M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : JAGADEESH NEDURI
Employee ID :
Email Id : njagadeesh@mvgrce.edu.in
Mobile : 8500807594
Postal Address : 4-171, Jaggampeta, East Godavari Dist, 533435, AP
B. Education Details
S.No Qualification Board/University
1 M. Tech NIT Warangal
2 B. Tech JNTU Kakinada (GIET Rajahmundry)
3 Intermediate Narayana Jr. College (Secunderabad)
4 10th Z.P.H.S Talluru
C. Experience
S.No Institution Designation From To Experience
in years
1
CSIR- National
Metallurgical
Laboratory
(Jamshedpur)
Intern Jun 2014 Jun 2015 1
2
Prasidha College of
Engineering
(Amalapuram)
Assistant
Professor Jul 2012 April
2013 1
D. Professional Body Membership
Member in Society of Failure Analysis
E. Areas of Interest/Research Expertise
Materials science, Thermal, Coatings
F. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 Advances in
microscopic techniques
NIT Warangal M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : JOSHUA KUMAR SALADI
Employee ID : 1507010744
Email Id : joshuakumar@mvgrce.edu.in
Mobile : 9000460500
Postal Address : 1-450, Rayudupalem, Kakinada, East Godavari Dist, 533005, AP
B. Education Details
S.No Qualification Board/University
1 M.E ANDHRA UNIVERSITY
2 B. E ANDHRA UNIVERSITY
3 INTERMEDIATE ADITYA JUNIOR COLLEGE
4 10th SAWRWANI VIDYA NIKETHAN
C. Professional Body Membership
Member in Condition monitoring society of India
D. Areas of Interest/Research Expertise
CFD, Heat transfer, Energy systems
E. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 Machinery Condition
Monitoring-2013
Andhra University 14-03-13
2 Challenges & Latest Trends
in Nan composites
Andhra University 4-09-14
5-09-14M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : Gurugubelli Pramod kumar
Date of Birth : 24/06/1991
Employee ID : 1406140704
AADHAR No. : 609306846750
PAN : BIWPG8723M
P.F. Number : AP/31897/649
Email Id : pramodkumar@mvgrce.edu.in
Mobile : 9989318109
Postal Address : korlakota(village, post), amadalavalasa (mandal), srikakulam(dist)
Andhra Pradesh (state), 532185
B. Education Details
S.No Qualification Board/University
1 M-Tech NIT Warangal
2 B-Tech Andhra University
3 Diploma SBTET
4 10th SSC
C. Areas of Interest/Research Expertise
1) Welding (friction stir, Electron beam)
2) NDT
3)Advance Metal working M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : MEHER KRISHNA THATAVARTHI
Date of Birth : 02-08-1989
Employee ID : 1405300700
AADHAR No. : 671033156844
PAN : AVLPT9100E
P.F. Number : AP/31897/645
Email Id : tmk1989@gmail.com
Mobile : 9000837780
Postal Address : 64-6-6/b, Bangaruvari street, Pratap nagar, Kakinada-533004
B. Education Details
S.No Qualification Board/University
1 M.Tech GITAM University
2 B.Tech Pondicherry University
3 Intermediate Intermediate Board
4 10th SSC
C. Experience
S.No Institution Designation From To Experience
in years
1
Sri Sai Aditya Institute of
Science and Technology Asst.Professor 08-07-2013 07-02-2014 7 Months
2 Sri Sai Aditya Institute of
Science and Technology Asst.Professor 30-09-2010 04-07-2011 8 Months
D. Areas of Interest/Research Expertise
E. Administrative Role
S.No Name of the Committee Role
1 T&P Member
2 SAE Member M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : POTHALA SREENU
Date of Birth : 01-07-1991
Employee ID : 1405280699
AADHAR No. : 396303400722
PAN : CPMPP2257P
P.F. Number : AP/31897/644
Email Id : sreenupothala037@gmail.com
Mobile : 9640230040
Postal Address : s/o Ramu naidu, Mogalipurem(v), Sabbavaram(md), Visakhapatnam
pin:531035
B. Education Details
S.No Qualification Board/University
1 M.Tech(design&
Manufacturing) NIT Silchar
2 B.Tech (MECH) B.V.C Engg College
3 DIPLOMA(MECH) Govt.P.T. College,NRPM
C. Experience
S.No Institution Designation From To Experience
in years
1 MVGRCE Assistant
professor 28-06-12 27-10-14 (1/4) year
D. Areas of Interest/Research Expertise
PLM, STRUCTURAL ANALYSIS
E. Administrative Role
S.No Name of the Committee Role
1 Dept. library member FACULTY PROFILE
1. Name of Faculty : RamaKrishna Maddu
2. Date of Birth : 01-08-1988
3. Designation : Asst. Professor
4. Department : Mechanical Engineering
5. Date of Joining the Institution: 16-10-2013
6. Academic Performance
S.No. Name of the Course % of
Marks
Name of the School /
College Year Class Specialization
1 M.Tech Thermal
Engineering 7.9(CGPA) NIT
Warangal,Warangal(AP) 2011
2 B.Tech Mechanical
Engineering 70.1% Bapatla Engineering
College,Bapatla(AP) 2009
3 Intermediate M PC 91.7% Nalanda jr College(AP) 2005
4 SSC 87.5% Krishna Public School 2003
7. Experience

S.No.
Organization Designation Period Years of
experience
1
MVGR College of
Engineering Asst. Professor 16-10-2013 to
till date
1 years 5
months
2 Quest Global Ltd Engineer 25-07-2011 to
11-10-2013
2 years 2
months
Total Experience
S.No Teaching Industry Research Total
1 04 months 2+ years Nil 3.5 years
8. Papers published (Enclose the List)
S.No. Papers
Published
National International
Nil Nil Nil
FACULTY PROFILE
9. Papers presented in Conference (Enclose the List)
S.No. Papers Published National International
Nil Nil Nil
10.Ph.D Details
S.No. Ph.D Guide? Give
field & University
Field University
1 Nil Nil Nil
Ph.Ds / Projects Guided
S.No. Ph.Ds / Projects
Guided
Ph.Ds Projects at Masters
level
Nil Nil Nil
11.Books published / IPRs/Patents
S.No. Books published IPRs Patents
Nil Nil Nil
12.Professional Memberships (With registered date) : Nil
13.Awards (Enclose the details) : Nil
14.Grants fetched (Enclose the details) : Nil
15.Interaction with Professional Institutions : Nil
(Enclose the details)
16.Consultancy works done if any : Nil
(Enclose the details)
17.Conferences organized(Enclose the details) : Nil
Date: 10-03-2015 M RamaKrishna
FACULTY PROFILEM V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : MOHAMMED YOUSUF ALI
Date of Birth : 10 – 06 - 1985
Employee ID : 1310090666
AADHAR No. : 2215 2604 6504
PAN : CIXPM2598E
P.F. Number : AP/31897/610
Email Id : yousuf@mvgrce.edu.in
Mobile : 09059804810
Postal Address : Flat # 2, MiG 207, VIJAYASHANTI NIVASAM, PM PALEM, VIZAG
 530 041
B. Education Details
S.No Qualification Board/University
1 MS IIT MADRAS
2 BE OSMANIA UNIVERSITY
C. Experience
S.No Institution Designation From To Experience
in years
1 IIT MADRAS PROJECT
ASSOCIATE 2012 2013 1
2 TRR COLLEGE ASST PROF APR 2007 DEC 2007 .5
D. Areas of Interest/Research Expertise
THERMODYNAMICS, GAS DYNAMICS, PROPULSION, ELECTROHYDRODYNAMICS
E. Administrative Role
S.No Name of the Committee Role
1 TRANSPORT DEPARTMENT IN CHARGE Department of Training and
Placement, NIT Tiruchirappalli
620015
Telefax : +91- 431 2501081 email:
tp@nitt.edu,
tnp.nitt@gmail.com
NALLI MURALI KRISHNA
nallimuralikrishna
Male, Indian, 29,
27-4-8/1,nagavamshamstreet,dasannapeta,vizianagaram district.
Krishna@mvgce.edu.in
Contact :8331978192
PERSONAL DETAILS
● Father’s Name : N.Satyanarayana
● Date of Birth : 23rd, November, 1985.
● Linguistic Proficiency : English, Hindi, Tamil and Telugu.
 EDUCATION
Degree Year of
Passing
School/Institute Board/University Percentage/G
rade
M.Tech
(Industrial safety)
2012 National Institute of
Technology,Trichy
National Institute of
Technology-Trichy
7.61
B.Tech
(Mechanical)
2008 Kakatiya Institute of
Technology, Warangal
Kakatiya 67.33
Class XII 2003 S.R. Junior college for
boys, Warangal
Inter 87.9
Class X 2001 Vaniniketan high
school,Bellampalli,AP.
S.S.C 91
 PROJECT WORK
● UG: “Hierarchal parallel processing for design optimization”.
One popular method for increasing the efficiency of large scale design optimization is a
decomposition of problem into a number of sub-problems each with its own constraints and design
variable. Then each and every sub-problem is optimized by a powerful tool known as genetic algorithms
to get required optimal solutions. These solutions obtained from sub-problems are used to get the
required optimal solutions of large and complex design problems.
ACHIEVMENT: My project is being used as example for explaining the basic concept of genetic
algorithm.
● PG PHASE I: “Testing of industrial safety helmets as specified by IS-2925 by varying composition of 
Department of Training and
Placement, NIT Tiruchirappalli
620015
Telefax : +91- 431 2501081 email:
tp@nitt.edu,
tnp.nitt@gmail.com
used material”.
Industrial safety helmet is one of the most important personal protecting equipment which
prevents the workers head from falling objects striking the head. The materials used in fabrication of
helmet are fiber glass and roving fiber strands. By changing the composition of these materials and
testing for the improvement in properties like impact strength, water absorption and etc. as specified by
Indian Standard-2925 for helmet specifications.
PG PHASE II “Assessing safety functions (at BHEL’S SHOP floor) and risk assessment using analytic
hierarchal process and verifying the estimation of results”
The main objective is assessing the safety levels using safety function analysis and
conduct risk analysis over identified hazards by analytical hierarchal process. By this we can optimize
the safety levels at each and every step of risk assessment (identification of hazard, estimation of risk
and evaluation of risk)and can minimize the accidents.
● Industrial training/Internship
● Undergone FIRE SAFETYandFIRST AID RESCUE PROGRAM at NIT TRICHY for 2days.
● Undergone internship in SOUTHERN RAILWAYS CENTRAL WORKSHOP at PONMALAI.
● Conducted safety audit over various industries like CONCORD safety equipment PVT Ltd,
DALMIA cements etc.
● Observed and studied various safety aspects of TRICHY DISTILLARIES.
● Studied and understood various manufacturing processes at industries like M/S Renuka
plastics and M/S Vasanth tool crafts, Hyderabad as a part of industrial visit.
AREAS OF INTERESTS
● Safety management-Accident investigation, reporting and prevention.
● Fire engineering and explosion control.
● Human factors-motivation, ergonomic aspects
● Safety in material handling.
● Factories Act 1948.
SOFTWARE SKILL SET
● Languages : C
Department of Training and
Placement, NIT Tiruchirappalli
620015
Telefax : +91- 431 2501081 email:
tp@nitt.edu,
tnp.nitt@gmail.com
● Operating System : windows98,XP,vista
● Packages : AutoCAD, MS-word, MS-excel
 ACADEMIC ACHIEVEMENTS & CO-CURRICULAR Activities
● Got“PRATIBHA PURASKAR” from state government FOR EXCELLENCE IN S.S.C. .
● “BEST STUDENT” of intermediate 2003 batch.
● Got merit scholarship from college.
● Secured 2nd positionin paper presentation on “NANO TECHNOLOGY” conducted by JNTU,Hyderabad.
● Co-ordinated for MECHOVISION-2006, National level Mechanical Engineering Technical symposium.
● Conducted WHAT-IF ANALYSIS on construction site of CPWD-NITT presented a seminar.
 EXTRA CURRICULAR ACTIVITIES
● Successfully organized and executed 10 days Industrial tour for the department in 2007.
● Active member of Mechanical engineers association(MeA), student chapter.
● Industrial visit student co-ordinater forM.Tech(2010-2012) batch.
● Organized blood donation campaign our college in UG. and active blood donor.
● Participated in inter-college singing competitions.
● Worked as student helperin college library from 2006-2008.M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : Srinivas Badari
Date of Birth : 30-08-1988
Employee ID : 1302130629
AADHAR No. : 746178212809
PAN : DGOPS3127M
P.F. Number : AP/31897/570
Email Id : srinivas.badari @mvgrce.edu.in
Mobile : 8333088093
Postal Address : D NO 37-5-9/1, Sai ramnagar, Near kancharapalem police station,
Industrial estate, Visakhapatnam-7
B. Education Details
S.No Qualification Board/University
1 (Ph.D) Andhra University
2 M.Tech National Institute of Technology,TRICHY
3 B.E College of Engineering, GITAM
4 Intermediate Board of Intermediate
5 10th
 SSC
C. Experience
S.No Institution Designation From To Experience
in years
1 Bharati Shipyard
Limited
Assistant
Engineer 8-8-2012 10-02-
2013 1 ½
2 MVGR College of
Engineering
Assistant
professor
13-02-
2013 Till date 2
D. Areas of Interest/Research Expertise: Materials, Welding and Nano technology
E. Administrative Role
S.No Name of the Committee Role
1 Training and Placement Dept Incharge
2 Cultural Commitee Dept Incharge
F. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 Renewable Energy GMRIT Apr,2013
2 Nuclear Energy for
National Developement MVGR CE Jan 2014
3 Advances in
manufacturing process JNTU Vizianagaram Feb, 2014
4 PLM MVGRCE Mar 2014
5 Materiaux Andhra University Mar 2014
6 Elemental, compound
and phase analaysis by
powder X ray Diffraction
NIT Trichy Sep 2014 M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 3
A. Personal Details
Name in Full : Dr. YALLA MURALIDHARA CHANDRASEKHAR
Designation : Professor (Vice-Principal, Academics)
Date of Birth : 18.09.1969
Employee ID : 9812010058
Email Id : ymcsekhar@mvgrce.edu.in
vpac@mvgrce.edu.in
Mobile : +91-9440018657
Address : Plot No 9, Engineers Colony,
VT Agraharam, Vizianagaram -535005.
B. Education Details
S.No. Name of the Course Name of the School /
College
Ph.D
Class Specialization (Specialization)
1 Ph.D Andhra University,
Visakhapatnam
ALTERNATE
FUELS
2 M.E Industrial
Engineering
Andhra University,
Visakhapatnam
3 A.M.I.E Mechanical Engg
The Institution of
Engineers (INDIA)
Calcutta
C. Experience

S.No.
Organization Designation Period Years of
experience
1
Sri Krishna
Automobiles
Mechanical
Supervisor 1987-1990 03
2
MVGR College of
Engineering
Asst.Prof. 1998-2006 08
3
MVGR College of
Engineering
Sr. Asst.Prof 2006-2007 01
4
MVGR College of
Engineering Assoc.Prof 2007-2010 03
5
MVGR College of
Engineering Professor 2010 to Till Date 5
D. Professional Body Membership
1. Institute of Engineers
2. Indian Society for Technical Education
3. Condition Monitoring Society of India
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 3
E. Areas of Interest/Research Expertise:
 Alternate Fuels
 Condition Monitoring
 Automobile Engineering
 Operations Research
 Vibrations
F. Journal Publications:
1. “Effects of Compression Ratio and EGR on Performance, Combustion and
Emissions of DI Injection Diesel Engine” International journal of Applied
science and engineering,Vol.11,No.1,pp43-51.
2. A Paper titled Experimental investigations of Performance and emission
characteristics of A CI engine Fueled with Soybean bio diesel” International
Journal of Current research and review” Vol.4(9) ,pp36-44
3. “Performance and emission studies on DT diesel engine fueled with
pongamia methyl ester injection and methanol carburetion”, JESTEC –
Malaysia, Volume 5,
4. “Bio Diesel as a alternate fuel in a diesel engine with the cooled exhaust gas
recirculation-A measure to reduce harmful emissions”, IJARME, Volume 1,
2011, pages 10-15.
G. Conference Publications:
1. “Experimental investigations of Performance and emission characteristics of
A CI engine Fueled with Soybean bio diesel” International Journal of Current
research and review” Vol.4(9) May 2012,pp36-44.
2. “Experimental study of various effects of exhaust gas recirculation (EGR) on
Performance, Combustion and emission characteristics of VCR Diesel
engine” at proceedings of International Conference on Recent Advances in
Mechanical Engineering (INCRAME-2011) at MGR University, Chennai, April
21-22, 2011.
H. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1
FDP on “Product Life
Cycle Management” MVGRCE 20th June 2014
2
Two day National Work
shop on Nuclear Energy
for National
Development by BARC.
M V G R College of
Engineering 23rd & 24th Jan 2014
3
Two day work shop on
“New trends in
Manufacturing – an
industrial Perspective”.
MVGRCE 8
th and 9th July 2013
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 3
5
One Day National
Workshop on “Product
Life Cycle Management”
M V G R College of
Engineering 7
th Jan 2012
6
Artificial Intelligence
Techniques in
Engineering
Applications – 2011
M V G R College of
Engineering,
Vizianagaram
17th to 18th Dec’11
7
Integrated
computational
Methodologies in
Mechanical Engineering
Systems
M V G R College of
Engineering,
Vizianagaram
25th May to 6th June’09
8
Manufacturing and
Characterization Issues
in Nano tubes
GMR institute of
technology, Rajam
2
nd
– 6
th February’09
9
An Introduction to MAT
LAB and Its applications
M V G R College of
Engineering,
Vizianagaram
2
nd Sept’ 08
10
Mathematical
Techniques and Their
Applications to
Engineering and
Physics Problems
M V G R College of
Engineering,
Vizianagaram
23-24th May’ 08
11
Instructional Design and
Delivery
M V G R College of
Engineering,
Vizianagaram
19 - 21st May’ 08
12
Computer Applications
in Solids, Fluids and
Thermal Science
MVGR College of Engg.
Vzm.
23rd & 24th March,
2007M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : Pavan Kumar K
Date of Birth : 28-08-1987
Employee ID : 1212050615
AADHAR No. : 268555535680
PAN : BSGPK9306N
P.F. Number : AP/31897/555
Email Id : kpavan@mvgrce.edu.in
Mobile : 7893525034
Postal Address : S/o Kurella Ramarao (Teacher), Puritipenta new colony,
Gajapathinagaram, Vizianagaram-535270
B. Education Details
S.No Qualification Board/University
1 M. Tech Bijupatnaik University of Technology
2 B Tech JNTU H
3 Intermediate Board of Intermediate
4 10th
 SSC
C. Experience
S.No Institution Designation From To Experience
in years
1 MVGR College of
Engineering
Assistant
professor
13-02-
2013 Till date 2
D. Administrative Role
S.No Name of the Committee Role
1 Training and Placement Dept Incharge
2 NCC/NSS Dept Incharge
E. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 MATLAB for Engineering
Applications
MVGRCE Sep 2013
2 Nuclear Energy for
National Developement MVGR CE Jan 2014
3 Advances in
manufacturing process JNTU Vizianagaram Feb, 2014
4 PLM MVGRCE Mar 2014 M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : GORIPARTHI.VEERAIAH
Date of Birth :20-08-1989
Employee ID :1208130609
AADHAR No. :784926843815
PAN : BGPPG2745E
P.F. Number : AP/31897/549
Email Id :veerumech307@gmail.com
Mobile : 9985764974
Postal Address : krapa post,kollur mandal,Guntur District,522324
B. Education Details
S.No Qualification Board/University
1 (Ph.D) Andhra University
2 M.Tech Gitam University
3 B.Tech JNTUK
4 Diploma SBTET
5 SSC BOSE
C. Experience
S.No Institution Designation From To Experience
in years
1 M.V.G.R.CE Asst.Proff 12-08-
2012 Till date 2.5
D. Areas of Interest/Research Expertise
E. Administrative Role
S.No Name of the Committee Role
1 Department Examination cell In charge
F. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 BARC M.V.G.R.CE 01-2014
2 PLM M.V.G.R.CE 03-2014 M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 1
A. Personal Details
Name in Full : MADATALA YERNI PRASADA RAO
Date of Birth : 01/07/1980
Employee ID : 1206140592
AADHAR No. : 512901420021
PAN : APLPP4670B
P.F. Number : AP/31897/534
Email Id : myprasad@mvgrce.edu.in
Mobile : 9492929166
Postal Address : near police station, jami post, vizianagaram dist, PIN: 535250
B. Education Details
S.No Qualification Board/University
1 ME(CAD/CAM) A.U
2 B Tech N.U (VRSEC,Vijayawada)
3 Diploma SBTET, AP
4 SSC BSE,AP
C. Experience
S.No Institution Designation From To Experience
in years
1 MVGRCE Asst.prof 2012 Till
Continued 2.5
2 RAGHU Asst.prof 2011 2012 1
3 TPIST Asst.prof 2005 2008 3
D. Professional Body Membership
E. Areas of Interest/Research Expertise
F. Administrative Role
S.No Name of the Committee Role
1 Dept examination cell In-Charge
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 PLM MVGRCE, VZM March, 2014
2 Nuclear energy for
national development. MVGRCE, VZM Jan’ϮϬϭ4FACULTY PROFILE
1. Name of Faculty : JYOTHIRMAI SRINATHU
2. Date of Birth : 30-08-1987
3. Designation : ASST.PROFESSOR
4. Department : MECHANICAL
5. Date of Joining the Institution: 18-05-2012
6. Academic Performance
S.No.
Name of the Course % of
Marks
Name of the
School /
College
Ph.D
Class Specialization (Specialization)
1 INTERMEDIATE M.P.C 91.1
SRI
CHAITANYA
COLLEGE
NIL
2 BTECH MECHANICAL 78.48
MVGR
COLLEGE
OF
ENGINEEING
NIL
3 MTECH MACHINE
DESIGN 87.5
MVGR
COLLEGE
OF
ENGINEEING
NIL
7. Experience

S.No.
Organization Designation Period Years of
experience
1
JNTU
VIZIANAGARAM LECTURER 27-09-2008 TO
18-11-2009 1.2
2
MVGR COLLEGE
OF ENGINEEING JRF 19-11-2009 TO
17-05-2012 2.5
3
MVGR COLLEGE
OF ENGINEEING
ASST.
PROFESSOR
18-05-2012 TO
TILL DATE 1.8
Total Experience
S.No Teaching Industry Research Total
1 3 - 2.5 5.3
8. Papers published (Enclose the List)
S.No. Papers
Published
National International
1 8 1 7
FACULTY PROFILE
9. Papers presented in Conference (Enclose the List)
S.No. Papers Published National International
1 2 0 2
10.Professional Memberships (With registered date): NIL
11.Awards (Enclose the details) : NIL
12.Grants fetched (Enclose the details) : NIL
13.Interaction with Professional Institutions: ATTEND FOR GUEST LECTURES IN
GOKUL COLLEGE FOF ENGINEERING , BOBBILI(Enclose the details)
14.Consultancy works done if any :NIL
(Enclose the details)
15.Conferences organized: NIL
(Enclose the details)M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGG
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 3
A. Personal Details
Name in Full : RAJESH GUNTUR
Date of Birth : 15-07-1985
Employee ID : 1111150574
P.F. Number : GRVSP00318970000000516
Email Id : stanlyrajesh@mvgrce.edu.in
Mobile : 9885635037
Postal Address: C/o B Surappadu, D.No: 19-7-5A, Devinilayam, Lanka street,
Vizianagaram. Pin: 535002
B. Education Details
S.No Qualification Board/University
1 SSC BSE, A.P.
2 DAE SBTET, A.P.
3 B.Tech JNTU Hyderabad
4 M.Tech(A.I.C.E.) JNTUA Anantapur
5 Ph.D JNTUA Anantapur
C. Experience
S.No Institution Designation From To Experience
in years
1
Maharaj Vijayaram
Gajapathi Raj College of
Enginering, Vizianagaram
Assistant
Professor
15-11-
2011
Till
Date
3 years
2
St. Ann’s College of Engg.
and Tech., Chirala.
Assistant
Professor
01-07-
2011
14-11-
2011
4 months
3
St. Ann’s College of Engg.
and Tech., Chirala.
Assistant
Professor
11-06-
2008
07-11-
2009
1 ½ Year
D. Professional Body Membership
E. Areas of Interest/Research Expertise
I.C. Engines, Alternative fuels/ 2 Years
F. Administrative Role
S.No Name of the Committee Role
1 Department Library Member
2 Attendance Committee member
3 Industry visit committee member
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1.
Faculty Development
Programmes
Maharaj Vijayaram
Gajapathi Raj College of
Engineering,
Vizianagaram, A.P
30-May-2014
PHOTO
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGG
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 3
2. International
Conference on Recent
Advances in Mechanical
Engineering and
Interdisciplinary
Developments
(ICRAMID-2014)
Ponjesly College of
Engineering, Nagercoil 7-8 March, 2014
3. International
Conference on Recent
Advances in Mechanical
Engineering and
Interdisciplinary
Developments
(ICRAMID-2014)
Ponjesly College of
Engineering, Nagercoil 7-8 March, 2014
4. National Conference On
Recent Trends In
Mechanical Engineering
(NCRTME-2014)
M.R.A.G.R. Government
Polytechnic, Poolbagh,
Vizianagaram,
7-8 March, 2014
5. Two Day National
Workshop
MVGR College of
Engineering,
Vizianagaram
23rd
 and 24th

Jan’2014
6. An In-House Training
Program
MVGR College of
Engineering,
Vizianagaram
September 02nd to
September 06th, 2013.
7. International
Conference on
Alternative Fuels For I.
C. Engines (ICAFICE
2013) ISBN:978-81-
924029-8-7
Malaviya National
Institute of Technology,
Jaipur, Rajasthan
6-8 February, 2013
8. A short-Term Training
Program
MVGR College of
Engineering,
Vizianagaram
30th May to 2nd
June,2012
9.
Staff Development
Programme
Aditya Institute of
Technology &
Management (AITAM),
Tekkali, Srikakulam
March 30-31, 2012
10. National Conference On
Recent Trends In
Mechanical Engineering
(RETREME - 2K12)
St. Ann’s College of
Engineering &
Technology, Chirala
10-02-2012
11. National Conference On
Recent Trends In
Mechanical Engineering
(RETREME - 2K12)
St. Ann’s College of
Engineering &
Technology, Chirala
10-02-2012
12. National Conference On
Recent Trends In
Mechanical Engineering
(RETREME - 2K12)
St. Ann’s College of
Engineering &
Technology, Chirala
10-02-2012
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGG
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 3
13. One Day National
Workshop
MVGR College of
Engineering,
Vizianagaram
07-01-2012
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1. Effect of Compression
Ratio on Performance
and Emission
Characteristics of VCR
Diesel Engine Using
Mahua Methyl Ester
International Journal of
Mechanical Engineering
and Material Sciences
(IJMEMS) ISSN: 0974-
584X
Jan-June 2014
2. Performance and
Emission Characteristics
of Diesel Engine Fueled
with Sesame Oil Methyl
Ester Blends
International Journal of
Current Research and
Review (IJCRR), ISSN
0975-5241
Oct 2012
3. Experimental
Investigations of
Performance and
Emission Characteristics
of a C.I Engine fueled
with Soybean Biodiesel
International Journal of
Current Research and
Review (IJCRR), ISSN
0975-5241
May 2012
4. Performance and
Emission Characteristics
of a Slow Speed Diesel
Engine Fueled with
Soybean Biodiesel
International Journal of
Emerging Technology
and Advanced
Engineering(IJETAE),
ISSN 2250-2459
Apr 2012
5. Performance and
Emission Characteristics
of C.I Engine Using
Waste plastic pyrolysis
oil- Diesel blends
International Journal of
Current Research and
Review (IJCRR), ISSN
0975-5241
August 2011
6. Experimental Evaluation
of A Diesel Engine With
blends of Diesel-Plastic
Pyrolysis oil
International Journal of
Engineering Science and
Technology (IJEST), ISSN
: 0975-5462
June 2011M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : satyanarayana gogula
Date of Birth : 15-08-1982
Employee ID : 1109020565
AADHAR No. : 598393673430
PAN : BJBPS2002M
P.F. Number : AP/31897/507
Email Id : satyanarayanagogula@mvgrce.edu.in
Mobile : 09985066834
Postal Address : 9-5-26, A.U.Post peethalavani palem , beside sivalayam
B. Education Details
S.No Qualification Board/University
1 Ph.D(pursuing) Andhra university
2 M.Tech GITAM
3 B.Tech Jntu hyderabad
C. Experience
S.No Institution Designation From To Experience
in years
1 MVGR COLLEGE ASST
PROFESSOR 2011 TILL DATE 03
2 ITD CEM INDIA
LIMITED ENGINEER 2007(JAN) 2008(AUG) 1.5
3 ANNAPURNA
CONSTRUCTIONS ENGINEER 2005(JUNE) 2007(DEC) 1.5
D. Professional Body Membership NIL
E. Areas of Interest/Research Expertise
COMPUTATIONAL FLUID DYNAMICS, NANO TECHNOLOGY, GENETIC ALGORITHMS,
ROBOTICS
F. Administrative Role
S.No Name of the Committee Role
1 MAINTENANCE DEPARTMENT INCHARGE
2 ANTI RAGGING MEMBER 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 BARC OUT REACH
PROGRAM
MVGR 23-01-2014
2 PLM-PDM MVGR 20-05-2014
3 ADVANCES AND
APPLICATIONS OF CFD
JNTU KAKINADA 12-04-2014
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1 CFD ANALYSIS OF CD
NOZZLE
ANNALS OF
ENGINEERING
2013
2 FUNDAMENTAL
FREQUENCY OF DOUBLE
WALLED CARBON NANO
TUBES WITH DIFFERENT
BOUNDARY
CONDITIONS
2013M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : B. Madhava Varma
Employee ID : 1107070554
Email Id : madhavvarma@mvgrce.edu.in
Mobile : 9866142339
Postal Address : Plot no:21, P.V.R.Colony,
 near Padmavathi Nagar, Vizianagaram
B. Education Details
S.No Qualification Board/University
1 SSC Arunodaya Residential school
2 Intermediate M.S.N Jr College
3 BE S.R.K.R Engg College(AU)
4 M Tech JBIET(JNTUH)
5 Pursuing Ph. D JNTUA Anantapur
C. Experience
S.No Institution Designation From To Experience
in years
1 C. M. R.College of
Engg & Technology Asst Professor Nov,2006 Oct, 2009 3
2 M. V. G. R College of
Engg Asst Professor July,2011 Till date 3 Yr
4months
D. Professional Body Membership
MISTE
E. Areas of Interest/Research Expertise
Alternate fuels & condition monitoring
F. Administrative Role
S.No Name of the Committee Role
1 E Services Member
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 A One Day Workshop on
Product Life Cycle
Management
M.V.G.R.C.E 7
th Jan,2012
2 A Two Day Workshop on
C.F.D
AITAM, Tekkali 30th
-31st,Mar
2012
3 A Two Day Workshop on
Nuclear Energy for National
Development
M.V.G.R.C.E 23rd
-24th, Jan
2014
4 Experimental Investigation
of Performance, Emission &
Vibration Characteristics of
a CI Engine Fuelled With
Soybean Methyl Esters
International Conference
on Alternate Fuels, MNIT,
JAIPUR,2013
Jan, 2013. 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
5 Vibration Analysis of Diesel
Engine Fuelled With Neem
Methyl Ester Blends
International Conference
on Mechanical Engineering
(ICME-2014) VVIT,
Bangalore. (Published by
Elsevier India pvt ltd)
21st
 -23rd
August 2014
6 Performance,Combustion
& Emission Analysis of
Diesel Engine Fuelled with
Neem Methyl Ester Blends
International Conference
on Mechanical Engineering
(ICME-2014) VVIT,
Bangalore. (Published by
Elsevier India pvt ltd)
21st
 -23rd
August 2014
b. Publications in National/International Journals/Books
S.No Title Journal Date of
Publication
1 Experimental Investigation
of Performance And
Emission Characteristics of
Diesel Engine Fuelled With
Linseed Bio Diesel
International Journal of
Current Research & Review(
IJCRR) :June 2013/ Vol 05 (12)
Page 125-133
June 2013
2 Condition Based
Maintenance (CBM)
Through Vibration
Spectrum Analysis For
Improving The Reliability of
B-1 Conveyor (DIVE542)&
Diagnosis of Fault Through
Vibration Spectrum
Analysis Technique
International Journal of
Innovative Technology and
Exploring Engineering (IJITEE)
ISSN: 2278-3075, Volume-2,
Issue-2, January 2013, Page
58-62
January 2013
3 Bending Behavior of
Aluminum Honey Comb
Sandwich Panels
International Journal of
Engineering and Advanced
Technology (IJEAT) ISSN: 2249
– 8958, Volume-1, Issue-4,
April 2012, Pg268-272
April 2012
c. Research & Development / Consultancy works undertaken
S.No Title Funding Organization Duration
1 Vibration analysis of
multi fuel VCR engine
using non edible oils
UGC, Ref: 4-4/2013-14(MRP -
SEM/UGC-SERO)
 2 Yrs
d. Certification Courses
S.No Title Offered by Duration
1 MATLAB for Engg
Applications
 MVGRCE 2
nd -6th , Sep 2013 M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : VARUN CHEBROLU
Date of Birth : 03/03/1986
Employee ID : 1102180536
AADHAR No. : 331701619893
PAN : AKHPC4864D
P.F. Number : AP/31897/479
Email Id : varunchebrolu@mvgrce.edu.in
Mobile : +91-949-20-21-22-3
Postal Address : DNO: 8-18-1-20, MAYUR PALACE – FLAT-F1, PRADEEP NAGAR,
 VIZIANAGARAM – 535004.
B. Education Details
S.No Qualification Board/University
1 (Ph.D) Andhra University
2 M.Tech GITAM University
3 B.Tech JNTUK
4 Intermediate B.O.I
5 SSC B.O.S.E
C. Experience
S.No Institution Designation From To Experience
in years
1 Dharti Dredging &
Infrastructure Ltd.
Maintenance
Engineer Aug 2007 Mar 2008 8 Months
2 MVGRCE Asst. Prof. 24/02/2011 Till date 3 Y 8 M
D. Professional Body Membership - NIL
E. Areas of Interest/Research Expertise:
 Integrated vehicle health monitoring
 Robotics
 Computer Integrated Manufacturing
F. Administrative Role
S.No Name of the Committee Role
1 Website Member
2 Alumni Member
3 Robotics Club In-Charge
4 Photography club Convener
5 Cultural and Sports Member 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
6 Student activities (Dept.) Member
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1
FDP oŶ ͞Product Life Cycle
MaŶageŵeŶt͟ MVGRCE 20th June 2014
2
Two day National Work
shop on Nuclear Energy
for National Development
by BARC.
M V G R College of
Engineering
23rd & 24th Jan 2014
3
Two day work shop on
͞Neǁ treŶds iŶ
Manufacturing – an
iŶdustrial Perspectiǀe͟.
MVGRCE 8
th and 9th July 2013
4
One day workshop on
͞Machinery condition
ŵoŶitoriŶg͟
Andhra University 14th march 2013
5
One Day National
Workshop oŶ ͞Product
Life Cycle MaŶageŵeŶt͟
M V G R College of
Engineering 7
th Jan 2012
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1
Fundamental Natural
Frequencies of DoubleWalled
Carbon With
Different Boundary
Conditions
IJERT Volume 1, Issue
10(December – 2012)
2
Design and dynamic
couple field analysis of
engine cylinder fins
IJERT November 2013
c. Research & Development / Consultancy works undertaken - NA
d. Certification Courses
S.No Title Offered by Duration
1 CREO for Industrial
Designers PTC INDIA 14 Days M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : SANYASI NAIDU SUREDDI
Date of Birth : 27/08/1983
Employee ID : 1006070505
AADHAR No.:
PAN : DHIPS9493B
P.F. Number : AP/31897/452
Email Id : ssnaidu@mvgrce.edu.in
Mobile : +91-8019507122
Postal Address : DNO:8-145, Alamanda(Village), Jami (Mandalam),
 VIZIANAGARAM – 535240.
B. Education Details
S.No Qualification Board/University
1 (Ph.D) Andhra University
2 M.E Andhra University
3 B.Tech JNTUK
4 Intermediate B.O.I
5 SSC B.O.S.E
C. Experience
S.No Institution Designation From To Experience
in years
1 Synergies Castings
Ltd. GET June 2006 Dec 2006 7 Months
2 MVGRCE Asst. Prof. 07/06/2010 Till date 4Years 4
Months
D. Professional Body Membership – NIL
E. Areas of Interest/Research Expertise:
 Integrated vehicle health monitoring
 Composites
 Nano Technology
F. Administrative Role
S.No Name of the Committee Role
1 Examination section Member
2 Alumni Member 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1
FDP oŶ ͞Product Life
Cycle MaŶageŵeŶt͟ MVGRCE 20th June 2014
2
Two day National Work
shop on Nuclear Energy
for National
Development by BARC.
M V G R College of
Engineering
23rd & 24th Jan 2014
3
International Work shop
oŶ ͞ MECHATRONIC“
AND ROBOTICS
VEL TECH TECHNICAL
UNIVERSITY
4
th to 8th July 2012
4
One day workshop on
͞MachiŶery coŶditioŶ
ŵoŶitoriŶg͟
Andhra University 14th march 2013
5
One Day National
Workshop oŶ ͞Product
Life Cycle MaŶageŵeŶt͟
M V G R College of
Engineering 7
th Jan 2012
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1
Fundamental Natural
Frequencies of DoubleWalled
Carbon With
Different Boundary
Conditions
IJERT Volume 1, Issue
10(December – 2012)
2
͞DesigŶ aŶd Therŵo
Mechanical Analysis of
High Pressure Vessels
with Dish EŶd͟
IJARST Volume 2, Issue2,
2013, pp 67-73
c. Research & Development / Consultancy works undertaken - NA
d. Certification Courses
S.No Title Offered by Duration
1 CREO for Industrial
Designers PTC INDIA 14 Days M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 4
A. Personal Details
Name in Full : Ajay Konapala
Date of Birth : 24-06-1981
Employee ID : 0904290454
Email Id : ajay.konapala@gmail.com
Mobile : 9502092248
Postal Address: D.No:9-104, Simhachalam, Vizag, AP-530028
B. Education Details
S.No Qualification Board/University
1 M.E Andhra University
2 B.E Andhra University
3
Pursuing Ph.D in part
time Andhra University
C. Experience
S.No Institution Designation From To Experience
in years
1
MVGR College of
Engg Asst.Prof Apr2009 Till now 4 yrs 7
months
2
Tata Consultancy
Services ASE Feb2005 Apr2009 4 yrs 2
months
D. Professional Body Membership
SAE
E. Areas of Interest/Research Expertise
CAD/CAM, SIM
F. Administrative Role
S.No Role Period Deliverables to the College Contributions to college
1
CIID
Coordinat
or
Since Sep
2009, till
now
(5 years)
 PTC ATC
 Course Structures/Material
 PTC Certified trainers at
MVGR
 PTC Certified Students
 Placement assistance
 MVGR Certification for
students on
AutoCAD, ANSYS,
WINDCHILL PDM LINK
 Finances
 Presentations/Brochures to
Industries
 Maintaining Relations with
suitable industries
MOU with PTC to become
Authorized Training
Center, Conducting
certification courses on
advanced CAD
applications to Students,
Conducting special
placement drives and
supporting placement cell
during discussions over
skill based trainings or for
related MOUs.
2
In-Charge,
T&P
2011-13
(2 years)
 Student Master Data
 Companywide tracker
 Online registrations
Students would be
trained to make them
industry ready so as to 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 4
 Attending college meetings
 Conducting training(online,
classroom) programs
 Monitoring attendance
 Conducting placements
 Maintaining file with all
documents including offer
letters
get placed in various
companies before
actually getting released
from the college.
3
In-Charge,
E-Services
2010-12
(2
years)
 Department E-Hardware &
Software details
 Maintenance of systems and
related issues
 Network issues resolution
 Attending for college
meetings
Goal of this committee is
to maintain E-Hardware
& Software along with
licenses and to make sure
that the utilization of the
E-Facilities are upto the
mark and giving good
results
4
In-Charge,
Entrepren
eurship
Developm
ent Cell
2009-12
(3
years)
 Interested Student data over
EDC
 Confederation of Indian
Industry (CII)interactions
 EDC Seminars by eminent
persons.
Impart training and
promote entrepreneurial
qualities among technical
graduates and other
interested public
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 FDP on ICMMES MVGR COE May 2012
2 Integration of Design
Analysis and Estimation
into a Web-Based
Product Lifecycle
Management Platform
International
Conference on
Manufacturing
Excellence (MANFEX
2012)
Nov 2012
3 FDP on EIS, PLM,PDM by
TCS
MVGR COE May 2014
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1 Fabrication and
Characterization of PPS
/40%GF/nano-CaCo3
Hybrid Composites
International Journal of
Modern Engineering
Research (IJMER)
Issue. 4, July-august.
2013 pp-2262-2266
ISSN: 2249-6645
2 Vibration Response of
Rotor-Bearing seal
system subjected to
Non-Linear parametric
Excitations
An International Journal
(ESTIJ)- IRACST –
Engineering Science and
Technology
ISSN: 2250-3498,
Vol.2, No. 4, August
2012
3 Performance, International Journal of Volume 2 No. 7, July, 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 4
Combustion and
Emission of a PKME
Fuelled DI-Diesel Engine
with Exhaust Gas
Recirculation
Engineering and
Technology
2012
c. Certification Courses
S.No Title Offered by Duration
1 6-Sigma Green Belt
Certified Professional
GE 6 months
2 PTC Certified
Professional Trainer on
PRO-E Basic
PTC 80 hrs
3 PTC Certified
Professional Trainer on
PRO-E Advanced
PTC 80 hrs
4 SIEMENS Certified
Professional on PLC
Automation
SIEMENS 40 hrs
d. Others
Awards
 ‘Overall Process Excellency award for the year 2012’ by PTC (Parametric
Technology Corp) at Annual ATC summit on Jul2012
 ‘TCS Gems’ award in the year 2008
Workshops / Training Programs in MVGR
1. Attended
S.No Workshop/Training Details Host
Institution
Month and
Year
Sponsor
Details
1 SIEMENS training on PLC
Automation (6days)
SIEMENS Jun,2014 MVGR COE
2 BARC Outreach program- 2
day workshop
MVGR COE Feb,2014 MVGR COE
3 2 Day National workshop on
trends in manufacturing
industrial perspective by
Prof. P.N.Rao
MVGR COE 8,9th July,2013 MVGR COE
4 National Workshop on PLM-
2012
MVGR COE 7
th Jan, 2012 MVGRCOE
5 Seminar on Windchill by
Adroitec Team
MVGR COE Mar,2011 (2
Day)
Adroitec
6 Seminar by Prof Raghu
Echempati
MVGRCOE Dec’10 ( 2 Day
)
MVGRCOE
7 Nono Technologies &
CAD/CAM seminars By DR
PN Rao
MVGRCOE July’10 ( 2 Day
)
MVGRCOE
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 4 of 4
8 Gear Grinding and Research
Project
MVGRCOE July’10 (1 Day
)
MVGRCOE
9 Teaching & Research &
Methodologies
MVGRCOE July’10 (1 Day
)
MVGRCOE
10 Pro E Certification for
Faculty
PTCBangalore
June ’10 (1
Week)
MVGRCOE
2. Conducted
S.No Workshop/Training/Semin
ar/Conference Details
Month and
Year
Role
1 Windchill PDM Link Faculty
Training
July,2014 Coordinator & Resource
Person
2 BARC Outreach program- 2
day workshop
Feb,2014 Coordinator
3 Training on new features on
CREO 2
Aug-2013 Organizer
4 Windchill 9.1 Apr-2012 PTC Authorised Trainer
5 Pro-E Wildfire - Basic Aug-2011 PTC Authorised Trainer
6 National Workshop on PLM-
2012
Jan-2012 Organizer
7 Nono Technologies &
CAD/CAM seminars By DR
PN Rao
July-10 Organizer
8 ICCMES-FDP June-2009 Program Organizer & CoEditor
of ProceedingsPERSONAL PROFILE
Umamaheswara Raju R. S
D.No: 55-14-102
New P & T Colony, E-Mail: sagimahes@gmail.com
Sethammadhara maheshraju@mvgrce.edu.in
Visakhapatnam-530013, Mobile: 09000049006
Andhra Pradesh.
Name: Umamaheswara Raju. R. S
Exact designation: Assistant professor
Date of joining: 3-09-2007
Appointment Type: Regular
Department: Mechanical
Qualifications: UG-B.Tech (Mechanical), PG - M.Tech (CIM) &
Perusing (Ph.D)
Experience in years: Teaching-8years
Date of Birth: 16 December 1981
Gender: Male
Employee ID: 07MEF3127
Blood Group: O+ve
P.F. Number: AP/31897/322
Present Address : MIG-128, NE LAYOUT, seetammadhara,
Visakhapatnam-13.
Permanent Address : 55-14-102, NEW P& T Colony,
seetammadhara, Visakhapatnam-13
Institutional email address- maheshraju@mvgece.edu.in
Field of study / specialization: Computer Integrated Manufacturing
Publications:
(1)“SVM- GA Based Reverse Mapping Methodology to Identify Cutting
Parameters for a Given Surface Finish in End Milling”- Global Trends and
Challenges in Design and Manufacturing- proc. Of the 3rd intl. & 24th AIMTDR
Conf.2010.
(2)“Comparative Study On The Performance, Combustion And Emission Of A
DI-Diesel Engine Tested With Methyl Esters Of Jatropha And Palm Kernel Oils 
With Cold EGR Technique Implementation”. Journal of Engineering Research
and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol. 2, Issue4, JulyAugust
2012, pp.1881-1888.
(3) “Design Optimization in Bolt-Nut Fasteners to Reduce Stress Concentration”
International Journal of Multidisciplinary Educational Research (IJMER), March
2013, Issue: III, Vol: II.
(4) “Machine Vision System for Predicting Surface Finish in Surface Grinding
Process”, International Colloquium on Materials, Manufacturing and Metrology,
page: 353-354, ICMMM 2014August 8-9, 2014, IIT Madras, Chennai, India.
Memberships of professional bodies: AM IE,MISTE
Professional activities:
Preparing lesson plans and teaching classes; Encouraging
students in their studies and evaluating student work and
progress; supervising students behavior and maintaining
classroom discipline; Demonstrating good citizenship and respect
for all groups of people; and acting as teacher-advisers for
students. Helping students complete their annual education plans
monitoring their performance and progress toward their career
goals.
Departmental member for committees like:
EDC CELL- Giving a helping hand and encouraging students by
providing necessary information on finance agencies, entrepreneur
registrations and providing guest lecture for the students to enhance
their entrepreneur skills.
MVGR BULLITEIN- Helped in getting 4 successive bulletins for MVGR
Workshops / Training Programs :
Sl.No Workshop/ Training Details Host Institution Date
1 Basic automation SIEMENS, Mumbai 16-21June
2014
2 PLM and Engineering
Automation
TCS 29-30 May
2014
3 BARC-OUTREACH PROGRAM MVGRCE, VZM 23-24 Jan
2014
4 Research Methodologies JNTUK, Kakinada 1-15th May -
2013
5 Intellectual Property Rights JNTUK, Kakinada. 15-30th MAY
- 2013
6 PLM MVGRCE, VZM. 7 JAN 2012
7 “AI” Techniques in Engg.
Applications-2012
MVGRCE, VZM. 17-18 Dec
2011
8 High Impact Teaching Skills,
Wipro Mission 10X.
MVGRCE, VZM. 24-25 OCT
2011
9 FDP on Entrepreneurship MVGRCE, VZM. 18-30 April
2011
10 Training on CNC gear Grinding
and Gear Hobbing
Aeromech Technologies
(pvt)Ltd, Bangalore
28 Aug- 5
Sep 2011
11 Teaching and research
Methodologies by Dr.P N Rao
MVGRCE, VZM. 19
July2010
12 Integrated Computational
methodologies in mechanical
engineering systems
MVGRCE, VZM. 25 May- 6
June 2010
13 Introduction to quality and
taguchi methods
MVGRCE, VZM. 4-9 July
2010
14 Instructional design and delivery
systems
NITTTR-CHENNAI,
MVGRCE, VZM
19-21 may
2010
15 STTP on Mechatronics Institution of
engineers(India), Hyd.
16-20 June
2008
16 Advanced technical training on
CNC
IGIAT VSP 1-5 July
2008
Programming and machining MVGRCE, VZM. 24-19 Nov
2008
Industrial Visits:
S.No. Name of Industry Place Month & Year of
Visit
1 Steel Plant VIZAG September, 2010
2 Askar microns(2 Times) Mysore December, 2010
3 Aeromech technologies Bangalore November, 2010
4 BEML Kolar November,2010
5 TMT Bangalore May, 2010
6 Leihber Bangalore May 2010
7 EASUN MR Chennai November 2012
8 GREAVES COTTON Chennai November 2012
9 LUCAS TVS Chennai November 2012
10 AQUA TEXMO PUMP INDUSTRIES Coimbatore November 2012
11 Nuclear Fuel Complex Hyderabad May, 2014
12 SIEMENS Mumbai June,2014

Personal Details
Name in Full : MANDRU ANIL PRAKASH
Father’s Name : M.KARUNAKAR
Date of Birth : 25-12-1975 Gender : Male
Employee ID : 0707160345 Blood Group : O+ve
P.F. Number : AP/31897/314
Email : ap_mandru@yahoo.co.in Mobile : 9491837815
Present Address : MIG-III/35, PHASE – I, VUDA COLONY
 CANTONMENT, VIZIANAGARAM-535003
Permanent Address : MIG-III/35, PHASE – I, VUDA COLONY
 CANTONMENT, VIZIANAGARAM-535003
Institutional email address - ap.mandru@mvgrce.edu.in
 Education Details
S.No Certificate/Degree Board/University From To Percentage
1 SSC SSC 1989 1990 80.1
2 INTERMEDIATE B.I.E 1990 1992 74.5
3 BTech NU 1992 1996 59
4 ME AU 1998 2000 68
5 Ph.D JNTU -K 2006 Pursuing
 Experience History
S.No Firm/Institution From To Total
Experience Designation
Last
received
Salary
1
HOOGHLY
MILLS
PROJECTS
LIMITED
JULY
1996
JAN
1998
1 YEAR
6 MONTHS
MAINTENANCE
ENGINEER 4,000/-
2
GOKUL
INSTITUTE OF
TECHNOLOGY
AND
SCIENCES
JULY
2003
JUNE
2007 4 YEARS ASSISTANT
PROFESSOR 16000/-
3
MVGR
COLLEGE OF
ENGINEERING
JULY
2007
AUG
2010
3 YEARS
1 MONTH
ASSISTANT
PROFESSOR 23,500/-
4
MVGR
COLLEGE OF
ENGINEERING
SEP
2010
SEP
2011
1 YEAR
1 MONTH Sr. ASSISTANT
PROFESSOR 35,880/-
5
MVGR
COLLEGE OF
ENGINEERING
OCT
2011
TILL
DATE
ASSOCIATE
PROFESSOR 62,950/-
 Service Details at MVGR College of Engineering
Employee ID : 0707160345
Date of Joining : 13-07-2007
Designation at the time of Joining : ASSISTANT PROFESSOR
Department Joined : MECHANICAL
Qualification at the time of Joining : M.E (INDUSTRIAL ENGINEERING)
Scale of Pay at the time of Joining : 8000-275-13500 (8275)
Current Designation : ASSOCIATE PROFESSOR
Current Department : MECHANICAL
Current Qualification : M.E (INDUSTRIAL ENGINEERING)
Current Scale of Pay : 33,132/-
Professional Body Memberships : MISTE, AMIE
 Publications
 1 “Biodiesel as an Alternate Fuel in a Diesel Engine with the cooled Exhaust
Gas Recirculation –A Measure to reduce harmful emissions”- International
Journal of Applied Research in Mechanical Engineering (Ijarme) Issn: 2231 –5950,
Vol-I, Issue-II
2 “Performance, combustion and emission of a PKME Fuelled DI-Diesel
engine Exhaust Gas Recirculation” Published in the International journal of
Engineering & Technology (IJET) ISSN: 2049-3444, volume-2, July 2012.
3“Comparative Study on the performance, combustion and emission of a
DI-Diesel engine tested with the methyl esters of jatropha and plam
kernel oils with Cold EGR Technique implementation” Published in the
International journal of Engineering Research and applications (IJERA)
ISSN: 2248-9622, volume-2, July- August 2012.
4“Advanced shaper” Published in the international monthly refereed journal
of research in management and technology, Volume-2, July 2013.
5“Design and Analysis of Airborne Radome” International journal of
Advanced Scientific and Technical Research (IJAST), Issue 4, volume-1, janfeb
2014
 Workshops / Training Programs
1. Attended <latest first>
S.No Workshop/Training
Details Host Institution Month and Year Sponsor
Details
1
Engineering &
Industrial Services
Overview: Product
Life Cycle
Management (PLM) /
Product Data
Management (PDM);
KBE / Engineering
Automation
M V G R C E,
VZM May’2014
2 Advanced optimisation
GVP College of
Engineering,VS
P
21ST NOV,2012
3
Product Life Cycle
Management
M V G R College
of Engineering,
Vizianagaram
7
th Jan’2012
4 WOMTECH-12 MVGR college of
engineering 25th
-26th May,2012
5
Artificial Intelligence
Techniques in
Engineering
Applications – 2011
M V G R College
of Engineering,
Vizianagaram
17th to 18th Dec’11
6 NWCATSD-11
M V G R College
of Engineering,
Vizianagaram
29th Sep’ 11
7
One day Work shop on
Teaching and
Research
Methodologies by
DR.P.N.RAO
M V G R College
of Engineering,
Vizianagaram
19TH JULY 2010
8
Integrated
computational
Methodologies in
Mechanical
Engineering Systems
M V G R College
of Engineering,
Vizianagaram
25th May to 6th June’09
9
Instructional Design
and Delivery
M V G R College
of Engineering,
Vizianagaram
19 - 21st May’ 08
2. Conducted <latest first; include seminars/conferences conducted, if any>
S.No Workshop/Training/Seminar/
Conference Details
Month and Year Role
1
Product Life Cycle
Management 7
th Jan’2012 Organiser
2 NWCATSD-11 29th Sep’ 11 Organiser
3
One day Work shop on
Teaching and Research
Methodologies by
DR.P.N.RAO
19TH JULY 2010 Organiser
4
Integrated computational
Methodologies in Mechanical
Engineering Systems
25th May to 6th June’09 Organiser
Area of research interest : Facility Location Problems,
 Non Conventional Sources of Energy,
 Fluid Mechanics
Committees represented :
S.No Deliverables to the College How do you think they contributed to college
1 Maintenance Committee
Convener As convener maintenance committee I am
contributing to the smooth running of the
amenities which are provided to the students
as well as faculty and looking in for the
efficient performance of the college general
amenity requirements like air conditioners,
water coolers and generators etc.,
2 Member convenor Press
relations
AS convener press relations I have
developed relevant media lists, and actively
built relationships with key media partners
and stakeholders, creating opportunities for
partnerships wherever possible. I have
developed and maintained good
relationships with external media providers
and journalists. Planned to promote all of
MVGR’s
Activities and Capitalize on topical, relevant
opportunities in the regional and local news
agenda.
3 SGLIT Member As a member of SGLIT I have contributed to
the conduction of a workshops for faculty
and students by renowned resource persons
like DR.P.N.RAO Professor University of
Northern IOWA, Dr. RAGHU ECHEMPATI,
Kettering University and MR. SRIDHAR
RAJU, Aeromech Technologies Bangalore
which amounted to the enrichment of
knowledge of students and faculty
4 Maintenance Committee
Member
As a member maintenance committee I have
been instrumental in relocating, renovating
and for the aesthetic look of various
laboratories. I have also looked in the aspect
of amenities provided both to students and
faculty. M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 4
A. Personal Details
Name in Full : Dr SRINIVASA RAO S
Date of Birth : 19 – 06 – 1977
Employee ID : 0607060302
P.F. Number : AP/32897/273
Email Id : ssrinivasdme@mvgrce.edu.in, ssrinivasdme@gmail.com
Mobile : 9948077849
Postal Address: PLOT No. 25, GOPALA NAGAR, VIZIANAGARAM
B. Education Details
S.No Qualification Board/University
1 Ph. D Andhra University, Visakhapatanam
2 M. E Andhra University, Visakhapatanam
3 B. E Andhra University, Visakhapatanam
4 Diploma S. B. T. E. T, Hyderabad
C. Experience
S.No Institution Designation From To Experience
in years
1 M V G R C E Assoc. Prof. Oct’2011 Till date
2 M V G R C E Sr. Asst. Prof. Sept’2010 Sept’2011 1 Year 1
Month
3 M V G R C E Asst. Prof. July’2006 July’2010 4 Years 1
Month
4 C R R C E, Eluru Asst. Prof. Nov’2003 June’2006 2 Years 7
Months
5
Nokada Chemicals
Ltd.,
IDA-Jeedimetla,
Hyderabad
Supervisor Oct’ 1995 July’ 1998 2 years
9 months
D. Professional Body Membership
ISTE (July’2008)
IE India (Sept’2008
CMSI (August’2008)
E. Areas of Interest/Research Expertise
Tyre Mechanics, Vehicle Dynamics and Composites
F. Administrative Role
S.No Name of the Committee Role
1 Purchase Committee member
To monitor the purchase
activities within the department
and communicate to the central
purchase convenor
2
Finance Manager for Center for
Industry Integrated Design &
To maintain the financial
activities
PHOTO
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 4
Development (CIID)
3
Department Academic Planning
– In charge
To monitor the academic
activities and bridge the gap
between department and
students
4
Project Review Committee In
charge
To arrange the project review
meetings regularly in order to
produce good student projects
5 Exam Cell In charge
Smooth conduction of Internal
exams, Lab external exams and
support given to the main
examination section during
external theory exams
6 Attendance Cell In charge
To monitor the student
presence in the class and
identify the attendance
defaulters
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Workshop/Training
Details Host Institution Month and
Year
Sponsor
Details
1
Engineering & Industrial
Services Overview: Product
Life Cycle Management
(PLM) / Product Data
Management (PDM); KBE /
Engineering Automation
M V G R C E, VZM May’2014
2
Nuclear Energy for
National Development M V G R C E, VZM Jan’2014
3
Vibration and Health
monitoring of Engineering
Infrastructures
Andhra University,
VSKP Jan’2014 TEQIP-II
4
MATLAB for ENGINEERING
APPLICATIONS M V G R C E, VZM Sept’2013
5
Vibrations and Rotor
Dynamics
Andhra University,
VSKP Dec’2012 TEQIP-II
6
Product Life Cycle
Management M V G R C E, VZM Jan’2012
7
Artificial Intelligence
Techniques in Engineering
Applications – 2011
M V G R C E, VZM Dec’2011
8
Challenges in Micro and
Nano Manufacturing:
Indian Perspective in the
Global Scenario
Andhra University,
VSKP Dec’2010 TEQIP-I
9
Integrated computational
Methodologies in M V G R C E, VZM 25th May to
6
th June’2009
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 4
Mechanical Engineering
Systems
10
Manufacturing and
Characterization Issues in
Nano tubes
GMRIT, Rajam Feb’2009
11 An Introduction to MAT
LAB and Its applications M V G R C E, VZM Sept’2008
12
Mathematical Techniques
and Their Applications to
Engineering and Physics
Problems
M V G R C E, VZM May’2008
13 Advanced Finite Element
Analysis G V P C E, VSKP Dec’2008
14
Computer Applications in
Solids, Fluids and Thermal
Sciences
M V G R C E, VZM March’2007
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1
Tensile and Flexural
Properties of Sisal/Jute
Hybrid Natural Fiber
Composites
International Journal Of
Modern Engineering
Research (IJMER), Vol.
4, No. 7, PP: 29 - 35
2014
2
Fabrication and Testing
of Natural Fiber
Reinforced Hybrid
Composites
Banana/Pineapple
International Journal of
Modern Engineering
Research (IJMER), Vol.
3, No. 4, PP: 2239 –
2243
2013
3
Tensile and Hardness
Properties Of
Banana/Pineapple
Natural Fibre Reinforced
Hybrid Composites
International Journal of
Engineering Research &
Technology (IJERT), Vol.
2, No. 7, PP: 1260 –
1264
2013
4
Design Of Shaft-Blade
Assembly For Effective
Utilization Of Mud Used
In Oil And Gas Drilling
International Journal Of
Mechanical And
Industrial Engineering
(IJMIE), Vol. 2, No. 2, PP:
6-9
2012
5
Analytical approach for
the prediction of steady
state tyre forces And
moments under
different normal
pressure distributions
Journal of
Terramechanics (I.F-
0.845), Vol. 49, PP:281-
289 2012
6
Preventive Maintenance
and Fault Diagnosis of
Pump Motor Bearings
IOSR Journal of
Mechanical and Civil
Engineering
(IOSRJMCE), Vol. 2, No.
6, PP:17-20
2012
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 4 of 4
7
Ride Analysis of Three
Wheeled Vehicle Using
MATLAB/Simulink
Int. J. on Manufacturing
and Material Science,
Vol. 02, No. 01, PP: 22-
26
2012
8
Lateral Dynamic
Behaviour Of Three
Wheeled Motor Vehicle
(Vikram Front Engine)
Institute of Engineers
(India), Vol. 92, PP: 25-
31 2011
9
Prediction of Small Size
Pneumatic Tyres for
Tyre Traction Properties
Int. J. on Production and
Industrial Engineering,
Vol. 01, No. 01, PP: 36 –
39
2010
10
Prediction of Tyre –
Road Interface under
Different Normal
Pressure Distributions
with Elliptical Contact
Patch
International Review of
Mechanical Engineering
(I.F-6.48), Vol. 4, No. 6,
PP: 664 – 672 2010
c. Research & Development / Consultancy works undertaken
S.No Title Funding Organization Duration
1
d. Certification Courses
S.No Title Offered by Duration
1
High Impact Teaching
Skills Wipro Mission 10X Oct’2011
2
Advanced Design in ProEngineering
PTC-ATC, Bangalore June’2010
3
Basic Design in ProEngineering
PTC-ATC, Bangalore Sept’2009
4
Instructional Design and
Delivery M V G R C E, VZM May’2008
5
Instructional Design and
Delivery C R R C E, Eluru June’2006
e. Others
“Corps of Electrical and Mechanical Engineers” award received from IE (India) in
Dec’2012 for the paper entitled “Lateral Dynamic Behaviour of Three Wheeled
Motor Vehicle (Vikram Front Engine)” published in Institute of Engineers in 2011.M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : BODDEPALLI ANANT RANGANATH
Date of Birth : 31-08-1972
Employee ID : 0707130346
AADHAR No. : 525235404838
PAN : AMKPA1151C
P.F. Number : AP/31897/313
Email Id : ranga_nath5@yahoo.co.in, ranganath1501@mvgrce.edu.in
Mobile : 9441836664
Postal Address : Flat:203, Morya Enclave, D.No: 39-9-147/4/5, Muralinagar, VSP-7
B. Education Details
S.No Qualification Board/University
1 B.Tech Andhra University, Visakhapatnam
2 M.Tech JNTU, Hyderabad
3 Ph.D (Continuing) Andhra University, Visakhapatnam
C. Experience
S.No Institution Designation From To Experience
in years
1 SISTAM College of
Engineering
Assistant
Professor Nov 1999 June
2005
5 Yrs 7
Months
2 Raghu Engineering
College
Associate
Professor
June
2005
July
2007
2 Yrs 1
Month
3 MVGR College of
Engineering
Associate
Professor July 2007 Till Date 7 Yrs 3
Months
D. Professional Body Membership
Institute of Engineers
Indian Society for Technical Education
E. Areas of Interest/Research Expertise
Heat Transfer, FRP Composites, Nano Technology
F. Administrative Role
S.No Name of the Committee Role
1 Time Table Committee Member
2 NBA, NAAC, AUTONOMOUS Department Incharge 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 A one day national workshop on PLM MVGRCE 7
th Jan 2012
2 Three Day work shop on optimization and
reliability approaches in engineering design
GITAM
University
22 – 24 Nov
2012
3 FDP on Engineering and Industrial Services
Overview PLM/PDM/Engineering
Automation
MVGRCE 30th May
2014
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1 Optimization of Surface
Damping Treatments for
Vibration Control of
Marine Structures
International Review of
Mechanical Engineering
May 2012
2 Failure analysis of pin
loaded glass
epoxy/polystyrene
composite panels
International Journal of
Advanced Research in
Engineering and
Technology
July – December
2012 CURRICULAM VITAE
1. Name : KANNAM NAIDU MANTRI
2. Date of Birth : 17-07-1978
3. Designation : Associate Professor
4. Organization : M.V.G.R College of Engineering, Vizianagaram
5. Department : Mechanical Engineering
6. Address For
 Correspondence : Flat no 402, Sri datta enclave,Naidu colony, Behind
 Church
 Thota Palem, Vizianagarm, Andhra Pradesh.
E-mail : mknaidu99@rediffmail.com,
mknaidu09@gmail.com
 Mobile Number 98664 74301
7. Area of Spécialisation : Machine Design, Nano composites
8. Acdemic Achievements : Recieved Railway Boards Prize in 22nd Indian
Engineering
Congress in 2007 for paper entitled “Dynamic behavior of
Railway Coach and Bogie frame using Finite Element
Analysis”
9. Academic Qualifications
Degree/Diploma Year Marks
%
Class University/Institute
S.S.C 1993 64.16 First Shantiniketan,Reddipalli
Intermediate 1995 71.4 First M.R.College,
Vizianagarm
B.Tech. (Mech.Engg.) 2000 68.5 First Nagarjuan University
M.Tech (Machine
Design.)
2003 66.14 First A.U., Visakhapatnam
Presently pursuing Ph.D as part time scholar from Department of Mechanical
Engineering, Andhra University College of Engineering, AU
10. Teaching Experience: 9 ½ years
 Worked as Assistant Professor in MVGR College of
Engineering,
Vizianagaram in between August‟2004-2009
 Worked as Sr. Assistant Professor in MVGR College of
Engineering, Vizianagaram in between 2009-2011
 Presently working as Associate Professor in MVGR College of
Engineering, Vizianagaram since 2011 to till date
11. Project works:
 M.Tech. : Random vibration analysis of three wheeler chassis under
random
 road characteristics using finite element method
 Ph.D : Nano Composites and RADAR Absorbing Materials
12. Paper publications
Journals:
1. “Dynamic behavior of Railway coach and Bogie frame using Finite Element
Analysis “Published in the Journal of Institution of Engineers (India) during
2006-07
Conferences:
1. K.Ramji, S.Srinivasa rao, amd M.K.Nadiu “Dynamic Behavior of threewheeler
light passenger vehicle using rigid body modeling” Proceedings of
12th
 National conference on Machines and Mechanisms at IIT Guwahati
Dec„2005, P.No 337-344.
2. “Vertical dynamic analysis of Indian rail bogie frame using finite element
analysis” presented in National conference on CAD/CAM at JNTU
Kakinada during 1-2 nd Feb‟2006.
3. “Dynamic Behavior of Three-wheeled Vehicle under Random Road
Characteristics Using FEM" presented in International conference on
society of experimental mechanics and exposition at Missouri, USA
during 4-17th Jun‟06.
4. “Finite element analysis of three wheeler motor vehicle chassis under random
road excitation” presented in International conference on society of
theoretical and applied mechanics (ISTAM) at AU, Vishkapatnam during
21-23rd Dec‟2006
5. “Random vibration analysis of three wheeled motor vehicle chassis using
finite element method” presented at 8
th International conference on
vibration problems at BESU, Sibpur, India during Jan 30th
–Feb 3rd „2007.
6. “Performance evaluation of three wheeler chassis under random road
excitation “Presented in International seminar in modeling, simulation and 
manufacturing systems (MSMS 2008) held at A.U.C.E, Andhra University
during 29-30 June‟2008.
7. “Ride Analysis of Three Wheeled Vehicle Using MATLAB/Simulink” Proc. of
Int. Conf. on Advances in Mechanical Engineering 2011 held at Noida
8. “Optimal response of three wheeled vehicle using semi active suspension
system” presented at International conference on Material processing and
characterization “(ICMPC) during 08-10 Mar‟2012 at Hyderabad
9. “Design of shaft and blade assembly for effective utilization of mud used in oil
and gas drilling” at international conference on mechanical and industrial
engineering (ICMIE -2012) held at Guntur on 9th Sep 2012.
13. Workshops/ Refresher Courses/ Conferences/ Training Programme
attended
1. A two day refresher course on Computer Numerical Control and APT
Programming organized by Department of mechanical engineering GMRIT,
Rajam on 8-9 Jan‟2005
2. A two day Workshop on “New Trends in Finite Element Analysis” held during
1-2 Dec‟2005 conducted by Department of marine Engineering, A.U.C.E,
A.U., VSP
3. Participated in 6-day Technical Teachers Training programme on
“Instructional Design & Delivery” conducted by NITTTR-Chennai at MVGR
College of Engineering in June‟2006
4. A conference on “Globalization: Engineering and Technological Challenges”
Conducted by I.E (India) on the eve of 22nd Indian Engineering congress at
Udaipur, Rajasthan in 2007
5. A short term course on “Advanced finite element Analysis” held at GVP
College of Engineering during 20-24th Dec‟07 at Vishakapatnam.
6. A Two Day National workshop on” Nano Technology-It‟s Applications”
Conducted by GMRIT, Rajam during 22-23rd Feb‟08.
7. Participated in 3-day Technical Teachers Training programme on
“Instructional Design & Delivery Systems” conducted by NITTTR-Chennai at
MVGR College of Engineering in May‟2008
8. Faculty Development program on “Integration of computer methodologies in
mechanical engineering systems (ICMMES‟09) conducted by Department of
Mechanical engineering, MVGRCE from 25th may – 6
th June 2009
9. A one day National workshop on “Product life cycle management(PLM-12)”
organized by Department of Mechanical engineering, MVGR college of
Engineering, chintalavalasa, Vizianagaram, AP.
14. Certification Courses
Certified to teach Basic design in Pro/ENGINEER Wildfire by Parametric
Technology Corporation (PTC)
15. Significant Contributions
1. Successfully organized Student Symposium SAMVID’07 in Department of
Mechanical Engineering, MVGRCE, Vizianagaram in 2007
2. Successfully conducted various events like technical, non technical, sports
and cultural events for students as Faculty Coordinator for Mechanical
Engineering Association since 2007 in Department of Mechanical
Engineering, MVGRCE, Vizianagaram
3. Took initiate to form SAE INDIA collegiate club in the college and at present
Faculty Advisor for SAE INDIA MVGRCE Collegiate club
4. Successfully guided Team Invincible (student team from mechanical
department of MVGRCE) in participating SAE BAJA 2014.
5. Successfully guided Team SVAYUKTHI (student team from mechanical
department of MVGRCE) in participating SAE SUPRA 2015.
6. Successfully guided Team SAMYADHA (student team from mechanical
department of MVGRCE) in participating ESVC 2015.
7.
16. Membership in professional bodies
1. Life Member of Indian Society for Technical Education (ISTE)
2. Life Member of Condition Monitoring Society of India (CMSI)
3. Member of Society of Automotive Engineering (SAE)
17. Subjects Taught:
Mechanics of Solids, Design of Machine Members – I, Design of Machine
Members – II, Robotics, Engineering Graphics, Machine Drawing, Gear
Engineering, Finite Element Method, Computer Aided Engineering Drawing
18. Labs Handled: 
Mechanical Work Shop, Mechanics of Solids Lab, Simulation LabM V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : Praveen Kalla
Designation : TPO
Date of Birth : 06/07/1980
Employee ID : 04MEF2053
Email : praveenkalla@mvgrce.edu.in
kalla.praveen@gmail.com
Mobile : +91-98483-51083, +91-8143-
00-8780
: +91-891-2568584 (R)
Permanent Address : # 43-5-59/9, Sai Krupa Residency, Rly New Colony
Visakhapatnam -16
B. Education Details
S.No Certificate/Degree Board/University From To
1 (Ph D) Andhra University 2008 --
2 MBA Andhra University 2004 2007
3 M E GITAM/Andhra
University 2002 2004
4 B Tech MVGRCE/JNTU 1998 2002
5 Intermediate BIE-AP 1995 1997
6 S S C BSE-AP 1994 1995
C. Experience History
S.No Institute/Industry Period Cadre/Designation
From To
1 MVGR COLLEGE OF
ENGINEERING
02 08 2004 30 04 2009 ASSISTANT PROFESSOR
2 MVGR COLLEGE OF
ENGINEERING
01 05 2009 31 09 2011 SENIOR ASSISTANT
PROFESSOR
3 MVGR COLLEGE OF
ENGINEERING
01 05 2011 TILL DATE ASSOCIATE PROFESSOR
D. Service Details at MVGR College of Engineering
Employee ID : 04MEF2053
Date of Joining : 02/08/2004
E. Professional Body Memberships : IE, ISTE, CSI
F. Publications
1. Journal Publications: 02
2. Conference Publications: 01
G. Presentations and Participations <include details of seminar presentations and
other conference/seminar attendance other than those published; 03
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
H. Workshops / Training Programs
1. Attended <latest first>
S.No Workshop/Training Details Host
Institution
Month and
Year
Sponsor
Details
1 Workshop on Product life
cycle management
MVGRCE Jan 2012 AICTE
2 Short term training program
on Condition monitoring of
mechanical systems
GITAM
UNIVERSITY
Mar 2009 AICTE-ISTE
3 Staff development program
on Finite element analysis
and its applications
GITAM
UNIVERSITY
Feb 2009 AICTE
4 Workshop on Trends in
Manufacturing – Industry
Perspective
MVGRCE July 2013 AICTE
5 BARC -
6 Workshop on PLM MVGRCE Jan 2012
7 Workshop on Applied FEA &
CAE
MVGRCE Jan 2011
8 FDP Integration of
Computer based
Methodologies in
Mechanical Engineering
Systems (ICCMES)
MVGRCE May & June
2009
AICTE
9 National Workshop on
Computer Applications in
Solids, Fluids & Thermal
Sciences
MVGRCE March 2007 AICTE
10 3 Week CAD/Cam Training
Program
MVGRCE May/June
2005
2. Conducted <latest first; include seminars/conferences conducted, if any>
S.No Workshop/Training Details Host
Institution
Month and
Year
1 Aadhrita 2012 MVGRCE Feb 2012
2 Hindu ePlus Challenge MVGRCE Jan 2012
3 AIMTDR AU Nov 2010
I. Contribution to the College
Committees represented :
S.No Deliverables to
the College
How do you think they contributed to college
1 T&P Helps in building career for students
2 CULTURAL Fills energy and confidence in students and improves
3 SPORTS their willpower to achieve higher goals.
4 MVGR ALUMNI We can get feedbacks and references about Higher
education, Jobs which will be very helpful to
students.
5 PHOTOGRAPHY Increase creative thinking, presence of mind and
imagination in students. INDUPURI SUDHAKAR
Sudhakar1679@gmail.com, Mobile: + 91 9246660328
Born in 28th June 1975, Vizianagaram, Andhrapradesh.
About Parents: I.Gopal Rao, I.Vimala (House wife)
Martial status: Married; Spouse’s Name: I.Lavanya, blessed with son
Status of passport: Available
Academic Excellence:
 National scholarship holder (SSC-10th in 1990 with 83.32%, Town High School ,
Bhawanipatna, Orissa)
 ISCE-Intermediate in 1992 with 71.3%,Govt. College, Bhawanipatna, Orissa)
 B.Sc (Physics) (1992-94) [Discontinued] & joined B.E program in 1994.
 B.E (Mechanical) with 68.82% from Orissa Engineering College (affiliated to Utkal
university) in 1998.
 Masters degree (Foundry Forge Technology) from National Institute Foundry Forge
Technology (under ministry of Human Resource& development) with 8.46 CGPA.
Ranchi University.
 Enrolled in Ph.D program (2010) as a Part-Time Scholar in Metallurgy Department of
Andhra University.[Status: Pre-talk is expected very soon]
Project Details:
 Microstructure, wear, ballistic and corrosion behavior surface modified of armour grade
AA7075 aluminium alloy using friction stir processing (Tentative title for Ph.D Thesis)
 Hotworkability aspects of silicon carbide particulate reinforced 2124 aluminium alloy
matrix, National Metallurgical laboratory (3rd Semester in M.Tech program).
Industrial Exposure:
 One month vocational training in Hindustan shipyard Limited(May-June1996)
 One month vocational training in Visakhapatnam Steel plant(May-June 1997)
Personal Details
 15 days industrial training in Heavy Engineering Cooperation, Ranchi(May2000)
 Short visits
 Hindustan Aeronautics Limited (HAL), Bangalore.
 FACOR, Garividi, AP
 Samkarg, Srikakulam
 Indian Space Research Organization (ISRO), Bangalore
 Nuclear Fuel Complex (NFC), Hyderabad.
 Defence Metallurgical ResearchLaboratory(DMRL),Hyderabad
 Manufacturing Department, Anamalai University.
 IIT Madras.
Professional Details:
Joined as JRF (February 2001- July 2001) in National Metallurgical laboratory,
Jamshedpur.
2–academic year worked as Junior lecturer in VR Siddhartha Engineering College
(2001-2003), Vijayawada.
Joined as Asst. Professor in MVGR College of Engineering July-2003,
Vizianagram and presently working as Associate professor in the Department of
Mechanical Engineering.
Responsibility held in Department level:
Member in NBA Team.
Representing as Library committee member since 2003.
Representing as Research & Development committee member for span of 8 months.
Act as Finance departmental In-charge for a span 2 years.
Key role in establishing Production Technology Laboratory and reviving additional
facilities in Metallurgy laboratory, Metrology laboratory.
Monographs to the credit
Laboratory manuals on Metallurgy laboratory, Machine shop, Production Technology
Laboratory, Metrology laboratory and An aid to Metallurgy laboratory.
Invited guest lectures:
Metallurgy & Industry Interaction in Rotary club, Vizianagaram.
Highlights on Technical paper presentation in Conferences
ICEMPC-2009 in IIT Madras.
AIMTDR-2012 in Jadavpur University Kolkata.
NWM-2014 organized by Indian Institute of Welding, Madras Branch.
Abstract selected for oral presentation “WEAR-2015” to be held in Toronto, Canada.
Acceptance of Technical paper Titled “Enhancement of wear and ballistic resistance of
armour grade AA7075 Aluminium alloy using Friction stir processing” for
publication in Defence Technology.
International Conference on Multidisciplinary Research & Practice (ICMRP-2014)
30th November 2014 at Ahmedabad Management Association, ATIRA Campus,
IIM-A Road, Ahmedabad, Gujarat, India
Manu scripts accepted:
ICMPC- March2015, Hyderabad ( in Association with Elsevier)
ICEEM-January2015,Tamilnadu( in Association with Elsevier)
ICMEDA 2015 : XIII International Conference on Mechanical Engineering Design
and Analysis, New Delhi, India, February 7 - 8, 2015
Technical paper has been selected in NWS-2015 (National Welding Seminar),
Jamshedpur
List of publications:
I. Sudhakar, V. Madhu, G. Madhusudhan Reddy, K. Srinivasa Rao. Enhancement of wear
and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing.
Defence Technology 11 (2015) 10-17. Available online at www.sciencedirect.com
(ELSEVIER)
Awards conferred for Excellency:
Selected as best technical paper in National Welding Meet-2014.
To the best of my knowledge the cited above are best to true in my knowledge.
Yours faithfully
 (I.Sudhakar)
Place: Vijayaram Nagar Campus, Vizianagaram
Date: 12-03-2015M V G R COLLEGE OF ENGINEERING DEPARTMENT OF
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 4
A. Personal Details
Name in Full : LOKIREDDI VENKATA VENU GOPALA RAO
Date of Birth : 01-07-1973
Employee ID : 09MEF2203
AADHAR No.: 7333 4356 1244
PAN : ADNPL2750L
P.F. Number : 409
Email Id : venugopal_l@rediffmail.com
Mobile : 09492986497
Postal Address : Associate Professor
Mechanical Engineering Department
Chintalavalasa,
Vizianagaram (Dist)
B. Education Details
S.No Qualification Board/University
1
B.E ( Mechanical
Engg.) Andhra University
2 M.E (Machine Design) Andhra University
3 Ph. D Indian Institute of Technology Madras
4
5
C. Experience
S.No Institution Designation From To Experience
in years
1
Bharat Heavy
Plates and Vessels.
Visakhapatnam,
India. (BHPV)
Graduate
Apprentice
Trainee
1997 1998 1Year
2
Naval Science and
Technology
Laboratory,
Visakhapatnam.
(NSTL)
Sr. Research
Engineer
Jan 2007 June
2007
6 months
3
IC&SR, IIT Madras,
Chennai
Project
Associate
Oct 2007 Nov
2007
2 months
4
VJ Core soft Pvt
Ltd., Pune.
CAE Software
Engineer
Nov
2007
June
2009
20 months
5
MVGR College of
Engineering,
Vizianagaram.
Associate
Professor
Jul 2009 Till date
D. Professional Body Membership
PHOTO
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 4
E. Areas of Interest/Research Expertise
1. Machine Design
2. Vibrations
3. Vehicle Dynamics
4. Random Vibrations
5. Finite Element Methods
F. Administrative Role
S.No Name of the
Committee
Role
1 Academic
Coordinator
1. Monitoring record of attendance,
preparing fortnight attendance
reports and follow up with
parents
2. Monitoring class work conduct,
syllabus coverage and status of
class work completion
3. Informing parents on attendance
and academic performance of
week students.
2 M.Tech Coordinator 1. Monitoring class work conduct,
syllabus coverage, seminars,
project reviews frequently.
2. Monitor the students activities like
mid exams, etc..
G. Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 National Workshop on
Clean air technologies
for sustainable
Development
(NWCATSD)
MVGRCE Sept 2011
2 National work shop on
Product Life cycle
Management
MVGRCE July 2012
3
b. Publications in National/International Journals/Books
S.No Title Journal Date of Publication
1 Optimization of
Parameters of Vibration
Absorber Using Artificial
Neural Network
Journal of the Institution
of Engineers (India),
2001, Vol. 82, pp.1
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 4
technology
2 Preview control of
random response of a
half car vehicle model
traversing rough road
Journal of Sound and
Vibration
2007, Volume 310,
Issues 1-2, 5 February
2008, Pages 352-365.
3 Responses of the
quarter-car vehicle
model with optimal skyhook
damper
International Journal of
Vehicle Autonomous
System
2008,Volume 6,
No.3/4, Pages 396-
418.
4 SKY-HOOK CONTROL
OF NONLINEAR
QUARTER CAR
MODEL TRAVERSING
ROUGH ROAD
MATCHING
PERFORMANCE OF
LQR CONTROL
Journal of Sound and
Vibration
2009, Volume 323,
Issues 3-5, 19 June
2009, Pages 515-529
5 STATIC STRENGTH
ANALYSIS OF
TUBULAR T-JOINTS
USING ANSYS
Journal of Basic and
Applied Scientific
Research
2011, Volume 1(9).
989-997.
6 Identification of Cracked
Beam Frequencies
Using Nural Network
International Journal of
Multidisplinary
Educational Research
2013, Volume 2,
Issue 5(2), Pages
285-303.
7 A New Design and
Analysis of BUS Body
Structure
IOSR Journal of
Mechanical and Civil
Engineering (IOSRJMCE)
2014, Volume 11,
Issue 5 Ver. I (SepOct.
2014), PP 39-47
8 Semi-Active Vehicle
suspension with
Skyhook Damper
Proc. 14th ISME
International
Conference on
Mechanical Engineering
in knowledge Age
2005, Delhi, Dec 12-
14
9 Finite Elment Analysis of
Static and Dynamic
Strength of T-Joints
Proceedings of the
International conference
on Design and
Advances in Mechanical
Engineering
P 58-64, SKP
Engineering
College,
Tiruvannamalai,
Tamilnadu,Indai,
16th
-17th
December,2011.
c. Certification Courses
S.No Title Offered by Duration
1 Pro E Certication for
Faculty
Pro E, Bangalore June 2010
2 High Impact Teaching
Skills
MVGRCE Oct’2011
3
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 4 of 4M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : Pusapati Ranga Raju
Designation : Assistant Principal (Admin.)
Date of Birth : 08.08.1961
Employee ID : 9711190039
Email Id : rangaraju@mvgrce.edu.in
Mobile : +91-9440435617
Address : Plot No 7, Engineers Colony
V T Agraharam,Vizianagaram.
B. Education Details
S.No Qualification Board/University
1 M.Tech J.N.T.U.H
2 B.E Andhra University
3 P.G Dip Bharatya Vidya Bhavan, Hyd
4 SSC B.O.S.E
C. Experience
S.No Firm/Institution From To Total
Experience
Designation
1 Alwyn Voltas
Ltd
1985 1995 10 Years Asst.Manager
2 MVGR College
Of Engineering
1997 2007 10 Years Asst.Professor
3 MVGR College
Of Engineering
2007 Till to
date
7 Years Assoc.
Professor
D. Professional Body Membership - NIL
E. Areas of Interest/Research Expertise:
 MEFA
 IEM
 MS
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
F. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1
FDP on “Product Life
Cycle Management” MVGRCE 20th June 2014
2
Two day National Work
shop on Nuclear Energy
for National
Development by BARC.
M V G R College of
Engineering 23rd & 24th Jan 2014
3
Two day work shop on
“New trends in
Manufacturing – an
industrial Perspective”.
MVGRCE 8th and 9th July 2013
4
One day workshop on
“Machinery condition
monitoring”
Andhra University 14th march 2013
5
One Day National
Workshop on “Product
Life Cycle Management”
M V G R College of
Engineering 7th Jan 2012
6
Artificial Intelligence
Techniques in
Engineering
Applications – 2011
M V G R College of
Engineering,
Vizianagaram
17th to 18th Dec’11
7
Integrated
computational
Methodologies in
Mechanical Engineering
Systems
M V G R College of
Engineering,
Vizianagaram
25th May to 6th June’09
8 Condition Based
Maintenance
Condition Monitoring
Society of India
19th to 22nd Nov., 2007
9
Computer Applications
in Solids, Fluids and
Thermal Science
MVGR College of Engg.
Vzm.
23rd & 24th March,
2007
Organised :
S.No Workshop/Training/Seminar/
Conference Details
Month and Year
1 Product Life Cycle
Management 7th Jan’2012
2
Integrated computational
Methodologies in Mechanical
Engineering Systems
25th May to 6th June’09
3
Computer Applications in
Solids, Fluids and Thermal
Sciences
23rd and 24th March
2007CV: D R Prasada Raju
1. Name: D R Prasada Raju
2. Affiliation:
 i. Professor of Mechanical Engineering and Dean: MVGR College of Engineering (A)
 ii. R&D Advisor:
a. IIT-Madras
b. Jawaharlal Nehru Technological University-Kakinada
 iii. Visiting/Honorary Professor:
 a. PSG Group of Institutions-Coimbatore
 b. GMR Institute of Technology (A)-Rajam (AP)
 c. Srinivasa Institute of Engineering and Technology-Amalapuram (AP)
 d. Andhra University-Visakhapatnam
 iv. Honorary Treasurer: AP Akademi of Sciences
3. Contact Details:
 Home address: B-17, Dayalnagar, Visalakshi Nagar Post, Visakhapatnam-530043
 Tel No: 0891-2736060, Mobile: 7093537671
 E-Mail: deanfdp@mvgrce.edu.in, prasadarajudr@yahoo.com, drpraju@nic.in

4. Academic Qualifications:
Degree University/Institution Year Specialization
Ph.D Andhra University,
Visakhapatnam
1999 Mechanical Engineering
PG Study(1-yr) University of Newcastle, New
Castle upon Tyne, UK (British
Council Fellow)
1992 Environmental
 Engineering
M.Tech Indian Institute of Technology
Delhi
1979 Design Engineering
B.Tech Jawaharlal Nehru Technological
University, Govt. College of
Engineering, Anantapur
1977 Mechanical Engineering

5. Experience:
i. Project Engr/Dy Director, National Small Industries Corp Ltd, New Delhi: Jul 1979-Jan 1984
--Implementation in renewable energy projects, viz, rice-husk furnace, rice-husk ash cement
plant, briquetting plant for fuel pallets from biomass, solar wood seasoning kiln, etc.
ii. Sr Planning Engineer, NTPC Ltd, New Delhi: Feb 1984-Jun 1989
--Project Management Services in establishment of 1260 MW Vindhyachal Super Thermal
Power Plant.
iii. Principal Scientific Officer/Director/Scientist-G and Head of Division, Department of Science and
Technology, Government of India, New Delhi: Jun 1989-Dec 2014
--Promotion and management of science and technology through policy framework,
formulation of various programmes, its implementation and application for societal needs, etc.
iv. Full Life Cycle Leader, Byrraju Foundation, Hyderabad: Dec 2003-Aug 2008 (on leave from Govt
of India)
--Conceptualisation and implementation of Safe Water for Everyone using Effective Technology
programme for addressing drinking water problems on sustainable basis in rural areas. 
 6. Honours /Recognitions:
 Individual Level:
 Certificate of Merit for Paper published in Journal of Production Engineering, by The Institution
of Engineers (India), 1996.
 Andhra Pradesh Scientist Award by Government of AP, 2007.
 Distinguished Alumnus Award by Andhra University, 2008.
 Best Scientist/Engineer Award by the 95th Indian Science Congress, Visakhapatnam, 2008.
 Shortlisted for Priŵe MiŶister͛s Aǁard for EdžĐelleŶĐe PuďliĐ AdŵiŶistratioŶ, ϮϬϬ9.
 Eminent Engineer Award by The Institution of Engineers (India), 2012.
 AIMTDR Silver Jubilee Award by Jadavpur University, Kolkata (Organisers of 4th International
and 25th All India Manufacturing Tech, Design and Research Conf), 2012.
 Pravasa Bharatiya Udyog Ratna Award by Delhi Telugu Academy, 2015
 Life Time Achievement Award in Engineering by Venus International Foundation, 2015.
 Project/Team/Group Level:
 Best Water NGO-Water Quality in India Award by Water Digest and United Nations Educational
and Scientific Organisation (UNESCO) for the years 2006, 2007 & 2008.
 Japanese Award for Most Innovative Development Project by Global Devp Network, 2007.
 Grand Challenges: Top Solutions Award by Technology Review--Publication of Massachusetts
Institute of Technology, USA, 2012.
 National Award for Excellence in Surface Water by Union Ministry of Water Resources
(recommended), 2013.
 FICCI-HSBC Water Award (Innovation Category-1st Rank) by FICCI, 2013.
 Shortlisted for Priŵe MiŶister͛s Aǁard for EdžĐelleŶĐe iŶ PuďliĐ AdŵiŶistratioŶ, ϮϬϭϯ.
7. Fellowship/Membership of Academies/Professional Bodies:
 Fellow, Indian National Academy of Engineering
 Fellow, Andhra Pradesh Akademi of Sciences and Telangana State Akademi of Sciences
 Fellow, The Institution of Engineers (India) (FIE)
8. Publications:
 National/International Journals: 8
 International/National Conferences: 25
 Technical Reports: 5
9. Sponsored Projects:
 Treatment of rural domestic sullage water through bio-remediation, sponsored by Rural
Technology Applications Group, IIT-Madras, Sep 2005-Aug 2006, Cost: Rs 2.26 Lakh.
 Study performance of low cost nano-silver coated filters for removal of bacteria in surface
water, sponsored by International Advanced Research Centre for Powder Metallurgy and
Newmaterials, Jan 2006-Jul 2007, Cost: Rs 4.38 Lakh
 Establishment of water treatment facility in peri-urban areas (slums) of Indore and Jabalpur
(MP), sponsored by UNHABITAT, Mar 2007-Aug 2008, Cost: US$ 30000 (Rs 18.74 Lakh).
10. Representation on Committees:
 Counterpart Official, Study on Shipboard Automation, United Nations Economic Commission for
Asia and Pacific (1986-07) 
 Member, Sub-Committee on Transportation, Island Development Authority, Planning
Commission, Govt of India (1986-08)
 Member, Technical Advisory Committee, Central Manufacturing Technology Institute,
Bengaluru (1995-2003 and 2009-2014)
 Member, National Advisory Committee, All India Manufacturing Technology, Design and
Research Conference (since 1995)
 Chairman/Member of Selection Committee for promotion of Scientists-National Informatics
Centre and Defence Research and Devp Orgn, Govt of India (2000-08)
 Member, National Committee on Water, CII, New Delhi (2006-08) and Water Management
Council, Godrej Green Business Centre-CII, Hyderabad (2007-09)
 Member, Scientific Advisory Committee, Union Ministry of Water Resources (2009-14)
 Member, All India Board for Post-Graduate Education and Research, All India Council for
Technical Education, New Delhi (2011-13)
 Member, Expert Committee on Surface Water and Climate Change, Central Water Commission,
Union Ministry of Water Resources (2011-14)
 Member, R&D Adv Committee, Union Ministry of Drinking Water and Sanitation (2011-14)
 Member, Sectional Committee of Bureau of Indian Standards, New Delhi (2011-14)
 Member, Technical Committee, Central Water and Power Research Station, Union Ministry of
Water Resources, Pune (2011-14)
 Chairman, Committee for Evaluation of Water Treatment Systems for removal of Fluorides and
Iron, Union Ministry of Drinking Water and Sanitation (2012-13)
 Member, Steering Committee, Software Technology Parks of India, Dept of Information Tech&
Electronics, Union Ministry of Communications & Information Tech (2012-14)
 Member, Jury for HSBC-FICCI Water Awards, Federation of Indian Chambers of Industry and
Commerce (since 2012)
 Member, Expert Committee, Central Soil and Materials Research Station, Union Ministry of
Water Resources, New Delhi (2013-14)
 Chairman, Gender Budget Committee, Union Ministry of Science&Tech (2013-14)
 Chief Assessor-Young Engineer& Scientist Awards, Honda Fdn(Japan) (since 2014)
 Chairman of Steering Group on Good Laboratory Practice, Organisation for Economic
Cooperation and Development (France) (2014)
 Member, Research Advisory Committee, Kovai Medical Centre and Hospital Research
Foundation, Coimbatore (since 2015)
11. Association with Educational Institutions:
 Member-Board for Industrial Research and Development, IIT-Delhi (1996-99)
 Member-Technology Development Mission, IIT-Kanpur (1999-2002)
 Member-Curriculum Devp Cmte, Indira Gandhi Natl Open Univ, New Delhi (2001-03)
 Member-Syndicate, Biju Patnaik University of Technology, Rourkela (2003-06)
 Member-Governing Council, GMR Inst of Tech(A), Rajam (since 2005)
 Member-Governing Council, Srinivasa Inst of Engg&Tech, Amalapuram (since 2008)
 Member-Governing Council, Shri Vishnu Inst of Tech, Bhimavaram (since 2011)
 Member-Selection Committee for Post-Graduate Programme, IIM-Indore (2011-14)
 Member-Governing Council, VR Siddartha Engg College(A),Vijayawada (since 2012)
 Member-Research Advisory Board, PSG Inst of Adv Studies, Coimbatore (since 2012)
 Member-Research Adv Bd, Gokaraju Rangaraju Ednl Society, Hyderabad (since 2015)
 Adjudicator-Doctoral Thesis: Andhra Univ, Bharatiar Univ and Osmania Univ.
12. Philanthropy: 
After retirement from DST, Dr Prasada Raju, spurning many attractive offers from various
organisations, opted to associate with a few academic institutions to enthuse young faculty to
take up R&D. He, hailing from a poor family in a small village, having benefitted from the charity
of fellow students and faculty, while pursuing B Tech, wishes to pay back to the society and
eŶjoLJs the ͚joLJ of giǀiŶg͛. He has ďeeŶ shariŶg 5% of his salarLJ eǀerLJ LJear for various social
causes and contributed cash component of various awards and the entire commuted portion of
pension towards instituting scholarships for poor students and Endowment Lectures in honour
of old teachers in a couple of engineering institutions where he and his son studied. He is a
regular donor of blood and donated it 32 times during the past 3 decades. M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 6
A. Personal Details
Name in Full :Ravi Kumar Naradasu
Date of Birth : 05-06-1976
Employee ID : 07MEF1123
AADHAR No.:209583806889
PAN :ACMPN3078K
P.F. Number :AP/31897/316
Email Id :naradasuravi@gmail.com
Mobile :9949618492
Postal Address :Flat No T4, SaiAmrutha Meadows
 Vuda Colony, Phase-IV
 Cantonment
 Vizianagaram-535003
 AP
B. Education Details
Level Name of institution/University
Year of
Passing
Degree/
Diploma/Certificate
%
Marks
Ph. D.
(Mech.)
J N T University, Hyderabad 2009 Doctorate
M. Tech.
(Thermal
Engineering)
J N T University, Hyderabad 2000 Post Graduation 75.1
B. Tech.
(Mech.)
Nagarjuna University, Guntur 1998 Degree 65.3
Intermediate Board of Intermediate 1993 Intermediate 72.5
S.S.C Board of Secondary Education, AP 1991 Secondary School 85.0 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 6
C. Experience
Sl. No
Name of
Company/Institute
Duration Designation
1
MaharajVijayaramGajapat
hi Raj College of
Engineering,
Vizianagaram
1
st November 2011-
till date
Professor in Department of
Mechanical Engineering
2
MaharajVijayaramGajapat
hi Raj College of
Engineering,
Vizianagaram
August 2007 to 31st
October 2011
Associate Professor in Department
of Mechanical Engineering
3
Gudlavalleru Engineering
College
August 2000 To July 2007
Assistant Professor in Department
of Mechanical Engineering
4 SGIT,Markapur
16th October 1998 to 13th
January 1999 &
February 2000 to
July 2000
Lecturer in Department of
Mechanical Engineering
D. Professional Body Membership
Life Member of Indian Society for Heat and Mass Transfer (LMISHMT)- 424
Life Member of the Institution of Engineers (India) (MIE)- M-144614-7
Life Member of Indian Society for Technical Education (LMISTE) –LM41734
Life Member of Combustion Institute (Indian Section) – LMC-731
Member of Society of Automotive Engineers India-7110410338
E. Areas of Interest/Research Expertise
Research interests include Waste heat recovery, optimization of thermal systems,
thermodynamic cycles, combined cycle power plants, alternate fuels, IC engines and
Exergy analysis. 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 3 of 6
F. Administrative Role
S.No Name of the Committee Role
1 R&D committee Co Ordinator
G. Achievements since Date of Joining
FDP/Workshops/Conferences Attended
1. PaƌtiĐipated iŶ Tǁo daLJ NatioŶal Woƌk shop oŶ ͞MatheŵatiĐal TeĐhŶiƋues aŶd
Their applications to Engineering and Physical Problems at MVGR College of
Engineering, during 23-24 May 2008.
2. Participated in AICTE-ISTE Short term Training Programme on Alternative Fuels
of IC Engines and Their impact on Environment, at JNTU Kakinada, during 17-21
June 2008.
3. Participated in ISTE-NSTEDB Training Programme on Faculty Awareness Camp on
Entrepreneurship (FACE) at JNTU Kakinada, during 22-24 June 2008.
4. Participated in Two week Faculty Development Program oŶ ͞IŶtegƌatioŶ of
Computer based Methodologies in Mechanical Engineering Systems (ICMMES-
Ϭ9Ϳ͟ spoŶsoƌed ďLJ AICTE, ĐoŶduĐted ďLJ MVGR College of EŶgiŶeeƌiŶg duƌiŶg Ϯϱth
May to 6th June 2009.
5. Participated in Symposium on Novel Ideas in CFD-(SONIC-09) on 18th December
2009 at International Institute of Information Technology,Pune
6. Participated in Mission10X one week training program conducted by Wipro
Technologies at MVGR College of Engineering, Vizianagaram during 7th June to
12th June 2010.
7. Participated in Mission10X Two day training program conducted by Wipro
Technologies at MVGR College of Engineering, Vizianagaram during 17th &18th
September 2010.
8. Participated in AICTE Sponsored QIP Short term course oŶ ͞IŶtroduction to
TuƌďuleŶt floǁs aŶd theiƌ pƌediĐtioŶ͟ duƌiŶg ϭ9th March-23rd March 2011 at
Indian Institute of Technology, Madras. 
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 4 of 6
9. Participated in International Conference on Recent Advances in Mechanical
Engineering (INCRAME-2011) at MGR University, Chennai, April 21-22, 2011.
10. PaƌtiĐipated iŶ CFD ǁoƌkshop ͞Computational Fluid Dynamics: Design and
AŶalLJsis͟ duƌiŶg ϭ9-22 July 2011 at Dr MarriChenna Reddy HRD Institute,
Hyderabad, conducted by Zeus Numerix, Mumbai.
11. Participated in one day workshop on Product life cycle management (PLM-12) at
MVGR College of Engineering, Vizianagaram on 07-01-2012.
12. PaƌtiĐipated iŶ “ERC suŵŵeƌ sĐhool oŶ ͞Autoŵotiǀe EŶgiŶe CoŵďustioŶ͟
organized by Indian Institute of Technology, Madras under National Center for
Combustion Research and Development during 24th to 28th September 2012 at
IIT Madras.
13. PaƌtiĐipated iŶ thƌee daLJ ǁoƌkshop oŶ ͞Laď ǀieǁ of NatioŶal IŶstƌuŵeŶts͟
sponsored by Indo-US Collaboration for engineering education from 1st to 3rd
November 2012 at MVGR College of Engineering, Vizianagaram.
14. PaƌtiĐipated iŶ tǁo daLJ NatioŶal ǁoƌkshop oŶ ͞ViďƌatioŶs aŶd Health ŵoŶitoƌiŶg
of Engineering Infrastructures (VHMEI-2014) held on 3rd&4th January
2014,conducted by Department of Mechanical Engineering, Andhra
University,Visakhapatnam-530003,Andhra Pradesh, India under sponsorship of
TEQIP-II.
15. Participated in two day national workshop on Nuclear energy for national
development held on 23rd&24th January 2014, conducted by BARC&MVGRCE at
MVGR College of Engineering, Vizianagaram.
16. Participated in Faculty development program on Engineering & Industrial
services overview, Product life cycle management(PLM)/Product data
Management(PDM),KBE/Engineering automation by Tata Consultancy services at
MVGR College of Engineering, Vizianagaram on 30 May 2014.
h. Publications in National/International Journals/Books
INTERNATIONAL:
1. Rajesh GuŶtuƌ, G. PƌasaŶthi, N. Raǀi Kuŵaƌ, ͞EffeĐt of CoŵpƌessioŶ Ratio oŶ
Performance and Emission Characteristics of VCR Diesel Engine Using Mahua
MethLJl Esteƌ͟ IJMEM“, 7(1), January-June 2014, pp:35-39
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 5 of 6
2. N.Ravi Kumar, Y.M.C.“ekhaƌ, “.AdiŶaƌaLJaŶa,ϮϬϭϯ, ͞EffeĐts of CoŵpƌessioŶ Ratio
aŶd EGR oŶ PeƌfoƌŵaŶĐe, CoŵďustioŶ aŶd EŵissioŶs of DI IŶjeĐtioŶ Diesel EŶgiŶe͟
International journal of Applied science and engineering,Vol.11,No.1,pp43-51.
3. N.Ravi Kumar., S.Jyothirmai,R.Ramesh,2013, ͞Towards artificial intelligence based
diesel engine performance control under varying operating conditions using
suppoƌt ǀeĐtoƌ ƌegƌessioŶ͟, THERMAL SCIENCE: Year 2013, Vol. 17, No. 1, pp. 167-
178.
4. B.MadhavVarma, N.Ravi Kumar, G.PƌasaŶthi, ϮϬϭϯ, ͞ EdžpeƌiŵeŶtal iŶǀestigatioŶ of
peƌfoƌŵaŶĐe aŶd eŵissioŶ ĐhaƌaĐteƌistiĐs of Diesel eŶgiŶe fueled ǁith liŶseed oil͟
International Journal of Current research review, Vol 05(12),pp 125-133.
5. P.Ravindra Kumar, RamachandaRaju, N.Ravi Kumar,2012,Effect of Parameters in
Once-Through Boiler for Controlling Reheat Steam Temperature in Supercritical
Power Plants, Research Journal of Engineering Sciences, Vol. 2(1), 27-34, January
(2013).
6. P.Ravindra Kumar, RamachandaRaju, N.Ravi Kumar,2012, Investigation of
Improvement in Boiler Efficiency through Incorporation of Additional Bank of
Tubes in the Economizer for Supercritical Steam Power Cycles, International
Journal of Engineering Research and Development, Volume 4, Issue 8, PP. 97-103
7. P.Ravindra Kumar, RamachandaRaju, N.Ravi Kumar,2012, Mathematical analysis &
parametric optimization on performance of steam generator for subcritical power
plants, International review of Mechanical Engineering (IREME) Vol.6,N7,pp1535-
1545.
8. N.Ravi Kumar, Rajesh.G, Shamali.S.V, Y.M.C.Sekhar,2012,A Paper titled
Experimental investigations of Performance and emission characteristics of A CI
engine Fueled with Soybean ďio diesel͟ IŶteƌŶatioŶal JouƌŶal of CuƌƌeŶt ƌeseaƌĐh
aŶd ƌeǀieǁ͟ Vol.ϰ;9Ϳ ,ppϯϲ-44.
9. N.Ravi Kumar, Rajesh.G, Y.M.C.Sekhar,2012,Performance and Emission
characteristics of slow speed Diesel engine fueled with soybean biodiesel,
International Journal of emerging technology and advanced engineering,
Vol.2(4),pp 489-495.
10. P.Ravindra Kumar, RamachandaRaju, N.Ravi Kumar,2012,Exergetic Analysis -
Optimization of Steam Generators Operating with Pulverized Coal, International
Journal of Mechanics and Thermodynamics, ISSN 2278-361X Volume 3, Number 2
(2012), pp. 85-97.
11. N.Ravi kumar,2011,Exergy Analysis of Porous Medium Combustion Engine Cycle,
ISRN Mechanical Engineering, Volume 2011, pp 1-6.
12. N.Ravi Kumar, K.Rama Krishna, A.V.Sita Rama Raju, 2007, “Thermodynamic Analysis
of Heat ReĐoǀeƌLJ steaŵ GeŶeƌatoƌ iŶ CoŵďiŶed CLJĐle Poǁeƌ PlaŶt͟ JouƌŶal of
Thermal Science, Vol.11, No.4, 2007, pp 143-156.
13. N.Ravi Kumar, K.Rama Krishna, A.V.Sita Rama Raju,2007, “Performance
improvement and Exergy analysis of gas turbine power plant with alternative
ƌegeŶeƌatoƌ aŶd iŶlet aiƌ ĐooliŶg͟ Energy Engineering,Vol.104, No.3, pp36-53.
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 6 of 6
14. N.Ravi Kumar, K.Raŵa KƌishŶa, A.V.“ita Raŵa Raju, ϮϬϬϳ, ͞PeƌfoƌŵaŶĐe siŵulatioŶ
of dual pƌessuƌe HR“G iŶ ĐoŵďiŶed ĐLJĐle poǁeƌ plaŶt͟, EŶeƌgLJ EŶgiŶeeƌiŶg, Vol.ϭϬϰ,
No.1, pp64-78.
i. Research & Development / Consultancy works undertaken
Research grant of Rs 17,00,000/- is sanctioned by AICTE, New Delhi under RPS
scheme for the year 2011-ϭϮ foƌ the pƌoposal of ͞IŶǀestigatioŶ of CoŵďustioŶ,
emissions and vibrations of variable compression diesel engine using blended bio
fuels͟. The duƌatioŶ of the pƌojeĐt ǁas tǁo LJeaƌs.FACULTY PROFILE
1.Name of Teaching Staff : Dr S Adinarayana
2.Designation : Head Of The Department
3.Date of Birth : 17.06.1973
4.Employee ID : 99MEF1013
5.Department : Mechanical
6.Email : mechhod@mvgrce.edu.in
narayana.sa@gmail.com
7.Mobile : 9440584131
8.Date of Joining : 05.06.1999
9.Permanent Address : 49-48-5: NGGO’s Colony, Akkayapalem, Visakhapatnam-530016
10. Academic Performance:
S.No Name of the Course Name of the
Class Specialization School / College
1 Ph.D Bio- Diesel Andhra
University,
Visakhapatnam
2 M E Engineering
Design
PSG College of
Technology,
Coimbatore
3 B E Mechanical Andhra University
11. Experience Details
S.No. Total Experience
In years
Teaching Industry Research
1 16 Yrs
15 Years
(MVGRCE)
1Year
(BHPV)
4Years
12. Papers published
1. A Study on 3d Finite Element Analysis of Anterior Cruciateligament Behavior on Full
Extension, International Journal for Scientific Research & Development| Vol. 2, Issue
09, 2014 | ISSN (online): 2321-0613 Pg. 299-302
2. Effects of Compression Ratio and EGR on Performance,Combustion and Emissions of
Di Injection Diesel Engine, International Journal of Applied Science and Engineering
2013. 11, 1: 41-49
3. " Design & Analysis of metal form shells for motorcycle helmet” has been accepted to
be published with International Journal of Mechanical Engineering (IJME)”.Vol 39,
special issue- 2.34
4. “Effect of Cooled EGR on the combustion, Performance and emissions of DI- Diesel
Engine fuelled with Diesel and Esters of Jatropha & Palm Kernel Oils”
5. “Comparative Study On The Performance, Combustion And Emission Of A DIDiesel
Engine Tested With Methyl Esters Of Jatropha And Palm Kernel Oils
With Cold EGR Technique Implementation”,IJERA,Vo1 2, issue 4, July-August
2012, pp. 1881-1888
6. “Two Plane Balancing of a Conical Rotor Driven by vertical Belt System Designed to
reduce Gyro Effect”, IJMERR, Volume 1, Issue 3, October 2012, pages 1-8
7. “Some Studies on the Performance, Combustion and Emission of a PKME Fuelled DIDiesel
Engine with Exhaust Gas Recirculation”, IJET, Volume 2, issue 7, July 2012,
pages 1235-1245
8. “Bio Diesel as an alternate fuel in a diesel engine with the cooled exhaust gas
recirculation-A measure to reduce harmful emissions”, IJARME, Volume 1,issue 2,
2011, pages 10-15.
9. “Performance and emission studies on DT diesel engine fuelled with pongamia
methyl ester injection and methanol carburetion”, JESTEC – Malaysia, Volume 5,
issue 1, 2010, pages 30-40.
13. Papers presented in Conference
International
1. “Analysis And Performance Of FRC Exo-Structure Of The Autonomous Under Water
Vehicle Using FEM”atthe proceedings of“International Conference on Mechanical &
Industrial Engineering (ICMIE)” at Goa on 16th June, 2012, pages 14-20
2. “Experimental study of various effects of exhaust gas recirculation (EGR) on
Performance, Combustion and emission characteristics of VCR Diesel engine” at the
proceedings of International Conference on Recent Advances in Mechanical Engineering
(INCRAME-2011) at MGR University, Chennai, April 21-22, 2011.
National
1. “Design optimization of car alloy Wheels” atthe proceedings of National Conference on
New Frontiers in Mechanical Engineering (NFME-2K14) at JNT University, Kakinada,
July18-19, 2014. 
14. Workshops / Training Programs
Attended
S.No Workshop/Training Details Host
Institution
Month and
Year Sponsor Details
1
Product life cycle
management
(PLM-12)
MVGR
College of
Engineering
07-01-2012.
2
Two week Faculty
Development Program on
“Integration of Computer
based Methodologies in
Mechanical Engineering
Systems (ICMMES-09)”
conducted by during
MVGR
College of
Engineering
25th May to 6th
June 2009. sponsored by
AICTE,
3
Workshop on “Computer
Applications in Solids, Fluids &
Thermal Sciences”
MVGR
College of
Engineering
13th & 14th
February
2007
Conducted
S.No
Workshop/Training/Seminar/
Conference Details
Month and Year Role
1
Product life cycle management
(PLM-12) 07-01-2012. Co-ordinator
2
Greentech
2011
19-1-2011 Member
3
Applications of CFD in fluid Flow
Analysis
18&19 Nov 2010 Member
4
Faculty development Programme on
“Integration of Computer based
Methodologies in Mechanical
Engineering Systems (ICMMES- 09)”
25th May 6th June
2009
Co-ordinator
15. Professional Memberships:
1. Institute of Engineers
2. Indian Society for Technical Education
3. Condition Monitoring Society of India M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : Dr. P. RAVINDRANADH
Designation : Dean (Strategic Planning)
Date of Birth : 29.05.1966
Employee ID : 9710270002
Email Id: dean.sp.mvgr@gmail.com
Mobile : 9441939633
Postal Address : P. Ravindranadh
D.No: 9-17-20, CBM Compound,Visakhapatnam-530 003
B. Education Details
S.No Qualification Board/University
1 Ph D ( Robotics) AU 2007
2 ME (Machine Design) AU 1994
3
Diploma in Computer &Programing
Application
National Computing Centre (UK)
1989
4 BE (Mechanical Engg.) AU 1988
5 Intermediate Board of Intermediate 1983
6 SSC SSC 1981
C. Experience
S.No Institution Designation From To Experienc
e in years
1 Hindustan Shipyard Ltd. Industrial Trainee Jan 90 Jan 91 1 Year
2 MVGR College of Engg. Asst. Prof. Oct 97 Mar 04 7 Years
3 MVGR College of Engg. Assoc.Prof. Apr 04 Dec 07 3 Years
4 MVGR College of Engg. Professor Dec 07 Till Date 8 Years
Total Experience 19 Years
D. Professional Body Membership
1. Institute of Engineers
2. Condition Monitoring Society of India
E. Areas of Interest/Research Expertise
Robotics , Design of Bio mass Stoves
F. Administrative Role
S.No Name of the Committee Role
1 Governing Body of the Institute Member
2 Sub-Committee of G B Member
3 Administrative Team of College Dean(Strategic Planning)
PHOTO
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 CAR’s FOF IIT, Delhi Aug12 to Aug 14,2003
2 Intellgent Manufacturing ASC,JNTU,Hyderabad 13th Jan to 5
th Feb,2005
3 National Workshop on
Simulation of
Manufacturing Systems
NIT,Warangal October,2004
4 National Workshop in
Design and Production
Aspects in Mech Engg.
MVGR College of Engg. Jan 8th to 10th 2004
5 Computer applicationsin
Solids, Fluids, Thermal
applications
MVGR College of Engg. Feb, 2007
6 Integration of Computer
based Methodologies in
Mech. Engg. Systems
MVGR College of Engg. 25th May-6
th June,2009
7 Effective Teaching &
outcome based education
IUCEE, Mysore 28th June to 3rd
July,2009
8 Teaching Engineering
Using MATLAB and
Simulink
JUITW, Simla 12th-14th July 2010
9 Academic Audit NITTTR, Bhopal 25-29 Aug 14
10 Virtual Labs Amrita University, Kollam 22 Dec 2014M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 1 of 2
A. Personal Details
Name in Full : Dr. P. RAVINDRANADH
Designation : Dean (Strategic Planning)
Date of Birth : 29.05.1966
Employee ID : 9710270002
Email Id: dean.sp.mvgr@gmail.com
Mobile : 9441939633
Postal Address : P. Ravindranadh
D.No: 9-17-20, CBM Compound,Visakhapatnam-530 003
B. Education Details
S.No Qualification Board/University
1 Ph D ( Robotics) AU 2007
2 ME (Machine Design) AU 1994
3
Diploma in Computer &Programing
Application
National Computing Centre (UK)
1989
4 BE (Mechanical Engg.) AU 1988
5 Intermediate Board of Intermediate 1983
6 SSC SSC 1981
C. Experience
S.No Institution Designation From To Experienc
e in years
1 Hindustan Shipyard Ltd. Industrial Trainee Jan 90 Jan 91 1 Year
2 MVGR College of Engg. Asst. Prof. Oct 97 Mar 04 7 Years
3 MVGR College of Engg. Assoc.Prof. Apr 04 Dec 07 3 Years
4 MVGR College of Engg. Professor Dec 07 Till Date 8 Years
Total Experience 19 Years
D. Professional Body Membership
1. Institute of Engineers
2. Condition Monitoring Society of India
E. Areas of Interest/Research Expertise
Robotics , Design of Bio mass Stoves
F. Administrative Role
S.No Name of the Committee Role
1 Governing Body of the Institute Member
2 Sub-Committee of G B Member
3 Administrative Team of College Dean(Strategic Planning)
PHOTO
M V G R COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
Employee Profile
MVGR College of Engineering, Ver. 1.0 Page 2 of 2
Achievements since Date of Joining
a. FDP/Workshops/Conferences Attended
S.No Title Venue Date
1 CAR’s FOF IIT, Delhi Aug12 to Aug 14,2003
2 Intellgent Manufacturing ASC,JNTU,Hyderabad 13th Jan to 5
th Feb,2005
3 National Workshop on
Simulation of
Manufacturing Systems
NIT,Warangal October,2004
4 National Workshop in
Design and Production
Aspects in Mech Engg.
MVGR College of Engg. Jan 8th to 10th 2004
5 Computer applicationsin
Solids, Fluids, Thermal
applications
MVGR College of Engg. Feb, 2007
6 Integration of Computer
based Methodologies in
Mech. Engg. Systems
MVGR College of Engg. 25th May-6
th June,2009
7 Effective Teaching &
outcome based education
IUCEE, Mysore 28th June to 3rd
July,2009
8 Teaching Engineering
Using MATLAB and
Simulink
JUITW, Simla 12th-14th July 2010
9 Academic Audit NITTTR, Bhopal 25-29 Aug 14
10 Virtual Labs Amrita University, Kollam 22 Dec 2014BIO-DATA
1. Name : Dr.K.V.LAKSHMIPATHI RAJU
2. Designation : Principal & Professor
3. Department : Mechanical Engineering
4. Date of Birth : 16-07-1963
5. Faculty ID : 9710220001
6. Official Address : M.V.G.R.College of Engineering
Chintalavalasa
Vizianagaram – 535005
7. Phone No. : Office 08922 241199, 241039
Residence 08922 222765
Mo bile 94400 18656
8. Mail ID : principal.mvgr@gmail.com
kvl_raju@yahoo.co.in
9. Blood Group : B +ve
10. Qualification
Examination /
Degree
University / Board Institution Year Class /
Division
Specialization
B.Tech Andhra University S.R.K.R. College of
Engineering
1984 I Mechanical
Engineering
ME Andhra University A.U. College of
engineering
1989 I Industrial
Engineering
Ph.D. Andhra University A.U. College of
Engineering
2003 Facility Location
11. Experience
a) Teaching
Institution Designation Duration
From To
GITAM Lecturer September 1984 August 1992
C.R.Reddy College of
Engineering
Reader August 1992 October 1997
MVGR College of
Engineering
Principal & Professor in
Mechanical Engineering
October 1997 Till to date
b) R & D : ---
c) Industrial : ---
12. Field of specialization : Mechanical Engineering 
13. Subjects of interest (teaching) : Engineering Graphics, Engineering
Mechanics, Strength of Materials, Design of
Machine Elements, Production of Control and
Management, Operations Research.
14. No.of Scholars :
a) Awarded with Ph.D : 01
b) Working for Ph.D : 01
15. No.of M.Tech projects guided : --
16. Awards received : Best Thesis award 2007
17. Titles of books authored : ---
18. Membership of Professional bodies : FIE,MASME,MISTE,MCMSI,MEMCI
19. Member Curriculum development
Bodies (such as BOS) : JNTU-K, 2005-07
20. Any other distinctions : Member Core Committee,
Strategic Planning, JNT University, Kakinada
Regional Coordinator, EAMCET -2008 & 2009
21. No.of Conferences / Workshops : 15
S.No. Conference Venue Duration
1 ABET Symposium Pittsburg, USA 2
nd
- 3
rd April 2014
2 1
st World Summit on Accreditation
(NBA) New Delhi 25th - 28th March,
2012
3 Workshop on Management
Education (CII) Coimbatore 6
th - 7th January
2012
4 41st ISTE Annual National Convention Chandigarh 16-18 December,
2011
5 College Champions Meet (Wipro) Bangalore 22nd
 - 23rd
November, 2011
6 Workshop on Academic Leadership
(Wipro) Hyderabad 5
th
– 8th September,
2011
7 WIPRO Mission 10X Wipro, Bangalore 6
th September 2010
8 Robotics and Intelligent Automation
in Manufacturing and Services
PSG College of Tech. and Institute of
Advanced Studies 5
th - 6th August 2009
9 Academic Leadership IUCEE 29th June to 3rd July
2009
10 Management of Engineering
Colleges for Quality Education
Engineering Staff College of India,
Hyderabad
18th
 - 20th February
2008
11 Infosys Academic Leadership Infosys, Hyderabad 2008
12 Accreditation – Higher Education Hyderabad 2008
13 NASSCOM HR Summit Chennai 17th
– 20th July 2006
14 Teamtech 2007 IISc,Bangalore 2
nd
– 6th October
2007
15
Quality Improvement in Product &
Process Design using Taguchi
Approach
JNT University, Hyderabad 24th
 - 27th
September 2003
22. Countries visited on academic activity: USA
23. Administrative Position held :
GITAM: a) Lab in-charge work shop
b) Lab In-charge Applied Thermodynamics, Fuels Lab
 c) In-charge Examinations
C.R.Reddy College of Engineering a) In-charge Strength of Materials Lab
 b) In-charge Industrial Engineering Lab
 c) Head of the Department, Mechanical Engineering
MVGR College of Engineering: a) Principal (1997 to till to date)
Other a) Member Academic Council, M.R.(A), College, Vizianagaram
 b) Member Governing Body, M.R.P.G.College, Vizianagaram
 c) Member Governing Body, M.R.Pharmacy College, Vzm
d) Member Managerial Committee, M.R.Womens College, Vzm
e) Member Managerial Committee, M.R.Law College,Vzm
f) Member Board of Studies, Dept. of Mechanical Engg., JNTUK (2009-11)
24. Publications
I. Journals - National - 02
 a) National : 08
 b) International : 01
S.No. Name of the Journal Issue No. Title of Paper
1 OPSEARCH Vol.41 No.2
June 2004
Facility Location Problems in the
Presence of Single Convex / NonConvex
Polygonal Barrier /
Forbidden Region
2 OPSEARCH Vol.35 No.4
DeĐemďer ‘ϵϴ
Facility Location Problems in the
Presence of Two-Circular
Forbidden Regions with Euclidean
Distance Norm
II. Conferences
a) National :08
S.No. Name of the Conference Place and Time Title of Paper
1 Mechanical and Industrial Engineering Roorke, Feb, 1997 Facility location problems in the
presence of forbidden region –
International Conference on
advances
2 UNISPAR-96 Visakhapatnam
Sept,1996
Facility locations – A Scientific
approach proceedings
3 Molecular Electronics and Chemical Nerjuli, Arunachal Brief review of Bio – Material 
Computer Technologies Pradesh, Dec, 1995 Properties
4 National Science Congress 1994 Flow and Heat transfer of a Visco
– Elastic Fluid test an Infinite flat
plate in a rotating system
5 Natural Science Congress Jaipur, 1993 The unsteady MHD free
Convection flow modal in the
Geometry of rotation
6 Fourth National Congress Sept, 1990 Stationary phase concept for the
evaluation of critical radiation
patterns
7 ISTAM Anna University,
Dec, 1990
Exact Mathematical model of a
radiating element, 35th
 congress
8 IETE (Information Technology Trends) Visakhapatnam,
Dec, 1990
Estimation of Mechanical
Accuracy requirement for
reflecting antennas BIO-DATA
1. Name : Dr.K.V.LAKSHMIPATHI RAJU
2. Designation : Principal & Professor
3. Department : Mechanical Engineering
4. Date of Birth : 16-07-1963
5. Faculty ID : 9710220001
6. Official Address : M.V.G.R.College of Engineering
Chintalavalasa
Vizianagaram – 535005
7. Phone No. : Office 08922 241199, 241039
Residence 08922 222765
Mo bile 94400 18656
8. Mail ID : principal.mvgr@gmail.com
kvl_raju@yahoo.co.in
9. Blood Group : B +ve
10. Qualification
Examination /
Degree
University / Board Institution Year Class /
Division
Specialization
B.Tech Andhra University S.R.K.R. College of
Engineering
1984 I Mechanical
Engineering
ME Andhra University A.U. College of
engineering
1989 I Industrial
Engineering
Ph.D. Andhra University A.U. College of
Engineering
2003 Facility Location
11. Experience
a) Teaching
Institution Designation Duration
From To
GITAM Lecturer September 1984 August 1992
C.R.Reddy College of
Engineering
Reader August 1992 October 1997
MVGR College of
Engineering
Principal & Professor in
Mechanical Engineering
October 1997 Till to date
b) R & D : ---
c) Industrial : ---
12. Field of specialization : Mechanical Engineering 
13. Subjects of interest (teaching) : Engineering Graphics, Engineering
Mechanics, Strength of Materials, Design of
Machine Elements, Production of Control and
Management, Operations Research.
14. No.of Scholars :
a) Awarded with Ph.D : 01
b) Working for Ph.D : 01
15. No.of M.Tech projects guided : --
16. Awards received : Best Thesis award 2007
17. Titles of books authored : ---
18. Membership of Professional bodies : FIE,MASME,MISTE,MCMSI,MEMCI
19. Member Curriculum development
Bodies (such as BOS) : JNTU-K, 2005-07
20. Any other distinctions : Member Core Committee,
Strategic Planning, JNT University, Kakinada
Regional Coordinator, EAMCET -2008 & 2009
21. No.of Conferences / Workshops : 15
S.No. Conference Venue Duration
1 ABET Symposium Pittsburg, USA 2
nd
- 3
rd April 2014
2 1
st World Summit on Accreditation
(NBA) New Delhi 25th - 28th March,
2012
3 Workshop on Management
Education (CII) Coimbatore 6
th - 7th January
2012
4 41st ISTE Annual National Convention Chandigarh 16-18 December,
2011
5 College Champions Meet (Wipro) Bangalore 22nd
 - 23rd
November, 2011
6 Workshop on Academic Leadership
(Wipro) Hyderabad 5
th
– 8th September,
2011
7 WIPRO Mission 10X Wipro, Bangalore 6
th September 2010
8 Robotics and Intelligent Automation
in Manufacturing and Services
PSG College of Tech. and Institute of
Advanced Studies 5
th - 6th August 2009
9 Academic Leadership IUCEE 29th June to 3rd July
2009
10 Management of Engineering
Colleges for Quality Education
Engineering Staff College of India,
Hyderabad
18th
 - 20th February
2008
11 Infosys Academic Leadership Infosys, Hyderabad 2008
12 Accreditation – Higher Education Hyderabad 2008
13 NASSCOM HR Summit Chennai 17th
– 20th July 2006
14 Teamtech 2007 IISc,Bangalore 2
nd
– 6th October
2007
15
Quality Improvement in Product &
Process Design using Taguchi
Approach
JNT University, Hyderabad 24th
 - 27th
September 2003
22. Countries visited on academic activity: USA
23. Administrative Position held :
GITAM: a) Lab in-charge work shop
b) Lab In-charge Applied Thermodynamics, Fuels Lab
 c) In-charge Examinations
C.R.Reddy College of Engineering a) In-charge Strength of Materials Lab
 b) In-charge Industrial Engineering Lab
 c) Head of the Department, Mechanical Engineering
MVGR College of Engineering: a) Principal (1997 to till to date)
Other a) Member Academic Council, M.R.(A), College, Vizianagaram
 b) Member Governing Body, M.R.P.G.College, Vizianagaram
 c) Member Governing Body, M.R.Pharmacy College, Vzm
d) Member Managerial Committee, M.R.Womens College, Vzm
e) Member Managerial Committee, M.R.Law College,Vzm
f) Member Board of Studies, Dept. of Mechanical Engg., JNTUK (2009-11)
24. Publications
I. Journals - National - 02
 a) National : 08
 b) International : 01
S.No. Name of the Journal Issue No. Title of Paper
1 OPSEARCH Vol.41 No.2
June 2004
Facility Location Problems in the
Presence of Single Convex / NonConvex
Polygonal Barrier /
Forbidden Region
2 OPSEARCH Vol.35 No.4
DeĐemďer ‘ϵϴ
Facility Location Problems in the
Presence of Two-Circular
Forbidden Regions with Euclidean
Distance Norm
II. Conferences
a) National :08
S.No. Name of the Conference Place and Time Title of Paper
1 Mechanical and Industrial Engineering Roorke, Feb, 1997 Facility location problems in the
presence of forbidden region –
International Conference on
advances
2 UNISPAR-96 Visakhapatnam
Sept,1996
Facility locations – A Scientific
approach proceedings
3 Molecular Electronics and Chemical Nerjuli, Arunachal Brief review of Bio – Material 
Computer Technologies Pradesh, Dec, 1995 Properties
4 National Science Congress 1994 Flow and Heat transfer of a Visco
– Elastic Fluid test an Infinite flat
plate in a rotating system
5 Natural Science Congress Jaipur, 1993 The unsteady MHD free
Convection flow modal in the
Geometry of rotation
6 Fourth National Congress Sept, 1990 Stationary phase concept for the
evaluation of critical radiation
patterns
7 ISTAM Anna University,
Dec, 1990
Exact Mathematical model of a
radiating element, 35th
 congress
8 IETE (Information Technology Trends) Visakhapatnam,
Dec, 1990
Estimation of Mechanical
Accuracy requirement for
reflecting antennas 
 davido.extraxim@gmail.com