Mariko Tsuchida
We contribute to the betterment of worldwide manufacturing and our customers’ 
productivity by providing effi cient cutting tool products and high-precision tooling 
solutions. KYOCERA started producing ceramic cutting tools in 1971: today we are 
one of the leading manufacturers in the world. Our wide range of products features 
innovative technology for turning, grooving, threading, cut-off, drilling and milling, based 
on diverse cutting materials including carbide, cermet, ceramic, CBN and PCD.
Lan Shiuon PTFE Industry Co Ltd
Stand 1415-06 
7 Shuangfeng Road, Xinzhuang 
NEW TAIPEI 24256 Taiwan 
Tel: +886 2 2209 2207 Fax: +886 2 2908 1172
www.ptfe.com.tw 
lanshiuon@ptfe.com.tw 
Contact: Rose Lee
Lan Shiuon was founded in 1988. Lan Shiuon specialises in manufacturing all kinds of 
PTFE related products. Starting out from PTFE ball valve parts, now it has expended 
into various product lines. The rapid growth of its business is attributable to its high 
quality products, competitive prices and well-rounded services.
Langfang Shengsen Abrasives Co Ltd
Stand 2400-04
Beiwei Development Zone Dacheng 
LANGFANG HB 065901 China
Tel: +86 316 593 4338 Fax: +86 316 593 4336
www.shengsencn.com
yangming@mail.cmec.com
Contacts: Xu Shengying
Sales network: we have sales network in major cities across the country and had 
become a popular brand, while exports reached more than 70% exporting to South 
east Asia, South Africa, Middle East ,Europe and USA, and highly praised by the users. 
Product: fi ber reinforced grinding and cutting wheel, fl ap disc, sand coth, sand paper, 
and sand belt, wool polishing wheel, Velcro disc, and diamond blade etc.! We mainly 
accept OEM business.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   61
NMW | Exhibitor Profiles
62  SYDNEY 13 – 16 MAY 2014
Laser & Sign Technology Pty Ltd
Stand 1431 
109 Bonds Road
PUNCHBOWL NSW 2196
Tel: 02 9584 9499 Fax: 02 9584 9550
www.lastech.com.au
leena@lastech.com.au
Contacts: Rob Thompson, Bryson Strolin, Chris Hill,
Zed Zhong
Laser & Sign Technology distributes laser systems from Universal Laser Systems 
(USA) and SEI Lasers (Italy), Type3 (France) CAD/CAM software and has been recently 
appointed as distributor of envisionTEC (Germany) 3D printers. With resolution and 
surface fi nish unmatched by any other rapid prototyping system, envisionTEC 3D 
printing solutions utilise DLP and 3SP technology to quickly and cleanly build models 
in a large range of materials covering all manufacturing processes. Our team includes 
laser physicists, engineers and fully trained technicians providing you with experienced 
sales people and qualifi ed technical support.
Lavender Composites
Stand 2618 
10/10 Miltiadis Street
ACACIA RIDGE QLD 4110
Tel: 07 3255 6924 Fax: 07 3255 6923
www.lavendercomposites.com.au
sheading@lavender-ce.com
Contacts: Simon Heading, Doug McDonald,
Rudi Steinbusch
Lavender Composites is renowned Australia-wide as one of the leading suppliers of 
performance composite materials and consumables. We have always strived to be at 
the forefront of our industry, and to do this we need to evolve and keep up with clients’ 
requirements. It comes as no surprise that companies are seeing the benefi ts of the 
current trend.
LEAP Australia
Stand 1639 
Suite 20, 74–78 The Corso
MANLY NSW 2095
Tel: 1300 882 240 Fax: 02 8966 7899
www.leapaust.com.au
info@leapaust.com.au
Contacts: Nick Goodall, Paul O’Shaughnessy,
David Graham
LEAP is an engineering solutions business — LEAP stands for Leading Engineering 
Application Providers. Our focus is on solving our customers’ engineering problems by 
combining our staff’s extensive real world experience with market leading technology. 
Our customers can expect high-quality products and support when they choose us 
to assist them with their product development requirements. We treat our customers’ 
businesses as we would our own. LEAP represents the largest CAD, CAID, CAM, 
DEM, FEA, CFD, CEM, PDM, DEM and PLM reseller in Australia and New Zealand, 
supporting users of PTC® and ANSYS products in the ANZ region.
Leussink Engineering Pty Ltd
Stand 1819
16–18 Doyle Avenue
UNANDERRA NSW 2526
Tel: 02 4260 7777 Fax: 02 4260 7788
www.leussink.com.au
russell@leussink.com.au
Contacts: Russell Brinkworth, Mark Pearson,
Jason Leussink, Kenley Leussink, Ray Leussink
Simple but ingenious, Leussink Engineering manufactures the world-class Demmeler 
3D modular fi xturing solution, holding and jigging parts quickly and accurately in 
position for fabrication or assembly whilst being able to adjust dimensionally for 
engineering changes to the fi nished part easily. Visit stand 1819 to witness the 
competitive advantage.
Lightwave Technology
Stand 1638
14 Stephenson Road
BAYSWATER VIC 3153
Tel: 03 9720 6222 Fax: 03 9720 6565
www.lightwavetechnology.com.au
sales@lightwavetechnology.com.au
Contact: Justin Davis
Lightwave Technology, a division of Oryvillia Pty Ltd, has been a qualifi ed supplier 
of the manufacturing, construction and surveying industries since 1990 in Australia. 
Lightwave Technology Is the Australian distributor for Faro Metrology products and we 
will be showcasing these products and software at the exhibition. We cover all aspects 
of high accuracy measurement, 3D documentation, dimensional control qualifi cation, 
reverse engineering and rapid prototyping. We also offer an extensive product range 
of accessories, consumables, optical instruments, lasers, total stations, GPS, machine 
control systems and software.
Linear Technik Pty Ltd
Stand 1509 
Unit 13, 18–22 Williams Road
DANDENONG VIC 3175
Tel: 03 9706 7888 Fax: 03 9706 7488
www.lineartechnik.com.au
karl@lineartechnik.com.au
Contacts: Karl Maier, Enzo Pampanella, Chris Dane, 
Michael Hart, Eithna Hall
Linear Technik is a specialist supplier of linear motion and assembly components. 
We offer a comprehensive range of products including linear bearings, profi le rail 
guides, ball screws, ball transfer units, rod ends, precision shafting, linear actuators, 
and trapazoidal screws. We also specialise in a complete range of aluminium profi le 
assembly systems. We represent some of the world’s leading brands including, SKF, 
PMI, WON, Bosch Rexroth, Dabasix, RK Rose + Krieger, Moteck, Durbal and NB. We 
cover all industries including, manufacturing, packaging, medical, automation, robotics, 
general engineering and the food industries. We offer technical support and have a fully 
equipped workshop to service our entire product range.
Mackay Consolidated Industries Pty Ltd 
Stand 2639
260 Chesterville Road
MOORABBIN VIC 3189
Tel: 03 9276 4697 Fax: 03 9276 8880
www.mackayrubber.com.au
geoff.geist@mackayrubber.com.au
Contacts: Geoff Geist, Bronte Boyle
Mackay is a major supplier of a diverse range of engineered rubber and 
bonded metal/rubber composite products. Mackay provides advanced design 
technologies and skills, breadth and depth of expertise, advanced rubber 
development expertise, and a variety of manufacturing processes. Providing 
industry with the most extensive range of vibration isolators and, combined with 
wide availability through a network of distributors, Mackay’s standard products 
range is the fi rst choice for original equipment and replacement. From mounting 
delicate equipment to very large engine sets, Mackay has a standard mount for 
the application. 
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   63
NMW | Exhibitor Profiles
64  SYDNEY 13 – 16 MAY 2014
Manufacturers’ Monthly/Ferret.com.au 
Stand 1644 
Level 3, Tower 2, 475 Victoria Avenue 
CHATSWOOD NSW 2067
Tel: 02 9422 2642 Fax: 02 9422 2633
Manmonthly.com.au
dale.henry@cirrusmedia.com.au
Contacts: Tim Richards, Anthony Head, Michael Northcott, 
Max Kolomiiets, Nicholas Storey
Manufacturers’ Monthly has informed Australia’s manufacturing sector since 
1961. With an audited circulation of 17,385, Manufacturers’ Monthly targets 
senior level and operational management and covers industry, management, 
IT, technology, and product news. Manmonthly.com.au, keeps the industry up-to-date with daily content on news, jobs and products and a daily e-newsletter. 
Visit us at stand 1644 to pick up a free copy of Manufacturers’ Monthly or come 
have a chat with us at the show to discuss our advertising and lead generation 
solutions. This year our stand will also have the presence of one of Australia’s 
leading manufacturing directories - Ferret. Owned and operated by Catch, Ferret.
com.au boasts large online directories for the manufacturing, industrial and 
mining sectors.
Mayo Hardware
Stand 1015 
4 Secombe Place
MOOREBANK NSW 2170
Tel: 1300 360 211
www.safesite.com.au 
sitesurvey@mayohardware.com.au
Contacts: Jeff Wilson, Elliot Minervini, Simon Kotz
The SafeSite Program by Mayo Hardware delivers the mining, power generation, 
manufacturing, utilities, transport and oil & gas industries customised lockout tagout 
solutions that are designed to meet the specifi c needs of each site. The SafeSite 
Program includes site assessments and lockout tagout workshops involving all 
key stakeholders, master lock safety padlocks and lockout accessories, custom 
key systems, lockout tagout procedure review and development, a broad range 
of plant identifi cation solutions and ongoing ‘health checks’ post lockout tagout 
implementation. To learn more about the SafeSite Program, visit the Mayo Hardware 
team at stand 1015 at National Manufacturing Week.
Melbourne Centre for Nanofabrication
Stand 2423 
151 Wellington Road
CLAYTON VIC 3168
Tel: 03 9902 4073
www.nanomelbourne.com
mcn-enquiries@nanomelbourne.com
Contacts: Lachlan Hyde, Paul Spizzirri, Dwayne Kirk
MCN is a state-of-the-art nanofabrication facility which provides open access to 
cutting-edge micro and nanofabrication equipment and technologies as well as the 
expertise to support innovative projects. We offer corporate residencies as well as 
short-term engagements, training your staff to independently use our facilities. We also 
offer service on demand solutions and can collaborate on design and prototyping. 
MCN has key expertise in lithography, thin fi lm deposition, chemical etching, reactive 
ion etching and characterisation, using a broad range of materials. We are particularly 
relevant in application areas such as energy, biosensing, micro-nano fl uidics, 
nanomedicine, MEMS, optics and medical bionics.
Metal Science Technologies Pty Ltd
Stand 1344
43 Shelley Road
MORUYA NSW 2537
Tel: 02 44743 394 
www.metalscience.com.au
cerys@metalscience.com.au
Contacts: Cerys Hawkins, Dean Klower, Ciaran 
Funder, Jamie Field
Drop by the Metal Science Technologies stand to see the latest developments in the 
post-weld fi nishing of stainless steel using electro-chemical machinery. You will be able 
to see fi rst-hand the largest brush electrode worldwide on our latest M-Style handle. 
For anyone doing heavy gauge stainless work, this is the latest and greatest weapon of 
choice to have in your arsenal.
MIGAS
Stand 1327
Suite 2, First Floor, 58 Memorial Avenue 
LIVERPOOL NSW 2170
Tel: 02 9821 1233 Fax: 02 9821 1322
www.migas.com.au
enquiries@migas.com.au
Contacts: Matthew Stewart, Natasha Hughes
Who is Australia’s leading workforce development organisation with a national 
footprint? Who delivers traditional group training services and apprentice 
management services? MIGAS is your Australia-wide, full service workforce 
development company, with over 25 years in the manufacturing, mining, 
and electrotechnology industries. Along with group training and apprentice 
management services, MIGAS offers labour hire, trade workforce recruitment, 
upskilling and dual trading to businesses across the country. Big things are 
happening at MIGAS. “What’s next for MIGAS?” - go to stand 1327 to fi nd out.
Millsom Materials Handling 
Stand 1519
25 Turbo Drive
BAYSWATER VIC 3153
Tel: 03 9720 7966 Fax: 03 9720 7879
www.millsom.com.au
sales@millsom.com.au
Millsom Materials Handling specialises in vacuum lifting equipment, vacuum 
components and gripper systems along with our complete range of jib cranes, 
bridge cranes and low friction track systems. We provide solutions to almost 
every lifting and handling requirement across Australia and New Zealand. At NMW 
2014 we will have the new vacuum lifter Jumbo Flex 50 on display allowing you 
to handle almost anything weighing up to 50kg. We will also have a sample of our 
vacuum components, with over 5000 different products in the range; Schmalz is 
one of the largest suppliers of vacuum equipment for automation systems.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   65
Modern Tools
Stand 2239
2/2 Newcastle Road
BAYSWATER VIC 3153
Tel: 03 9761 2929 Fax: 03 9761 1752
www.moderntools.com.au
info@moderntools.com.au
Contacts: Darren Moyle, Phillip Caruso
Modern Tools will be launching the new Siegmund S4 Extreme welding and 
positioning table. The Extreme table has a much harder surface (700 Vickers) than 
the standard tables, making it much more rust, scratch and weld spatter resistant 
than other tables. We will also have the popular plasma nitrate surface on display. 
Other products on display will be SmartVent fume extractors and down draft welding 
tables, Sky Hook lifting cranes, FIRST precision milling machines, Hwacheon high 
quality precision lathes, Fagor digital display systems, Algra & Haase quick-change 
tool posts and Repar safety guards.
Moreton Bay Regional Council 
Stand 2223
220 Gympie Road
STRATHPINE QLD 4500
Tel: 0409 305 563 
www.moretonbay.qld.gov.au
mark.forbes@moretonbay.qld.gov.au
Contact: Mark Forbes 0409 305 563
The Moreton Bay Region provides the perfect balance between business 
and lifestyle. Strategically located to the north of the Brisbane CBD the region 
provides direct access to Brisbane International and Domestic Airports, the Port 
of Brisbane and to the Australian Trade Coast enabling businesses to access 
both domestic and international markets with ease. Our current projects include 
the $45m offi ce space and community building at North Lakes, construction of 
six new railway stations for the Moreton Bay Rail Link and a proposed university.
MOSCA Strapping Systems
Stand 1814 
Unit 6, 58 Fredrick Street 
NORTHGATE QLD 4013 
Tel: 07 3266 3055
www.mosca.com 
brenda.portersmith@mosca-australia.com
Contacts: Brenda Porter-Smith –Marketing Manager, 
Dale Smith –Managing Director,
Nat Robson –Business Development Executive
MOSCA was founded in Germany over 48 years ago for the sole purpose of 
developing and manufacturing strapping machines and materials. MOSCA has 
grown to become a worldwide leader in strapping technology. During this time we 
have introduced many world fi rsts in design and strapping technology; the latest is 
ultrasonic sealing which uses much less power than conventional techniques. Here in 
Australia, we are a key supplier to a number of large multinational, medium and small 
organisations within a variety of industries including the corrugated board, print and 
meat processing, to name a few.
Motion Solutions Australia Pty Ltd
Stand 1329
Factory 2, 21/29 Railway Avenue
HUNTINGDALE VIC 3166
Tel: 03 9563 0115 Fax: 03 9568 4667
www.motion-solutions.com.au
sales@motion-solutions.com.au
Contacts: Matthew Dorhauer, Saul Zavarace,
Clem Berenger, Brendan Meyers
Motion Solutions Australia Pty Ltd supplies high quality automation and control 
equipment to a variety of industries. Our experienced team are able to assist, support 
and advise on all motion control requirements. Our HMI and industrial computer 
partner, PROFACE, provides a highly user-friendly interface for professionals in the 
industrial automation environment. Our robotics partner EPSON ROBOTS, is a 
supplier of class leading SCARA and six axis robots that provides solutions for a 
variety of industries. The EPSON ROBOTS development environment is intuitive and 
simple to use and the integrated options offer includes vision guidance and conveyor 
tracking. Motion Solutions Australia along with our partners back our products with 
excellent customer service and support.
Multicam Systems Pty Ltd
Stand 2139 
60 Enterprise Drive, Holmwood Business Park 
BERESFIELD SOUTH NSW 2322
Tel: 02 4964 1900 Fax: 02 4964 1911
www.multicam.com.au
sales@multicam.com.au
Multicam CNC routing machines are designed for profi le cutting sheet product and 
extrusions including metals, plastics, composite materials, and timber products. They 
are used in the manufacture of aluminium boats, aerospace components, truck body 
parts, caravan and motor home components, kitchens, furniture or any other fl at 
sheet product. Specialist features ensure that Multicam machines are an excellent 
alternative to plasma and laser machines, which have higher running costs and 
greater servicing demands. Process areas start from 2500x1300mm with larger and 
custom sizes available. Multicam machines can be supplied with vacuum hold-down 
and fully automatic rotary tool change systems.
Mumme Tools Pty Ltd 
Stand 1015 
25 Aldershot Road
LONSDALE SA 5160
Tel: 08 8186 0000 Fax: 08 8186 2222
www.mummetools.com 
info@mummetools.com
Contact: Phil Taylor
Mumme Tools Pty Ltd is the manufacturer of Australia’s leading brand of forged hand 
tools and industrial ladders & trestles, Mumme products sells Mumme products 
to distributors throughout the world. Mumme Tools Pty Ltd also manufactures 
custom-made tools and forgings upon request. Mumme Tools Pty Ltd is also the sole 
distributor throughout Australia and Oceania of products from Klein Tools, the quality 
USA brand of the largest range of electrician’s hand tools in the world. This range of 
over 3000 products includes pliers, insulated tools, test and measurement products, 
data tools and much more.
National Safety Council of Australia Ltd
Stand 2816
Suite 901, Level 9, 418a Elizabeth Street 
SURRY HILLS NSW 2010
Tel: 1800 655 510 Fax: 02 9213 6222
www.nsca.org.au
tracy.bradley@nsca.org.au
Contacts: Mirjana Gallagher –Central Region
Manager, 
Tracy Bradley –National Marketing Manager, 
Phil Archer –Business Development Manager ACT/
NSW, Mark Moskvitch –Senior WHS Consultant
The National Safety Council of Australia (NSCA) is a national, not-for-profi t, 
member-based organisation providing training, consulting and auditing services to 
organisations and individuals, ensuring continuous improvement to their work health 
and safety. NSCA protects your most important asset – people. Visit our website for 
more information.
NMW | Exhibitor Profiles
66  SYDNEY 13 – 16 MAY 2014
NetSuite
Stand 1633 
Suite 2, Level 13, 100 Arthur Street 
NORTH SYDNEY NSW 2060
Tel: 02 9464 6100 Fax: 02 4932 3099
www.netsuite.com.au
infoanz@netsuite.com
Contacts: Dante Dell’Agnese –Manufacturing Account 
Executive, Mathew Panicker –Senior Consultant
Today, more than 20,000 companies and subsidiaries depend on NetSuite to run 
complex, mission-critical business processes globally in the cloud. Since 1998, 
NetSuite has established itself as the leading provider of enterprise-class cloud 
fi nancials/ERP suites for divisions of large enterprises and mid-sized organisations 
seeking to upgrade their antiquated client/server ERP systems. Recently named by 
Gartner study as the fastest growing fi nancial management software vendor on a 
global basis, NetSuite continues its success in delivering the best cloud ERP/fi nancials 
suites to businesses around the world, enabling lower IT costs while increasing 
productivity, as the global adoption of the cloud is accelerating.
New Zealand Engineering News
Stand 2343
9 Anzac Street, Takapuna
AUCKLAND 0622 New Zealand
www.engineeringnews.co.nz
ahobbs@hayleymedia.com
Contacts: Keith Falloon, Andy Hobbs
New Zealand Engineering News is the leading Industrial news magazine distributed 
to 9800 engineering and industrial businesses throughout New Zealand every Month. 
The magazine contains 8 key sectors: automation, design, power systems, machinery, 
materials, environment, workshop and management. NZEN was established in 1967 
and has been the leading industrial publication ever since. Our website, newsletters 
and social media extend your marketing to these sectors in New Zealand, Our 
marketing opportunities include very strong advertising/content relationship where 
advertisers are supported by our team of journalists and contributors. We do not 
accept advertorial but we do accept excellent editorial content.
Nextool Technology Co Ltd
Stand 2248
Economic & Technical Development Zone
TONGLING AH 244000 China
Tel: +86 138 6562 5933 Fax: +86 562 5880883
www.nextooling.com
practice@nextooling.com
Nextool is a professional manufacturer of PVC windows and doors profi le and 
downstream equipment. There are more than 300 employees working in our 40,000 
square metre areas. Nextool is private share-holding system with net worth up to $15 
million. In the past seven years, we have set up sales and service branch companies or 
agencies in more than ten countries in the world, with more than 28 years’ experience 
in tooling design, manufacturing, tuning and after sales service. Nextool has achieved 
30 technical patents, has more than 300 stable customers in more than 30 countries 
and exports more than 5000 toolings. Customers include: Veka, REHAU, aluplast, 
Profi ne, and Nuform. 
Ningbo Yin Zhou Dutian Import & Export Co Ltd
Stand 1629 
928 Chengxin Road Yin Zhou District
NINGBO ZJ 315200 China
Tel: +86 189 68321359 Fax: +86 574 83016237
www.nadway.com
sales@nadway.com
We specialise in producing low voltage electrical products, such as weatherproof plugs 
and sockets, AC contactors, circuit breakers, relays, home electrical supplies and 
outdoor wares. We started with the Australian waterproof industrial electric series and 
have focused on the Australian and Oceania market for several years. We are exhibiting 
plugs and sockets, switches, circuit breakers, exhaust fans, PVC conduit and fi ttings, 
wire and cable, portable distribution boards, and lamps, widely used in the Oceania 
market and complying with Australian standards. We sincerely wish to establish long-time relationships with our partners in 2014. Together we have a bright future!
Nitto Kohki Australia Pty Ltd
Stand 2136
77 Brandl Street
EIGHT MILE PLAINS QLD 4113
Tel: 07 3340 4600 Fax: 07 3340 4640
www.nitto-australia.com.au
sbirch@nitto-australia.com.au
Contacts: Stephen Birch, Dave Agnew, Mark Mander
Nitto Kohki Australia will be demonstrating its Atra Ace range of magnetic drilling 
machines and OZBROACH annular cutters. We will also be demonstrating Nitto 
Kohki’s air and fl uid quick-connecting Cuplas. On display we will have our heavy 
industrial range of Nitto Kohki and Kuken air tools and our specialised range of hose 
assemblies and polyurethane spiral hoses. Also on display we will have Cembre 
Robokatta, a fully automatic rail cutting unit, and Cembre rail drilling machines. 
Displayed also will be Nitto Kohki’s Medo range of linear air compressors and vacuum 
pumps.
NOF Metal Coatings Asia Pacifi c Co Ltd
Stand 2612 
3-3 Chidori-Cho, Kawasaki-Ku 
KAWASAKI CITY Kanagawa 210-0865 Japan
Tel: +81 44 280 3017 Fax: +81 44 280 3119
www.nofmetalcoatings.com
sales-ap@nofmetalcoatings.com
NOF Metal Coatings Group provides high performance surface treatment for the 
protection of the environment using frontier technologies that are environmentally 
friendly. For more than 30 years, our worldwide network of companies has been 
working closely to develop high-performance, thin-layer anticorrosion systems. After 
inventing zinc fl ake coatings, we have improved, and are continuing to improve our 
products to meet increasing market requirements. Our product, GEOMET®, is a water-based, completely chromium-free coating mainly for the automotive and construction 
industries.
Norbar Torque Tools
Stand 1015
C/- 45-47 Raglan Avenue 
EDWARDSTOWN SA 5039
Tel: 08 8292 9777 Fax: 08 8292 9799
www.norbar.com.au
robert.nash@norbar.com.au
Contacts: Edmund Cueno, Robert Nash, Wayne Telley
Norbar is the world’s leading torque specialist with one of the most modern and 
largest factories devoted exclusively to the design, development and production of 
torque tightening and measuring equipment. Norbar equipment is used by world class 
manufacturers around the globe. All of them see reliability and accuracy as critical to 
their success. Our aim is to give you peace of mind that your bolted connections have 
been completed to your requirements.
Norton Hardware
Stand 2140
Unit C, 2 Floor, Wah Lik Industrial Centre 
TSUEN WAN HK China
Tel: +852 2720 8231 Fax: +852 2725 6305
www.nortonhardware.com.hk
edgar@nortonhardware.com.hk
Contacts: Leung Wai Chun –Sales Manager, 
Edgar Juy Lok –Project Manager, 
Edgard Vatcky –Enginner
Norton Hardware Company Limited offers multiple services in investment casting (lost-wax casting), metal stamping, machining, fi nishing as well as assembling. Our products 
are widely used in various kinds of construction, manufacturing, machinery, home 
supplies and armament industries.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   67
NMW | Exhibitor Profiles
68  SYDNEY 13 – 16 MAY 2014
NSW Department of Trade and Investment 
Stand 1925
GPO Box 5477
SYDNEY NSW 2001
Tel: 02 9338 6757 Fax: 02 9338 6769
www.business.nsw.gov.au
graham.bulless@business.nsw.gov.au
Contacts: Graham Bulless –Senior Manager, 
Ahmed Awil –Senior Project Officer, 
John Scilly –Senior Project Officer, 
Tony Green –Manager –Wollongong, 
Nicolas Van Der Voort –Manager –Newcastle
The NSW Trade and Investment is the lead economic development agency in 
New South Wales, responsible for driving sustainable economic growth across 
the State. We achieve this by collaborating with and supporting businesses, 
industries and communities to advance investment, trade, innovation, productivity 
and regional growth across all sectors. Manufacturing in NSW is highly developed 
and diverse. The sector employs over 233,400 and accounted for $35 billion of 
industry value added in 2012-13. NSW manufacturers spend some $1.3 billion 
annually on R&D, second only to fi nancial services. The sector is a strong driver 
of our State’s prosperity, both in terms of GDP and employment. NSW leads in 
Elaborately Transformed Manufactures (ETMs), where exports grew 11% from 
2009-10 to 2011-12.
Obara Australia Pty Ltd
Stand 1425
Factory 7, 101 Wedgewood Road
HALLAM VIC 3803
Tel: 03 8795 0100 Fax: 03 8795 0133
www.obara-aust.com.au
rob@obara-aust.com.au
Contacts: Robert Orlando, Neil Parkins, Alberto Coral
Whilst Obara is renowned for welding equipment, we continue to look at and focus 
on new ways to improve and support our customers. For many years Obara Australia 
has represented Coral SPA, an Italian manufacturer of dust and fume extraction 
equipment. Their group includes Depureco Srl (industrial vacuums) and Filcar SPA 
(auto engineering).
Oceanic Controls
Stand 1113
Unit 2, 11 Forge Close
SUMNER QLD 4074
Tel: 07 3715 7771 Fax: 07 3715 7775
www.oceaniccontrols.com.au
andrew@oceaniccontrols.com.au
Contact: Andrew Allinson
Oceanic Controls is the exclusive Australian distributor for the world’s leading control 
brands including Kimray pressure regulators and controls; Taylor choke valves and 
safety relief valves; Belgas pressure regulators and Dynafl o control valves, and is a 
stocking distributor for the range of Balon ball valves, check valves and needle valves. 
Oceanic Controls is also the exclusive distributor in Queensland, NSW, Victoria and 
South Australia for the range of Cameron measurement systems and incorporates 
brands such as Barton, Nufl o, Caldon, Jiskoot and more.
Ogis Engineering Pty Ltd
Stand 2645 
PO Box 166
ROSEBERY NSW 1445
Tel: 02 9313 3777 Fax: 02 9313 5511
www.ogis.com.au
kevin@ogis.com.au
Contacts: Kevin Adler, Mark Taylor, Nick Turrell
We supply specialist tube and pipe benders from 6mm diameter up to 88.9mm 
diameter. We also offer tube and pipe rolling; complete welding facilities including 
robot welding; and an express manufacturing service for urgent jobs with dramatically 
reduced lead times.
OneCNC CAD CAM
Stand 1640 
65 Gordon Street
ORMISTON QLD 4160
Tel: 07 3286 2527 Fax: 07 3286 4992
www.onecnc.com.au
bob@onecnc.com.au
OneCNC CAD CAM was fi rst created in Australia in 1983 by QARM Pty Ltd, which 
is one of the pioneer developers of PC-based computer-aided manufacturing CAD/
CAM software. QARM was one of the fi rst to introduce CAD/CAM software designed 
for both machinists and engineers to run on mainstream desktop PCs. OneCNC 
is QARM’s developed product, which started as a 2D CAM system with CAD tools 
that let machinists design mechanical parts on a personal computer screen to guide 
computer numerical controlled CNC machine tools to manufacture those parts.
Pan Taiwan Enterprise Co Ltd
Stand 1415-04 
16F-1, 16 Jian Ba Road, Zhonghe 
NEW TAIPEI 23511 Taiwan
Tel: +886 2 8226 5199 Fax: +886 2 8226 5196
oem.pantaiwan.com.tw
oem@pantaiwan.com.tw
Contacts: Vivian Chao, Jane Wang, Alan Lin
We can help you with plastic injection, stamping, machining, forging & die casting, 
MIM, investment casting (LostWax), rubber moulding, assembly & test service, total 
solution service.
Panasonic Robot Welding Systems
Stand 1237
Unit 122, 7 Hoyle Avenue 
CASTLE HILL NSW 2154
Tel: 0450 546 835 Fax: 02 9016 4404
www.orionautomation.com.au
sales@orionautomation.com.au
Contacts: Jeff Fordham –Managing Director
As the manufacturer of both robots and arc welding power sources, Panasonic’s 
engineers gain experience unrivalled in the industry. The continually-evolving Panasonic 
TAWERS robot series combines industry-leading welding and robotic technology into 
a common platform using embedded arc control (EAC). The PerformArc line of pre-engineered systems are designed with Panasonic servo positioners, welders, robots 
and decades of industry experience to help make your investment into automation 
the least of your day-to-day worries. Our goal is to support the entire industry with ‘all 
from one’ Panasonic robotic solutions in the fi eld of robotic MIG and TIG welding and 
robotic plasma cutting applications. Please also contact us for service, parts, technical 
support, product training and software solutions.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   69
We’ve done it again ... Australian first!
Investing in technology sets us apart so you can 
benefi t from our leading Metal Forming Solutions.
Woodland Metal Spinning (Aust.) is proud to announce the 
arrival of a NEW Leifeld (Germany) SC 310s.
Our team can now accurately form Mild Steel up to 8mm 
and Stainless Steel up to 6mm.
✓Maximum Blank Diameter up to 1200mm
✓Mild Steel to 8mm
✓Stainless Steel to 6mm
✓Aluminum to 8mm
Call today to see how we can deliver unmatched 
precision, on-time, on-budget product and components. 
OR VISIT www.woodland.net.au
Woodland Metal Spinning Pty Ltd
81 Airds Rd Minto NSW 2566
PO Box 5198 Minto BC NSW 2566
Australia-Wide Service and Delivery
P+612 9824 5677
F+612 9824 5688
Esales@woodland.net.au
Customer Focus • Innovation • Quality
NMW | Exhibitor Profiles
70  SYDNEY 13 – 16 MAY 2014
Performance Waterjet
Stand 2031
33 Besser Crescent 
CAMDALE TAS 7320
Tel: 1300 722 559 Fax: 1300 733 635
www.performancewaterjet.com.au
sales@performancewaterjet.com.au
Contacts: Lester Selby, Charles Reynolds,
Jeffrey Harris
Performance Waterjet is a leading Australian supplier of waterjet cutting systems, 
consumables and accessories. We offer waterjet cutting solutions for a complete range 
of cutting applications including aluminium, stainless steel, hardened steels, glass, 
tile, plastics and composite panel. Our range of equipment includes fi ve axis waterjet 
systems, gantry or cantilever style waterjet tables and a complete inventory of spare 
parts. Performance Waterjet is the Australian distributor for KMT Waterjet, H20JET, 
Soitaab, GMA Garnet and Roctec waterjet products. At our stand we will be displaying 
the Dualine combination plasma waterjet. See the Dualine and talk to our friendly team 
about your application.
PFERD Australia 
Stand 1037
1-3 Conifer Crescent
DINGLEY VIC 3172
Tel: 03 9565 3200 Fax: 03 9565 3299
www.pferd.com.au 
customerservice@pferd.com.au
Contact: Jon Crispin
The PFERD products that will be displayed and demonstrated are based on our 
innovation and manufacturing experience, with over 200 years in providing our 
customers the best products for abrasive solutions. Products are specialised to meet 
the demands in areas of: long life; high stock removal; time-saving factor; and ease 
of use. These elements, backed by our hands-on sales team, further support our 
capability of solving and supporting application problems, training and safety. PFERD is 
the specialist in product and support when it comes to abrasives.
Plastral Pty Ltd
Stand 1444
130 Denison Street
HILLSDALE NSW 2036
Tel: 02 9695 3200 Fax: 02 9695 3222
www.plastral.com.au
andreww@plastral.com.au
Contact: Andrew Webb
Plastral Pty Ltd represents and distributes Leister hot air welding equipment and 
Ritmo plastic pipe welding equipment as well as Simona sheet plastics throughout 
Australia together with authorised distributors and service centres. Sheet plastics and 
plastic welding equipment are used in a multitude of applications in the mining industry 
including welding of geomembranes, pipelines and plastic tank manufacture.
Portable Analytical Solutions Pty Ltd
Stand 1310
PO Box 4185
COPACABANA NSW 2251
Tel: 02 4381 2844 Fax:02 8088 4386
www.PortableAS.com
mrattos@portableas.com
Contact: Thermo Fisher Scientific
Portable Analytical Solutions (PAS) is the exclusive distributor of the Niton XRF range 
of analysers in Australia, and New Zealand region. The Niton range provides rapid 
identifi cation of alloy chemistry of more than 400 alloy grades, making it a particularly 
useful instrument in the engineering and manufacturing industry. With a nondestructive 
method of testing, the Niton allows you to collect real-time data in seconds, thereby 
eliminating the need for off-site laboratories, saving you both time and money. With 
offi ces located in Sydney, Perth and Melbourne, PAS provides expert advice, sales, 
ongoing customer support and local technical service.
Positive Camtec
Stand 2935
71 Derby Street
SILVERWATER NSW 2128
Tel: 1300 895 939 Fax: 02 9898 3799
www.positivecamtec.com.au
info@positivecamtec.com.au
Contacts: Philip Trumble, Brenden Dunn, Brett Burns, 
Alfred David, Simon Averell
We are an industry leader in the supply of CNC routers, laser cutters and engravers, 
UV fl atbed printers, eco-solvent printers and a range of hardware, software and 
consumables for Australian manufacturing industries. With over 20 years’ experience, 
we offer the right advice, the right equipment and the right service and support. We 
strive to offer solutions that make real fi nancial sense to your business and to work 
with you to keep you in production. Our mission is to supply the very best machinery, 
powered by the very best consumables and always to exceed the expectations of our 
clients. On-site installation and training is all part of the Positive Camtec package.
Powerbox Australia Pty Ltd/
M Rutty & Co Pty Ltd
Stand 1824
4 Beaumont Road
MT KURING-GAI NSW 2080
Tel: 02 9457 2204 Fax: 02 9457 2255
www.powerbox.com.au 
tjones@powerbox.com.au
Contacts: Tim Jones, Kurt Weber, Marc Rutty,
Dallas Ko, James Rutty
Powerbox Australia Pty Ltd is the market leader in providing power supply solutions, 
targeting challenging applications within the electronics and industrial industries. 
At NMW 2014 we are exhibiting a large range of AC/DC power supplies, DC/DC 
converters and battery chargers, used in switchboard manufacturing, industrial control, 
SCADA, communications, security, and rail transport applications. Our sister company 
M Rutty & Co is exhibiting a variety of low voltage DC drive applications in linear, and 
rotary industries from servo to CAN and PROFIBUS controlled applications.
Precision One Pty Ltd
Stand 1209
1904/283 City Road
SOUTHBANK VIC 3006
Tel: 0499 100 810
www.precision1.com.au
alex.wei@precision1.com.au
Contact: Alex Wei
Precision One is a subsidiary company of Thermoway Industrial Ltd Taiwan. We 
specialise in manufacturing thermocouple equipment and heaters. We also distribute 
leading industry brands including Omega, Inor, TYCO, Johnson Metthey and more. 
Our customers are spread across various industries including steel, power generation, 
oil and chemical, food and other SME manufacturers. We can develop and customise 
products to suit your needs.
Pressure and Safety Systems
Stand 1107
PO Box 470 
SOUTH MELBOURNE VIC 3205
Tel: 03 9699 7355 Fax: 03 9696 2956
www.pressureandsafetysystems.com.au
valves@pressureandsafetysystems.com.au
Contacts: Derik Thomas, Malcolm Reeve, Shane Steer
Pressure and Safety Systems was established in the mid 1960’s and grown to 
represent a well respected group of international manufacturers. As national 
distributors for these German, British and US companies we stock, set, certify and 
service their ranges of safety and relief valves. From German - Ari, Goetze, Niezgodka 
and Ritag, from England - Seetru and the USA - Mercer. Additionally the company 
supplies rupture discs and explosion vents from British manufacturer Elfab and liquid 
level gauges from Seetru. Products are specifi ed for air and gas compressors, on 
FPSO’s, offshore rigs, on CSG well-heads as well as for general industry and steam. 
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   71
NMW | Exhibitor Profiles
72  SYDNEY 13 – 16 MAY 2014
Pro Z 3D Solutions
Stand 1539
Unit 1, 22–24 Norman Street
PEAKHURST NSW 2210
Tel: 02 9045 3525 Fax: 02 8088 3864
www.proz3d.com.au
solutions@proz3d.com.au
Contacts: Shane Rolton, Ben Tam, Paul Griffiths,
Nic Modonesi, Caleb Tall
Pro Z 3D Solutions, Australian authorised 3D Systems reseller, is now offering a range 
of professional 3D printers and total 3D solutions, including 3D scanning systems and 
3D software, with a sales and engineering team that uses what we sell! At Pro Z 3D 
Solutions we invest signifi cant resources to benchmark 3D printers and scanners for 
different applications. This experience and the knowledge gained can help guide you 
on which 3D printers and 3D scanners are right for your application. The benefi ts of 3D 
printing are wide and varied: fi nd out how 3D printing is changing the world. We cut 
through the marketing hype and show you the facts.
Pronto Software Limited
Stand 1641
20 Lakeside Drive
EAST BURWOOD VIC 3151
Tel: 03 9887 7770 Fax: 03 9887 7779
www.pronto.net
erica.low@pront.net
Contacts: Peter Swart, Bruce Minty, Malcolm Martin
Pronto Software has been developing award-winning business management 
software for over 30 years. With in-built intelligence, fl exibility and an easy-to-use 
interface, its fl agship product, Pronto Xi enables users to discover rich business 
insights. Pronto believes in the power of actively listening to clients, adapting our 
product to meet their needs and fi nally revealing the best solution. It’s how we 
continually surpass client expectations, delivering moments of utter surprise and 
delight. Find your moment: www.pronto.net.
QHDC Australia Pty Ltd
Stand 1609
PO Box 2141
BURLEIGH MDC QLD 4220
Tel: 07 5593 4718 Fax: 07 5593 4323
www.qhdc.com.au
batkins@qhdc.com.au
Contacts: Roy Mann, Shane O’Connell, Daniel Mann, 
Bruce Atkins, Wayne Sully
We supply light, medium, heavy and premium heavy-duty wheels and castors from 
20kg to 7,500kg (7.5 tonne); small pneumatic and foam fi lled (puncture-free) wheels, 
tyres and tubes for hand trucks, wheel barrows, ride-ons, golf buggies, ag implements, 
non-marking tyres and wheels for mobility, hospital and rest-home equipment, hand 
trucks, platform and specialised trolleys and a wide range of shopping trolleys, baskets 
and retail equipment. QHDC imports and distributes quality brands from globally 
recognised manufacturers to customers across Australia and New Zealand. Drop in 
and speak with one of our experienced team members. QHDC Australia – we’ll keep 
you rolling!
Radius Benders Pty Ltd
Stand 2125
3 Dividend Street
MANSFIELD QLD 4122
Tel: 07 3849 8162 Fax: 07 3349 3012
www.radius.com.au
john@radius.com.au
Radius Benders will be exhibiting products from various companies: CSM tube 
bending machines, TradeMAX tapping arms, and Radius expander/reducer 
machines. We will also display our range of hand-operated tube bending 
machines. The hand bending machine is attractively priced and complements 
other equipment in every engineering shop.
Rapid Advanced Manufacturing Limited 
(R.A.M.) and S.A.F.E. Ltd
Stand 1424
PO Box 44, Drury 
AUCKLAND 2247 New Zealand
Tel: +64 9 294 8437 Fax: +64 9 294 8431
www.rapidman.com
info@safegroup.co.nz
Contacts: Barry Robinson, Warwick Downing
There are very few metal 3D machines available for commercial use in the world. 
R.A.M. operates two machines with a third on its way. This increases material choice; 
with Titanium 6Al4V the most frequently used powder due to its strength, light 
weight, and corrosion resistant properties. R.A.M. work closely with S.A.F.E Ltd, who 
specialises in customised forging, heat-treatment, metallurgy, failure-analysis, and 
materials training for failure prevention. Hot forging (plastically deforming metal) is the 
strongest and often most economical manufacturing method. Specialist products are 
forged (using 70% solar power) in many high-strength alloys including consolidated 
titanium powder, an emerging technology.
ReCoila Hose and Cord Reels 
Stand 1015
1/10 Melissa Place
KINGS PARK NSW 2759
Tel: 02 9621 8988 Fax: 02 9621 7688
www.recoila.com.au 
sales@recoila.com.au
Contacts: Nick Schwenke, Leigh Ellis
We’ve been making hose reels for over thirty-fi ve years, and our manufacturing 
wisdom, coupled with competitive pricing, knowledgeable staff and solid after-sales 
service, positions us fi rmly at the forefront of our industry. Based in Kings Park in 
Western Sydney, ReCoila has a fully-equipped production facility and a team of 
experts to ensure our reels are designed and manufactured to exacting standards. 
With a comprehensive range of hose, cord and cable reels and a custom design and 
manufacturing facility, ReCoila can supply the right reel for your individual application - 
with safety and productivity in mind.
Recruitaustralia.com 
Stand 2723
Suite 13, Level 4, 150 Albert Road 
SOUTH MELBOURNE VIC 3205 
Tel: 03 9696 6520
www.recruitaustralia.com 
edwardb@recruitaustralia.com
Contact: Edward Busuttil
Recruitaustralia.com is a recruitment business that specialises in sourcing quality 
staff such as CNC and mechanical trades engineers, technical sales representatives, 
sales engineers, management and supervisors, and offi ce administrative staff for 
the technical, engineering, manufacturing and fabrication industry. Director, Edward 
Busuttil, has a trade certifi cate in fi tting and machining and is actively involved in the 
day to day operation of the business. He is a recruitment specialist with a trade and 
engineering background plus many years’ hands-on experience in management and 
sales. With the combination of their qualifi cations and experience, the team at Recruit 
Australia will understand your industry better than most.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   73
Renishaw Oceania Pty Ltd
Stand 2439
4/81 Beach Road
SANDRINGHAM VIC 3191
Tel: 03 9521 0922 Fax: 03 9521 0932
www.renishaw.com.au
australia@renishaw.com
Contacts: Mike Brown, Greg Walter
Renishaw is a global company with core skills in measurement, motion control, 
spectroscopy and precision machining. Our products are used for applications 
as diverse as machine tool automation, coordinate measurement, additive 
manufacturing, gauging, Raman spectroscopy, machine calibration, position 
feedback, CAD/CAM dentistry, shape memory alloys, large scale surveying, 
stereotactic neurosurgery, and medical diagnostics.
Renz Australia Pty Ltd
Stand 2635
Unit H, 10–16 South Street
RYDALMERE NSW 2116
Tel: 02 8893 9493 Fax: 02 8893 9444
www.mastershred.com.au
rod.fowler@renz.com.au
Contacts: Paul Cohen, David Dunkley, Tim Killen
Renz Australia is part of the global group of subsidiaries of Renz Germany, 
established for over 100 years as a manufacturer of high-quality and reliable 
German-engineered products. At NMW 2014 we are featuring the HSM Profi pack 
shredder range which converts and recycles unwanted waste cardboard and cartons 
into practical, usable packaging material, replacing, for example, foam beads and 
bubble wrap, for a fraction of the cost. Also featured will be the Mastershred range 
of disintegrators, briquette machines and HSM shredders, balers and compactors. 
Huge savings on waste removal costs and a reduction on the impact to the 
environment are possible with this equipment.
Revolution Materials
Stand 1924
Unit 7, 37-39 Little Boundary Road 
LAVERTON NORTH VIC 3026
Tel: 03 9029 3469 Fax: 03 9314 1120
www.bio-circle.com.au
jpicot@revolutionmaterials.com.au
Bio-Circle Surface Technology’s revolutionary products eliminate many dangerous 
chemicals from the workplace. For cleaning/degreasing, lubricating, welding and 
corrosion protection, they are safer for your workers and reduce your impact on 
the environment. See the award-winning Bio-Circle parts washers, and the versatile 
Turbo, with both automatic and manual cleaning. The new Nature Boost cleaners 
are powerful solvents made from vegetable extracts, not petroleum distillates. These 
non-fl ammable, non-carcinogenic, not rated dangerous goods are powerful and 
effective cleaners that will handle the worst you can throw at them. Surfox stainless 
steel weld cleaners are fast and effective.
Risen Machinery Co Pty Ltd
Stand 2523
C1, 11–15 Moxon Road
PUNCHBOWL NSW 2196
Tel: 02 9790 8158 Fax: 02 9791 0586
www.ri-sen.com.au
risenmachinery@gmail.com
Contacts: Jimmy Si, Jacky Zhu, Shunxiang He,
Jinky Wong, William
We are a modern high-tech hydraulics manufacturer, specialising in oil coolers, heat 
exchangers, hydraulic systems and auto radiators.
Robert Bosch (Australia) Pty Ltd
Stand 1214
1555 Centre Road
CLAYTON VIC 3168
Tel: 03 9541 7860 Fax: 03 9541 7872
www.bosch-manufacturing solutions.com.au
john.croft@au.bosch.com
Contacts: John Croft, Mark Ferris, Trevor Lawson
Since 1886, the name Bosch has been synonymous with quality. We are now 
widely recognised as a world leader in technology and innovation with a breadth 
of industries and products that extend from the automotive industry, to healthcare, 
energy, power tools, household appliances and whitegoods. On average, Bosch 
applies for 19 new patents every single day for advanced and new technologies. 
Working with Bosch means accessing a global pool of resources, knowledge, 
experience and support. Within the global Bosch team, there is Bosch Australia, 
established in 1954, and within Bosch Australia, there is our Manufacturing Solutions 
division, globally recognised for its work in engineering services.
Rösler UK
Stand 2443
Unity Grove, School Lane,
Knowsley Business Park 
PRESCOT L34 9GT United Kingdom
Tel: +44 151 482 0444 Fax: +44 151 482 4400
www.rosler.com
s.banks@rosler.com
Contacts: Stephen Lewis-Brammer –General
Manager, Tony Pugh –Aerospace Manager,
Michael Williams –Technical Process Manager,
Sam Humphries –Aftermarket, Abrasives and Media
Rösler is the world’s leading surface preparation and fi nishing company. We have 
developed processes for the automated fi nishing of components manufactured 
from metal, plastic and ceramic as well as exotic materials. Whether you are looking 
to deburr, radius, degrease, descale, polish or prepare a surface for a subsequent 
coating or plating we have a process for you. Rösler is capable of developing a 
surface fi nishing process if your component is new or can revisit and improve your 
existing process to increase your part’s profi tability and value to your customers. 
Sage Business Solutions Pty Ltd
Stand 1737
Level 6, 67 Albert Avenue
CHATSWOOD NSW 2067
Tel: 02 9921 6500 Fax: 02 9921 6519
www.sagebusiness.com.au
info.pacifi c@sage.com
Contacts: Viviane Friedrich, Kate Edwards,
Paul Benson, Anthony Caston, Gareth Moore
With over six million customers, we pride ourselves on providing unequalled 
freedom of choice for the life of your business. Our ERP product family provides 
a comprehensive ERP solution for the entire mid-market and small enterprise 
manufacturing sector. Take Sage ERP X3, our global solution for larger 
manufacturers. Or consider Sage 300 ERP, previously Accpac, our business solution 
for small to midsize manufacturers.
SAI Global 
Stand 2818
286 Sussex Street
SYDNEY NSW 2000 
Tel: 1300 727 444 Fax: 02 8206 6001
www.saiglobal.com/as3-nmw14/ 
training@saiglobal.com
SAI Global is a leading Australian provider of training, audit and certifi cation 
services across different management systems and standards. As a registered 
training organisation (RTO), SAI Global provides public, in-house, online and on-demand standards and management systems training, which assist individuals and 
businesses to implement, maintain and improve management systems based on 
relevant standards. As Australia’s leading certifi cation body, SAI Global provides 
audit and certifi cation for ISO 9001 Quality, OHS, ISO 14001 Environment, Medical 
and Automotive Management Systems. We also provide product certifi cation for 
standards including building, plumbing, consumer goods, electrical equipment and 
more.
NMW | Exhibitor Profiles
74  SYDNEY 13 – 16 MAY 2014
Saint-Gobain 
Stand 1037
15 Edgars Road
THOMASTOWN VIC 3042 
Tel: 03 9358 6100
customerservice.sga-vic@saint-gobain.com
Contacts: Dan Huber, Stephen Bradley
Saint-Gobain Abrasives is the largest global abrasive supplier for bonded, coated, 
non-woven and superabrasives as well as diamond and equipment products for the 
industrial, construction, automotive repair and do-it-yourself markets. In Australia, we 
are market leaders through our Flexovit, Norton, Clipper and Bear brands. Saint-Gobain Abrasives has a manufacturing and conversion facility in Cambellfi eld, Victoria. 
This local manufacturing capability is connected to a nation-wide sales force and this 
allows us to provide exceptional customer service and product lead times.
Shanghai Hishine Machinery Co Ltd
Stand 2110-01
Room 608, 28 Xuanhua Road 
SHANGHAI SH 200050 China
Tel: +86 21 6 1639777 Fax: +86 21 6 1639779
www.hishine.com
frank@hishine.com
We supply full range equipment for steel plate treatment: from sandblasting, cutting, 
bending, straightening, pipe pre-fabrication, etc.. With the innovative designing, 
increasing the effi ciency and save your operation cost. Own one of the strongest 
machining workshop - for ultra large/heavy pieces machining with extremely high 
precision request.
Shanghai Ribo Industry Co Ltd
Stand 2110-03
Room 503 Tonghua Building 
345 Jinxiang Road New Pudong 
SHANGHAI SH 201206 China
Tel: +86 21 51386336 Fax: +86 21 39650050
www.riboindustry.com
john@reliablechina.cn
Our company Ribo has our own manufacturing plants in Yangzhou in Jiangsu province 
China. Now we have 100 workers and 15 engineers in our plants. We have a sales 
offi ce in Shanghai. We have about 100 kinds of different equipment, including quality 
checking equipment, machining centres, punching and pressing machines with 
max.1600MT, numerically controlled lathes and production lines of gears, sprockets 
casting and forging production lines and the aluminum injection machines. We have 
passed the ISO9001. Main products: transmission parts (gears & sprockets) pulleys, 
shafts chains, steel and cast iron casting parts, CNC machining parts, forging and 
stamping parts, aluminum parts.
Shanghai Sanyu Industry Co Ltd
Stand 2110-04
Room 723, 800 Shangcheng Road, New Pudong
SHANGHAI SH 200120 China
Tel: +86 21 6504 6976 Fax: +86 21 5168 6158
www.sanyuacdrive.com
alansunrise@sina.com
Shanghai Sanyu Industry Co Ltd was founded in 2000, with parent company Japan 
Sanyu Corporation (Asia). We are a leading manufacturer of AC drives, automation 
products and inverter welding machines in Shanghai, China.
Shanghai Yasun Metal Products Co Ltd
Stand 1605-02
5951-1 Puwei Road, Fengxian 
SHANGHAI SH 201417 China
Tel: +86 21 5755 9270 Fax: +86 21 57559271/8030
www.shyasun.com
diana@shyasun.com
Contacts: Diana Wang, Halley Hua
Shanghai Yasun Metal Products Co Ltd is a professional manufacturer and exporter 
that is concerned with design, development and production of logistics and storage 
equipment, including light duty shelving, medium duty rack, heavy duty pallet rack, 
drive-in rack, push-back rack, live roller rack, fl ow rack, cantilever rack, cable rack, 
mezzanine and steel platform. We also supply steel pallet, wire mesh, wire container, 
hand pallet truck, work table, logistics trolley etc.. We are located in Shanghai Fengxian 
District, with convenient access to transportation. All of our products comply with 
international quality standards and are greatly appreciated in various markets around 
the world.
Shanxi Guangyu LED Lighting Co Ltd
Stand 1730-01
Room C305, Huajie Building, No.13, Dazhongsi
HAIDIAN BJ 100098 China
Tel: +86 10 62153917 Fax: +86 10 62153948
www.gyledlighting.com
sales@gyledlight.com
Contacts: Ada Lee, Colorado Chen, Hurace Huang
Shanxi Guangyu LED Lighting Co Ltd, located in Linfen City, Shanxi Province, takes up 
around 300,000 square metres with more than 2000 employees, 58 million registered 
capitals. After decades of innovation and exploration by Guangyu people, Guangyu 
has developed into a professional high-tech corporation since its early beginnings in 
the LED lighting industry. We focus on the integration of R&D, design, manufacture, 
and marketing of high-power LED light sources, LED commercial lighting, LED street 
lighting, LED outdoor lighting, and LED tunnel lighting.
Sheffield Blades
Stand 1345
PO Box 687
KOTARA NSW 2289
Tel: 02 4957 8787 Fax: 02 4957 3737
www.sterlingtools.com.au
sales@sheffieldblades.com.au
Sheffi eld Blades is a dynamic team that thrives on ‘giving you more’. We promote the 
outstanding Sterling and Alpha brands of cutting tools and power tool accessories 
that guarantee professionals more value in every single product. The Sterling range 
provides complete cutting tool solutions in utility knives, blades, safety cutting, tape 
measures and related tools. The Alpha range provides drill bits, driver bits, taps and 
dies, countersinks, hole saws, and related power tool accessories. We have recently 
launched the Maxabrase range of abrasive products, including cutting discs, fl ap discs, 
fl ap wheels and fi bre discs. Our promise of ‘giving you more’ is embodied in every 
product.
SigmaTEK Asia Pacific
Stand 1546
1048 Beaudesert Road
COOPERS PLAINS QLD 4108
Tel: 07 3246 5213 Fax: 07 3246 5212
www.sigmanest.com
johns@sigmanest.com
Contacts: John Salisbury, John Werchon, Neill Kapp, 
Mahesh Aluthge, Joe Keblesh
SigmaNEST®, ‘the ultimate nesting system’, is a CNC programming system for 
laser, plasma, waterjet, oxyfuel, routers, turret punch, knife cutters, tube cutting and 
profi le punch combination machines. It defi nes state-of-the-art in material processing. 
Developed for the specifi c requirements of the fabrication industry, SigmaMRP™ is 
a manufacturing resource planning (MRP) system that manages transactions and 
communication with customers and suppliers, inventory of goods and raw materials, 
along with departmental and outsourced processes. For more information on 
SigmaTEK, SigmaNEST, SigmaMRP, and the company’s other products and services, 
visit Stand 1546.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   75
NMW | Exhibitor Profiles
76  SYDNEY 13 – 16 MAY 2014
SLM Solutions GmbH
Stand 1424 
www.slm.com
SLM Solutions GmbH in Lubeck-Germany is a leading manufacturer of selective laser 
melting equipment for metals and vacuum casting equipment for polyurethanes. SLM 
Solutions also produces and sells bismuth based low melting metal alloys and various 
consumables as well as metal powders for selective laser melting processes. Latest 
innovation is the SLM500HL providing a build chamber of 500 x 280 x 325mm and a 
unique double beam technology. Each of the two fi bre lasers (400/1000W) operate on 
the powder bed by a 3D scanning unit, whereas two laser beam profi les are working at 
the same time. For more information please visit our website under www.slm-solutions.
com.
Smenco Pty Ltd
Stand 1137
1 Longview Court
THOMASTOWN VIC 3074
Tel: 03 9466 4060 Fax: 03 9464 2106
www.smenco.com.au
sales@smenco.com.au
Contacts: Anthony England, Brent Ward, Brian 
Newson, Russell Croft
Smenco is launching the long awaited Fronius TPS/i welding platform along with a 
number of other new products from Fronius. Completely redeveloped from the ground 
up, Fronius International has created a state-of-the-art MIG/MAG welding platform with 
the perfect ARC. The TPS/i utilises a large robust touch-screen that is easy to navigate 
for fi rst time users as well as experienced operators. No more bulky T-bar push-pull 
torches, the new Fronius in-line push-pull is not much larger than a standard hand 
torch and has been drop tested from fi ve metres on to concrete without failure.
Spitwater 
Stand 2919
130 Gipps Road 
SMITHFIELD NSW 2164 
Tel: 1300 880 403 Fax: 02 9725 2631
www.spitwater.com.au 
milo@spitwaternsw.com.au
Contacts: Joe Galea, Milo Gajin, Paul Seward
Spitwater is the only true Australian manufacturer of commercial and industrial high-pressure water cleaners as well as industrial LPG and diesel heaters. The Spitwater 
high-pressure water cleaner range includes electric, petrol and diesel engine powered 
models in cold, as well as hot/cold water versions. The LPG heater range is AGA 
approved and offers unsurpassed safety features. Spitwater also distributes a complete 
range of commercial and industrial vacuum cleaners and scrubbers used in a variety of 
cleaning applications. Spitwater products are preferred by the professional commercial 
cleaning industry. Spitwater has branches in Brisbane, Sydney, Melbourne and 
Adelaide with dealers in all major centres throughout Australia. Spitwater celebrated its 
30th anniversary in 2013.
Staetite Fasteners
Stand 2438
53–55 Sheehan Road
HEIDELBERG WEST VIC 3081
Tel: 03 9455 0500 Fax: 03 9455 0600
www.staetitefasteners.com
akoukouras@staetite.com
Contacts: Athena Koukouras, Roger Bates,
James Tacey, Matthew Cervelli
We are proudly privately Australian-owned and Australia’s largest manufacturer of cold 
forged components, certifi ed to ISO/TS16949, servicing a range of industries from 
automotive, transport, mining, building, manufacturing, and agricultural through to 
general hardware and industrial supplies. We can custom make products to a variety 
of specifi cations, in a range of materials and surface fi nishes. Our in-house capabilities 
include: tool manufacture and design, forging, rolling, sems assembly, vision sorting 
and heat treatment. Our capabilities are further complemented through licensed 
products such as MAThread and our agency line, Pratley DIY and industrial adhesives.
Stanley Black & Decker
Stand 1015
82 Taryn Drive 
EPPING VIC 3076
Tel: 0411 649 011 Fax: 1800 080 898
www.stanleyblackanddecker.com
bryce.hill@sbdinc.com
Contacts: Bryce Hill, Kosta Condos
Stanley Black & Decker is a leading global supplier of hand tools and power tools 
to all segments of the industrial, manufacturing, construction, mining and energy, 
aerospace and automotive industries via an extensive network of trade partners such 
as Blackwoods. Here in Australia, Sidchrome, DEWALT and Stanley Hand Tools are 
industry recognised brands that represent a quality and value proposition second to 
none. As the Australian Industrial and Manufacturing segment evolves, this truly global 
link gives Stanley Black & Decker Australia access to a wide range of products from 
other markets around the world that are able to sourced and supplied through our retail 
partners to provide solutions for any needs that may arise.
Star Business Solutions 
Stand 1738
Unit 10, 663 Victoria Street 
ABBOTSFORD VIC 3067 
Tel: 03 8415 8315 Fax: 03 8415 8333
www.starbusinesssolutions.com.au 
norman.hall@star.cd
Contacts: Greg Jones, Norman Hall
Star Business Solutions is a market-leading provider of business management and 
accounting software solutions. These include ERP, CRM, payroll, human resource, 
fi nancials and fully integrated business systems. We are able to offer solutions across 
the board, from the small organisation needing basic functionality to the medium or 
large organisation.
Storemasta Products Australia
Stand 1015
21 Devon Street
BURNIE TAS 7320
Tel: 03 6430 3400 Fax: 03 6431 4500
www.storemasta.com.au 
sales@storemasta.com.au
Contacts: Charles Humber, David Urquhart,
Michael Penhall 
There are many different types of dangerous goods and all have specifi c storage 
requirements. Storemasta Products Australia specialises in consulting, design and 
manufacture of tailored solutions to provide full compliance and improve operational 
effi ciencies in every situation. Compliance is a pertinent consideration when it comes to 
storage of your dangerous goods, and there are many substances that can cause severe 
injury or death if strict handling and storage procedures are not adhered to correctly.
Stratasys
Stand 1437
One Raffles Quay 
SINGAPORE 0485583 Singapore
Tel: +852 3944 8822 
www.stratasys.com
alex.hodik@stratasys.com
Contact: Alex Hodik
Stratasys Ltd (Nasdaq: SSYS), headquartered in Minneapolis, Minnesota, 
and Rehovot, Israel, manufactures 3D printers and materials for prototyping 
and production. The company’s patented FDM® and PolyJet™ 3D printing 
technologies produce prototypes and manufactured goods directly from 3D CAD 
fi les or other 3D content. Systems include 3D printers for idea development, 
prototyping and direct digital manufacturing. Stratasys subsidiaries include 
MakerBot and Solidscape, and the company operates the RedEye digital-manufacturing service. Stratasys has more than 1700 employees, holds over 500 
granted or pending additive manufacturing patents globally, and has received 
more than 20 awards for its technology and leadership.
Online at: www.stratasys.com or blog.stratasys.com.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   77
NMW | Exhibitor Profiles
78  SYDNEY 13 – 16 MAY 2014
Sun Industries 
Stand 1724
33 Guthrie Street 
OSBORNE PARK WA 6017 
Tel: 08 9244 2200 Fax: 08 9244 3470
www.sunindustries.com.au 
gavin@sunindustries.com.au
Contacts: Gavin Parker, John Stoneham
Sun Industries has led the market for over 60 years in design, printing and manufacture 
of products used to identify, control, communicate, direct, brand and move. We 
provide a full range of polyester, polycarbonate, silicone keypads and metal plates 
that control and communicate information for our clients’ equipment. Our membrane 
switches, graphic decals, facias and overlays are supplied using genuine GE Lexan 
polycarbonate and Autotype and Tekra polyesters. We incorporate the full range of 
3M adhesives depending on your special needs. Other services we provide include: 
nameplates; serial numbering and barcoding; laser etching; gaskets and seals; large 
format signage; thin foil; dedicated label kits; and full variable data options.
Call us on 1800 999 418 or email sales@sunindustries.com.au.
Sunlec International Pty Ltd
Stand 1637
31 Port Pirie Street
BIBRA LAKE WA 6163
Tel: 08 9434 1933 Fax:08 9434 4158
www.sunlec.com.au
expos@sunlec.com.au
Sunlec International is the trusted, quality-endorsed source for wire marking and 
cable marking systems. From automated marking printers to Grafoplast® manual 
marking kits and consumables, Sunlec has provided effi cient ways to mark for 
two decades and continues to develop products to take us into decades to 
come. Sunlec offers free next day delivery.
Supagas
Stand 1239
5 Benson Road
INGLEBURN NSW 2565
Tel: 02 8788 4444 Fax: 02 8788 4445
www.supagas.net.au
marymansour@supagas.net.au
Supagas is a renowned 100% Australian owned and operated company and has been 
providing gas services since 1997 to New South Wales, Queensland and now the 
Australian Capital Territory. Supagas now has an extensive range of gases, including: 
domestic gas; Heatagas™; helium; hospitality gas; industrial gas; LPG; specialty gas; 
and welding gas. Supagas’ state-of-the-art facilities allow us to offer multiple gas 
types, gas products, as well as run specialised laboratories to mix and test specialty 
gas. This helps us to better service our customers. Supagas is able to provide fast 
and reliable service as well as free delivery to ensure quality service every time, so that 
whenever you need gas, Supagas is there.
Super Master Developing Co Ltd
Stand 1315-05
5F, 8 Sin Ming Road, Lane 298
TAIPEI 114 Taiwan
Tel: +886 2279 5969 Fax: +886 4 2359 4420
www.supermaster.com.tw
info@supermaster.com.tw
Contacts: Raymond Chang
Super Master, A leading hand-tool specialist, always tries to develop innovative 
products such as hand tools, torque wrench, air tools, air impact wrench, air sander, 
air polisher, air grinder, sanding pads, sanding drum, abrasives and others.
Superior Lubricants
Stand 2249
10/22 Oramzi Road
GIRRAWEEN NSW 2145
Tel: 02 9636 9399 Fax: 02 9636 9988
www.superiorlubricants.com.au
sales@superiorlube.com.au
Contacts: Aaron Crichton, Ian Neilson
Superior Lubricants will be introducing a high performance range of industrial 
and specialty lubricants designed to reduce wear, extend equipment life, increase 
production and lower your operational costs.
Sutton Tools Pty Ltd
Stand 2734
378 Settlement Road
THOMASTOWN VIC 3074
Tel: 03 9280 0800 Fax: 03 9464 0015
www.sutton.com.au
cservice@sutton.com.au
Contacts: Stephen Dwyer, Stacey Karberis,
Michael Bromhead, Peter Sutherland, Natalie Schembri
Sutton Tools is a 100% Australian family-owned company and Australia’s only 
production manufacture specialist and supplier of globally competitive, quality cutting 
tools. Sutton Tools produces drills, taps, endmills and countersinks to service tools and 
die, aerospace, automotive, marine and general engineering industries in the Australian 
and overseas markets. Sutton Tools has extended its cutting tool portfolio with a full 
range of Ceratizit carbide inserts and holders, and is now able to offer a complete 
range of cutting tools and services including: high performance carbide drills, taps 
and endmills, carbide inserts, specials manufacture, regrinding/recoating and heat 
treatment services.
Syspro Australia Pty Ltd
Stand 1543
Suite 1102, Level 11, 201 Miller Street 
NORTH SYDNEY NSW 2060 
Tel: 02 9870 5555 Fax: 02 9929 9900
www.syspro.com 
anne.teng@sg.syspro.com
Contacts: Herbert Kersten, Maurice Rodrigues,
Rick Owen, Shaun Butler
Syspro software is an award-winning, best-of-breed enterprise resource planning 
(ERP) software solution for cost-effective on-premise and cloud-based utilisation. 
Industry analysts rank Syspro software among the fi nest, best-in-class enterprise-resource planning solutions in the world. Syspro software’s powerful features, 
simplicity of use, scalability, information visibility, analytic/reporting capabilities, 
business process and rapid deployment methodology are unmatched in its 
sector. Syspro, formed in 1978, has earned the trust of more than 15,000 
companies globally. Syspro’s ability to grow with its customers and its adherence 
to developing technology based on the needs of customers is why SYSPRO 
enjoys one of the highest customer retention rates in the industry.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   79
TAITRA (Taiwan External Trade Development 
Council)
Stand 1315-06
5F, 333 Keelung Road, Section 1
TAIPEI 11012 Taiwan
Tel: +886 2 272 5520 
www.taiwantrade.com.tw
taitra@taitra.org.tw
TAITRA is the foremost non-profi t trade and investment promotion organisation 
founded in 1970 to help promote foreign trade. Since its establishment, TAITRA has 
developed a well-coordinated trade promotion and information network composed of 
over 1,200 trained specialists stationed at its headquarter in Taipei, four local branch 
offi ces, as well as in over 50 representative offi ces around the world. TAITRA’s major 
functions include market development, strategic marketing, trade information services, 
exhibition, convention services, trade education and TaiwanTrade (an e-trading hub 
service). Tremendous business opportunities can be found in Taiwan. TAITRA is ready 
to help you do business with Taiwan.
TEA Transmissions Australia Pty Ltd
Stand 1215
Tahiti Road
TIARO QLD 4650
Tel: 07 4129 2533 Fax: 07 4129 2437
www.tea.net.au
nadia@tea.net.au
TEA Transmissions is part of a worldwide group, established in Germany in 
1964 and expanding to many countries including Australia in 1986. TEA stocks 
a huge range of special-purpose engineering products and proudly represents 
a vast range of worldwide manufacturers including; Winkel, HepcoMotion, 
BishopWisecarver, ZIMM, Ketterer, Hiwin, Huco, and Chambrelan. Our range 
includes: actuators, ball screw, bearings, protective bellows, couplings, cam 
followers, guide wheels, load runners, linear slide systems, motors, gearboxes, 
knobs and handles, machine feet, vibration dampers, titanium rod, precision round 
bar, spur gears and racks, bevel and worm gears, screw jacks, universal joints, 
telescopic slides, and work lamps.
Visit our website to fi nd your engineering solution.
Techflex Australia
Stand 1726
Unit 2, 8 Blackfriar Place 
WETHERILL PARK NSW 2164
Tel: 1300 762 445 Fax: 1300 383 835 
www.techflex.com.au
sales@techflex.com.au
Contacts: Nicholas Mangraviti, Roger Mangraviti,
Joe Mangraviti
Techfl ex Australia is all about braided expandable sleeving products. Techfl ex Australia 
has been operating since 1994; we have our main distribution centre in Sydney’s 
Western Suburbs. We supply our products throughout Australia, New Zealand and the 
Asia Pacifi c region. We are an OEM supplier to many industries including automotive, 
aviation, electrical, engineering, marine, military, mining, motorsport and transport, and 
telecommunication. The industry arena keeps expanding in using Techfl ex braided 
sleeving products.
TECHNI Waterjet Pty Ltd
Stand 1825
47 Barry Road
CAMPBELLFIELD VIC 3061
Tel: 03 9357 8360 Fax: 03 9357 0446
www.techniwaterjet.com
paul@techniwaterjet.com
Contact: Joe Petruccelli
TECHNI Waterjet is one of the world’s leading manufacturers of profi le water jet cutting 
systems with over 500 installations worldwide, specialising in design, development 
and installation of complete water jet cutting solutions suitable for cutting any material. 
TheTechjet-X3 ‘premium’ range of water jet cutters offers the highest quality and 
accuracy of water jet machines available today (accuracy 0.01mm). Quantum electric 
servo pumps (Quantum ESP) are in-house developed high-pressure pumps that 
replace hydraulics with electric power, resulting in lower operating costs.
Technical Forgings NZ Ltd
Stand 2608
4 Bancroft Crescent
GLEN DENE Auckland 0602 New Zealand
Tel: +64 9 813 3270 Fax: +64 9 813 3271
www.technicalforgings.com
brenton@techforge.co.nz
Contacts: Brenton Lee, Karolina Bratek
Technical Forgings is a specialised nonferrous forged component manufacturer that 
has 25 years of experience in the demanding quality component market. We supply 
components of various levels of complexity in aluminium alloys, titanium, brass alloys 
and copper to international standards. We are AS/NZ ISO 9001-2008 registered and 
measure our performance utilising DIFOTIS, delivered in full on time in specifi cation. We 
can provide order volumes from 100 units and welcome you to visit our stand 2608.
TechRentals
Stand 1212
18 Joseph Street
BLACKBURN NORTH VIC 3130
Tel: 1800 632 652 Fax: 03 9896 3099
www.techrentals.com.au
rent@techrentals.com.au
Contacts: Gerard Pearson, Ben Baker, George Harper
TechRentals is an industry leader in specialised test and measurement equipment with 
over 40 years of experience. Our team is highly qualifi ed and experienced with industry 
recognised technical qualifi cations. Our services are available for technical application 
issues including consultation on major testing requirements or particularly challenging 
scenarios. This may also include on-site support during the testing phase or assistance 
with interpreting results. Our equipment covers a broad range of testing areas including 
data and telecommunications, construction, building services, surveying, radio 
frequency, electrical power, electronics, environmental, OH&S, chemical & laboratory, 
general industrial, physical measurement and more.
Techspan Australia Pty Ltd
Stand 1842
PO Box 1012
MASCOT NSW 1460
Tel: 1800 148 791 Fax: 1800 148 799
www.techspan.com.au 
tim@techspanonline.com
Techspan supplies high-quality, high-technology plant and machinery to the 
manufacturing and service industries. Our fi ve core product lines are: plastics 
machinery, ultrasonic/lab equipment, industrial printing systems, plastic 
welding tools, and process heating equipment. Visit our new mobile interactive 
e-commerce website for further information.
Save time, buy online at www.techspan.com.au or contact our Australian offi ce 
on 1800 148 791. New Zealand offi ce contact details are: 0800 603 603 info@
techspanonline.com.
NMW | Exhibitor Profiles
80  SYDNEY 13 – 16 MAY 2014
Tecweigh Pty Ltd 
Stand 1206
Factory 3, Silkwood Business Park
7 Lakewood Boulevard 
CARRUM DOWNS VIC 3201 
Tel: 03 9775 0266 Fax: 03 9775 0966
www.tecweigh.com.au 
barryg@tecweigh.com.au
Contacts: Barry Gamble, Paul Brockhus,
Peter MacHugh
Specialising in feeding and metering, Tecweigh is a leading designer and manufacturer 
of in motion weighing and volumetric metering products for the dairy, food, chemical, 
pharmaceutical, and plastics industries. Their rugged design also sees the scales in 
use in mining and quarry applications. Products include conveyer belt scales, weigh 
belt feeders, loss in weight feeders and volumetric feeders. Tecweigh products are 
designed and made in Australia.
Tenanic Industrial Co Ltd
Stand 1415-01 
10F-3, 2 Jian 8th Road, Zhonghe 
NEW TAIPEI 23511 Taiwan
Tel: +886 2 8226 1255/8 Fax: +886 2 8226 1259
www.tenanic.com
tenanic@seed.net.tw
Contacts: Peter Liaw, Allen Liaw, Mark Newman
We carry large analogue input numeral display; large digital input numeral display; 
production line management display; time management display and SCADA 
application develop.
Tengzhou Tri-Union Machinery
Stand 2100-01
318 South Yikang Road, Tengzhou
ZAOZHUANG SD 277500 China
Tel: +86 632 595 8067 Fax: +86 632 595 8089
www.ttmc.cn
info@ttmc.cn
Contacts: Aileen Ke, Emily Shi, Gavin Chu
As one of the leading manafacturers, we Tengzhou Tri-union Machinery Co Ltd (TTMC) 
own six factories (around 320, 000sqm workshops) and 980 skilled staffs (including 
160 senior engineers and managers) can provide you more than 600 different types 
of quality products with CE standard in volume. Our main products lines are: CNC 
machine tools; precision metal cutting band saw; precision sheet metalworking 
machines such as shearing machines, bending machines, rolling machines and other 
forming machines; drilling & milling machine; wood working machine such as planer & 
thicknesser, slot boring machine; garage equipments such as english wheel, cylinder 
boring machine etc..
TeSuCo
Stand 1331
PO Box 7096
SILVERWATER BC NSW 1811
Tel: 02 9737 9937 Fax: 02 9647 1269
www.tesuco.com.au
sales@tesuco.com.au
Contacts: Wayne Morris, Mark Stadtmiller,
Jonathan Sage, Peter Hobbs, Vlad Davidovic
Established in 1988 and Australian owned, TeSuCo designs, manufactures and 
imports a wide range of gas equipment for various industries. The range includes 
regulators, manifold equipment, gas welding, cutting, heating and gouging equipment, 
fl ashback arrestors, quick-action couplings, disposable gas cylinders, leak detection 
spray and burn relief. TeSuCo will display: the ever popular Oxyturbo portable brazing 
set that uses disposable gas cylinders and weighs just 6kg assembled; disposable gas 
cylinders for electric welding; heat sink CO2 welding gas regulators that deliver high 
fl ow without freezing; one-piece cutting torches, to cut 300mm; and Gas Control, a 
new leak detection spray.
The Lincoln Electric Company
Stand 1037, 1231 & Demo F
35 Bryant Street
PADSTOW NSW 2211
Tel: 1300 728 720 Fax: 02 9792 2420
www.lincolnelectric.com.au
glenn.isaacs@lincolnelectric.com.au
Contacts: Paul Howe, Paul Smith, Alan Mascord, 
Michell Dinham, CK Thothathri
The Lincoln Electric Company is the world’s largest supplier of welding equipment 
and consumables, servicing home DIY through to industries as diverse as fabrication, 
mining, construction and oil & gas. Lincoln Electric also has the largest R&D facilities 
dedicated to the advancement of welding technology. Lincoln Electric – the welding 
experts.
The LS Starrett Company of Australia
Stand 2549
Unit 2, 57 Prince William Drive
SEVEN HILLS NSW 2147
Tel: 02 9620 6944 Fax: 02 9620 6988
www.starrett.com.au
info@starrett.com.au
Contacts: David Eldridge, Steve Robinson,
Peter Lowrie
The LS Starrett Company of Australia will be displaying horizontal and vertical optical 
comparators, both manual and CNC vision measurement systems, the new HDV300 
vision-based comparator and force measurement systems. We will also be displaying 
the latest products from our extensive range of precision measuring equipment as well 
as the latest developments in our cutting tool product range.
Tianjin Master Storage Facilities Co Ltd
Stand 1605-01
Wuqing Development Zone
WUQING TJ 301700 China
Tel: +86 22 26988008-8032 Fax: +86 22 26988009
www.racking.com.cn
master@racking.com.cn 
Contacts: Chen De Hai, Ren Zhi Ying, Chen Yi Wen
Established in 2001, Tianjin Master Storage Facilities Co Ltd is a professional 
company engaged in design, production and installation of logistic equipment and 
providing logistic planning, and has grown into an industry-leading logistic equipment 
manufacturer in Northern China after one decade’s development. Our company has 
achieved ISO9001 Quality Certifi cation and CE Certifi cation. The trademark ‘Master 
Racking’ of our company has been approved by the State Trademark Bureau. Our 
products include: pallet racking, pallet shuttle racking system, pallet shuttle, drive-in 
racking, mezzanine, platform, long span racking, cantilever racking, and some other 
storage facilities. 
Tianli Machine
Stand 2100-05
Diankou Town, Zhuji
SHAOXING ZJ 311800 China
Tel: +86 136 7 6876859 Fax: +86 575 8 7066187
www.hf-tl.com
tianlong.wang@vip.163.com
Contacts: Jie Wang, Tianlong Wang 
Hydraulic hose fi tting, hydraulic ferrule, hydraulic adapters and all kinds of auto parts, 
nylon grease gun hose (3000PSI-8000PSI working pressure), rubber grease gun hose 
(5000PSI working pressure), hydraulic hose, and tefl on hose are ours main products.
Tianli sticks to integrity-based, best quality. We will satisfy our customers with better 
quality and service for a better future. The demand of customers is our purpose.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   81
TIME Group Inc
Stand 1404
28 Shangdi West Road, Haidian District 
BEIJING BJ 100085 China
Tel: +86 10 6298 0816 Fax: +86 10 6298 5475
www.timegroup.com.cn
niyan@timegroup.com.cn
TIME Group Inc, established in 1984, is a leading manufacturer of material testing 
machines and portable test instruments in China. We have over 2,800 dedicated, 
highly skilled employees. In 1995, we achieved ISO 9001 accreditation. We are not only 
famous in China, but also have been exporting to more than 32 overseas countries and 
regions.
TIPTOP Industrial Development Co Ltd
Stand 1141-04
6F The Main Building
Science and Technology Innovation Park
Xixiang street Bao’an 
SHENZHEN GD 518101 China
Tel: +86 755 2730 8163 Fax: +86 755 2744 7410
sales@tiptop.gd
Contacts: Ling Chen, Winnie Yan
TIPTOP was founded in 2001, headquartered in Hong Kong. The industrial parks 
are located in Guizhou and Shenzhen which is 30 kilometres away from Hong Kong. 
TIPTOP is concerned with designing, researching and developing, manufacturing, 
selling and after-sale service. It’s also a leading manufacturer in providing 3D welding 
fl exible modular fi xture system and toggle clamp. The company has successfully 
passed the ISO international quality system certifi cation and certifi ed by TUV (Technical 
Supervision Association in Germany). Many products have patent rights and are taken 
as high-tech products, which reach the highest level in international industrial fi eld.
TMN Simulation
Stand 1547
PO Box 417
ST KILDA VIC 3182
Tel: 03 9005 7234 
www.tmn.com.au
sales@tmn.com.au
Contacts: Kenny Macleod, Jo Thyer
Ever wondered if you could improve your processes or scheduling but don’t have 
time or resources to try out your plans? Then perhaps you need a simulation model 
of your factory or plant. Computer-based simulations are functional scaled models of 
your operations. You can test, compare and visualise your plans, long before you need 
to take it to the shop fl oor. Communication is 80% visual—and 3D visualisation and 
statistically accurate proof help stakeholders visualise and understand all the issues. 
Speak to TMN Simulation to see how simulation might help you improve the way you 
do things.
Torema Engineering Pty Ltd
Stand 1525
12–14 Helium Street
NARANGBA QLD 4504
Tel: 07 3888 2122 Fax: 07 3888 1432
torema.com.au
philip.murphy@torema.com.au
Contacts: Philip Murphy, Rob Marschner, Tiffany Klaus, 
Dean, Kevin
Torema Engineering is a specialist in manufacturing and engineering services, 
connecting engineered products with manufacturing solutions. We work with clients to 
manufacture, evolve and deliver products . We are an international organisation with 
proven global connections and production facilities in China and Australia.
Trend Marking Systems
Stand 1405
PO Box 1311
CASTLE HILL NSW 2154
Tel: 02 9629 9535 Fax: 02 9629 7535
www.trendmarking.com.au
trend@trendmarking.com.au
Trend Marking Systems will showcase a range of identifi cation systems and 
demonstrate two exciting new systems into the Australian market. New to Australia, 
and to be offi cially released at the show, will be the Flexmark Combo machine, a 
pinmarking system which can convert from handheld for portable engraving of large 
products to bench model literally in seconds, allowing small parts like nameplates 
to be marked easily. Also to be released at the show will be the new handheld inkjet 
graphic system, capable of marking logos, text and barcodes on a variety of materials. 
Trend will also show and demonstrate the tried-and-tested metal etching systems and 
discuss other marking technologies available, such as the Hot QuickCoder contact 
marking system or the Evolution inline inkjet coders.
Treotham Automation Pty Ltd
Stand 1219
14 Sydenham Road
BROOKVALE NSW 2100
Tel: 02 9907 1788 Fax: 02 9907 1778
www.treotham.com.au
john@treotham.com.au
Treotham Automation, a leading supplier of high-quality components, products and 
solutions to industrial markets. Treotham’s customers gain from our local presence 
and extensive knowledge, from our core competence as importer and distributor 
of single components right though to detailed design and manufacture and 
commissioning of projects. Some of our exclusive products include Ilme multipole 
connectors; Amphenol Socapex connectors; Helukabel specialist cables; PMA 
fl exible conduit systems; Igus energy chains; Igus polymer bearings; Igus Chainfl ex 
continuous fl ex cables; Powerline single-pole high-current connectors; Euchner 
safety switches; Wieland safety relays; and Hummel cable glands.
Trilogiq Australia Pty Ltd
Stand 1718
15/209 Liverpool Road
KILSYTH VIC 3137
Tel: 03 9728 6500 Fax: 03 9728 6511
graphit.trilogiq.com
sales@trilogiqaust.com.au
Contact: Gary Kennedy
Trilogiq, a global leader in fl exible logistics solutions (material handling) to implement 
lean manufacturing, will release at NMW a groundbreaking technological innovation that 
results from two years of research. An innovative range of tubes, joints, connections, 
to build anything you can imagine, with more lightness, customisation, durability, ease 
of assembly, and ease of use than any other proposal on the market, will be proposed 
under the GRAPHIT® brand and will extend the well-known benefi ts of modularity of 
Trilogiq material handling solutions beyond their current scope.
Trio Packaging Systems
Stand 1813
42/5 Anella Avenue
CASTLE HILL NSW 2154
Tel: 02 9894 8777 Fax: 02 9894 8333
www.triopackaging.com.au
christine@triopackaging.com.au
Contacts: Chris Smith, Joshua Ford
Revolutionising both hand-strapping and wrapping of pallets are two new machines 
to the Australian market. First is the Ergopack mobile pallet-strapping machine, 
eliminating the need to bend when hand strapping a pallet and, being mobile, the 
machine comes to the pallet. The second, the Trio mobile wrapper, is the latest from 
Europe and has only been available for a few months. It eliminates the back-breaking 
task of hand-wrapping pallets and, because of the 200% stretch capability, will save 
$$$$ in plastic hand-fi lm costs.
NMW | Exhibitor Profiles
82  SYDNEY 13 – 16 MAY 2014
Trotec Laser 
Stand 1928
2/40 Dunn Road 
SMEATON GRANGE NSW 256
Tel: 1800 647 499 Fax: 02 4647 9677
www.troteclaser.com.au 
info@troteclaser.com.au
Contacts: Brendon Ackroyd, Cory Bourne,
John Diamond-Coorey
Trotec Laser is a world leading manufacturer of laser engraving, cutting and marking 
machines selling over 3000 machines annually. Our lasers are Austrian designed and 
built and we are the only manufacturer supplier in Australia. We offer the world’s largest 
and most advanced laser machines ranging from desktop lasers through to industrial 
machines, the lowest overall cost of ownership and a world leading warranty of up to 
10 years. In addition, we also offer unlimited technical support and free training to our 
laser customers at any of our training and development centres located in Sydney, 
Brisbane, Melbourne, Adelaide and Perth.
TXM–Total Excellence in Manufacturing
Stand 2422
Level 9, Avaya House, 123 Epping Road
NORTH RYDE NSW 2113
Tel: 02 8985 7393
www.txm.com.au
info@txm.com.au
Contacts: Tim McLean, Roger Crothers, Ron Spiteri
TXM is Australia’s leading lean manufacturing consulting business. TXM enabled over 
100 manufacturers across Australia in a diverse range of industries to improve their 
competitiveness and productivity and to grow in today’s competitive environment. The 
TXM teams bring a wealth of practical manufacturing experience to your business as 
well as a deep understanding of lean manufacturing principles. Our team members 
see themselves as manufacturing people fi rst, consultants second. This means we can 
get to grips with the issues in your business quickly and work with your team to deliver 
practical solution. As a result, we have an unparalleled record of delivering lasting 
improvement.
Tyrolit
Stand 1246 & Demo E
63 Quantum Close
DANDENONG VIC 3175
Tel: 1300 063 900 Fax: 03 8795 9221
www.tyrolitabrasives.com.au
sales@tooltechnic.com.au
Contacts: Steven Hincks, Steve Currie, Tony Farrell, 
Lauree Brewster
Tyrolit stands for top-quality, long-standing experience and innovative solutions. For 
over 90 years Tyrolit has been responsible for revolutionary innovative solutions in 
grinding, cutting, drilling, honing, dressing and polishing. Founded in 1919 and part of 
the Swarovski Group, Tyrolit is a global leader in manufacturing abrasives and is one 
of the fastest growing abrasive manufacturers in Europe. Tyrolit products continually 
evolve and are designed to improve performance and provide solutions to the toughest 
applications. If you would like to know more on the Tyrolit high-performance range of 
grinding and cutting solutions, drop into the Tyrolit stand at the NMW Sydney 2014.
UBEECO™ Packaging Solutions
Stand 1708
28 Sarah Andrews Close
ERSKINE PARK NSW 2759
Tel: 02 9670 9800 Fax: 02 9670 5530
www.ubeeco.com.au
sales@ubeeco.com.au
Contacts: Alex Burke, Rebecca Kesby, Adrian Biasin
UBEECO™ Packaging Solutions is market leader in providing products and solutions 
to the industrial manufacturing and supply market segments. Operating for more than 
43 years allows UBEECO™ to offer its customers fi t-for-purpose solutions to their 
packaging requirements. UBEECO™ has exclusive distribution rights on the premium 
plastic pallet and crate offerings from MSI and Eco Pallets for the entire Australian 
Eastern Seaboard. So, why plastic pallets? Unless you’ve been living under a rock, 
you‘d know that the industrial packaging industry is radically changing with the 
introduction and push of plastic options to move our goods.
VACUFLEX GmbH
Stand 1201
Hessenring 8-12
MÖRFELDEN-WALLDORF 64546 Germany
Tel: +49 6105 9339-0 Fax: +49 6105 9339-60
www.vacuflex.de
info@vacufl ex.de
Contact: Arno Filker
VACUFLEX is a part of the Schauenburg Hose Technology Group with its production in 
Mörfelden, Germany. We have a long history in manufacturing high-performance spiral 
and ducting hoses from almost all thermoplastics. With our innovation and experience 
gained since 1953, we are one of the leading European manufacturers of reinforced 
fl exible hose and ducting, hose assemblies, and connection systems from different 
materials for all industries.
Vative
Stand 2538
260A Blackburn Road
GLEN WAVERLEY VIC 3150
Tel: 1800 828 483 
www.vative.com.au
info@vative.com.au
Contacts: Andrew Czompo, Damien Lacey,
David Jaksa
Vative is an organisation comprising a group of dynamic and creative thinkers that 
take an analytical approach to process and operational performance which allows 
for innovative solutions according to customers specifi c needs. Vative Lean and Six-Sigma Excellence Coaches are seasoned professionals with a unique combination of 
academic and trade backgrounds. This blend of skills ensures that the solutions offered 
are simple, effective and realistic. Vative’s experience across all industries and company 
sizes allows for a fl exible approach to suit a variety of business needs. All programs 
and services are centred on best practice Lean and Six-Sigma methodology and tools.
Visy Technology Systems
Stand 1815
Building N13 Reo Crescent 
CAMPBELLFIELD VIC 3061
Tel: 03 9302 6744 Fax: 03 9302 6744
www.visytech.com
steve.jowett@visytech.com
Contacts: Bruce Seaton, Len Jones, Luke Ngyen,
Nick Phillips
Visy Technology Systems develops and distributes innovative product marking 
and labelling systems. Representing brands such as Hitachi, Panasonic, HSAjet, 
CAB, HM Systems and Label-Aire. Visy Technology Systems solutions address 
applications using Inkjet, laser and label print technologies. Common applications 
include part identifi cation, batch numbering, serial labels and barcodes. Hitachi Ink jet 
printing systems feature high speed fast dry printing ability with colour printing ability. 
Panasonic laser markers can mark into materials of all types. Popular for permanent 
markings into metals, plastics and ceramics. CAB label print and apply systems feature 
a modular collection of application options for precision label applications.
Wafangdian Xinyue Machinery Co Ltd
Stand 2200-03
Wudian Village,Jiulong, Wafangdian
DALIAN LN 116300 China
Tel: +86 411 39014093 Fax: +86 411 85399799
www.wfdxyjx.com
xinyuejixie1168@163.com
Our products include 5 series and 23 type such as Multi-stage pump for industry, jack-head pump, immersible pump, high-pressure pump and pump for fi re control. Highly 
energy saving, low noise, environment protecting, stable of running, convienience for 
setting up and fi xing. Corporacion owns several CNC Machines and hundreds of other 
equipments, which can manufacture over 60 million ton products.
Exhibitor Profiles| NMW
nationalmanufacturingweek.com.au   83
Watermark
Stand 2434
Level 3, 3 Richardson Place
NORTH RYDE NSW 2113
Tel: 02 9888 6600 Fax: 02 9888 7600
www.watermark.com.au
d.perkins@watermark.com.au
Contacts: Christian Schieber, David Perkins,
Ken Bolton
Watermark are patent and trade mark attorneys and intellectual property lawyers who 
encourage companies to look beyond protecting IP and manage their intellectual 
assets as a part of their business strategy. Working in partnership, we create a strategy 
to derive value from intellectual assets. We call it intellectual asset management (IAM), 
and it includes: understanding your business strategy and objectives; identifying and 
evaluating existing assets; market knowledge and competitor assessment; advice on 
creation and capture of intellectual assets; and extracting value. Watermark is a pioneer 
advisor in intellectual asset management in Australia - we’re making it the centre of 
what we do.
Weifang Xiaoyu Commercial Equipment Co Ltd
Stand 1605-03
3-22 Runyang Building
WEIFANG SD 261011 China
Tel: +86 536 820 3700 Fax: +86 536 820 3600
www.cnxyrack.com
nancy@xyrack.com
Contacts: Brad Duan, Henry He, Nancy Liu, Terry Tian
Weifang Xiaoyu Commercial Equipment is a specialised company focusing on providing 
service of design, manufacture, installation and maintenance for logistic and warehouse 
equipment. Our main products are heavy duty pallet racking, drive in racking, double 
deep pallet racking, VNA, ASRS and shuttle racking, long span shelving, mezzanine, 
cantilever and steel pallet etc.. All these products are made of high quality steel, the 
surface of which is static powder coating sprayed automatically, and the load capacity 
has passed through a rigorous test. All our products have the international quality 
certifi cate, such as ISO9001:2008, SGS and BV and ROHS etc..
Welding Technology Institute of Australia
Stand 1340
Unit 50/8 Avenue of the Americas
NEWINGTON NSW 2127
Tel: 02 8748 0110 Fax: 02 8748 0181
www.wtia.com.au
info@wtia.com.au
Contacts: Donna South, Kim Griffi ths, Cena Josevska
The Welding Technology Institute of Australia (WTIA) is the recognised national 
Australian body representing the overall interests of the Australian welding industry. 
Its primary goal is to lead and assist in making Australian industry locally and globally 
competitive in welding-related activities. The WTIA OzWeld School of Welding 
Technology and OzWeld Certifi cation deliver internationally benchmarked training, 
qualifi cation and certifi cation through the IIW programs, dovetailed with existing 
Australian qualifi cation and certifi cation. Through its council, boards and industry 
support groups, SMART industry groups and technical panels WTIA has representation 
from a tremendous range of industry, government and educational institutions, both 
locally and internationally.
Westair SCR Australia Pty Ltd
Stand 2525
12 Winchester Road
BIBRA LAKE WA 6163
Tel: 08 9418 8008 Fax: 08 9418 8008
westaircompressors.com.au
stevenchambers@westaircompressors.com.au
Contacts: Steven Chambers, Jamie Mckinnell,
Stuart Ainslie
SCR Australia, through its exclusive Australian agent, Westair International Pty Ltd, is 
pleased to announce its new range of direct-drive and variable-speed rotary-screw 
air compressors. Through an Australia-wide network of resellers, we can provide the 
complete solution for your compressed air needs. The variable-speed and direct-drive 
range (7.5 to 280KW) offers excellent value for money and can result in signifi cant 
savings on your power bill. Many of its components are of European design and 
manufacture, delivering equivalent performance and reliability. All our units are of robust 
design with low-speed, oversized airends and an uncomplicated one-to-one drive, 
resulting in strong, quiet, reliable, long-life machines.
White Industries
Stand 1619
18130 Werrego Highway
DALBY QLD 4405
Tel: 07 4672 5800 Fax: 07 4672 5899
craig.white@whiteindustries.com.au
White Industries, a dynamic Australian family-owned company from Dalby in 
Queensland, with outstanding expertise and service, continues to invest in its people 
and equipment. White Industries supplies the major industries in every state and 
territory of this great country including automotive and transport, engineering, energy, 
mining, pump manufacture, railways, shipbuilding, major construction and local 
councils. A modern, forward-thinking business, with local people at its heart, and a 
workforce of 50+, new investment in furnace capacity, and new offi ces in Brisbane 
and Sydney, with representation all around Australia, White Industries is looking to the 
future with confi dence.
White International Pty Ltd
Stand 1309
52–60 Ashford Avenue
MILPERRA NSW 2214
Tel: 02 9783 6000 Fax: 02 9783 6003
sales@whiteint.com.au
Contact: John Martorana
White International provides a comprehensive range of high-quality industrial 
equipment and solutions to tradesman, technicians, manufacturers and engineers. 
We market and distribute premium brands and pride ourselves on representing 
‘worlds best brands’. Holding in excess of 8,000 SKUs our products are used in a 
variety of industries such as maintenance and repair, aviation, petrochemical, mining, 
manufacturing and agriculture. White International services all of the Australian and 
New Zealand markets. To assist our distributors and end users in the product selection 
process, technical literature and support can be readily provided by our members.
Woodland Metal Spinning Pty Ltd
Stand 2644
81 Airds Road
MINTO NSW 2566
Tel: 02 8796 3900 Fax: 02 9824 5688
www.woodland.net.au
sales@woodland.net.au
Contacts: Malcolm Lowry, David Crawford
Offering metal-forming solutions, customer focus, and quality, Woodland Metal 
Spinning (WMS) is one of the most advanced metal-forming manufacturing facilities in 
Australia. WMS holds its place in the industry through its outstanding people, the latest 
CNC machinery, in-house tool making facility and workmanship. Metal spinning, laser 
cutting, metal fabrication, metal pressing and metal machining is what we do. Products 
we make range from household appliances to wind generators. One of our leading 
strengths lies in our capability to accurately form mild steel up to 8mm and stainless 
steel up to 6mm.
Wuhan Dapco Auto Parts Co Ltd
Stand 2310-03
606 Tower B, NOVA Center,
3 Trangle Lake Road
Economic & Technology Development Zone,
Hanyang 
WUHAN HB 430056 China
Tel: +86 27 8479 7279 Fax: +86 42 3594420
www.sino1.cn
sino1@sino1.cn
Wuhan Sino-1 Import & Export Co Ltd located in Wuhan. The company is at national 
level honored as “High-Tech Enterprise”, and the R&D Centre is honored at provincial 
level by Hubei government with 70 national technology patents. The company is a 
member of Chinese Clutch Industry and a member of Chinese Automobile Industry 
Association which passed ISO9001, QS9000, TS16949, ISO 14001, and OHSAS 
18001 certifi cation. In three continuous years, it has been chosen as one of the top 
one hundred auto component enterprises by The China Automotive News. It is also 
honored as “Excellent Supplier” by Dongfeng Automotive Company, DPCA and Yuchai 
Engine for multiple times. In 2014, we look forward to introducing our products to the 
world.
NMW | Exhibitor Profiles
84  SYDNEY 13 – 16 MAY 2014
Wurth Australia Pty Ltd
Stand 1614
2/1 Healey Road
DANDENONG SOUTH VIC 3175
Tel: 03 8788 1111 Fax: 03 9558 3100
www.wurth.com.au
scott.watkins@wurth.com.au
Contacts: Scott Watkins, Steve Guley,
Samantha Bennett, Trent Davis, Natasa Skoric
Wurth Australia provides operators across a diverse range of industries fast 
access to 12,000 active articles stocked in three warehouses strategically located 
across the country. Customers in metal trades can access anything from a 
single bolt to a pallet of silicone quickly and conveniently. Every Wurth product 
has been rigorously tested to our exacting quality standards. From fasteners to 
consumables, master tools and safety equipment, Wurth has a product that’s right 
for you! We are the market leader in assembly technology and related products, 
and we achieve this by offering customers reliability, quality, and an expert and 
available sales force.
Wuxi Kenke Heavy Industry Equipment Co Ltd
Stand 2200-04
Qinxin Industrial Fields, Binhu
WUXI JS China
Tel: +86 510 8355 0705 Fax: +86 510 8355 0373
www. kenketec.cn
sales@kenketec.cn
Contacts: Wei Huang
Kenke Heavy Industry Equipment is one of the world’s leading manufacturers and 
suppliers of welding manipulator, welding rotator and welding positioner. Leader in 
design, manufacturing and related services for 1+1 fi t-up rotator, automatic wind tower 
and long pipe production line. International quality certifi cates include ISO9001-2008 
and CE.
Xtralis
Stand 2822
236-262 East Boundary Road 
BENTLEIGH EAST VIC 3165
Tel: 03 9936 7000 Fax: 03 9936 7202
www.xtralis.com
marketing-apac@xtralis.com
Xtralis® is the leading global provider of powerful solutions for the early detection 
and remote visual verifi cation of fi re, gas and security threats. Xtralis technologies are 
able to provide the earliest warning of a fi re threat while distinguishing alarms from 
unwanted sources such as dust or diesel fumes. Very early warning gives users time to 
respond before life, critical infrastructure or business continuity is compromised.
Yawata Electrode (Thailand) Co Ltd
Stand 1442
82 Moo 5 Khamtalaysor-Khoksung Road
KHAMTALAYSOR KHAMTALAYSOR NAKHON 
30280 Thailand
Tel: +66 44 3333 80 Fax: +66 44 3333 78
www.yawata.co.th
opas@yawata.co.th
Contact: Opas Phuakthong
Yawata Electrode (Thailand) Co Ltd (YET) was founded in 1973 receiving initial know-how from Nippon Steel Welding Products and Engineering Co Ltd (presently Nippon 
Steel & Sumikin Welding Co Ltd or NSSW), one of the biggest electrode manufacturers 
in Japan. Yawata welding electrodes are manufactured under the strict standard of 
NSSW and with quality control at every step. 
Yomura Technologies Inc
Stand 1409-02
2-3 Kong Eighth Road Linkou
NEW TAIPEI 234 Taiwan
Tel: +886 2 8601 3839 Fax: +886 4 2359 4420
www.yomura.com.tw
sales@yomura.com.tw
Contacts: Grat Wu, Harry Kao, Roxy Chen
We have an international communications team (English/Japanese/Chinese); co-design 
& development with clients; expertise in mechanical design; prototype mock-up 
sample manufacturing; full process tooling work shop for moulds design & fabrication; 
high standard injection environment & equipments; SMT for EMS project; value added 
post- process & subassembly; qualifi ed product, and on time delivery. Our service 
includes global customer service (English/Japanese/Chinese); technical intelligence 
consultant; annual global exhibitions & service trips for customer relationship; and the 
communication fl ow.
Yueqing Fengda Trade Co Ltd
Stand 1527
238 Road Lateral,
Economic Development Zone Yueqing
WENZHOU ZJ 325600 China
Tel: +86 577 62667515 Fax: +86 577 62667501
www.fdtrade.com 
nancy@fdtrade.com
Contacts: Angel Huang, Nancy Ye
Our main products are MCB, RCBO, RCD, distribution boxes; weatherproof switches, 
wall switches & sockets, and industrial plugs & sockets. All of them comply with 
Australian standards.
Zhejiang Guidu Power Electronic Co Ltd
Stand 1830
15 Xinzhong Road, Jinyun Industrial Park, Jinyun
LISHUI ZJ 321400 China
Tel: +86 578 3185606 Fax: +86 578 3185550
www.zjguidu.com
matthew.shen@zjguidu.com
Zhejiang Guidu Power Electronic Co Ltd, a professional manufacturer of semiconductor 
chips and devices, was founded in 1983. The main products include thyristors, diodes, 
TRIACs, power modules, and solid-state relays. Guidu’s manufacturing strictly adopts 
ISO9001:2008 standards of production and quality management. So far, it possesses 
two patents of utility model and four patents of invention. Its production workshop 
covers an area of 40,000 square metres, with a modernised 100-thousand-grade 
purifi cation workshop.
Exhibition Directory| NMW
13 – 16 MAY 2014
SYDNEY SHOWGROUND |SYDNEY OLYMPIC PARK
Ausplas
Ausplas
WELCOME TO AUSPLAS 2014
Welcome to Australia’s only trade exhibition 
for plastics technology.
After a successful co-location with National 
Manufacturing Week (NMW) in Melbourne in 
2011, this year will be the fi rst time that Ausplas 
is incorporated into NMW Sydney in 24 years - an 
exciting development which will make the combined 
event especially fertile ground for the plastics 
industry.
Given that more than one third of the plastics 
industry’s output is to manufacturers – and that NSW 
is now Australia’s largest manufacturing region – the 
synergies with NMW will underpin a larger, more 
diverse audience, providing greater opportunity to 
connect plastics processors, converters and material 
suppliers buyers with the companies behind industry 
developments. 
Ausplas will be complemented by a number of 
valuable new features across NMW, designed to arm 
you with the tools to maximise productivity, evolve 
your product offering and grow your business.
• The Advanced Materials Product Zonewill 
provide access to new and innovative composites, 
while other exhibitors in Additive Manufacturing, 
Materials Handling, Engineering and Workplace 
Safety will also offer developments of interest to 
the plastics industry. 
• There will also be a rolling session of industry 
speakers in the Ausplas Hub- one of several 
industry-specifi c Solutions Theatresin which 
experts will present their strategies and ideas - 
free of charge - to Ausplas visitors. The program 
includes speakers from the Plastics Industry 
Manufacturers Association (PIMA), CSIRO and 
many more. 
We would like to thank all exhibitors, partners 
and sponsors, whose contribution is pivotal to 
the success of Ausplas 2014. For the chance to 
socialise with them plus fellow visitors, please 
be sure to attend our Networking Function from 
4 – 6pm on Tuesday 13 May - a relaxed, fun and 
informal end to a busy fi rst day that gets everyone 
together to enjoy a drink and a bite.
I wish you a productive and enjoyable visit to Ausplas 
2014, and hope you can tap into the latest ideas and 
innovations on display throughout the halls.
ANTHONY REED
Exhibition Director - Manufacturing & Energy 
Reed Exhibitions
SUPPORTING PARTNER/ASSOCIATION
MEDIA PARTNERS
Supporters and Sponsors
nationalmanufacturingweek.com.au/Ausplas    87
Amag Industries Pty Ltd  3125-04
Asia Plastik  3009
Beier Machinery Group  3025-03
Best Tooling (Shenzhen) Ltd  3025-02
China Wellhope Industrial Ltd  3125-01
Coating Chemical Industry Co Ltd  3119
Dalian TGI X-Trusion Technology Co Ltd  2727-04
Fit Mould  2727-03
Indis Limited  3020
Jean Cherng Enterprise Co Ltd  3113
Jwell Machinery (Shanghai) Co Ltd  3024-01
Li Jian Precision Mould Manufacture Co Ltd  3230-02
Lybina Pty Ltd  3012
Magic MP SPA  3423
Matila Industrial Co Ltd  3212
Ningbo Eagle New Material Co Ltd  3230-01
Ningbo Haitai Industry & Trade Co Ltd  3224-02
Ningbo Haitian Huayuan Machinery Co Ltd  3331
Pacifi c Urethanes Pty Ltd  3035
PBE-Roboplas Pty Ltd  2627
PIMA (Plastic Industry Manufactures of Australia)  3017
Plasquip Sales  3112
Qingdao Huasu Machinery Fabricate Co Ltd  3024-04
Ringier Trade Media Limited  3016
Roehlen Industries Pty Ltd  3433
S A Reverte Minerals  2923
Samhwa Corporation  3108
Shanghai Kingsun Plastic Mould Co Ltd  3135
Shenzhen Anges Machinery Co Ltd  3024-03
Shenzhen Square Silicone Co Ltd  3125-03
Shenzhen Sunway Plastic Mould Ltd  3025-04
Taiwan Plastics Industry Association  3117
Taizhou E-Plas Packaging Co Ltd  2727-02
Taizhou Huangyan Yisen Mould Co Ltd  2727-01
Tasman Machinery Pty Ltd  3431
Tianjin Taiyi Plastic Products Co Ltd  3125-02
Tianyi Chemicals (Qida Chemical)  3118
Twin Screw Industrial Co Ltd  3115
VEM Tooling Co Ltd  3019
Wittmann Battenfeld Australia  3023
YOKE Industrial Corp  3214
Exhibitor List by Alpha
COMPANY STAND COMPANY STAND
Ausplas | Exhibitor Profiles
88  SYDNEY 13 – 16 MAY 2014
AMAG INDUSTRIES PTY LTD
STAND 3125-04 
Amag Industries Pty Ltd is the recognised leading 
supplier in the fi eld with a large range of permanent 
electro-magnetic systems for variety of applications, 
from clamping on machine tool, plastic injection 
and stamping, to material handling for workshops, 
distribution centres, steel mills and so on. The 
permanent-electro double reversible magnetic 
circuit made it possible for us to offer highly effective 
applications for work piece holding on machine tools, 
quick mould clamping on presses and for handling 
a wide variety of ferrous load. Tens of thousands of 
systems are installed all over the world.
Suite 324, 1 Queens Road 
MELBOURNE VIC 3004
Tel: +86 139 16437001 Fax: +86 212 3015919
www.tcmagforce.com 
wengguangming@gmail.com
Contact: Weng Guang Ming
ASIA PLASTIK
STAND 3009
Advanced plastic manufacturing in Indonesia since 1985, 
supported by high-tech machineries and skilled human 
resources. Main products are large industrial support 
goods and rigid packaging like plastic pallet (blow 
method), pail and gallon, folded container, fl oat and pearl 
basket, jerry can and collapsible jerry can.
Jalan Rungkut Industri III/27A
SURABAYA East Java 60293 Indonesia
Tel: +62 3184 33078 Fax: +62 3184 92989
www.asiaplastik.com
asiagroup.export@gmail.com
BEIER MACHINERY GROUP
STAND 3025-03
We supply: BRD Series high-effi ciency single extruder; 
SJ Series high effi ciency single extruder; BRP Series 
parallel twin screw extruder; PVC roof tile extrusion line; 
plastic recycling; and plastic wood.
North Second Ring Road and
City Avenue Intersection
SUZHOU JS 215600 China
Tel: +86 512 58911759 Fax: +86 512 58172860
www.beierpm.com
hdf@beierpm.com
BEST TOOLING (SHENZHEN) LTD
STAND 3025-02
Best Tooling Technologies is a most competitive 
supplier of injection mould fabrication and total 
moulding solutions. BT’s mission is ‘keeping our 
customers successful’. Our core business strategy 
is to provide total plastics moulding solutions, which 
include mould design, mould fabrication, plastic 
components manufacturing and secondary processing 
services. We seek to differentiate ourselves by taking 
a proactive role at the early stage of our customers’ 
product design and development phase.
1F 6th Building, Zhengzhong Industrial Estate 
Fuyong SHENZHEN GD 518103 China
Tel: +86 755 26495300 Fax: +86 755 26495302
www.btmould.com
Info@btmould.com
Contacts: Jim Liu, Rex Sun
Exhibitor Profiles| Ausplas
nationalmanufacturingweek.com.au/Ausplas    89
Ausplas | Exhibitor Profiles
90  SYDNEY 13 – 16 MAY 2014
CHINA WELLHOPE
INDUSTRIAL LTD 
STAND 3125-01
China Wellhope Industrial Ltd was established in 
1993 and occupies 12,000 square metres. Currently 
it employs 60 professional engineers and designers 
who work with great passion to serve worldwide 
clients. China Wellhope specialises in designing and 
manufacturing plastic injection moulds, blow moulds, 
die-casting tooling, and injection moulding. Benefi ting 
from up-to-date machinery from Japan (Sodick, Mori-Seiki), Korea and Taiwan, we are able to make high-quality precision tools with machining tolerance to 
0.001mm, and large tools size up to 2000 x 2000 x 
2000mm. Wellhope has achieved prestige in international 
markets with quality products, prompt delivery and cost-effective solutions.
3rd Industrial Zone, Luotian, Songgang
SHENZHEN GD 518105 China
Tel: +86 755 27419595 Fax: +86 755 27149507
www.wellhope-mould.com 
lydia@wellhope-mould.com
Contact: Lydia Liu 
COATING CHEMICAL INDUSTRY 
CO LTD 
STAND 3119
Coating Chemical Industry Co Ltd (CCIC) was 
established in 1988, and specialised in producing 
environmental friendly materials: TPU granule, PU resin 
and PU adhesives. For internationally renowned brands 
CCIC provides chemical raw materials and professional 
technical support and adopts co-development model to 
help customers improve brand images and corporate 
values. The series of products are widely used in daily 
life, from food packaging, functional textile processing, 
home furniture (kitchen) materials processing, auto 
parts assembly, sporting goods materials, wire and 
cable materials to medical applications.
35 Twenty-First Road, Taichung Industrial Park 
TAICHUNG 408 Taiwan 
Tel: +886 4 2359 2727 Fax: +886 4 2359 0576
www.coating.com.tw
customerservice@mail.coating.com.tw
Contacts: James Lin, Talen Lin, Tracy Chen
DALIAN TGI X-TRUSION 
TECHNOLOGY CO LTD
STAND 2727-04 
We supply extrusion tooling and extruders.
141 Yaogong Street Ganjingzi District
DALIAN LN 116037 China
Tel: +86 138 9861 8530 Fax: +86 411 82313157
www.tgixdl.com
jj@tgix-trusion-dl.com
Contacts: Jurgen Jungwirth, Qu Luming,
Lemmon Fan
FIT MOULD
STAND 2727-03
Fit Mould is located in Shenzhen City in China. We 
mainly make and export high-quality plastic injection 
moulds and parts. Equipped with advanced and 
precise machines and equipment such as Mori Seiki 
high-speed CNC milling machines, Sodick high 
precision EDMs and wire-cut machines, and Mitutoyo 
CMM machines, Fit Mould can produce 300 sets of 
moulds of high quality a year. In our moulding facility we 
have 80 moulding machines from 80T to 650T to cater 
for wide-ranging demands.
Zhida Industrial Zone, West Longping Road
Long Gang District
SHENZHEN GD 518172 China
Tel: +86 755 89303281 Fax: +86 755 89303282
www.fit-mould.com
Sunny.lee@fit-mould.com
Exhibitor Profiles| Ausplas
nationalmanufacturingweek.com.au/Ausplas    91
INDIS LIMITED
STAND 3020
Supplier of Colourant and Additives for Industry. raw 
material supplier to plastic masterbatch manufacturers. 
Free samples on most products. Pigments, oxides, 
solvent dyestuff, wb colourant, additives, light 
stabilizers, antioxidants, thermo encapsulated pigments, 
fl ush pigments etc.
300 Richmond Road
GREY LYNN Auckland 1021 New Zealand
Tel: +64 9426 2610 Fax: +64 2155 3613
www.indisnz.com
andrew.benton@indisnz.com
Contact: Andrew Benton
JEAN CHERNG ENTERPRISE
CO LTD 
STAND 3113
Founded in 1987, JC started as a small factory 
producing punches. The company found its strength 
specialising in making special parts and precision 
mould parts. JC specialise in manufacturing of hot 
runner system parts, automation machinery parts, 
optical-electric parts, aerospace & medical parts, 
plastic mould parts, press mould parts, high precision 
tungsten carbide parts and others. The company values 
as follow: Build our standard in upstream; continuous 
improvement in quality; thinking ahead of customers.
Lane 379, 2 Chung Hua Road, Shu Lin 
NEW TAIPEI 238 Taiwan
Tel: +886 2 8686 1768 Fax: +886 2 8686 7540
www.jeancherng.com.tw
jech1768@mail.mold.net.tw
Contacts: Bayer Lin, Sophia Wu
JWELL MACHINERY (SHANGHAI) 
CO LTD 
STAND 3024-01
Shanghai Jwell Machinery Co Ltd is the vice chairman 
of China Plastic Machinery Industrial Association, and 
is one of the largest plastic machinery manufacturing 
companies in China with 2300 workers. The main 
products are: plastic pipe extrusion lines, window profi le 
extrusion lines, plastic sheet, board and casting fi lm 
extrusion lines, single and twin (conical and parallel) 
screw extruders. We specialise in the design and 
manufacture of all kinds of different single-layer or 
multilayer co-extrusion dies, various types of hydraulic 
screen exchangers, and mirror rollers.
111 Chun Yi Road, Huang Du Industrial Zone
JIADING SH 201804 China
Tel: +86 21 69595477 Fax: +86 21 69596262
www.jwell.cn 
sales@jwell.cn
Contacts: Li Su, Liang Ruiqiang
LI JIAN PRECISION MOULD 
MANUFACTURE CO LTD 
STAND 3230-02
Established in 1996, LJ has provided product design, 
mould design and manufacture and injection moulding 
services to European & American companies for more 
than 15 years. Our products are injection moulds and 
die casting moulds, which are made for auto parts, 
farming machinery components, electric garden 
cutting tool housings, electric switches, dust collector 
components, TV shells, fridge components, industrial 
fans, lighting, medical devices, and more.
Xinmalian Development District, Dalang Town 
DONGGUAN GD 523797 China
Tel: +86 769 83102688 Fax: +86 769 83186782
www.ljmold.com 
ljmold@gmail.com
Contacts: Bobbie Ye, Yvonne Wang
Ausplas | Exhibitor Profiles
92  SYDNEY 13 – 16 MAY 2014
LYBINA
STAND 3012
Since our companies foundation in 2003 it has been 
our single goal to produce the best possible Australian 
sourced and manufactured welding rods for sale and 
use in the Australian and International plastic fabrication 
industries, and more recently the 3D printing arena. 
We have grown to include a comprehensive range of 
plastic welding equipment, Lybina Pty Ltd predominantly 
sources from German manufacturers who source and 
build locally, thus ensuring German quality and strength 
built in.
11A Nicole Close
BAYSWATER VIC 3137
Tel: 03 9761 4070 Fax: 03 9761 6017
www.lybina.com
accounts@lybina.com
Contacts: Jeremy Gray, Joanna Gray
MAGIC MP SPA
STAND 3423
Magic MP SPA was founded in 1959 as a manufacturer 
of machines for extrusion and blow moulding plastic 
materials for various processing industries. The constant 
research and development of new technological options 
ensures the high quality of Magic machines. Dozens 
of patents obtained in almost 55 years of activity 
testify to the effort and investment made in research 
and development. One of our successes is to have 
believed in and developed, fi rst in the world, fully-electric 
technology since 1997 when we introduced the fi rst 
machine. The customer is our most important asset.
Via Gicomo Medici 24
MONZA 20900 Italy
Tel: +39 039 2301096 Fax: +39 039 2301017
www.magicmp.it 
customercare@magicmp.it
MATILA INDUSTRIAL CO LTD 
STAND 3212
The main products include mono/double/three/
fi ve layer blown fi lm machine, crushing/washing/
recycling/pelletizing line, and twin screw compounding 
pelletising machine. Besides, Matila supplies various 
type of bags making machines and printing machines. 
Matila produces the special application blown fi lm 
machine, such as stretch fi lm, cling fi lm, shrinkable fi lm, 
agriculture fi lm, 2/3 color strips line fi lm according to 
client’s demand.
186 Chung Hsiao Road Pali
NEW TAIPEI Taiwan
Tel: +886 2 2619 2222 Fax: +886 2 2610 1100
www.matila.com.tw
matila@matila.com.tw
Contacts: Jimmy C.T Shen, Lukas Shen, Phoebe Shen
NINGBO EAGLE
NEW MATERIAL CO LTD 
STAND 3230-01
We carry modifi ed and reinforced pa6. 
88 Batang Road, Hangzhou Bay New District
NINGBO ZJ 315336 China
Tel: +86 574 63937308 Fax: +86 574 63209222
www.cn-egl.com 
info@eaglepla.com
Contacts: Lu Jianhua, Sky Chiu
Exhibitor Profiles| Ausplas
nationalmanufacturingweek.com.au/Ausplas    93
NINGBO HAITIAN HUAYUAN 
MACHINERY CO LTD
STAND 3331
As a subsidiary of Haitian International Holdings Ltd, 
Haitian Plastics Machinery Ltd practises the continuous 
development of its position as a world market leader. 
We focus on injection moulding machines in a strong 
growing market for standard applications and use highly 
effi cient and standardised production and assembly 
processes. Our machines include: Mars II series with an 
energy saving system, from 60 tons up to 3300 tons; JU 
II, a large size injection moulding machine, from 1200 
tons up to 6000 tons; and the VE II full electric machine, 
from 40 tons to 550 tons.
Export Processing Zone, Beilun
NINGBO ZJ 315806 China
Tel: +86 574 86188888 Fax: +86 574 86181742
www.haitian.com
alexis@vip.163.com
PACIFIC URETHANES PTY LTD
STAND 3035
Pacifi c Urethanes Pty Ltd is an Australian owned 
company based in Melbourne, Victoria specialising in the 
development and production of Polyurethane Systems 
for the Australian, New Zealand and Asian markets. Our 
focus is on providing customised solutions for a wide 
range of polyurethane applications, from fl exible and 
rigid foam to castable elastomers and adhesives. Pacifi c 
Urethanes has a team of highly experienced chemists 
able to develop polyurethane systems to satisfy their 
customer’s vast array of uses and production capabilities. 
The development team of Pacifi c Urethanes has an 
on-site laboratory and testing facility to ensure a fast 
turnaround of product development and production.
PO Box 8214
CARRUM DOWNS VIC 3201
Tel: 1300 736 963 Fax:03 8779 0110
www.pacificurethanes.com
owen.stam@pacificurethanes.com.au
Contacts: Colin Groom, Owen Stam, Gerard Murray, Jim 
Hall, Giuseppe Massa
PBE-ROBOPLAS PTY LTD 
STAND 2627
PBE-Roboplas Pty Ltd is a supplier of plastics and 
rubber machinery as well as ancillary equipment and 
robots suitable for a vast range of applications including 
turnkey injection moulding systems for packaging, 
medical, mining; turnkey blow moulding system 0,2-200 
Litres from 1 to 6 layers; chillers; dehumidifi er dryers; 
mould heaters; loaders; conveyors; static chargers and 
grippers etc. With 3D CAD facilities, and a fully equipped 
engineering workshop, we design and manufacture 
special purpose machines not readily available on the 
market such as assembling machines, stackers, IML, box 
fi lling devices. Our focus is to provide customers with 
energy effi cient, safe and reliable machinery with special 
emphasis on after sale and service.
Unit 5-6, 10 Foundry Road 
SEVEN HILLS NSW 2147
Tel: 02 9674 6511 Fax: 02 9624 1317
www.pbe-roboplas.com.au
sales@pbe-roboplas.com.au
Contacts: Francis G. Frutschi, Oliver Blunschi,
Paul Blunschi, Shaun Parker
PIMA (PLASTIC INDUSTRY 
MANUFACTURES OF AUSTRALIA)
STAND 3017
PIMA is the industry body representing member 
organisations and suppliers that process plastics and 
other polymer material in Australia. Membership is 
available to companies and individuals in the plastics 
industry. Contact PIMA for more information or 
application forms or inquire with a Committee Member. 
PIMA is the leading industry association for organisations 
processing plastics and other polymer materials in 
Australia. We are a not for profi t body established to 
foster a vibrant & innovative plastics industry for the 
benefi t of our youth and the nation, and seek to unite 
industry, academia and government in this cause.
PO Box 324
LIDCOMBE NSW 2022
Tel: 0419 603 332 Fax: 02 9724 1775
Contacts: Keith Monaghan – President,
Ralph Cable – Secretary,
Dennis Wawn - Vice President 
Ausplas | Exhibitor Profiles
94  SYDNEY 13 – 16 MAY 2014
PLASQUIP SALES 
STAND 3112
Plasquip Sales is a specialist supplier to the plastics 
industry in Australia and New Zealand. Our slogan of 
quality and effi ciency in plastics is a motivating force in all 
that we offer. Plasquip Sales provides a broad range of 
machinery and associated equipment and consumables 
for fabricators of rigid-sheet products, including bending 
equipment, laser cutting and engraving machines, 
diamond edge-polishing machines, fl ame-polishing 
machines, thermoforming machines, vacuum forming 
machines, 5-axis CNC trimming machines, CNC router 
bits, sheet butt welding machines, hot-air and extrusion 
welders, weld rod, plastic heating ovens, and an acrylic 
adhesive system. Plasquip Sales is also the Australian 
and New Zealand agent for the Neutrex purging 
compounds.
100 Wharf Road 
MELROSE PARK NSW 2114 
Tel: 02 9858 4498 Fax: 02 9858 4747
www.plasquip.com.au 
kenc@plasquip.com.au
Contacts: Daniel Fawkes, Ken Craddock,
Navin Nand
QINGDAO HUASU MACHINERY 
FABRICATE CO LTD
STAND 3024-04
Our Main products are: HDPE double wall corrugated 
pipe extrusion line (32-1200mm); UPVC double wall 
corrugated pipe extrusion line (75-1000mm); HDPE 
water supply/gas distribution pipe extrusion line (16-1200mm); PE steel band reinforced sprial pipe extrusion 
line (300-3000mm); HDPE large calibre hollow wall spiral 
pipe production line (200-3000mm); and PE/PP/PA/PVC 
single wall corrugated pipe production line (4-200mm).
8 Haier Road, Jiaozhou Bay
Industrial Zone, Jiaozhou 
QINGDAO SD 266300 China
Tel: +86 138 64817239 Fax: +86 532 87273086
www.qdhuasu.com 
huasu@qdhuasu.com
RINGIER TRADE MEDIA LIMITED
STAND 3016
As a leading source of exclusive content and technical 
articles for plastics and rubber industry in the Asia 
Pacifi c region, International Plastics News for Asia 
and its e-newsletters, vertical, digital e-magazine and 
mobile apps reach decision-makers in Asia Pacifi c’s 
plastics processing companies, contract moulders and 
manufacturers. Published six times a year, it provides 
the latest market information, quality technical features, 
trade show reviews, and company profi les. Also included 
are technical articles from Ringier’s family of plastics 
magazines covering the Greater China, Middle East and 
Africa regions, each of which are leading magazines in 
their respective markets.
9/F Cheong Sun Tower, 118 Wing Lok Street
SHEUNG WAN HK China
Tel: +852 2369 8788 Fax: +852 2869 5919
us.industrysourcing.com
ginnylin@ringier.com.hk
ROEHLEN INDUSTRIES PTY LTD
STAND 3433
Mold-Tech is the largest dedicated texturing source 
worldwide. We apply patterns and grains on to 
injection and blow moulds, dies, roller embossing 
tools, press plates and art pieces. Mold-Tech is the 
world leader in the development and implementation of 
creative textures that can give your product the edge 
to stand out from the crowd! PROCON Pumps has 
manufactured high quality, dependable pumps since 
1950. Our precision, hand crafted pumps have served 
as the industry benchmark for performance in systems 
that require transferring clean liquids at pressures up to 
17 bar and fl ows from 35 to 2100 litres per minute.
1/46 DeHavilland Road
MORDIALLOC VIC 3195
Tel: 03 9580 4155 Fax: 03 9580 2954
www.mold-tech.com
ruddick@roehlen.com.au
Contacts: Damon Ruddick, Donovan Shaw,
Paulo Vilaca
Exhibitor Profiles| Ausplas
nationalmanufacturingweek.com.au/Ausplas    95
S A REVERTÉ MINERALS
STAND 2923
S A Reverté has focused on developing state-of-the art production processes for micronisation, 
ultramicronisation and treatment, both in dry and 
wet calcium carbonate processing. Reverté has also 
developed its own technology for obtaining treated 
products, special water-repellent products, for the rigid 
and fl exible plastic industries, making them behave like 
a fl uid which gives the fi nal products increased strength 
and gloss. Reverté is a technological leader in the area 
of calcium carbonates with a range of products to be 
used in different plastics applications like polyolefi n 
masterbatches and compounds, rigid and fl exible PVC, 
polyamides and thermoset polyesters, among others.
PO Box 33993
Takapuna AUCKLAND 0740 New Zealand
Tel: +64 9 488 7771 Fax: +64 9 488 7772
www.reverteminerals.com
kirk@coxmin.com
Contacts: Kirk Robinson, Radek Pavelec,
Grant Rothville, Mark Whiskin
SAMHWA CORPORATION
STAND 3108
A leading masterbatch manufacturer in Korea, Samhwa 
has been providing local and world plastic industry with 
colour concentrates, additive masterbatches and XLPE 
compounds since 1986. Our main commodity is black 
and white masterbatch, colour masterbatch, additive 
masterbatch and XLPE compounds.
611–26 Guro-dong, Opus 1 Building #309 
SEOUL 152-050 South Korea
Tel: +82 2 2671 0477 Fax: +82 2 2631 1462
www.samtech.kr
chmin@samtech.kr
Contacts: PJ Kwon, CH Min
SHANGHAI KINGSUN PLASTIC 
MOULD CO LTD
STAND 3135
Shanghai Kingsun Plastic Mould Co Ltd supplies 
systematic solutions for high-quality moulds and plastic 
parts. We offer an integrated service including tooling, 
moulding, secondary processing and assembly, with 
advantages such as an excellent team, precision 
equipment, innovative R&D, lean production, perfect 
marketing net, systematic project management, and full 
service.
No 97, Lane 965, Xiangjiang Road, Jiading District 
NANXIANG TOWN SH 201802 China
Tel: +86 138 1859 5728 Fax: +86 21 6912 2522
xuyao@sino-kingsun.com
Contacts: Xuyao, Pinggong
SHENZHEN ANGES
MACHINERY CO LTD
STAND 3024-03
We specialise in the engineering and manufacture of 
cooling and temperature control equipment, including 
industrial chillers, laser chillers, low temperature chillers, 
screw type chillers and many more.
Building A, Nanyue Industrial Park, Yuxin Road
Guanlan Street, Baoan District
SHENZHEN GD 518110 China
Tel: +86 755 28227242 Fax: +86 755 28227243
anges04@agschiller.com
Contact: Sunny Li
Ausplas | Exhibitor Profiles
96  SYDNEY 13 – 16 MAY 2014
SHENZHEN SQUARE SILICONE 
CO LTD
STAND 3125-03
As a leading company specialising in producing 
macromolecule organic silicone materials in China, 
our company is the fi rst to be engaged in large-scale 
manufacturing and selling of solid silicone rubber 
and liquid injection moulding silicone rubber (LSR) in 
China. Our products are widely used in industries such 
as baby feeding nipples, goggles, household wares, 
medical equipment, sports and health care equipment, 
industrial machinery, electrical power facilities, 
electronics, automobile and other consumption 
products.
Building 6, New Industry Area
Xialilang, Buji Town, Longgang
SHENZHEN GD 518112 China
Tel: +86 755 28805066 Fax: +86 755 28805428
www.squaresilicone.cn
sales@squaresilicone.cn 
Contact: Li Yan Min
SHENZHEN SUNWAY PLASTIC 
MOLD CO LTD
STAND 3025-04
Sunway is mainly engaged in producing medium and 
large injection moulds with 15 years’ experience. 
1F, Xinlong Technology Park
26 Industrial South Road
Rentian village, Fuyong Baoan 
SHENZHEN GD 518103 China
Tel: +86 755 29609988 Fax: +86 755 29609981
www.sunwaymold.com
gary@sunwaymold.com 
TAIWAN PLASTICS INDUSTRY 
ASSOCIATION 
STAND 3117 
Plastic Association has been established for 53 
years, providing plastic production, holding business 
seminars, organising foreign exhibition and trade 
promotion mission, arranging investment and 
cooperation for plastic technology. We produce parts of 
computer; electronic; communication; packing material; 
containers; bottles; exercise goods and other. We also 
provide additive and modifi cation for plastic, composite 
material and engineering plastic.
8F, 162 Chang An East Road, Section 2 
TAIPEI Taiwan 
Tel: +886 2 2771 9111 Fax: +886 2 2731 5020
www.ttpia.com.tw
ttpia@ms3.hinet.net
TAIZHOU E-PLAS
PACKAGING CO LTD
STAND 2727-02
2E-PLAS, a PET packaging specialist, focusing on 
satisfying quality in all work and aiming at ‘green 
campaign, eco world’, designs and produces PET 
preforms and bottles from 200ml to 5L for water, juice, 
alcohol, carbonated drink, hot-fi lling, food, oil, condiment, 
cosmetics, pharmaceuticals, as well as accessories 
including closures, handles and more. E-PLAS processes 
on advanced equipment such as Husky injection 
moulding machines and high-quality moulds, and under 
stringent quality control through the whole course, 
outstanding in quality and reliable in supply, meeting all 
the high standards and changing customer requirements 
of the food and beverages industry around the world.
6 Chaoyuan Road
Western Industrial Area Huangyan
TAIZHOU ZJ 318020 China
Tel: +86 576 81101115 Fax: +86 576 84790333
www.e-plaspackaging.com 
Sales@e-plaspackaging.com
Exhibitor Profiles| Ausplas
nationalmanufacturingweek.com.au/Ausplas    97
TAIZHOU HUANGYAN YISEN 
MOULD CO LTD
STAND 2727-01
We welcome you to visit our stand and get to know our 
business.
38 Kaituo Road, Xinqian Street, Huangyan
TAIZHOU ZJ 318020 China
Tel: +86 139 57617921 Fax: +86 576 84080016
www.yisenmould.com 
sale@yisenmould.com
TASMAN MACHINERY PTY LTD
STAND 3431
Tasman Machinery supplies a full range of machinery 
and related equipment to the Australian plastics 
manufacturing sector. We are the market leader in 
Australia, supplying highly energy effi cient all electric 
injection moulding machines from Sumitomo. We supply 
equipment for vacuum forming, injection moulding, 
extrusion, and blow moulding.
3/51 Grange Road
CHELTENHAM VIC 3192
Tel: 03 9584 6055 Fax: 03 9584 8355
www.tasmanmachinery.com.au
dermid@tasmanmachinery.com.au
TIANJIN TAIYI PLASTIC 
PRODUCTS CO LTD
STAND 3125-02
Tianjin Taiyi Plastic Co Ltd is a large-scale private 
enterprise specialised in manufacturing plastic 
thermoformed packing products. Our main products 
include CPET, APET, PP, and PS plastic trays and so 
on and all goods are produced in sterile environment. 
CPET products are developed by our technicians and 
our CPET tray is a favourable and high barrier material 
and is temperature-resistant (-40°C to +220°C). It can 
be used in the oven and microwave oven and frozen 
immediately. All CPET products have passed FDA, EEC 
evaluation and Japanese certifi cation and are widely 
used in in-fl ight, catering, voyage, baking, seafood, and 
instant food applications. 
3 Xinghua 4th Branch Road
Xiqing Economic Development District
XIQING TJ 300385 China
Tel: +86 22 23979708 Fax: +86 22 23978788 
www.tjtaiyi.com.cn 
tjtaiyi_05@126.com
TIANYI CHEMICALS (QIDA 
CHEMICAL)
STAND 3118
Shandong Tianyi Chemical Corporation is a world 
famous supplier of fl ame retardants (TBBA, DBDPE, 
DBDPO, BPS, HBCD, MCA, APP, FR245 and TPP), oil 
drilling fl uids (CaBr2, LiBr, NaBr, HBr, NPB), functional 
monomer (DAAM and ADH used in coating and painting, 
diphenyl oxide for heating transfer oil). The company is 
accredited to ISO9001:2000 and ISO9001:14001. We 
always believe: ‘Quality is life, honesty is fundamental, 
innovation is power, and service is soul!’. We strive 
for mutual development with domestic and foreign 
customers and share market resources! 
63 Bourke Street
BULLEEN VIC 3105
Tel: 0435 251 099 Fax: 03 86928616
www.tychemgroup.com
alex@qidachemical.com
Contact: Alexander Bao
Ausplas | Exhibitor Profiles
98  SYDNEY 13 – 16 MAY 2014
TWIN SCREW INDUSTRIAL CO LTD 
STAND 3115
New extruder generation and new range of downstream 
equipment for profi le extrusion is adequate to 
appropriate formulations with reliable die system and 
calibration cooling sections. Through actual production 
runs a commercial offering to the marketplace with 
hardware reliability and integrated software performance 
allow all the demands made on the products.
340 Daying Xinshi
TAINAN Taiwan 
Tel: +886 6 501 4056 Fax: +886 6 501 3805
www.twisic.com
twisic@ms37.hinet.net
Contact: Su Hui Tzu
VEM TOOLING CO LTD
STAND 3019
VEM Tooling is a high-precision mould maker for the 
plastics industry. Our two factories are located in 
Rayong, Thailand, and Shenzhen, China. VEM Tooling 
has about 300 employees and makes 500 moulds per 
year.
2nd Boulevard, Longhui Park 
3rd Fuqiao Industrial Zone, Fuyong Town 
SHENZHEN GD 518000 China
Tel: +86 755 27347095 Fax: +86 755 27335860
www.vem-tooling.com
mail@vem-ltd.com
Contacts: Marc Weinmann, Lily Zou
WITTMANN BATTENFELD 
AUSTRALIA
STAND 3023
Wittmann Battenfeld, a company of the Wittmann 
group, is a leading manufacturer of injection moulding 
machines for the plastics industry, with its production 
plant in Kottingbrunn, Lower Austria, and its own sales 
and service companies as well as representations 
in 60 countries worldwide. The production program 
comprises the complete range of injection moulding 
machinery from micro injection moulding machines 
to large machines with 1,600 tons clamping force, 
including vertical machines and multi-component 
injection moulding machines. Application technology 
packages round off the product portfolio, which is 
complemented by the range of robotics and peripheral 
equipment offered by Wittmann.
Unit 9, 42 Garden Boulevard
DINGLEY VILLAGE VIC 3172
Tel: 03 9551 4200 Fax: 03 9551 4300
www.wittmann-group.com.au
peter.lucas@wittmann-group.com.au
Contacts: Peter Lucas, Jason Frendo
YOKE INDUSTRIAL CORP 
STAND 3214
Since 1985, the professional manufacturer of industrial 
safe lifting components, YOKE Industrial Corp, has been 
known for its research, development and innovation. 
For over 20 years, quality and safety have been the 
one and only commitment of YOKE Industrial Corp. 
Other than ISO 9001 and Chinese National Laboratory 
Accreditation, other international product type approvals 
such as BG Prufzert of Germany, ABS of US , DNV of 
Norway, SABS of South Africa, CSA of Canada and 
ARAMCO of Saudi Arabia were also acquired.
39 Thirty-Third Road, Taichung Industrial Park
TAICHUNG Taiwan
Tel: +886 4 2350 8088 Fax: +886 4 2350 1001
www.yoke.net
info@mail.yoke.net
Contacts: Katie Cheng, Peiling Liao
THE CLEAN ENERGY SHOW
all-energy.com.au
All-Energy Australia is proud to be co-located with 
Sustainability in Business, Waste Expo & Inter-Water Australia
BOOK YOUR STAND NOW!
Call 02 9422 2568 or email guy.freebody@reedexhibitions.com.au
> 5,578total unique attendees
> 53%increase in attendance since 2011
> 93%of visitors indicated they are likely to visit the event in 2014
> 89%of visitors were ‘satisfi ed’ or ‘very satisfi ed’ with the event
>80% of decision-makers saw something they were likely to buy
> 63%of visitors to were Owners, Buyers, Managers, Directors & CEOs
>Visitors spent on average of 5.5 hoursat the event
MELBOURNE CONVENTION & EXHIBITION CENTRE| 15 – 16 OCTOBER 2014
AUSTRALIA’S LARGEST CLEAN & RENEWABLE ENERGY EVENT
australiansustainability.com.au
Australia’s most valuable platform for businesses embracing 
sustainability to drive growth and profitability.
• 736 total unique attendees
• 57%increase in attendance since 2012
• 78%of visitors agreed that it is a ‘must attend event’
• 76%of decision-makers saw something they were likely to buy
• 84%of visitors were ‘satisfied’ or ‘very satisfied’ with the event
• Visitors spent on average of 6 hoursat the event
15 & 16 OCTOBER 2014
MELBOURNE CONVENTION & EXHIBITION CENTRE
BOOK YOUR STAND NOW!
CALL 02 9422 2568 OR EMAIL GUY.FREEBODY@REEDEXHIBITIONS.COM.AU
STRATEGIC EVENT PARTNERS
SUSTAINABILITY IN BUSINESS IS PROUD TO BE CO-LOCATED WITH 
ALL-ENERGY AUSTRALIA, WASTE EXPO & INTER-WATER AUSTRALIA
Exhibitor Profiles| NMW
Our Team
John Gorton........................ Group Exhibition Director
Anthony Reed................................. Exhibition Director
Guy Freebody.......................................Sales Manager
Stephen Cuff................................... Account Manager
Cory McCarrick............................... Account Manager
Jon Williams.................................... Account Manager
Ana Maria Faust.............................. Content Manager
Patrick Bell....................Strategic Marketing Manager
Carly Svendsen.......Exhibition Coordination Manager
Wendy Hamano........................Exhibition Coordinator
Chiharu Hara............................Exhibition Coordinator
Jessica Humphries......................Marketing Executive
Christiane Beck...........................Operations Manager
Jonathan Whyman......................Operations Manager
Tom McAlister.........................Operations Coordinator
Jacinta Pane.....................................Graphic Designer
ORGANISED BY
WIN A TRIP FOR TWO TO FIJI!
1. Collect a “NMW Passport” at registration. (Located at the entrance to NMW)
2. Visit all 10 Exhibitors listed on the NMW Passport and enter their code words in the space allocated.
3. Visit at least 2 sessions at the Solutions Theatres and collect the code words after the presentation.
(Code word will appear on the screens after the presentation).
4. Complete required information and contact details on the NMW Passport.
5. Place completed NMW Passport in the competition barrel at NMW Customer Service – located at the entrance to 
the exhibition – by 4.00pm, Friday 16/05/2014.
NMW 2014 PASSPORT COMPETITION 
HOW TO ENTER...
nationalmanufacturingweek.com.au   101
102  SYDNEY 13 – 16 MAY 2014 102  SYDNEY 13 – 16 MAY 2014
Advertising Index
A.P.I. Pneumatic  2623  77
A1 Testing & Tagging Pty Ltd  2719  51
BAC Systems Pty Limited  2123  47
Better Springs  1211  75
Blackwood  1015 & 1037  47
Blue Water Engineering Pty Ltd  2131  75
Cadgroup Australia Pty Ltd  1541  71
Camfil Australia  1348  75
Centralised Pumping Systems  1831  59
CGB Precision Products Pty Ltd  2518  77
Coast Electrical Industries Pty Ltd  1524  77
Cryonomic 1930  75
Donaldson Australasia Pty Limited  2624  71
Duromer Products Pty Ltd  2716  69
ECi M1  1544  67
Ensitech Pty Ltd  1347 & Demo H  67
Enterprise Connect  2225  67
Ezi-Duct Pty Ltd –
Polex Environmental Engineering Pty Ltd 1719  67
Gullco International Pty Ltd  1245  63
Halo Business Intelligence (BI)  1746  71
Industrial Measurement Solutions Pty Ltd 1711  61
Industry Update Media  1817  21
IndustrySearch.com.au 1508  51
Innovative Welding  1146 & Demo A  61
Integrated Emergency & Industrial Equipment 2738  61
John Thompson  2545  61
Jubilee Spring Co  2539  55
Kap Components Australia Pty Ltd  2349  55
Kelvindale Products Pty Ltd  2339  4
KLINGSPOR Australia Pty Ltd  2224  59
KYOCERA Asia Pacifi c Pte Ltd  2448  71
Leussink Engineering Pty Ltd  1819  59
Mackay Consolidated Industries Pty Ltd 2639  53
Magic MP SPA  3423  89
Manufacturers’ Monthly/Ferret.com.au 1644  25 & 43
Metal Science Technologies Pty Ltd  1344  59
Moreton Bay Regional Council  2223  53
National Safety Council of Australia Ltd 2816  39
Ningbo Haitian Huayuan Machinery Co Ltd 3331  89
NSW Department of Trade and Investment 1925  11
Pacifi c Urethanes Pty Ltd  3035  89
Radius Benders Pty Ltd  2125  47 & 77
Ringier Trade Media Limited  3016  103
Risen Machinery Co Pty Ltd  2523  63
Smenco Pty Ltd  1137  63
Staetite Fasteners  2438  63
Stratasys 1437  55
Sunlec International Pty Ltd  1637  39
Syspro Australia Pty Ltd  1543  7
Techspan Australia Pty Ltd  1842  7
Welding Technology Institute of Australia 1340  43
White International Pty Ltd  1309  69
Woodland Metal Spinning  2644  69
Wurth Australia Pty Ltd  1614  69
COMPANY STAND  PAGE COMPANY STAND  PAGE
nationalmanufacturingweek.com.au   103
nationalmanufacturingweek.com.au
co-located with
26 – 29 MAY 2015 |MELBOURNE CONVENTION & EXHIBTION CENTRE
Limited onsite rate available
until 4pm Friday 16th May!
ADVANCING MANUFACTURING 
2015
• MORE PRODUCT ZONES
•MORE FEATURES
STAND TODAY!
BOOK YOUR
Visit the NMW Sales Team
on Stand #2709or call (02) 9422 2568
 davido.extraxim@gmail.com