PROFILE
Name : M.RAJKUMAR
Designation : ASSISTANT PROFESSOR
Email ID : mraja491@gmail.com,
: rajkumarm@bitsathy.ac.in
Areas of Specialization : INDUSTRIAL SAFETY
Total Experience : Academic : NA
Industry : NA
Educational Qualification :
Degree Branch / Specialization University/Board Year of Passing
SSLC Matriculation Matriculation 2007
HSC Computer Science State board 2009
B.E. Mechanical engineering Anna university 2013
M.E. Industrial Safety and
Hazards management Anna university, Chennai 2015
Funded Projects :
S. No. Funding Agency Topic Amount
Sanctioned in Rs.
Year of
Sanction
1
CTDT – Anna
university
Replacement of coal in
thermal power plants by
Agricultural wastes
Rs. 25,000 2014
Patents (Specify the details) :------
Publications : -------
Journals : ------
Conferences :
1. M.Rajkumar and Dr. K.V.Thiruvengadaravi, “An Exahustive Study on Occupational
Health Hazards and their Abatement in Construction Industry” International
Conference On Technological Convergence For Information, Health, Food And
Energy Security conducted by CLRI- CSIR Adyar on 1
st and 2nd
 May 2015.
Attach your photo
here
Books Published : NA
Seminar, Conference, Workshop Attended:
1. Attended a one day workshop on “Industrial safety and risk management”
supported by Safety Engineers Association (SEA), India at CHEMFLUENCE’14 held at
AC Tech, Anna University.
Seminar, Conference, Workshop Organized:
1. Organized national level conference “Safety, Environment and Industrial Applied
Science & Technology” in Anna University, Chennai.
Membership in Professional Bodies:
1. Active member and one of the office bearers in American Society of Safety
Engineers India Students Chapter
2. Member of Safety Engineers Association.
Contributions to the Institution, Department and Society:
1. One of the committee members in Industrial safety syllabus revision - CBCS
regulation 2015 in Anna university, Chennai.PROFILE
Name : Dr. S Boopathi
Designation : Assistant Professor (Sl.G)
Email ID : boopathis@bitsathy.ac.in
Areas of Specialization : Manufacturing & Computer Aided Design
Total Experience : Academic: 7 Years 4 Months
S.No Institution/Industry Design. Experience Total Years &
Months From To
Total (as on August 2013)
Teaching in Engineering Colleges
1 AMS - Namakkal Lecturer 05-06-2006 31-05-2008 2 Years
2 BIT – Sathy AP 06.06.2008 30-06-2011 3 Years 1 Month
3 BIT – Sathy AP(Sr.G) 01.07.2011 31-08-2013 2 Year 2 Months
4 BIT – Sathy AP (Sl.G) 01.09.2013 Till date 1 month
Total (as on August 2013) 7 years &
4 months
Educational Qualification :
Degree Branch / Specialization University
Year of
Passing
B.E. Mechanical Engineering Anna University - Chennai May 2005
M.E. Computer Aided Design Anna University - Chennai May 2007
PhD Wire-cut Electrical Discharge
machining Process
Anna University – Chennai Viva Voce
Completed
Funded Projects :
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
1. AICTE New
Research
Promotion Scheme
(RPS) ,Delhi
Investigation on wire tool
vibration of dry wire-cut
electrical discharge machining
AICTE-India,
Rs.10,0000/- 2012 -2014
Publications
International Journals :
 Boopathi, S., and K. Sivakumar. "Experimental investigation and parameter
optimization of near-dry wire-cut electrical discharge machining using multiobjective
evolutionary algorithm." The International Journal of Advanced
Manufacturing Technology- Springer (2013): 67, (9-12), 2639-2655. (Impact
Factor: 1.201 as on 2013)
 S.Boopathi and K. Sivakumar, Experimental Comparative study of near dry Wire
cut electrical discharge machining(WEDM), European Journal of Scientific
Research, ISSN 1450-216X Vol.75 No.4 (2012), pp. 472-481. (SNIP Factor:0.34)
 S.Boopathi and K. Sivakumar, Experimental Analysis of Eco-friendly Near-dry
Wire Electrical Discharge Machining Process, Archives des Sciences -Geneva.
2012 65(10):334-346. (Impact Factor: 0.201 as on 2013)
 S.Boopathi, K Sivakumar, R Kalidas, Parametric Study of Dry WEDM Using
Taguchi Method. International Journal of Engineering, Research and
Development. (2012) 2(4): 1-6.
International Conferences:
 Boopathi, S., Sivakumar,K. and Kalidas, R. “Parametric Optimization of Near-dry WEDM using
MOABC”, All India Machine Tool Design and Research (AIMTDR), Production Engineering
Department, Jadavpur University, Kolkata- 700 032, India, December 14-16, 2012. (Peer Reviewed
Int.Conf. India.)
 Boopathi, S., Sivakumar, K. and Kalidas, R. “Optimization of machining parameters of WEDM process
based on Taguchi Method”, Proceedings of IETSD 2012, Bannari Amman Institute of Technology,
Erode, India-638 401, , September 3-5, 2012.
 Boopathi, S., Sivakumar, K. and Pradeep, G.M. “Parameter optimization of eco-friendly wire EDM
using central composite design”, International Conference On Modelling, Optimisation and Computing
(ICMOC– 2012), Noorul Islam University, Kumaracoil, Nagercoil, Tamilnadu, India, April 10-11, 2012.
 Boopathi, S., Sivakumar, K. and Naveenkumar, “Modeling and analysis of process parameters on metal
removal rate and surface roughness in near-dry WEDM of EN-32 steel by RSM approach”, International
Conference On Modelling, Optimisation And Computing (ICMOC – 2012), Noorul Islam University,
Kumaracoil, Nagercoil, Tamilnadu, INDIA, April 10-11, 2012.
National Conferences
 S. Boopathi, Naveen kumar T, K. Sivakumar, D.Gopalakrishnan, Gowtham V
o Study on machining parameter optimization of WEDM, Proceeding of the Second National
Conference OPTEST 2012, 20-21 April 2012 - BIT-Sathy, Erode-638 401.
 S. Boopathi, G.M. Pradeep, K. Sivakumar,
o Effects of Process Parameters on Material Removal Rate in Wire Electrical Discharge
Machining Using Nickel Chromium Alloy Steel, Proceeding of the Second National
Conference OPTEST 2012, 20-21 April 2012 - BIT-Sathy, Erode-638 401.
 S. Boopathi, G.M. Pradeep, K. Sivakumar,
o Parameter Optimization Of Near Dry Wire Edm Using Central Composite Design,
Proceeding of the Second National Conference RAME 2012 -22nd March 2012, MPNMJEC,
Chennimalai, Erode-638 112.
 Boopathi S,Naveen kumar T , Nandagopal M , Sivakumar K,
o Machining Parameter Optimization On Metal Removal Rate And Surface Roughness
Using Eco-Friendly Wedm By Rsm Approach, Proceeding of the Second National Conference
RAME 2012- 22nd March 2012, MPNMJEC, Chennimalai, Erode-638 112.
 S.Boopathi & S.Sasikumar
o “Kinematic Analysis of Drag Link Mechanism USING ADAMS” - National Conference on
Emerging Trends in Civil and Mechanical Engineering (ETCM-2007) –Mahendra
Engineering College, Namakkal, 20th -April 2007.
 S.Boopathi & S.Sasikumar
o “Moment Analysis of Drag Link Mechanism” –National Conference on Recent
Advancements in Mechanical Engineering 2007 (RAME-2007) –, KS Rangasamy College of
Technology, Tiruchencode, 28th March 2007.
 S.Boopathi & Dr.K.Sivakumar
o “Optimization of Material Removal Rate in WEDM” - National Conference on
Optimization Techniques in Engineering Science and Technology (OPTEST-2010) –,
Bannari Amman Institute of Technology, Sathyamangalam, 25-26th March 2010.
 S.Boopathi &Jeevanantham.P
o “Condition Monitoring on Vibration Response of Misaligned Rotors” – Third National
Conference on Recent AdvanceMents in Mechanical Engineering 2011 (RAME-2011) –, KS
Rangasamy College of Technology, Tiruchencode, 25th March 2011.
 S.Boopathi &Jeevanantham.P
o “Vibration Prognostics on Misaligned Rotors” – National Conference on Emerging Trends
in Mechanical Engineering (ETM-2011) –SSM College of Engineering, Komarapalayam, 23th
-March 2011.
 S.Boopathi &Jeevanantham.P
o “Experimental Investigation on Vibration Response of Misaligned Rotors” – National
Conference on Optimization Techniques in Engineering Science and Technology
(OPTEST-2011) –, Bannari Amman Institute of Technology, Sathyamangalam, 15-16th April-
2011.
FDP Attended
 Faculty Emblements Program on “Aircraft Industrial Applications”, during 21 June 2010
to 29 June 2010(Two Weeks), at Infosys Technology Limited, Mysore DC.
 Two Weeks Faculty Development Programme on “Research Methods and Tools for
Mechanical Engineering Faculty”, from 31th May to 11th June 2010, at at
Bannari Amman Institute of Technology, Sathyamangalam.
 Two Weeks Self Development Programme on “Non Traditional techniques for
Structural Optimization”, from 7th December to 21th December 2010, at at Bannari
Amman Institute of Technology, Sathyamangalam.
 Faculty Development Program two Times at BIT on 2009 and 2011.
Workshops Attended
 One Day Workshop on “Advanced Training on MITIBISHI Wire EDM”, at PSG Institute
of Advanced Studies and MC Craftsman, Coimbatore on 29 October 2010.
 Two day National workshop on “Research Method and Tools for Engineering Faculty”,
between 18 December 2009 to 19 December 2009, at Bannari Amman Institute of
Technology, Sathyamangalam.
Seminar, Conference, Workshop Organized:
S.
No.
Title Duration Major Sponsor(s) Level (International
/ National)
1
Two days’ Workshop on
Application of Intelligent
Optimization Techniques using
MATLAB -7.0
2 Days BIT National
2 DSIR –Women Development
Programme for Rural Women
1 Year DSIR National
3. Two Weeks Staff development
Programme
2 weeks BIT National
Guest Lecture Delivered:
 Two Days Workshop on “Optimization Intelligent techniques using MATLAB-07”, at Bannari
Amman Institute of Technology-January- 2011.
 Two Days Workshop on “Optimization Intelligent Techniques using MATLAB-07”, at
Mohammed Sathak Engineering College, Kilakarai- February - 2011.
 One Week Programme BIT and COINDIA “Research Tools for Engineering Faculty” at
COINDIA-December-2010.
 One Day Lecture on Two Weeks Faculty Development Programme on “Research Methods and
Tools for Mechanical Engineering Faculty”, from 31th May to 11th June 2010, at Bannari Amman
Institute of Technology, Sathyamangalam.
 One Week Programme BIT and COINDIA “Research Tools for Engineering Faculty” at
COINDIA-December-2010.
 One Day Lecture on Two Weeks Faculty Development Programme on “Research Methods and
Tools for Mechanical Engineering Faculty”, from 31th May to 11th June 2010, at Bannari Amman
Institute of Technology, Sathyamangalam.
 One Day Lecture on Two Weeks Faculty Development Programme on “Genetic Algorithm”, from
11th Dec. 2012, at Savitha University Chennai.
 One Day Lecture on Two Weeks Faculty Development Programme on “Response Surface Methods
for Mechanical Engineering Faculty”, from 30th March 2013, at Savitha University Chennai.
 Two days Seminar on “Artificial Bee Colony Optimization” Bannari Amman Institute of
Technology, Sathyamangalam, May- 2013.
Membership in Professional Bodies: MISTE (LM 71296)
Contributions to the Institution, Department and Society: Mechanical Engineering Class Advisor
 Vibration Lab In-charge
Awards and Recognitions:
Name of Awards / Prizes Year
Awards / Prizes
Received
(Organization
Name)
B.E. University 10th Rank 2005 Gold Medal -Anna University-Chennai
M.E University 1st Rank 2007 Gold Medal -Anna University-ChennaiPROFILE
Name : P.Mathan Kumar
Designation : Assistant Professor
Email ID : mathankumarp@bitsathy.ac.in,
 mathan129@gmail.com
Areas of Specialization : Non traditional machining processes, Rapid
 prototyping, Powder metallurgy, Optimization
Total Experience : Academic: 04 Yrs 01 Month Industry: Nil
S. Institution/
Industry Design.
Experience Total Years &
No. From To Months
Industry
- Nil -
Total (as on June 2015) Nil
Teaching
1.
Bannari Amman
Institute of
Technology,
Sathyamangalam
Assistant
Professor 15.06.2011 Till date 4 Years
Total (as on June 2015) 4 Years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engineering Anna university, Chennai May 2008
M.E. Manufacturing Engineering Anna university, Coimbatore May 2011
PhD Mechanical Anna university, Chennai Pursuing
Funded Projects
:
Amount Year of
S. No.
Funding
Agency Topic Sanctioned in Sanction Rs.
Investigation on the performance
of Electrical Discharge Machine
Using Crb2-Cu Electrode
21.30 lakhs 1 AICTE-RPS 2013
Projects/ Workshop /Seminar Proposals Submitted:
Consultancy Work : Nil
S. No. Organization/ Nature of Work Amount in Rs. Year Agency
Patents (Specify the details) : Nil
Publications :
Journals :
Conferences :
1.P.Mathan kumar “Performance of Silver coated copper electrode in EDM” National Conference
on Advances in mechanical engineering (AIME 2011), Department of Mechanical Engineering, Erode
sengunthar engineering college, Thudupathi.
2. P.Mathan kumar “Performance of Silver coated copper electrode in EDM” National
Conference, Department of Mechanical Engineering, SSN Engineering college, Komraalayam on
May 2011.
3.P.Mathan kumar “Optimization of machining parameter in EDM using CU-TIB2 electrode on
Monel metal” National conference on “Emerging technologies in Mechanical Engineering to Meet
Industrial Need”, Department of mechanical Engineering, N.S.N. College of engineering and
Technology, Karur held on 18th April 2015.
Books Published : Nil
Workshop(s) Organized: 01
Seminar, Conference, Workshop Attended:
.
1. Participated in Two day workshop on “Regression Based Mathematical Modeling:
Synthesis and Implementation for Engineering Research” during 07 &
08, November 2014, organized by dept. of mechanical engineering, BIT, Sathy.
2. One day seminar on “Corrosion Evaluation of Engineering Materials”, held at BIT on
29.09.2014.
S.No. Project
/Workshop/Seminar Title
Funding
Agency Month Amount
(Rs.) Status
1.
Investigation on the
Performance of Electric
Discharge Machining Using
Crb2-Cu Electrode
DRDO Jan
2013
23.62
lakhs Submitted
3. One-day workshop on “How to write a research article for a Conference / Journal”, BIT,
10.07.2014.
4. Two – day In-house Workshop on “Personal Effectiveness Programme (PEP)” Civil
Conference Hall, Bannari Amman Institute of Technology organized in association with Swami
Sukhabodhananda - Corporate Guru - Founder and Chairman of Prasanna Trust, Bangalore,
8 & 9th September 2012.
FDP Attended:
1. AICTE sponsored Two Week Faculty Development Programme on “Modeling and
Optimization of Manufacturing System Using Intelligent Techniques” (06.05.13 to
18.05.13)
Seminar, Conference, Workshop Organized:
S.No. Title Duration
Level
(Intern./National)
Ph.D. Guidance / Supervisorship: Nil
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
Contributions to the Institution, Department and Society:
 Department placement coordinator
 Department internship coordinator
 Board of Studies Member
 One of the coordinators for the Finance committee – FUTURA 2012, Project design
contest FUTURA 2013 

Name of Scholar Course Area of Research Status
 One of the active member in organizing national level conference conducted by department
(OPTEST – 2012, 2013, 2014)
 Held Position as a Class advisor for both UG (2013-2017 batch)
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : M Kumar
Designation : Assistant Professor
Email ID : kuaymar@gmail.com
Areas of Specialization : Engineering Design
Total Experience : Academic: 1 Year Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Nil
Total (as on June 2012)
Teaching
1 BIT - Sathy AP 01.06.2011 Till now 1 Year
Total (as on June 2012) 1 Year
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma
B.E. Mechanical Engineering Anna University - Chennai May 2009
M.E. Engineering Design Anna University - Coimbatore May 2011
PhD - - -
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications (Descending Year wise, Example start from 2011, 2010, 2009 etc):
Journals : Nil
Conferences :
1. M Kumar & M Sivakumar “Parametric optimization of WEDM process using Genetic
Algorithm” in National Conference on Optimization Techniques in Engineering Sciences and
Technology (OPTEST 2011), Department of Mechanical Engineering, Bannari Amman
Institute of Technology, Sathyamangalam
2. M Kumar & V Prabhukumar “Parameter optimization of Lathe WEDM process using
Taguchi Method” in National Conference on Optimization Techniques in Engineering
Sciences and Technology (OPTEST 2010), Department of Mechanical Engineering, Bannari
Amman Institute of Technology, Sathyamangalam
Books Published : Nil
Seminar, Conference, Workshop Attended:
1.Two days ‘Workshop on Application of Intelligent Optimization Techniques using
MATLAB - 7.0’
2. Two days Workshop on “Writing Effective Conference Papers” conducted by IIT – Bombay.
Seminar, Conference, Workshop Organised : Nil
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies: Nil
Contributions to the Institution, Department and Society: BOS Member
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : SATHISHKUMAR. C
Designation : ASSISTANT PROFEESOR
Email ID : sathishmechace@gmail.com
Areas of Specialization : ENGINEERING DESIGN
Total Experience : Academic: Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Total (as on June 2012)
Teaching
1
Bannari Amman
Institute of
Technology,
Sathyamangalam
Assistant
Professor 01.06.2012 Till Date ---
Total (as on June 2012)
Educational Qualification :
Degree Branch / Specialization University Institute
Year
of
Passi
ng
M.E Engineering Design Anna University
Coimbatore
Bannari Amman
Institute of Technology 2012
B.E. Mechanical Engineering Anna University
Chennai
Adhiyamaan College
of Engineering 2010
Funded Projects : NIL
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : NIL
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : NIL
Publications (IEEE Format): NIL
Journals : NIL
National
International
Conferences :
National : 3
International : 1
Books Published :
Seminar, Conference, Workshop Attended:
Seminar, Conference, Workshop Organised : NIL
Special Lecture Delivered: NIL
S.
No. Date Name of Staff Topic Venue where delivered
Ph.D Guidance / Supervisorship:
Name of Scholar Course Area of Research Status
Guest Lectures Delivered :
Topic Institution Date(s)
Membership in Professional Bodies:Nil
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions : NIL
Visits Abroad : NILPROFILE
Name : VELMURUGAN .S
Staff ID :
Date of Birth : 24/07/1977
Father Name : V.SHANMUGAKANI
Mother Name : S.SEENIAMMAL
Communication Address : No. 5/595 A.K.S. Nagar,
 Kumarapalayam Post,
 Sathyamangalam.
Mobile No. : +91 98434 67651
Designation : ASSISTANT PROFESSOR
Email ID : vsvelmurugan@ymail.com ; vsvmurugan@gmail.com
Date of Joining this Institution: 01.06.2012
Areas of Specialization : CAD/CAM
Total Experience : 14 Years Academic : 04 Years 08 Months
Industry : Nil
Others : 09 Years 08 Months
S.No. Institution/Industry Design. Experience Total Years &
Months From To
Industry
--- NIL ---
Teaching
1
Bannari Amman
Institute of
Technology,
Sathyamangalam
Assistant
Professor 01.06.2012 Till Date ---
2
E.G.S. Pillay
Engineering College,
Nagapattinam
Assistant
Professor 11.08.2010 28.05.2012 01 year
10 Months
3
Mahath Amma
Institute of
Engineering and
Technology,
Pudhukkottai
Senior
Lecturer 23.04.2010 06.08.2010 03 Months
4
J.J. College of
Engineering and
Technology, Trichy
Lecturer 10.10.2007 22.04.2010 02 Years
07 Months
Others
1
Mepco Schlenk
Engineering College,
Sivakasi
Technician 27.07.1998 05.10.2007 09 Years
02 Months
S.No. Institution/Industry Design. Experience Total Years &
Months From To
2
Meikandar I.T.I.,
Mayiladuthurai
Instructor
(Fitter Trade) 01.12.1997 25.05.1998 06 Months
Total (as on May 2012)
14 Years
04 Months
Educational Qualification :
Degree Branch /
Specialization University Institute Year of
Passing
M.E. CAD/CAM Anna University –
Trichy
J.J. College of Engineering
and Technology, Trichy 2010
B.E. Mechanical
Engineering
Anna University –
Chennai
Thiagarajar College of
Engineering, Madurai 2006
Subject Handled
UG:
 Engineering Metrology and Measurements
 Total Quality Management
 Engineering Mechanics
 Engineering Graphics
 Basic Civil & Mechanical Engineering
 Strength of Materials
 Fluid Mechanics and Machinery
 Manufacturing Technology – I
 Manufacturing Technology – II
 Advanced Manufacturing Processes
 Computer Integrated Manufacturing
 Fluid Machinery and I.C. Engines Laboratory
 Strength of Materials Laboratory
 Computer Aided Simulation and Analysis Laboratory
 Computer Aided Machine Drawing Laboratory
 Computer Aided Drafting & Modelling Laboratory
 Engineering Practices Laboratory
PG:
 Modeling and Analysis of Manufacturing Systems
Conferences :
National 02
International 01
Seminar, Conference, Workshop Attended : 05
Membership in Professional Bodies:
Life Member of Indian Society for Technical Education (ISTE) from 05.12.2001.
(Membership No. LM 32311)
Contributions to the Institution, Department and Society:
Awards and Recognitions :
 Among the top 10% Scorers in XXV Inter-State Talent Tests in Mathematics Jan.1994,
conducted by the Association of Mathematics Teachers of India.
 Received first rank in Speedstar Competitive Examinations in Typewriting English.
Bannari Amman Institute of Technology, Sathyamangalam 638 401
Department of Mechanical Engineering
Name Designation Specializations / Field of
Interest Photo Email-id and
Qualification Contact No.
VELMURUGAN
.S
ASSISTANT
PROFESSOR
B.E., M.E.
CAD/CAM
 Computer Aided
Design
 Computer Aided
Manufacturing
 Engineering
Mechanics
 Strength of Materials
 Industrial Safety
vsvelmurugan@y
mail.com ;
vsvmurugan@gma
il.com
+91 98434 67651PROFILE
Name : P.Senthil kumar
Designation : Assistant Professor
Email ID : bitsenthil@gmail.com
Areas of Specialization : Engineering design
Total Experience : Academic: 1 Year & 6 Months Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Total (as on June 2012) Nil
Teaching
1
Sri Krishna college of
engineering and
technology
Assistant
professor 4-6-2010 31-12-2011 1 year & 6
month
2
Bannarai Amman
Institute of
Technology,Sathy.
Assistant
professor June-2012 Till Date
Total (as on June2012) 1 year & 6
month
Educational Qualification :
Degree Branch / Specialization University Institute Year of
Passing
ME Engineering design Anna university College of
Engineering,
guindy
2010
BE Mechatronics engineering Anna university Sri Krishna college
of engineering &
technology,
Coimbatore
2008
Funded Projects :
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work :
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) :
Publications (IEEE Format):
Journals :
National
International
Conferences :
National 1
International
Books Published :
Seminar, Conference, Workshop Attended : 1
Seminar, Conference, Workshop Organised : 1
Special Lecture Delivered :
S.
No. Date Name of Staff Topic Venue where delivered
Ph.D Guidance / Supervisorship:
Name of Scholar Course Area of Research Status
Guest Lectures Delivered :
Topic Institution Date(s)
Membership in Professional Bodies:Nil
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : D.DINESH
Designation : Assistant Professor
Email ID : dhinesh1583@gmail.com
Areas of Specialization : Computer Aided Design.
Total Experience : Academic: 2 Year Industry: 2 Years 6 Months
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1
Rialto Enterprises Pvt
Ltd
Quality
Engineer Dec 05 June 07 1 year &
6 months
2 Diamond Metal works Quality
Engineer July 07 June 08 1 year
Total (as on June 2012)
2 Years 6
Months
Teaching
1
Nanda Polytechnic
College Lecturer June 08 May 09 1 year
2
Bannari Amman
Institute of Technology
Assistant
Professor 15.06.2011 Till Now 1 year
Total (as on June 2011) 2 Year
Educational Qualification :
Degree Branch / Specialization University
Year of
Passing
B.E. Mechanical Anna university 2005
M.E. CAD Anna university 2011
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences :
1. D.Dinesh & M.Venkata Sudhakar, “Experimental testing and analysis of Biobased
Polymer Matrix Hybrid Composites” National Conference on Recent Innovation in
Mechanical Engineering (RIME’11), Department of Mechanical Engineering, Mahendra
Engineering College, Mallasamudram.
2. D.Dinesh & M.Venkata Sudhakar, “Experimental testing and analysis of Biobased
Polymer Matrix Hybrid Composites” National Conference on Advances and Challenges in
Mechanical Engineering (ACME’11), Department of Mechanical Engineering, Erode
Senguthar Engineering College, Thudupathi.
Books Published : Nil
Seminar, Conference, Workshop Attended : Nil
Seminar, Conference, Workshop Organized: Nil
Ph.D Guidance / Supervisorship:
Name of Scholar Course Area of Research Status
Guest Lectures Delivered :
Topic Institution Date(s)
Membership in Professional Bodies: Nil
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : S. Maragatha Meenatchi
Designation : Assistant Professor
Email ID : maragathameenatchi.s@gmail.com
Areas of Specialization : Energy Engineering
Total Experience : Academic: 1 year 11 months Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Nil
Total (as on June 2012)
Teaching
1
Park College of
Technology, Coimbatore Lecturer 1.7.2010 4.5.2011 10 months
2
Bannari Amman Institute
of Technology, Sathy
Assistant
Professor
16.5.2011 Till now 1 year 1
months
Total (as on June 2012)
1 year &
11 months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. B.Tech Energy &
Environmental Engineering
Agricultural Engineering
College & Research Institute,
TNAU
2008
M.E. ME Energy Engineering Kumaraguru College of
Technology, Coimbatore
2010
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
-
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
-
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences : Nil
Books Published : Nil
Seminar, Conference, Workshop Attended :
1. Presented a paper entitled “Comparative Study Between Flat Plate And Evacuated Tube
Solar Water Heater” in 4rd national conference on “ADVANCES IN MECHANICAL
SCIENCES” during 12-13 March 2010.
2. Completed professional short term certificate course in CFD using ANSYS-CFX from
22.6.2009 to 4.7.2009 in Anna University, Chennai.
3. Presented a paper entitled “Product Recovery From Coconut Shell Through Pyrolysis” in
3
rd national conference on “ADVANCES IN MECHANICAL SCIENCES” during 26-27 March
2009.
Seminar, Conference, Workshop Organised : Nil
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
-
Guest Lectures Delivered :
Topic Institution Date(s)
Membership in Professional Bodies: Nil
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions :
1. Best outdoing student award for academic year 2009-2010 in Kumaraguru College of
Technology, Coimbatore
2. Awarded Gold Medal for PG degree.
Visits Abroad : NilPROFILE
Name : R Rajiev
Designation : Assistant Professor
Email ID :cheryuvaraj@gmail.com
Areas of Specialization : Production Engineering
Total Experience : Academic: 3 Years Industry: 1 Year
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1
Bannari amman
sugars Private limited. GET 3-06-2006 30-6-2007 1 Year
Total (as on June 2012) 1 Year
Teaching
1 BIT Asst Prof 04-06-2009 Till date 3Years
Total (as on June 2012) 3 Years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engg Anna University, Chennai 2006
M.E. Production Anna University, Coimbatore 2009
PhD Mechanical Engg Anna University, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
ent
Photogr aph
Conferences :
1. R. Rajiev, “Wear analysis for the forging tools- A retrospective and literature review”
OPTEST 2010, Bannari Amman Institute of Technology, March 2010
2. R. Rajiev, “Multi crietria decision making for selection of suppliers in supply chains”
OPTEST 2009, Bannari Amman Institute of Technology, March 2009
3. R. Rajiev,”Multi crietria optimization techniques for selection suppliers in supply
chains” ICOREM 2009, Anna university tiruchirappalli. May 2009
4. R.Rajiev,“Design and analysis of gasifier suspension system” OPTEST – 2011, Bannari
Amman Institute of Technology, March 2009
5. R.Rajiev, “Investigations of finite element analysis on hot forging dies” OPTEST 2012,
Bannari Amman Institute of Technology, March 2010
Books Published : Nil
Seminar, Conference, Workshop Attended
1. Participated two days workshop on Research Methods and Tools for Engineering Faculty
at BIT during 18-19 December 2009.
2. Attended three days FDP on “Classroom teaching and evaluation” at BIT during 22-24
June 2009.
3. Attended two days FDP on “Teaching Methodology” at BIT during 17-18 Novemebr 2009.
4. Attended two days FDP on “Teaching Methodology” at BIT during 17-18 Decemebr 2009.
5. Participated FDP on “Research Methods and Tools for Mechanical Engineering Faculty”
at BIT during 31st May to 11th June 2010.
6. Participated FDP on “Non-traditional techniques for structural optimization” at BIT during
7-21 Decemeber 2010.
7. Attended Two days National workshop on Industrial Automation with PLC,SCADA and
DCS during 28-29 July, 2010.
8. Attended one day workshop on “Nano and Micro machining” at Sona College of Technology
on 21.05.2010.
9. Participated seven days workshop on Faculty Development Programme at BIT during
March –April 2012.
Seminar, Conference, Workshop Organised : Nil
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life member of ISTE – LM 71299
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : E Prakash
Designation : Assistant Professor
Email ID : prk_mek@yahoo.co.in
Areas of Specialization : CAD/CAM, Vibration and Condition Monitoring
Total Experience : Academic: 3 Years 6 Months Industry: 1 Year
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1 IDEA Pvt. Ltd., GET 4-7-2005 12-6-2006 1 Year
Total (as on June 2012) 1 Year
Teaching
1
Bannari Amman
Institute of Technology Asst Prof 13-6-2008 Till date 4 Years
Total (as on June 2012) 4 Years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engg Anna University, Chennai 2005
M.E. CAD/CAM Anna University, Chennai 2008
PhD Mechanical Engg Anna University, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work :
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
1 Payoda
Technologies Pvt
Ltd., Coimbatore
Designing of hand held device
for soil parameters acquisition –
E Agri
-- 2012
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences
:
1. E Prakash,V Hariharan “Study of bearing housing vibration signatures and detection of
possible failures” Kumaraguru College of Technology, March 2008
2. E Prakash, “Fault detection of bearings using vibration analyzer” International conference
on Advances in Design and Manufacturing, Karunya University, Feb 2008
3. E Prakash, “Effects of rubbing in a shaft, bearing housing vibration signatures and
detection of possible failures” OPTEST 2009, Bannari Amman Institute of Technology,
March 2009
4. E Prakash, S Pradeep, “Vibration Prognostics on Ball and Roller bearing using Labview”
– National Conference on Optimization Techniques in Engineering Science and Technology
(OPTEST-2011) –, Bannari Amman Institute of Technology, Sathyamangalam, 15-16th April-
2011
5. E Prakash, Aravindha Pandiyan, “Prediction of defects in bearing using vibration
signature analysis” – Third National Conference on Recent Advancements in Mechanical
Engineering 2011 (RAME-2011) –, KS Rangasamy College of Technology, Tiruchencode, 25th
March 2011
6. E Prakash “Investigation on mechanical behavior of wood flour filled natural fibre hybrid
polyester matrix composites” – Bannari Amman Institute of Technology during 20-21 April
2012
7.
Books Published : Nil
Seminar, Conference, Workshop Attended :
1. Attended FDP on Finite Element Analysis at BIT during 19-20 November 2008
2. Attended a National seminar on Automation for Green Manufacturing held at Kongu
Engineering College during 11-12 December 2008
3. Completed CATIA training program conducted by CADD Technology during 7to22
September 2009.
4. Attended two days workshop on Research Methods and Tools for Engineering Faculty at
BIT during 18-19 December 2009.
5. Attended FDP on Vibrations in Rotating Machines at VIT, Vellore during 26-28 March 2010
6. Participated FDP on Research Methods and Tools for Mechanical Engineering Faculty at
BIT during 31st May to 11th June 2010.
7. Attended FEP on Introduction to Aircraft systems and Industry at INFOSYS, Mysore
during 21-29 June 2010
8. Attended Two days National workshop on Industrial Automation with PLC,SCADA and
DCS during 28-29 July, 2010
9. Attended one day workshop on Product development strategies using Rapid prototyping,
rapid tooling and reverse engineering at PSG College of Technology on 25.08.2011
Seminar, Conference, Workshop organised : Nil
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life member of ISTE – LM 71301
Contributions to the Institution, Department and Society
 Faculty leader of NEN – Conducted and Delivered a 7 days workshop on Kick starting
Entrepreneurial culture to the students of E-Cell at BIT, sathy
Member of Board of Studies of other institutes
Reviewer for Journals / books with details
Chaired a session at “International Conference”
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : A Anandha Moorthy
Designation : Assistant Professor
Email ID : E-mail: appuanandh@gmail.com
Areas of Specialization : Engineering Design
Total Experience : Academic: 5 Years Industry: 1 Year
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1
Coimbatore Compressor
Engineering Supervisor 1999 2002 3 Years
Total (as on June 2012) 3 Years
Teaching
1
Sri Ragavendra
Polytechnic Lecturer 2005 2006 1 Year
2
Bannari Amman Institute
of Technology,
Sathyamangalam
Lecturer 13.06.08 31.12.10
04 Years
Asst. Prof 01.01.11 Till date
Total (as on June 2012) 4 years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E.
Mechanical Engineering Erode Sengunthar Engineering
College, Anna University 2005
M.E.
Engineering Design Kongu Engg. College, Anna
University 2008
Ph D Composite Anna University, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
--
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
--
Patents (Specify the details) : Nil
Publications
Journals : Nil
Conferences :
National Conference:
1. A Anandha Moorthy, N Natarajan “Wind flow analysis of luxury vehicle radiator by
using CFD” Sixth National conference on Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011) Presented at Department of mechanical Engineering, BIT,
Sathyamangalam on 15th and 16th April 2011.
2. A Anandha Moorthy, E Prakash, “Effect of Rubbing in a Shaft, Bearing Housing
Vibration Signatures and Detection of Possible Failures” - National Conference on
Optimization Techniques in Engineering Sciences and Technology (OPTEST - 2009) –
Bannari Amman Institute of Technology, Sathyamangalam.
3. A Anandha Moorthy, Dr P Navaneetha Krishnan, “Effect of Booster Heating Coil in Food
Stuff Display Cabinet-Experimental Investigation” - National Conference on Optimization
Techniques in Engineering Sciences and Technology (OPTEST - 2008) – Bannari Amman
Institute of Technology, Sathyamangalam, on 27th and 28th March 2008.
4. A Anandha Moorthy, Dr P Navaneetha Krishnan, “Natural Heat Distribution
Characteristics of Food Stuff Display Cabinet-Experimental Investigation” - National
Conference on Resend Advancement in Mechanical Engineering (Mech RAME-2008) –
Mahindhra Engineering College, Thiruchengodu.
Books Published : Nil
Seminar, Conference, Workshop Attended:
1. Attended two days workshop on Research Methods and Tools for Engineering Faculty at BIT
during 18-19 December 2009.
2. Participated FDP on Research Methods and Tools for Mechanical Engineering Faculty at BIT
during 31st May to 11th June 2010.
Seminar, Conference, Workshop Organised : Nil
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
--
Guest Lectures Delivered : Nil
Topic Institution Date(s)
--
Membership in Professional Bodies:
 Life Member in ISTE (LM 71300)
Contributions to the Institution, Department and Society
 Board of Studies Member
 Class advisor for both UG students
 Metrology lab in-charge
Awards and Recognitions :
Visits Abroad : NilPROFILE
Name : Kalil Rahiman. M
Designation : Assistant Professor (Sr. G)
Email ID : mkalilrahiman@gmail.com
Areas of Specialization : Design & Production of Thermal Power Equipment
Total Experience : Academic: 14 years & 4 Months Industry: 3 yrs 9 Months
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1 Gedee Weiler Pvt Ltd March 1994 May 1998 3 yrs 9 Months
Total (as on June 2012) 3 yrs 9
Months
Teaching
1
KSR Institute of
Technology Lecturer
August
1998 June 2002 3 yrs 9 Months
2
KSR College of
Engineering Lecturer June .2002 May .2007 6 yrs
3
Bannari Amman
Institute of Technology
Asst. Prof
Sr. Grade June.2008 Till date 4 yrs 7 Months
Total (as on June 2012) 14 years &
4 Months
Educational Qualification :
Degree Branch / Specialization College / University
Diploma Mechanical Engineering KSR Institute of Technology
B.E. Mechanical Engineering Govt. College of Engg. Salem
M. Tech Design & Production of Thermal
Power Equipment
National Institute of Technology,
Tiruchirappali
PhD ( Pursuing ) Alternative Fuels Anna University
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency
Nature of Work Amount in Rs. Year 
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences
1. Kalil Rahiman M, and Manikandan M “Thermo Structural Analysis of Mixing Sphere in
Super Critical Boilers using ANSYS” Sixth National conference on Optimization Techniques
in Engineering Sciences & Technology (OPTEST 2011) Presented at Department of
mechanical Engineering, BIT, Sathyamangalam on 15th and 16th April 2011.
2. Kalil Rahiman M, “ Flow Analysis in Centrifugal Impellers” International Conference on
Emerging Research and Advances in Mechanical Engineering at Velammal Engineering
College, Chennai on March 19 – 20, 2009.
3. Kalil Rahiman M and Ramesh Srenyvasan V, “ Diesel Engine Performance and Emissions
of Diesel blends with Honge Oil” International Conference on Recent Trends in Materials
and Mechanical Engineering at Dr. Mahalingam College of Engineering, Pollachi, on
December 18– 20, 2008.
4. Kalil Rahiman M, “Performance & Emission Evaluation of a Diesel Engine Fuelled with
Jatropha Curcus Oil” National conference on Emerging trends in Thermal Engineering,
Competitive Manufacturing and Management at St. Joseph college of Engineering, Chennai,
titled on January 30, 2007.
5. Kalil Rahiman M, “Analytical Study for Atomization of Biodiesels and their Blends”
National conference on Recent Trends in Automobile Technology and its Future Prospects at
School of Engineering and Technology, Bharthidasan University, Trichy, January 20 – 21,
2006.
Books Published : Nil
Seminar, Conference, Workshop Attended:
1. Two weeks AICTE sponsored Staff Development Program on “Micro Machining & Micro
Electro Mechanical Systems” at Adiyamaan College of Engineering, Hosur from June 13th
to June 27th 2011.
2. Two days Workshop on “Advances in Automotive Engineering” at Bannari Amman Institute
of Technology Sathyamangalam, on 25- 26 February, 2011.
3. Two weeks AICTE sponsored Staff Development Program on “Emerging Trends in
Alternative Fuels and Emission Control Techniques for IC Engines” at Institute of Road
and Transport Technology, Erode from November 24th to December 7th 2010.
4. Two weeks AICTE sponsored Faculty Development Program on “Research Methods and
Tools for Mechanical Engineering Faculty” at Bannari Amman Institute of Technology
Sathyamangalam during May 31st to June 11th 2010.
5. Two days Intensive Training Program on “Finite Element Analysis” at Bannari Amman
Institute of Technology Sathyamangalam during November 19 – 20, 2008.
6. Two days Workshop on “Auto–Telematics” at K.S.Rangasamy College of Technology,
Tiruchengode, during October 10 – 11, 2008.
7. One day Workshop on “Nano Materials Characterization and their Process Applications”
at National Institute of Technology, Trichy, during February 28, 2008.
8. Three days Faculty Development Program by “Helix Training Institute” at K.S.R. College of
Engineering, Tiruchengode during January 25 – 27, 2008.
9. Two weeks Staff Development Program on “Evaluation of HVAC systems & Performance
Improvement” at PSG College of Engineering, Coimbatore, during December 9 – 22, 2007.
10. Two days Workshop on “Finite Element Method and Applications in Engineering using
ANSYS” at National Institute of Technology, Trichy, during November 26 – 27, 2007.
11. One week Short Term Training Program on “Recent Trends in IC Engine Testing and
Analysis” at National Institute of Technology, Trichy, during February 9 – 14, 2007.
12. One week Winter School course on “Modeling, Computing and Simulation in
Engineering” at IIT, Madras, during, December 18 – 22, 2006.
13. Two days Workshop on “Automotive Electronics” at K.S. Rangasamy College of
Technology, Tiruchengode, during September 22 – 23, 2006.
14. Training in “Basic Life Support & First Aid Skills” & “Basic Fire Safety and Emergency
Preparedness” at National Institute of Technology, Trichy, on March 28, 2006.
Seminar, Conference, Workshop Organised:
1. National level Workshop on “Automotive and Engine Design” at Bannari Amman Institute of
Technology, Sathyamangalam on September 3 -4, 2010.
2. National level Aero modelling design contest “HELIOS 09” by SAE Club at Bannari Amman
Institute of Technology, Sathyamangalam on August 28, 2009.
3. One day Workshop on “Recent Trends in IC Engines” at Bannari Amman Institute of
Technology, Sathyamangalam, presented by Mr. T M L Sankar, Assistant Manager, Ashok
Leyland, Chennai on 17th March, 2009.
4. National level Technical paper presentation “OPTEST 09” at Bannari Amman Institute of
Technology, Sathyamangalam during March 27 - 29, 2009.
5. Intra Collegiate Technical paper presentation “TORQUE 09” by SAE Club at Bannari Amman
Institute of Technology, Sathyamangalam on February 19, 2009.
6. Two days Faculty Development Program on “Finite Element Analysis” at Bannari Amman
Institute of Technology, Sathyamangalam, during November 19 -20, 2008.
7. Project Exhibition Committee for “ Futura 2008 ” at Bannari Amman Institute of Technology
Sathyamangalam during August 28 - 30, 2008.
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life Member in ISTE
Contributions to the Institution, Department and Society: Nil
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : P Sangaravadivel
Designation : Assistant Professor(Sr.Gr)
Email ID : shankar1144@yahoo.co.in
Areas of Specialization : Engineering Design, Composite Materials
Total Experience : Academic: 5 years 1 Month Industry: 4 Years
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1
Bannari Amman
Sugars Ltd
Shift
Engineer 28 -5-2001 28 -5- 2005 4 years
Total (as on June 2012) 4 years
Teaching
1
Bannari Amman
Institute of Technology
Asst Prof -
Senior Grade 28 - 5 -2007 Till date 5 Years 1
Month
Total (as on June 2012)
5 Years 1
Month
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma Diploma in Mechanical
Engineering
State board of Technical
Education 1998
B.E. Mechanical Engineering Anna University 2001
M.E. Engineering Design Anna University 2007
PhD Composite Materials Anna University, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences : Nil
Books Published : Nil
Seminar, Conference, Workshop Attended:
 National Seminar on “Tribology and Materials – NSTM 2011” in IIT Madras.
 One day workshop on “Product development strategies using Rapid Prototyping, Rapid
tooling and Reverse engineering” on 25-08-2011 in PSG College of Technology,
Coimbatore.
 Two day National workshop of “Industrial Automation with PLC, SCADA and DCS” on 28,
29 July 2010 in Bannari Amman Institute of Technology.
 National Seminar on “ Neuromorphic Engineering “ on 3rd, 4th july, 2009 in Bannari Amman
Institute of Technology.
 National workshop on “Embedded system design with PIC Microcontrollers “ on 15th
December 2009 in Bannari Amman Institute of Technology.
 Two days workshop on “Research methods and tools for engineering faculty” on 18th and
19th
- December 2009 in Bannari Amman Institute of Technology.
 One day National workshop on “Composite Materials and Applications (CMA 2009)” held
on 6th January ’09 at Sri Krishna College of Engineering and Technology, Coimbatore.
 International Workshop on “Manufacturing Tehnology- Realms ahead- ManTRA” on 7,8 –
Sep 2009 in Bharat Heavy Electrical Ltd, Trichy.
 Two day workshop on “LabVIEW” held on 21,22- Jan – 2008.
 Special lecture on “Nano materials” is going to be held on 7th October ’08 at C S I college of
Technology, Ketti.
 One day workshop on “Nanotechnology” on 17th
– Nov 2007 in Bannari Amman Institute of
Technology
Seminar, Conference, Workshop Organized:
 National conference in “ Optimization techniques in science and technology” ( OPTEST
2010)
 National conference in “ Optimization techniques in science and technology” ( OPTEST
2011)
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life member of ISTE (LM60273)
 SAE
Contributions to the Institution, Department and Society:
 Faculty in charge for the Society of Automotive Engineering. (SAE)
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : A Amarkarthik
Designation : Asst Prof (Sr. Grade)
Email ID : a.amarkarthik@gmail.com
Areas of Specialization : Engineering Design
Total Experience :Academic: 6 Years and 4 Months Industry: 10 Months
S.
No Institution/Industry Design. Experience Total Years &
From To Months
1
Cheviot Company
Limited, Kolkata
Maintenance
Engineer July 2004 May 2005 10 Months
Total (as on June 2012) 10 Months
Teaching
1
Bannari Amman Institute
of Technology,
Sathyamangalam
Lecturer 30.08.2005 30.03.2009
6 Years
4 Months
Assistant
Professor(S
enior
Grade)
01.04.2009 Till Date
Total (as on June 2012)
6 Years
10 Months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engineering
Bannari Amman Institute of
Technology
Bharathiar University
April 2004
M.E. Engineering Design
Bannari Amman Institute of
Technology
AU, Chennai
Aug 2008
PhD Mechanical BIT, Sathy
AU, Coimbatore Pursuing
Funded Projects : 1
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
1 AICTE, New Delhi
Double Acting Power Takeoff
for Ocean Wave Energy
Conversion
8,30,000/- 2010
Consultancy Work : 1
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
1 Umesh Pencils,
Pollachi
Designing of twin nozzle for
color pencil extrusion
25000/- 2011
Patents (Specify the details) : 2
S.No. Faculty Member Title of the Invention Sponsoring
Agency Registration Details
National/
International
1 Mr A. Amarkarthik
An Apparatus and a
Method for
Converting
Mechanical Energy of
Sea Waves into
Electrical Energy
NRDC, New
Delhi
Application No:
322/CHE/2007 A
Filing date
: 2007-02-16
Publication date
: 2008-11-28
National
2 Mr A. Amarkarthik
Double Acting Power
Take off Device for
Ocean Wave
Energy Conversion
Self
Application No:
692/CHE/2008 A
Filing date
: 20/03/2008
Publication date
: 03/04/2009
International
Publications : Nil
Books Published : Nil
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011)
2 Days National
2
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2010)
2 Days National
3
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009)
2 Days National
4
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2008)
2 Days National
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life Member in ISTE
Contributions to the Institution, Department and Society:
 DMR for ISO
 Faculty coordinator Students Industrial Visits and Training
 Lab in-charge Fluid Mechanics Lab
 Faculty coordinator IPR cell
 Faculty coordinator R&D club
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : V C Uvaraja
Designation : Assistant Professor (Sr. Grade)
Email ID : c_uva@rediffmail.com
Areas of Specialization : Composite Materials
Total Experience : Academic: 10 Years Industry: 6 Months
S.
No Institution/Industry Design. Experience Total Years &
From To Months
1
Bannari Amman Sugars
Ltd, Sathyamangalam
Maintenance
Engineer May 2000 Dec 2000 06Months
Total (as on June 2012) 06 Months
Teaching
1
Bannari Amman Institute
of Technology,
Sathyamangalam
Lecturer0 20.06.2005 30.03.2009
07 Years
Assistant
Professor(S
enior
Grade)
01.04.2009 Till Date
2
TamilNadu College of
Engineering , Coimbatore Lecturer 02.01.2004 10.05.2005
01 Year 5
Months
3
Park College of
Engineering and
Technology, Coimbatore
Lecturer
02.01.2001 30.06.2002 01 Year 06
Months
Total (as on June 2012) 10 Years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma Mechanical Engineering Sakthi Institute of Technology
State Board April 1997
B.E. Mechanical Engineering
Bannari Amman Institute of
Technology
Bharathiar
April 2000
M.E. Engineering Design Maharaja Engineering College
AU, Chennai Aug’ 2004
PhD Mechanical BIT, Sathy
AU, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : NIL
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : NIL
Publications : International Journal of Advanced Research in Technology
 (IJART, Vol.2 Issue 2, 2012, 1- 12)
Conferences
(National Level) :
1. Mr V C Uvaraja “A Quality Approach to Design an Assembly Line Robot using” National
Conference on Global Technologies in Manufacturing and Thermal Sciences (GTMTS-
2004), Sethu Institute of Technology Virudhunagar 9th&10th July 2004
2. Mr V C Uvaraj “CFD Modelling and Analysis of Ball Valve” National Conference on Application
of Emerging Technologies Adhiyamaan College of Engineering Hosur.March 29 – 30, 2006
3. Mr V C Uvaraja “CFD Modelling and Analysis of Ball Valve”, National Conference on The
impact of information Technology on Manufacturing Kumaraguru College of Technoloy
Coimbatore. March 24-25, 2006.
4. Mr V C Uvaraja “Design of connecting Rod using ANSYS”, National Conference on OPTEST
2006, Bannari Amman Institute of technology Sathyamangalam. 21st April 2006.
5. Mr V C Uvaraja “CFD Modelling and Analysis of Ball Valve”, National Conference on The
Contemporary Approaches in Design and Manufacturing, Alagappa Chettiar College of
Engineering and Technology Karaikudi 21st
 April 2006.
6. Mr V C Uvaraja “Failure Analysis and Redesign of aBiggest Heavy Duty Centrifugal Fan
Impeller”, Third National ConferenceOptimization Techniques in Engineering Sciences &
Technology (OPTEST 2008) BIT, sathymangalam 28th and 29thMarch 2008
7. Mr V C Uvaraja & Mr.S.Ramakrishnan “Design Simulation and Flow Analysis of Cam Sensor
usingProCAST”, Third National Conference Optimization Techniques in EngineeringSciences
& Technology (OPTEST 2008) BIT, sathymangalam 28th and 29th March 2008.
8. Mr V C Uvaraja, “Failure Analysis and Redesign of a Biggest Heavy Duty Centrifugal Fan
Impeller” Fourth National Conference Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009) BIT, Sathyamangalam on 28th and 29th March 2008
9. Mr V C Uvaraja “Development of Aluminium Matrix Composite Brake Disc”, Fifth National
Conference on Optimization Techniques in Engineering Sciences & Technology (OPTEST
2011) BIT, Sathymangalam 8th March2011to11th March2011.
10. Mr V C Uvaraja and R. Dinesh “Comparative study of hybrid aluminium composite with
reinforcement like SiC, RED MUD and B4C. Fifth National Conference on Optimization
Techniques in Engineering Sciences & Technology (OPTEST 2011) BIT, Sathymangalam 8th
March2011to11th March2011.
11. Mr V C Uvaraja and S.Mohan Kumar “Wear behaviour of Aluminium Matrix Composite Fifth
National Conference on Optimization Techniques in Engineering Sciences & Technology
(OPTEST 2011) BIT, Sathyamangalam 8th March2011to11th March2011.
12. Mr V C Uvaraja, and M MohanaPriya “Comparision of AL Metal Matrix Composite
Reinforced on B4C With SiC And REDMUD” 22nd April, Bannari Amman Institute of
Technology, (2012) Sathyamangalam.
13. Mr V C Uvaraja, and C.SathishKumar “Production and Characterization of Aluminium Metal
Matrix Composite Using Stir Casting” 22nd April, Bannari Amman Institute of Technology,
(2012) Sathyamangalam.
14. Mr V C Uvaraja, and Y.Arivu “Optimization on Friction and Wear Process Parameters Using
Taguchi Technique” 22nd April, Bannari Amman Institute of Technology, (2012)
Sathyamangalam.
Conferences
(International Level) :
1. Mr V C Uvaraja,Y Arivu and K SivaKumar “Optimization on Friction and Wear Process
Parameters Using Taguchi Technique” in the International Conference on Advances in
Construction, Manufacturing and Automation Research(INCACMA 2012) at Kong Engineering
College, Perundurai, held during 30th & 31st March2012.
2. Mr V C Uvaraja,Y Arivu,M MohanaPriya and C SathishKumar “Friction and Wear Behaviour of
Al-7075 with SiC and B4C” in the International Conference on Advances in Construction,
Manufacturing and Automation Research(INCACMA 2012) at Kong Engineering College,
Perundurai, held during 30th & 31st March2012.
3. Mr V C Uvaraja and C SathishKumar “Tribological Behaviour of Particulate Reinforced 6061
Aluminium Metal Matrix Hybrid Composite” in the International Conference on Advances in
Construction, Manufacturing and Automation Research(INCACMA 2012) at Kong Engineering
College, Perundurai, held during 30th & 31st March2012.
Books Published : NIL
Seminar, Conference, Workshop Attended:
 Short- Term Training Programme on "Time Compression Technology" organized by
Department of Mechanical Engineering, Bannari Amman institute of technology,
Sathyamanagalam. During 28Feb to March6, 2004.
 One day workshop on “Challenges & opportunities in CAE & Product Design” Conducted by
Department of Mechanical Engineering, R.M.K.Engineering College. During 22nd August,
2005.
 Three day work shop on “Environmental conscious Design and Manufacturing” by Department
of Mechanical Engineering, Bannari Amman institute of technology, Sathyamanagalam.
During 12-14 August, 2005.
 One week workshop on “Engineering Materials and Metallurgy” conducted at Department of
Mechanical Engineering, Bannari Amman institute of technology, Sathyamangalam. By Anna
University, Chennai. During 14th to 20th Nov, 2005.
 One day work shop on “Application of ANSYS for global Product Design” Conducted by
Department of Mechanical Engineering, Government College of Technology,
Coimbatore.During 20th to 21st May, 2006.
 One week work shop on “Applied Thermodynamics” Conducted by Department of Mechanical
Engineering, Bannari Amman institute of technology, Sathyamangalam. During 22nd May to 3rd
June2006.
 Three day National work shop on “Environmental Modelling and Simulation” Conducted by
Department of Mechanical Engineering, Bannari Amman institute of technology,
Sathyamangalam. During 10-12 Aug 2006.
 One Day work shop on “Nano Technology and the Society” Conducted by IIT Madras,
Chennai at Bannari Amman Institute of Technology, Sathyamangalam. During 17 Nov 2007.
 One week AICTE -ISTE Short term training Programme on “Advances in Refrigeration and Air
Conditioning Systems” Conducted by Department of Mechanical Engineering, Bannari
Amman institute of technology, Sathyamangalam. During 21st March to 27th March 2007.
 Two days intensive training program on “Finite Element Analysis” Conducted by Department
of Mechanical Engineering, Bannari Amman institute of technology, Sathyamangalam. During
19.11.2008 & 20.11.2008.
 Two day Workshop on “Quantitative Techniques for Research” organised by the Department
of Mechanical Engineering during 15.12.2008 & 16.12.2008. held at held at Kongu
Engineering College, Perundurai.
 One day special lecture on “Credit based system” held at Bannari Amman Institute of
Technology, Sathyamangalam on 18.04.2009.
 One National Seminar on “Embedded System Design with PIC Microcontrollers” organised by
the Department of Electronics & Instrumentation Engineering on 15th Dec, 2009. held at
Bannari Amman institute of technology, Sathyamanagalam.
 Two day Workshop on “Research Methods and Tools for Engineering Faculty” organised by
the Department of Mechanical Engineering during 18.12.2009 & 19.12.2009. held at Bannari
Amman institute of technology, Sathyamanagalam.
 Two day National Seminar on “Consumables through Composites – Processing &
Preparation” organised by the department of Mechanical Engineering during 06.01.2012 &
07.01.2012. held at Kongu Engineering College, Perundurai.
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2012)
2 Days National
2
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011)
2 Days National
3
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2010)
2 Days National
4
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009)
2 Days National
5
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2008)
2 Days National
Ph.D Guidance / Supervisorship: NIL
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : NIL
Membership in Professional Bodies:
 Life Member in ISTE - LM 48684
Contributions to the Institution, Department and Society:
 Board of Studies Member
 Coordinator for MESA
 ISTE convention Project in-charge for the XII International Student Convention Chapter, 2009
 Department coordinators for Project at FUTURA from 2007 to 2011
 Class advisor for both UG and PG students
 Dynamics Lab in-charge
Awards and Recognitions : NIL
Visits Abroad : NIL
Uvaraja V CPROFILE
Name : M Nandagopal
Designation : Associate Professor
Email ID : gopalnanda07@gmail.com
Areas of Specialization : Industrial Engineering
Total Experience : Academic: 13 Months Industry: 24 Years
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
1
M/S Megala Machines
India Ltd, Coimbatore
Production
Manager 2007 2011 4 Year
2
M/S Shanthi Gears
Ltd, Coimbatore
Quality
Control
Engineer
2004 2006 2 Years
3
M/S Gopalakrishna
Industries Coimbatore
Production
Manager 1985 2003 18 Year
Total (as on June 2012) 24 Years
Teaching
1
Bannari Amman
Institute of Tech,
Sathyamangalam
AP-Senior
Grade May 2011 May2012 1 Years
Associate 1 Months
Professor June2012 Till date
Total (as on June 2012) 13 months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma Mechanical Government Polytechnic,
Coimbatore 1985
B.E. Mechanical
Coimbatore Institute of
Technology, Coimbatore
Bharathiar University
1991
M.E Industrial Engineering
PSG College Of Technology
Coimbatore
Bharathiar University
1997
PhD - - -
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences : 2
Books Published : Nil
Seminar, Conference, Workshop Attended:
 Attended a Staff Development Programme on Computational Intelligence for Modeling and
Optimization of Manufacturing System held at Bannari Amman Engineering College during
6-18 June 2011
Seminar, Conference, Workshop Organised: NIL
Ph.D Guidance / Supervisorship: NIL
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : NIL
Topic Institution Date(s)
Membership in Professional Bodies: Nil
Contributions to the Institution, Department and Society :
 ISO Deputy Management Representative
 Industrial Visit co -ordinator for Mechanical Department
Awards and Recognitions : NIL
Visits Abroad : NILPROFILE
Name : T Rameshkumar
Designation : Associate Professor
Email ID : t_rameshkumar2000@yahoo.com
Areas of Specialization : Materials, Tribology
Total Experience : Academic: 10 Years Industry: Nil
S.
No Institution/Industry Design. Experience Total Years &
From To Months
Industry
- Nil -
Total (as on June 2012) Nil
Teaching
1
Maharaja Engineering
College, Avinashi Lecturer 05.06.2002 24.09.2003 1 Year
4 Months
2
Adhiyamaan College of
Engineering, Hosur Lecturer 06.10.2003 08.08.2006 2 Years
10 Months
3
Bannari Amman Institute
of Technology,
Sathyamangalam
Lecturer 11.08.06 30.03.09
5 Years
10 Months Sr. Lecturer 01.04.09 30.04.12
Assoc Prof 01.05.12 Till date
Total (as on June 2012) 10 Years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma Mechanical Engineering Kongu Polytechnic
State Board April 1997
B.E. Mechanical Engineering Maharaja Engineering College
Bharathiar April 2000
M.E. Engineering Design Kongu Engineering College
Bharathiar Dec’ 2001
PhD Mechanical BIT, Sathy
AU, Chennai Pursuing
Funded Projects :
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
1 DRDO, New Delhi
Studies on the wear Behavior of
Squeeze cast Al/SiC
Composites sliding against
3.73 lakhs 1 Year
2009-2010
automobiles Precision Material
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications :
Journals :
1. T. Rameshkumar, Dr. I. Rajendran and A. D. Latha, “Investigation on the Mechanical and
Tribological Properties of Aluminium-Tin Based Plain Bearing Material” International
Journal of Tribology in Industry, Vol.32, No.2, November 2010, pp 3-10.
2. T. Rameshkumar, Dr. I. Rajendran and A. D. Latha, “Mechanical and Tribological
properties of Aluminium-based Plain Bearing Material under Lubricated condition”
National Journal of Convergence in Engineering, Technology and Science, Vol.1 December
2009, pp 9-16.
Conferences :
1. T. Rameshkumar and K. Kannakumar, “Investigation on Tribological Properties of
Aluminium-Tin Based Alloy” Sixth National conference on Optimization Techniques in
Engineering Sciences & Technology (OPTEST 2011) Presented at Department of mechanical
Engineering, BIT, sathyamangalam on 15th and 16th April 2011.
2. T. Rameshkumar and K. Chinnarasu, “Comparative Studies on Tribological Properties of
Heat Treatable Aluminium-Based Alloys” Sixth National conference on Optimization
Techniques in Engineering Sciences & Technology (OPTEST 2011) Presented at
Department of mechanical Engineering, BIT, sathyamangalam on 15th and 16th April 2011.
3. T. Rameshkumar and K. L. Senthil Kumar, “A Study on Tribological Properties of
Aluminium Composite Materials” Sixth National conference on Optimization Techniques in
Engineering Sciences & Technology (OPTEST 2011) Presented at Department of mechanical
Engineering, BIT, sathyamangalam on 15th and 16th April 2011.
4. T. Rameshkumar, K. L. Senthil Kumar and S. Boopathy, “Optimization of Machining
Parameters using Taguchi Technique” Sixth National conference on Optimization
Techniques in Engineering Sciences & Technology (OPTEST 2011) Presented at
Department of mechanical Engineering, BIT, sathyamangalam on 15th and 16th April 2011.
5. T. Rameshkumar, Dr. I. Rajendran and A. D. Latha, “Tribological Studies on AluminiumTin-Silicon
Based Plain Bearing Material” 7th International Conference on Industrial
Tribology (ICIT 2010), Presented at TSI, Ranchi on 2-4 December, 2010.
6. T. Rameshkumar, Dr. I. Rajendran and K. L. Senthil Kumar, “Failure Analysis of Carbon
Chromium Steel (15cr65) Bearing” International Conference on Recent Trends in Materials
and Mechanical Engineering (ICMME 2008), Presented at Department of mechanical 
Engineering, Dr Mahalingam College of Engineering and Technology, Pollachi on 18-20
December 2008.
7. K. L. Senthil Kumar, R. Sivasubramanian, T. Rameshkumar and K. Kalaiselvan,
“Optimization of parameters in machining of composite material using Taguchi
technique” International Conference on Recent Trends in Materials and Mechanical
Engineering (ICMME 2008), Presented at Department of mechanical Engineering, Dr
Mahalingam College of Engineering and Technology, Pollachi on 18-20 December 2008
8. T. Rameshkumar, Dr. I. Rajendran, K. L. Senthil Kumar, V. C. Sathish Gandhi and S.
Dinakaran, “Failure Analysis of Angular Contact Ball Bearing in Bar Peeling Machine”
National conference on Application of FEM (FEM – 08) Presented at Department of
mechanical Engineering, Oxford Engineering College, Bangalore on 24 – 25 March 2008.
9. Vasa Ramu and T. Rameshkumar, “Design and Analysis of Heat Exchanger and FMEA of
Tube Straightening Machine” Third National conference on Optimization Techniques in
Engineering Sciences & Technology (OPTEST 2008) Presented at Department of mechanical
Engineering, BIT, sathaymangalam on 27th and 28th March 2008.
10.T. Rameshkumar, Dr. I. Rajendran, P. Karthik, P. J. Sridhar and K. Nandakumar, “A study
on Tribological Behavior of Aluminium-Based Bearing Material in Oil Lubricated
Conditions” Third National conference on Optimization Techniques in Engineering Sciences
& Technology (OPTEST 2008) Presented at Department of mechanical Engineering, BIT,
sathyamangalam on 27th and 28th March 2008.
11.P. S. Jagadesan, Dr. I. Rajendran and T. Rameshkumar , “Pipe Bend Analysis due to
pressure loading for shape irregularities” – Second National Conference on Optimization
Techniques in Engineering Sciences and Technology (OPTEST - 2007) – Bannari Amman
Institute of Technology, Sathyamangalam, 28 -29 March 2007.
12.T. V. Arjunan, Dr. P. Venkatachalam and T. Rameshkumar, “Performance Analysis of
Conventional Solar Still” - National Conference on Emerging Trends in Mechanical
Engineering and Sciences (ETIMES - 2007) – Bannari Amman Institute of Technology,
Sathyamangalam, 19 -20 December 2007.
13.V. C. Sathish Gandhi and T. Rameshkumar, “Rapid Prototyping Technologies and
Benefits” - National Conference on Applications of Advanced Quality Methods in Engineering
& Technology (AAQMENT - 2006) – Erode Sengunthar Engineering College, Dhudupathi, 23
-24 February 2006.
Books Published : Nil
Seminar, Conference, Workshop Attended:
 One day special lecture on “Credit based system” held on Bannari Amman Institute of
Technology, Sathyamangalam on 18.04.2009.
 One day special Lecture on “Industrial Wear Control” at Indian Institute of Technology –
Madras, Chennai on 22 January 2009
 Two days National Seminar on “Soft Computing in Industrial Automation” during 5-6
November, 2008, at Kongu Engineering College, Perundurai, Erode.
 One day Seminar on “Challenges and Opportunities in Surface Engineering
(Challenge 2007)” during 21st November, 2007, at NIT, Thrichirapalli.
 One day National workshop on “Nanotechnology and the Society” during 17th
November, 2007, at BIT, Sathyamangalam.
 Two day National workshop on “Heuristic Optimization Techniques for solving Multidisciplinary
Engineering problems” during 8 – 9 September, 2007, at PSGCT,
Coimbatore.
 Two day National workshop on “Emerging Trends in Corrosion Control & Surface
Engineering (CC & SE 2007)” during 9th – 10th February, 2007, at NIT, Thrichirapalli.
 Two day National workshop on “Tribology” during 7th to 8th February, 2007, at
Government College of Engineering, Salem.
 One day workshop on “Effective Communication” held on Bannari Amman Institute of
Technology, Sathyamangalam on 18.10.2006.
 Training for Internal auditors of ISO:9001-2000 quality systems records and documents
 Two day National workshop on “Exploring the advances in Digital Product Design,
Simulation and Manufacturing – DPDSM 2006” during 15 – 16 March, 2006, at Bannari
Amman Institute of Technology, Sathyamangalam.
 FDP on “Dynamics of Machines” during 22nd to 27th November 2004, at Kongu
Engineering College, Perundurai, Erode
 FDP on “Finite Element Techniques” during 24th to 29th November 2003, at Kongu
Engineering College, Perundurai, Erode
 FDP on “Kinematics of Machines” during 9th June to 13th June 2003, at Kongu
Engineering College, Perundurai, Erode
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2012)
2 Days National
2
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011)
2 Days National
3
Workshop
Finite Element Analysis 2 Days Inter dept.
III rd Year
4
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2010)
2 Days National
5
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009)
2 Days National
6
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2008)
2 Days National
7
Conference
Emerging Trends in Mechanical Engineering and
Sciences (ETIMES - 2007)
2 Days National
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life Member in ISTE - LM 52941
 Life Member in TSI - LM 4169
Contributions to the Institution, Department and Society:
 Board of Studies Member
 Co-coordinator for Centre for Continuing Education
 ISTE convention office in-charge for the XII International Student Convention Chapter, 2009
 One of the coordinators for the Project Design Contest at FUTURA 2008
 One of the co-coordinators for the various national level conferences conducted (OPTEST
and ETIMES)
 One of the in-charge for the documentation committee (web page updating) of mechanical
engineering department
 Class advisor for both UG and PG students
 Metallurgy Lab in-charge
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : M Sivakumar
Designation : Associate Professor
Email ID : muthusivaa@gmail.com
Areas of Specialization : FEA, WEDM
Total Experience : Academic: 12 Years 8 Months Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Nil
Total (as on June 2012)
Teaching
1 SASTRA University,
Thanjavur Senior
Lecturer
12 July
1999
30th April
2007 8 years
2
Bannari Amman
Institute of Technology
Asst Prof(SG) 14th Sept
2007 30.04.12
4years
8 Months
Assoc Prof 1.05.12 Till date
Total (as on June 2012)
12 years
8 months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
Diploma
Mechanical / Automobile
Technology
Tamilnadu Technical Education
Board October1990
A.M.I.E. (I) Mechanical Institution of Engineers (INDIA) Winter 1996
M.E. Engineering Design Bharathiar University
December
1998
PhD
Process Parameter
Optimization of Wire Cut
Electric Discharge Machining
Anna University, Coimbatore Pursuing
Funded Projects : NIL
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications: Nil
Journals :
 The Optimal Cutting – Parameter Selection of Production Cost in Turning Operations
Using Genetic Algorithm” published in the Manufacturing Technology Today Journal of
CMTI , Bangalore, India -Volume 4 Issue 4 April 2005, p 8 – 13
 Conferences : 2
 “The micro factory and related developments” presented in the National conference on
ETIMES (Emerging Trends in MechanicalEngg. and Sciences) in December 2007 at BIT,
Sathyamangalam.
 “Parametric Optimization Of WEDM of OHNS – Die Steel”, Sixth National Conference on
Optimization Techniques In Engineering Sciences And Technologies, 15-16 April, 2011.
 “Optimizing The Machining Parameters of WEDM of HCHCR Steel”, Sixth National
Conference On Optimization Techniques In Engineering Sciences And Technologies, 15-16
April, 2011.
Books Published : Nil
Seminar, Conference, Workshop Attended: 16
1. 6
th
– 18th June 2011 : SDP on Computational Intelligence For Modeling And
 Optimization Of Manufacturing System, BIT.
2. 7
TH
– 8
TH Jan 2011 : Two day workshop on application of intelligent optimization
 Techniques using MATLAB, BIT
3. 19th
– 23rd Oct 2010 : ANSYS Training programme, Innovent Technologies Pvt., Ltd., I
 Cross, 10th main Indra nagar, Bangalore
4. 18th
– 19th Dec 2009 : Two day workshop on Research Methods and Tools for Engineering
 Faculty, BIT.
5. 04 – 05th Dec 2008 : National Foundry Conclave 2008, CII Coimbatore.
6. 19 - 20th Nov 2008 : FDP on Finite Element Analysis, BIT.
7. 11 – 12th July 2008 : Training Course on ISO 9001: 2000 Awareness & Internal Audit, BIT.
8. 18 - 24th June 2008 : STTP on Aerospace Engineering – Theory & Applications,
 SAINTGITS, Kottayam.
9. 07 - 08th
 June 2008 : Orientation programme for Research, AU Coimbatore.
10. 19 - 20 Dec 2007 : National Conference on ETIMES 2007, BIT.
11. 07th November 2007 : One day workshop on Nanotechnology and the Society, BIT.
12. 07- 11th Dec 2004 : Underwent a Basic Course in ANSYS in Unisoft India (P) Ltd.,
 Bangalore.
13. 18 - 19th Oct 2003 : National Seminar on INTELLECTUAL PROPERTY
 RIGHTS,SASTRA.
14. 10 - 11th Oct 2003 : National Seminar on Advances in CAD / CAM Technologies,
 AU Chennai.
15. 10 - 23rd Nov 2002 : Advances in NON – TRADITIONAL MACHINING& WELDING
 PROCESSES, KEC, Perundurai.
16. 26 - 28th April 2001 : National Workshop on APPROPRIATE TECHNOLOGY for
 SUSTAINABLE DEVELOPMENT, SASTRA
Seminar, Conference, Workshop Organized: 02
1. Coordinator - Two weeks FDP sponsored by AICTE on Reasearch methods and tools for
mechanical engineering faculty from May 31st to June 11th 2010.
2. Organised one day sensitisation cum awareness programme on Technology Information
 Facilitation sponsored by DSIR, New Delhi on 12th Dec 2007.
Ph.D Guidance / Supervisorship: NA
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
1. Corporate Member in The Institution of Engineers (India) – [AM 091552/4 ---- 111/MC]
2. Charted Engineer - The Institution of Engineers (India).
3. Life Member of Indian Society of Technical Education- [LM35501]
Contributions to the Institution, Department and Society:
 Coordinator Media Publicity Committee.
 Coordinator Muthamil Mantarm.
 Coordinator Citizen Consumer Club.
 In charge of CAD Lab
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : G Senthil Kumar
Designation : Associate Professor
Email ID : senthil_3142@yahoo.co.in
Areas of Specialization : Production
Total Experience : Academic: 11 Years and 3 Months Industry: Nil
S.
No Institution/Industry Design. Experience Total Years &
From To Months
Industry
- Nil -
Total (as on May 2012) Nil
Teaching
1
Bannari Amman Institute
of Technology,
Sathyamangalam
Lecturer 28.02.11 30.04.07
11 Years 3
Months
Sr. Lecturer 01.05.07 30.06.10
Assistant
Professor 01.07.10 30.04.11
Associate
Professor 01.05.11 Till date
Total (as on December 2011) 11 Years 3
Months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engineering Kongu Engineering College
Bharathiar April 1999
M.E. Production Engineering Government College of
Technology, Bharathiar Dec 2000
PhD Mechanical IRTT, Erode
AUT, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Recent
Photograph
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences :
1. J. Mohanraj, G Senthil Kumar & Dr K Balamurugan, “Wear and emission studies on
sunflower methyl ester blended with 2T lubricating oil ” Seventh National conference on
Optimization Techniques in Engineering Sciences & Technology (OPTEST 2012) Presented
at Department of mechanical Engineering, BIT, sathyamangalam on 20th and 21st April 2012.
2. G Senthil Kumar, Dr K Balamurugan, M Radhakrishnan, G Senthil Prabhu & S Vinu,
“Tribological study and emission analysis of 2 stroke lubrication oil blend with
sunflower methyl ester in petrol engines” Sixth National conference on Optimization
Techniques in Engineering Sciences & Technology (OPTEST 2011) Presented at
Department of mechanical Engineering, BIT, sathyamangalam on 15th and 16th April 2011.
3. G Senthil Kumar , Dr K Balamurugan, A G Sasikumar & P Subhash Chandran, “Productivity
Improvement in ASRS – A Case study” Fourth National conference on Optimization
Techniques in Engineering Sciences & Technology (OPTEST 2009) Presented at Department
of mechanical Engineering, BIT, sathyamangalam on 27-28 March 2009.
4. M Vykunta Rao & G Senthil Kumar, “Mathematical analysis of Cold Foil Rolling and
Neural Network Modelling” First National conference on Optimization Techniques in
Engineering Sciences & Technology (OPTEST 2006) Presented at Department of mechanical
Engineering, BIT, sathyamangalam on 11-12 April 2006.
5. M Nidheesh & G Senthil Kumar, “Design Management Using PDM Techniques” National
conference on Advances in Engineering Design(AED-2005) Presented at Department of
mechanical Engineering, BIT, sathyamangalam on 29 - 30 April 2005.
6. G Sasikumar and G. Senthil Kumar, “Development of 3-Dimensional Inventory Control
Model For Computerised Spare Parts Management”– A Case Study” International
Conference on Operation Research for Development (ICORD-2002), Presented at Anna
University, Chennai on 27-30 December 2002.
7. K L Senthil Kumar, G Sasikumar and G. Senthil Kumar, “Automatic Codification and
Computer Aided Inventory Management System (ACCAIMS)” - A Case Study”
International Conference on Operation Research for Development (ICORD-2002), Presented
at Anna University, Chennai on 27-30 December 2002.
Books Published : Nil
Seminar, Conference, Workshop Attended:
1. One day workshop on “Product Design Development” Conducted by Dept of Mech
 Engg., BIT, During 2nd Feb, 2002
2. One day work shop on “ Quality in Engineering education” Conducted by Dept of Mech
 Engg., Sri Krishna College Of Engineering and Technology, During Sep 21,2002
3. One week workshop on “Advanced methods in Non-Destructive Evaluation” conducted 
 by dept. of Mech & Metallurgical, IIT-Madras During 16th December to 20th Dec, 2002
4. One week work shop on “CNC Programming” Conducted by Dept of Mech Engg., BIT,
 During May 6 to May 10th, 2002
5. Two day work shop on “Engineering Mechanics” Conducted by Dept of Mech Engg., BIT,
 During June 20-21, 2003.
6. One week work shop on “Green Manufacturing Strategies for Process Industries”
 Conducted by Dept of Mech Engg., BIT, During March 29 to April 3, 2004.
7. One week work shop on “Strategies to improve Quality in Engineering Education”
 Conducted by Dept of Mech Engg., BIT, During May 24 to 29, 2004
8 . Two day work shop on “Applications of Radioisotopes and radiation Technology for
 Societal Development” Conducted by Anna university, Chennai, During July 13- 14, 2004.
9. Two day work shop on “Advances in Automotive Technology” Conducted by SME
 Collegiate branch, PSG College of Technology, Coimbatore, During Oct 23-24, 2005.
10. One week FDP on “Engineering Thermodynamics” Conducted by BIT,Sathy
 During May - June 2006.
11. Two weeks AICTE sponsored SDP on “ Recent developments in system design &
 optimisation” conducted by IRTT, Erode, During April 22 – May 05, 2007.
12. Two day work shop on “Recent Advances In Eco Friendly Lubricants (RAIEFL – 2010)”
 Conducted by IISc, Bangalore, During April 8 & 9, 2010.
13. Two weeks ISTE sponsored workshop on “ Heat Transfer “ conducted by IRTT, Erode
 during 29.11.2011 to 10.12.2011.
14. Two weeks AICTE sponsored SDP on “ Nano Materials – Synthesis, Characterization
 and Engineering Applications “conducted by IRTT, Erode, During 11.12.2011 to
 24.12.2011.
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2012)
2 Days National
2
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011)
2 Days National
3
Workshop
Product Design & Development 2 Days Inter dept.
III rd Year
4
Workshop
CNC Programming & Practice 2 Days Inter dept.
III rd Year
5
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2010)
2 Days National
6
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009)
2 Days National
7
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2008)
2 Days National
8
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2007)
2 Days National
9
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2006)
2 Days National
10
Short term course
Entrepreneurship Challenges & Developments in
Technical Education
2 Days National
11 Short term course
Time Compression Technology 1 week National
12 Short term course
Engineering Mechanics 2 Days National
13 One day programme on “Quality in Engineering
Education” 1 Day National
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life Member in ISTE - LM 37213
Contributions to the Institution, Department and Society:
 Board of Studies Member
 One of the staff incharge for Mechanical Engineering Student’s Association (MESA)
 Officer in-charge of University Examinations for both Bharathiar & Anna University Exams
since 2001
 One of the co coordinator for Transport during ISTE national Staff Convention Chapter, 2006
 One of the coordinators for the Department Projects exhibited during FUTURA 2008
 One of the organizing secretary & coordinators for the various national level conferences
conducted (OPTEST)
 Department academic co-coordinator for one year
 Deputy warden in men’s hostel for one year.
 Various committee incharges for FUTURA (Purchase, Souvenir, Transport & Refreshment)
 Project Coordinator
 Class advisor for UG students
 Instrumentation Lab in-charge
 Welding Lab in-charge
 Committee in charge for International conference (Sponsorship)
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : C. SASIKUMAR
Designation : Associate Professor
Email ID : csasibit@gmail.com
Areas of Specialization : Engineering Design, Tribology, Lubrication
Total Experience : Academic: 11 Years & 6 Months Industry: 5 Years & 1 Month
S.
No Institution/Industry Design. Experience Total Years &
From To Months
Industry
1
Shrri Laxmi Computerss
Systems, Erode. Programmer March 1997 May 1999 2 Years &
3 Months
2
ALPS Granites Limited,
Sathyamangalam
Production
Engineer July 1996 February
1997 8 Months
3
Pallavan Transport
Corporation, Madras.
Apprenticeship
Trainee July 1995 June 1996 1 Year
4
CRR Engineering Works,
Madras.
Maintenance and
Production
Engineer
May 1994 June 1995 1 Year &
2 Months
Total (as on June 2012) 5 Years &
1 Month
Teaching
1
Park College of Engineering
and Technology,
Coimbatore.
Lecturer January
2001 April 2001 4 Months
2
Bannari Amman Institute
of Technology Lecturer May2001 March 2005 3 Years &
11 Months
3
Bannari Amman Institute of
Technology Senior Lecturer April 2005 April 2010 5 Years
4
Bannari Amman Institute of
Technology Assistance
Professor May 2010 December
2011 8 Months
5
Bannari Amman Institute of
Technology
Assistance
Professor
(Selection
Grade)
January
2011 April 2011 4 Months
6
Bannari Amman Institute of
Technology Associate
Professor May 2011 Till Date 1 Year &
2 Months
Total (as on June 2012) 11 Years &
6 Months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engineering
Kongu Engineering College,
Perundurai – 638 052.
Bharathiar University
April 1994
M.E. Engineering Design
Kongu Engineering College,
Perundurai – 638 052.
Bharathiar University
December
2000
PhD Mechanical Anna University of Technology
Coimbatore, Coimbatore Pursuing
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals : Nil
Conferences :
 C.Sasikumar, B.Ilamathi and K.Balamurugan, Fuzzy Java Expert System Shell (FJESS) for
CNC Wire EDM Process, National Seminar on Recent Trends in Production and Industrial
Engineering, G. Pulla Reddy Engineering College, Hyderabad, December 9, 2002, pp.
154-158.
 C. Sasikumar P. Palanisamy and Dr. S. Shunmughasundram, National Seminar on “Analysis
of Flow induced Vibration using CFD”, Proceedings of “Digital Aided Modeling and
Simulation”, Coimbatore Institute of Technology, Coimbatore, January 6-9, 2003.
 C. Sasikumar, K.Balamurugan and B.Ilamathi, A Survey on Advanced Optimization
Techniques and its Industrial Applications, National Conference on Advanced
Manufacturing Technology, NSS College of Engineering, Palakkad, Feb. 15-16, 2003.
 C. Sasikumar, G. Sasikumar and Dr. K. Thirunavukkarasu, Co-ordinated Supply Chain
Design, National Conference on World Class Manufacturing, Amrita Institute of Technology,
Coimbatore, May 7-9, 2003.
Books Published : Nil
Seminar, Conference, Workshop Attended:
 Short-term course on Electrical Discharge Machining (EDM) Awareness at Bannari
Amman Institute of Technology, Sathyamangalam during April 24 - 26, 2002.
 Short-term course on CNC Programming at Bannari Amman Institute of Technology,
Sathyamangalam during May 6 - 10, 2002.
 One-day workshop on Quality in Engineering Education at Bannari Amman Institute of
Technology, Sathyamangalam on September 21, 2002.
 AICTE-ISTE Sponsored STTP on Total Productivity Improvement in Process Industries
through Automation at Bannari Amman Institute of Technology, Sathyamangalam during
March 30 - April 4, 2003.
 Faculty Development Programme on Kinematics of Machines conducted by Centre for
faculty development, Anna University, Chennai at Kongu Engineering College, Perundurai
during June 9 -13, 2003.
 Three-days Awareness Programme on Research Opportunities in Mechanical Engineering
Sciences (ROMES) at Bannari Amman Institute of Technology, Sathyamangalam during
November 21 - 23, 2003.
 AICTE-ISTE Sponsored STTP on Strategies to Improve Quality in Engineering Education
at Bannari Amman Institute of Technology, Sathyamangalam during May 24-29, 2004.
 One day Training Course on Quality System Awareness (ISO 9001 : 2000) on 11th April
2005 (Certificate Reference ZQT/003/05-06/035 – ZANDIG TQM Solutions Private Ltd.,
Coimbatore.) at Bannari Amman Institute of Technology, Sathyamangalam
 One day Training Course on Internal Quality Auditor (ISO 9001 : 2000) on 12th April 2005
(Certificate Reference ZQT/003/05-06/035 – ZANDIG TQM Solutions Private Ltd.,
Coimbatore.) at Bannari Amman Institute of Technology, Sathyamangalam
 One day User Conference & Exposition on Solid Works World India 2005, organized by
VECTRA FORM, Coimbatore at Hotel LeMeridian, Bangalore. on September 22, 2005
 STTP on Recent Trends in Industrial Automation at Bannari Amman Institute of
Technology, Sathyamangalam during October 21-22, 2005.
 Entrepreneurship and Development Course on Scope Of Profitable Cultivation of Jatropha
and Benefits of Biodiesel at Bannari Amman Institute of Technology, Sathyamangalam
during October 27-28, 2005.
 Second National Workshop on Inculcating Open Source Software Development and its use
in Multi-Disciplinary Engineering Domains organised by Open Source Initiative, PSG
College of Technology in collaboration with NRCFOSS AU-KBC Research Centre, during
March 8 – 9, 2007.
 Two days intensive training programme on Finite Element Analysis at Bannari Amman
Institute of Technology, Sathyamangalam during November 19-20, 2008.
 Tamil Nadu State Council for Science and Technology Sponsored One day National
Workshop on Nano and Micro Machining at Sona College of Technology, Salem-5, on 21st
Mat, 2010
 One day Training Course on ISO 9001 : 2008 Awareness on 2nd August 2010 (Certificate
Reference ZT/012/10-11/024 – ZANDIG TQM Solutions Private Ltd., Coimbatore.) at Bannari
Amman Institute of Technology, Sathyamangalam
 One day Training Course on ISO 9001 : 2008 Internal Audit on 3rd August 2010 (Certificate
Reference ZT/013/10-11/015 – ZANDIG TQM Solutions Private Ltd., Coimbatore.) at Bannari
Amman Institute of Technology, Sathyamangalam
 AICTE Sponsored Staff Development Programme on Visualization of SSS Materials at
Vivekanandha Institute of Engineering and Technology for Women, Tiruchengode – 637 205,
during May 16-29, 2011.
 Two days ISTE Workshop on Writing Effective Conference Papers Conducted by Indian
Institute of Technology Bombay on 18 – 19, February 2012.
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2006)
2 Days National
2
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2007)
2 Days National
3
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2008)
2 Days National
4
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2009)
2 Days National
5
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2010)
2 Days National
6
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2011)
2 Days National
7
Conference
Optimization Techniques in Engineering Sciences &
Technology (OPTEST 2012)
2 Days National
8
Workshop
CNC Programming 2 Days Inter dept.
IIIrd Year
9
Workshop
RC Car Workshop 2 Days Inter dept.
IInd Year
10
AICTE - ISTE Sponsored STTP on Time Compression
Technology at Bannari Amman Institute of Technology,
Sathyamangalam during March 31-April 5, 2004.
2 Days National
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
Guest Lectures Delivered : Nil
Topic Institution Date(s)
Membership in Professional Bodies:
 Life Member in Indian Society for Technical Education (I. S. T. E.) (Reg. No. LM33387)
 Life Member in The Indian Society for Advancement of Materials and Process Engineering
(I. S. A. M. P. E.) (Reg. No. L – 826)).
 Life Member in Systems Society of India (S. S. I.) (Reg No. T – 1302 / 97).
Contributions to the Institution, Department and Society:
 Department Books & Stationeries In charge from 2002 to till date
 Department Sports In charge 2004
 Strength of Materials Laboratory In charge from 2002 to 2005
 Engineering Design Centre Lab In charge from 2005 to 2007
 Basic Workshop In charge from 2007 to 2011
 Class Adviser for M.E. Engineering Design (2004 – 2006 Batch) & (2005 – 2007 Batch)
 Decoration committee member in FUTURA 2002, 2003 & 2004, 2005, 2006, Annual day
2005 and Convocation 2005 & 2006
 Department Time Table In charge from 2005 to 2008
 Board of Studies Member
 Department In charge for Examination
 In charge for M.E. Engineering Design
 Class Adviser for B.E. Mechanical Engineering A Section (2009 – 2013 Batch)
 ISTE Students Chapter – Department In charge 2009 & 2010
 Organising Secretary for the National Conference, “Optimization Techniques in Engineering
Sciences and Technologies (OPTEST 2006, OPTEST 2007, OPTEST 2008, OPTEST 2009,
OPTEST 2010 & OPTEST 2011)
 Coordinator for AICTE-ISTE Sponsored STTP on Time Compression Technology, March
2004.
 Coordinator for the Students Technical Contest METEORA 2009 in Students Technical
Symposium FUTURA 2009
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : M Ravikumar
Designation : Professor
Email ID : kumarmravi74@rediffmail.com
Areas of Specialization : Energy Engg., Heat Transfer
Total Experience : Academic: 12 Years and 03 Months Industry: 10 Months
S.
No Institution/Industry Design. Experience Total Years &
From To Months
Industry
1
South India Viscose
Limited, Sirmugai
Graduate
Engineer
Trainee
10.01.97 15.10.97 10Months
Total (as on June 2012) 10 Months
Teaching
1 Shanmugha, Thanjavur Lecturer 10.06.98 06.09.99 01 Year 03
Months
2
Bannari Amman Institute
of Technology,
Sathyamangalam.
Lecturer 28.02.2001 1.3.2006 02 Years 10
Months
3
Bannari Amman Institute
of Technology Senior
Lecturer 01.03.2006 01.09.09 03 Years 03
Months
4
Bannari Amman Institute
of Technology Assistant
Professor 01.09.2009 01.05.11 01 Year 08
Months
5
Bannari Amman Institute
of Technology,
Sathyamangalam
Associate
Professor 01.05.11 31.05.2012 01 Year
6
Bannari Amman Institute
of Technology,
Sathyamangalam
Professor 01.06.12 Till date ---
Total (as on June 2012)
13 Years 03
Months
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. Mechanical Engineering
Coimbatore Institute of
Technology, Coimbatore. April 2000
M.Tech Energy Engineering Regional Engineering College,
Bharathidasan University Dec’ 2001
PhD Mechanical Anna University, Chennai --
Funded Projects : Nil
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
 ---- ----- ---- ----- -----
Consultancy Work : Nil
S. No. Organization/
Agency Nature of Work Amount in Rs. Year
Patents (Specify the details) : Nil
Publications : Nil
Journals :
1. Ravikumar M and Srinivasan PSS. (2008) ‘Phase Change Material as a Thermal Storage
 Material for Peak Load Shifting’, Indian Journal of Engineering, Science, and
Technology, Vol. 2, No. 1, pp. 17-21.
2. Ravikumar M and Srinivasan PSS. (2008) ‘Natural Cooling of Building Using Phase
Change Material’, International Journal of Engineering and Technology, Vol. 5, No. 1,
pp. 1-10.
3. Ravikumar M and Srinivasan PSS. (2008) ‘Phase change material as a thermal energy
storage material for cooling of building’, Journal of Theoretical and Applied Information
Technology, Vol. 4, No. 6, pp. 503-511.
4. Ravikumar M and Srinivasan PSS. (2012) ‘Analysis of Heat Transfer Across Building Roof
with Phase Change materials’ Journal of Computational Information Systems, Vol. 8, No.4,
pp.1497- 1505.
5. Ravikumar M and Srinivasan PSS. (2012) ‘Analysis of heat transfer across PCM filled
RCC roof for Thermal Management’ Journal of Mechanical Engineering Science, Accepted
for publication.
Conferences :
1. Presented paper on Future trends in Mechanical Engineering conference organized by
bharath Institute of technology, Chennai, titled, “Refinement and retrofitting of petrol
engine with diesel as fuel” during December 13-14, 2002.
2. Presented paper in Future trends in Mechanical Engineering conference organized by bharath
Institute of technology, Chennai, titled, “Digital process optimization through finite element
Analysis technique” during December 13-14, 2002.
3. Presented paper titled ”Steam management in Textile mills”, at National conference
organized by NCUTE in coordination with Textile Department of BIT, Sathyamangalam.
4. Paper titled, “Phase change energy storage with PCM : Materials and Applications”, in
the National Conference conducted by Kongu Engineering College, Perundurai, Erode.
5. Paper titled, “Enhancement of Aerodynamic characteristics in Automobiles” in the 7
th
National Conference on Optimization techniques in Engineering sciences and Technologies
conducted by Bannariamman Institute of Technology during 20-21 April 2012.
6. Paper titled, “Extended steady rest for short length edge preparation in SAFOP machine”
in the 7
th National Conference on Optimization techniques in Engineering sciences and
Technologies conducted by Bannariamman Institute of Technology during 20-21 April 2012.
Books Published : Nil
Seminar, Conference, Workshop Attended:
 Attended STTP on “CNC Programming – Lathe & Milling”, during May 6 - 10, 2001, BIT.
 1week FDP Conducted by TTTI, Chennai ( May27 – June 3, 2002), BIT
 1week FDP Conducted by TTTI, Chennai ( 2003), BIT
 1week STTP on “ Renewable Energy Sources and Conversion Technology “, Conducted
by C.I.T, Coimbatore
 2 week STTP on “CFD-With specific application to Food Industries“, conducted by Kongu
Engineering college, Erode.
 One day awareness programme on, “Quality Systems – ISO 9001:2000”, at BIT.
 Two day training on, “Internal Audit”, during May 2003, at BIT.
 One day STTP on, “Energy Building”, conducted by Kumaraguru college of Engg &
Technology, coimbatore.
 1 week AICTE- ISTE short term course on “Advanced Energy Technologies “, conducted by
I.I.T, Chennai, Madras.
 One day course on “ Renewable energy- Energy of the future” Conducted by SRIT,
Coimbatore.
 One day course on “Research methodology for college teachers”, conducted by PSG College
of technology.
 Two day FDP on “Finite element analysis” conducted by BIT.
 Two day FDP on “Quantitative techniques for research” conducted by KEC, Erode
 Three day National conference on “Managing technical education for leveraging innovation
and entrepreneurship” during December 18-20, 2009 conducted by NITK, Surathkal.
 Two day FDP on “Advances in Automotive Engineering” during February 25-26, 2011,
conducted by BIT.
Seminar, Conference, Workshop Organized:
S.No. Title Duration Level (Intern./
National)
1
Seminar
Biomass Gasifier Component Design 1 Day Inter College
2
Seminar
RENEW’07 1 Day Inter College
3
Seminar
Renewable Energy- Present scenario in India 1 Day Inter College
4
Seminar
Solar Energy appliances and its usages 1 Day Inter College
5
Workshop
Exploring the Rural Wealth 1 Day National
6
Workshop
Environmental modeling and simulation 3 Days National
7
Conference
The Industrial Applications of Biomass Gasifier Buyer
Seller Meet
1 Day National
8
Workshop
REFCON 2002 3 Days National
Ph.D Guidance / Supervisorship: Nil
Name of Scholar Course Area of Research Status
--
Guest Lectures Delivered :
Topic Institution Date(s)
Steam management in Textile
mills
Bannari Amman Institute of Technology 19.07.02
Membership in Professional Bodies:
 Life Member in ISTE - LM 37211
Contributions to the Institution, Department and Society:
 Board of Studies Member
 Department Documentation Incharge
 ISTE students chapter Faculty Incharge in 2009.
 Staff Adviser for the Mechanical Engineering students Association (MESA), 2004
 Class adviser in 2002, 2003, 2005
 ISO staff incharge for mechanical Engineering department from 2005 to till date.
 Energy club Faculty Incharge in 2006.
 Thermal Engineering Lab in-charge
Awards and Recognitions : Nil
Visits Abroad : NilPROFILE
Name : K Sivakumar
Designation : Professor & Head
Email ID : ksk71@rediffmail.com
 sivakumark@bitsathy.ac.in
Areas of Specialization : Production Engineering
Total Experience : Academic: 19 years Industry: Nil
S.No Institution/Industry Design. Experience Total Years &
Months From To
Industry
Nil
Total (as on June 2012)
Teaching
1
Government College of
Engineering, Tirunelveli. Lecturer 15.12.1993 14.08.1995 1 Year &
8 Months
2
J.J College of
Engineering &
Technology,
Tiruchirappalli
Lecturer 13.09.1995 31.10.1998 3 years
Asst.
Professor 01.11.1998 31.05.2005 6 Years &
6 Months.
Professor 01.06.2005 30.06.2007 1 Year &
2 Months
3
Bannari Amman
Institute of Technology,
Sathyamangalam.
Professor 02.07.2007 04.08.2011
4 years &
1 Month
Professor &
Head 05.08.2011 Till date
Total (as on June 2012) 19 years
Educational Qualification :
Degree Branch / Specialization University Year of
Passing
B.E. B.E (Mechanical) Madurai Kamaraj University ,
Madurai 1993
M.Tech
M.Tech.(Quality Assurance
Tech) Bharathidasan university 1998
PhD Production Engineering Bharathidasan university 2006
Funded Projects :
S. No. Funding Agency Topic
Amount
Sanctioned in
Rs.
Year of
Sanction
1
All India Council
for Technical
Education,
Government of
India
Remote Analysis of Wire EDM Rs 10 Lakhs
2009 - 2012
2
All India Council
for Technical
Education,
Government of
India
Staff Development Programme
on “Research Methods And
Tools for Mechanical
Engineering Faculty”
Rs 7 Lakhs
31.05.2101
to
11.06.2010
3
All India Council
for Technical
Education,
Government of
India
Design Development and
Testing of Novel Double acting
Power take off system for
Ocean wave energy conversion
Rs 8.30 Lakhs 2010 -2012
4
All India Council
for Technical
Education,
Government of
India
Staff Development Programme
“Computational Intelligence for
Modeling and Optimization of
Manufacturing System”
Rs 7 Lakhs
06.06.2011
to
18.06.2011
5
All India Council
for Technical
Education,
Government of
India
Investigation of Wire Electrode
Vibration of Dry wire cut
Electrical Discharge Machine
Rs 10 Lakhs 2012-2014
Consultancy Work :
S.
No. Organization/ Agency Nature of Work Amount in Rs. Year
1
Nataraj Pencils,
Pollachi
Design and Development of
color lead double extrusion
Cylinder Nozzle 25,000 11.07.11 to
01.10.11
Patents (Specify the details) : Nil
Publications
Journals :
International Journals
1. K. Sivakumar, G. Jayaprakash “Tolerance Design of Mechanical Assembly Using NSGA II
and FEA”, accepted for publication in international journal of Journal of Mechanical Science
and Technology,Springer,2012.
2. K. Sivakumar, M.Thilak, “Optimal selection of Machining datum and machining tolerance
allocation through tolerance charting”, accepted for publication in International Journal of
Manufacturing Technology and Management, Inderscience, 2012
3. K. Sivakumar, M.Thilak “Selection of Machining Datum and Allocation of Tolerance through
Tolerance Charting Technique”, Chinese Journal of Mechanical Engineering Published in
Vol.25, No.4, 2012.
4. K. Sivakumar, G. Jayaprakash, “FEA complaint parametric tolerance allocation of mechanical
assembly using neural network and differential evolution algorithm”, published in International
Journal of Computer Integrated Manufacturing, Available on line 15 Mar 2012.
5. K. Sivakumar, S.Dhanabalan, “Optimization of EDM Process Parameters with Multiple
Performance Characteristics for Titanium Grades” published in European Journal of Scientific
Research, ISSN 1450-216X Vol.68, No.3(2012), pp.297-305.
6. K. Sivakumar, S.Boopathi, “Experimental Comparative study of Near – Dry wire cut Electrical
Discharge Machining (WEDM)”, published in European Journal of Scientific Research.Vol.75,
No.4 (2012), PP.472-481.
7. K. Sivakumar, G.Paulraj, “Geometric error control of workpiece during drilling through
optimization of fixture parameter using a genetic algorithm”, Published in International Journal
of Production Research (IJPR)Available online 8th Auguest,2011
8. K. Sivakumar, C. Balamurugan, “Evolutionary multi-objective concurrent maximisation of
process tolerances”, published online in International Journal of Production Research
(IJPR), 2011.
9. K. Sivakumar, G. Jayaprakash, “Integration of Thermo Mechanical strain into optimal
tolerance design of Mechanical assembly using NSGA II and FE simulation”, published
in Journal of Mechanical Engineering Research, June 2011, Vol 3 (6) pp168.
10. K. Sivakumar, C.Balamurugan and S. Ramabalan “Evolutionary advanced multi objective
concurrent tolerance design of mechanical assemblies”, published in Journal of
Manufacturing Technology Research, Nova Publisher, Inc, USA, 2011, Volume 3, issue 1-2.
11. K Sivakumar, G. Jayaprakash, “Parametric Tolerance Analysis of Mechanical Assembly
Using FEA and Cost Competent Tolerance Synthesis Using Neural Network”
J.Software Engineering & Applications, December 2010, Volume.3, issue.12, pp. 1148-1154
12. K Sivakumar, C Balamurugan, S Ramabalan, “Simultaneous Optimal Selection of Design
and Manufacturing Tolerances with Alternative Manufacturing Process Selection”,
published in Journal of Computer Aided Design 43,2011, Volume.43, issue.2, pp.207-218
13. K Sivakumar, C Balamurugan, S Ramabalan, "Concurrent multi objective tolerance
allocation of mechanical assemblies considering alternative manufacturing process
selection" published in the International Journal of Advance Manufacturing Technology
(IJAMT), Springer, UK,2011, volume 53, issue 5, pp.711 – 732.
14. K Sivakumar, C Balamurugan, “Evolutionary concurrent multi objective optimal tolerance
allocation and alternative manufacturing process selection for mechanical
assemblies”, published in the International Journal of Mechatronics and Intelligent
Manufacturing (IJMIM), Nova Publisher, Inc, USA,2010,. volume I, issue 1-2 ,pg 75-94
15. K Sivakumar, G. Jayaprakash, “Parametric Tolerance Analysis of Mechanical Assembly
by Developing Direct Constraint Model in CAD and Cost Competent Tolerance
Synthesis”, published in the Journal of ‘Intelligent control and Automation’ Scientific and
research Publishers,2010, 1, pp.1-14.
16. K Sivakumar, G.Paulraj, “Genetic Algorithm based deformation control and clamping
force optimization of workpiece fixture system”, Published in the International Journal of
Production Research (IJPR), Taylor & Francis, 2010, Volume.49, issue.7, pp.1-33,.
17. K. Sivakumar, C. Balamurugan and S. Ramabalan, , “Evolutionary sensitivity-based
conceptual design and tolerance allocation for mechanical assemblies”, published in the
International Journal of Advance Manufacturing Technology (IJAMT), Springer, UK, 2010
Vol.8, pp.307-324.
18. K Sivakumar, C Balamurugan, “Allocation of Optimal Tolerances in a Mechanical
Assembly using DE and NSGA- II”, published in the International Journal of Computer
Application in Technology (IJCAT), Inder Science Publisher, 2010, Vol. 37, issue.1,
pp. 48-58. 
19. K Sivakumar, A. Noorul Haq and R. Saravanan, “Hybrid Cost Tolerance Model: An
Approach To Machining Tolerance Synthesis”, published in International Journal of
manufacturing Science and Technology (IJMST),2009 Vol 10, issue.2, PP.17.
20. K Sivakumar, A. Noorul Haq and R. Saravanan, “Tolerance Design For Least Machining
Cost Using Non Conventional Techniques”, Published in International Journal of
manufacturing Science and Technology (IJMST), 2009 Vol. 10,issue.1, PP.37.
21. K Sivakumar, C Balamurugan, “Concurrent design for nominal and tolerance analysis
and allocation of mechanical assemblies using DE and NSGA-II”, published in the
International Journal of Manufacturing Technology and Management (IJMTM), 2009, Vol.18
No.1, pp.15-33
22. K Sivakumar, R Saravanan and A.Noorul Haq, “Cost – Tolerance Modeling and
Optimization of Machining Tolerance Design through Intelligent Techniques”, published
in the International Journal of Machining and Machinability of Materials (IJMMM), Inder
Science Publishers, March 2008, Vol. 3, issue. Nos 1-2 , pp. 162-189
23. A. Noorul Haq, K Sivakumar and R. Saravanan, “Optimal Tolerance allocation with multi
objective functions using intelligent Techniques”, Published in International Journal of
Manufacturing Technology and Research (IJMTR), 2008, vol 4, issue No.2.
24. A. Noorul Haq, K Sivakumar and R. Saravanan “Genetic Algorithm (GA) based tolerance
allocation with multi objective functions”, Published in International Journal of
Manufacturing Science and Technology (IJMST) 2007, Vol. 9, issue No.2, pp. 129.
25. A. Noorul Haq, K Sivakumar and R. Saravanan, “Modeling and Optimization of Machining
Tolerance Design through Intelligent Techniques”, Published in International Journal of
Manufacturing Science and Technology (IJMST) 2007, Vol 9, issue No.2, pp.21.
26. A. Noorul Haq. K Sivakumar and R. Saravanan, K. Karthikeyan, “Particle Swarm
Optimization(PSO) Algorithm for optimal machining Allocation of clutch assembly”,
International Journal of Advanced Manufacturing Technology(IJAMT), March 2006, Vol
27,pp.865-869
27. A. Noorul Haq. K Sivakumar and R. Saravanan “Tolerance design optimization of machine
elements using GA”, published in International Journal of Advanced Manufacturing
Technology (IJAMT), 2005, Vol 25, pp.305-309.
National Journals:
1. A. Noorul Haq. K Sivakumar and R. Saravanan “Optimization of Tolerance Allocation of
Machine Element using Genetic Algorithm”, in journal of Manufacturing Technology Today
(MTT), 2006, Vol 5, issue 12, PP. 23-28.
2. K Sivakumar, G Paulraj, “Deformation control of work piece during drilling through
optimization of Fiture parameter”, published in Journal of Emerging Technology in
Mechanical Science and Engineering, Vol 1,No.2,pp.23-31,2010.
Conferences :
International conferences:
1. K Sivakumar, “Micrgraph analysis of contact point region in work piece – fixture
system” in the 3rd International and 24th All India Manufacturing Technology Design and
Research Conference at Andhara University College of Engineering(A) Andhara University,
Andhara Pradesh, India during 13-15 December, 2010.
2. K Sivakumar, “Deformation control of work piece during drilling through Optimization of
fixture parameter using Genetic Algorithm” in the 3rd International and 24th All India
Manufacturing Technology Design and Research Conference at Andhara University College
of Engineering(A) Andhara University, Andhara Pradesh ,India during 13-15 December, 2010.
3. K Sivakumar, “Optimization of EDM parameter for Iconel 718 using L18 array with Grey
relational analysis” in the 3rd International and 24th All India Manufacturing Technology
Design and Research Conference at Andhara University College of Engineering(A) Andhara
University, Andhara Pradesh, India during 13-15 December, 2010.
4. K Sivakumar, “The use of Orthognal array with Taguchi technique to optimize the
Electrical Discharge Machining process with multiple performance characteristics for
Titanium grades” in the International conference on Advances in Industrial Engineering
Applications (ICAIEA 2010) at Department of Industrial Engineering, Anna University Chennai,
India during 6-8 January, 2010.
5. K Sivakumar, “Multiple Performance Characterstic Optimation of EDM Parameters Using
Robust Technique for Titnium Alloy” in the International conference on Latest trends in
simulation Modelling and Analysis (COSMA 2009) at NIT Calicut, India during 17-19
December, 2009.
6. K Sivakumar, “Sustainable Tolerance design of complaint Assembly considering inertia
effects and with Minimum quality loss Function” in the 7th Global conference on
sustainable Manufacturing on Sustainable product Development and Life cycle Engineering at
IIT, Madras, Chennai during 2-4, December 2009.
7. K Sivakumar, “Optimal concurrent dimensional and geometrical tolerancing based on
evolutionary algorithm” in the World congress on nature and biologically inspired
computing (NaBIC) at Coimbatore during 9-11 December 2009.
8. K Sivakumar, “Optimal cost Tolerance allocation through Tolerance charting using non
conventional optimization techniques” in the International Conference on Total
Engineering, Analysis and Manufacturing Technologies at Bangalore University, Bangalore
during 19-21 November 2009.
9. K Sivakumar, “Multiple performance characterstic optimization of EDM parameters
using orthogonal array and Neural Network for Titanium alloy” in the International
Conference on Total Engineering, Analysis and Manufacturing Technologies at Bangalore
University, Bangalore during 19-21 November 2009.
10. K Sivakumar, “Multiple objective Tolerance Design optimization using evolutionary
algorithm” in the International Conference on Total Engineering, Analysis and
Manufacturing Technologies, at Bangalore University, Bangalore during 19-21 November
2009.
11. K Sivakumar, “Multiple performance characteristic optimization EDM parameters using
intelligent technique for Titanium alloy” in the International Conference on Total
Engineering, Analysis and Manufacturing Technologies at Bangalore University, Bangalore
during 19-21 November 2009.
12. K Sivakumar, “Multi objective oprimization of EDM parameter uses Grey relational
analysis for Titanium Alloy” in the Indo Japan Conference on Advances in Materials
Processing at Department of Manufacturing Engineering, Annamali University, Tamilnadu
during September 30 – October 2nd 2009.
13. K Sivakumar, “Electrode Position of Copper-tin-an Analysis Model Based on Artificial
Neural Network (ANN)” in the 2nd International and 23rd All India Manufacturing Technology
Design and Research Conference at Department of Mechanical Engineering, IIT, Chennai
during 15-17, December 2008.
14. K Sivakumar, “Prediction of Contact Pressure Distribution in Clamping and Locator
Element Surfaces of Work Piece Fixture System” in the 2nd International and 23rd All India
Manufacturing Technology Design and Research Conference at Department of Mechanical
Engineering, IIT, Chennai during 15-17, December 2008
15. K Sivakumar, “Minimum Cost Tolerance Allocation Through Tolerance Charting
Technique Using Non – Conventional Optimization Technique” in the 2nd International
and 23rd All India Manufacturing Technology Design and Research Conference at Department
of Mechanical Engineering, IIT, Chennai during 15-17, December 2008.
16. K Sivakumar, “Evolutionary Simultaneous Optimal Selection of Design and
Manufacturing Tolerance with Stack up Condition Using Differential Evolution (DE)” in
the 2nd International and 23rd All India Manufacturing Technology Design and Research
Conference at Department of Mechanical Engineering, IIT, Chennai during 15-17, December
2008.
17. K Sivakumar, “Tolerance Synthesis by Neural Learning Non-Dominated Sorting Genetic
Algorithm II and CAD Interface” in the 2nd International and 23rd All India Manufacturing
Technology Design and Research Conference at Department of Mechanical Engineering, IIT,
Chennai during 15-17, December 2008.
18. K Sivakumar, “Tolerance Synthesis by Neural Learning Non-Conventional optimization
Techniques” in the International Conference on Advances in Mechanical Engineering at
Department of Mechanical Engineering, IISc, Bangalore during 2 – 4, July 2008
19. K Sivakumar, “Evolutionary Optimal Tolerance Analysis and Allocation of Mechanical
Assemblies Using Various Models” in the International Conference on Advances in
Mechanical Engineering at Department of Mechanical Engineering, IISc, Bangalore during 2 –
4, July 2008.
20. K Sivakumar, “Tolerance Allocation Through Tolerance Charting Technique Using Non
Conventional Optimization Techniques” in the International Conference on Advances in
Mechanical Engineering at Department of Mechanical Engineering, IISc, Bangalore during 2 –
4, July 2008.
21. K Sivakumar, “Optimization of Clamping Configuration using Finite Element Analysis in
Work Piece Fixture System” in the International Conference on Advances in Mechanical
Engineering at Department of Mechanical Engineering, IISc, Bangalore during 2-4, July 2008.
22. K Sivakumar, “Analysis and Allocation of Optimal Tolerance in Mechanical Assemblies
Using DE and NSGA – II” in the international conference on Computer Aided Engineering, at
Department of Mechanical Engineering, Indian Institute of Technology, Madras, Chennai
during 13-15 December, 2007.
23. K Sivakumar, “Neural Network Based Cost Tolerance Analysis” in the International
Conference on Advances in Manufacturing Engineering – 2007 (ICAME-2007) at Department
of Mechanical and Manufacturing Engineering , Manipal Institute of Technology, Manipal –
576 104, Karnataka, India during 24-26 October 2007.
24. K Sivakumar, “Analysis of Deformation of Prismatic Component using FEA” in the
International Conference on Advances in Manufacturing Engineering – 2007 (ICAME-2007) at
Department of Mechanical and Manufacturing Engineering , Manipal Institute of Technology,
Manipal – 576 104, Karnataka, India during 24-26 October 2007.
25. K Sivakumar, “Analysis and Allocation of Tolerance in Mechanical Assemblies Based on
Percent Contribution Using DE and NSGA –II” in the International conference on advances
in manufacturing engineering – 2007 (ICAME - 2007) at Department of Mechanical
Engineering, Manipal Institute of Technology, Manipal – 576 104, Karnataka, India during 24-
26, October2007.
26. K Sivakumar, “six sigma approach for effective process chain in a manufacturing
industry”, in the TEAM TECH 2007, at IISc, Bangalore during 4-6, October 2007.
27. K Sivakkumar, “Multiple Robots Trajectory Planning to Avoid Collision Using NSGAII”,
in the TEAM TECH 2007, at IISc, Bangalore during 4-6, October 2007.
28. K Sivakumar, “Analysis of Work Piece Error Using Coordinate Measuring Machine”, in
the TEAM TECH 2007, at IISc, Bangalore during 4-6, October 2007.
29. K Sivakumar, “Cost – Tolerance Analysis Model for Form Tolerance Based on Neural
Networks Method”, in the TEAM TECH 2007, at IISc, Bangalore during 4-6, October 2007.
30. K Sivakumar, “Optimal Tolerance Analysis and Allocation Of Kinematics Linkages
Considering Position Errors”, in the TEAM TECH 2007, at IISc, Bangalore during 4-6
October 2007.
31. K Sivakumar, “Analysis and Allocation of Tolerance In Mechanical Assemblies Based on
Mean Shift Model Using DE”, in the TEAM TECH 2007, at IISc, Bangalore during 4-6
October 2007.
32. K Sivakumar, “Optimal Tolerance Allocation With Alternate Machining Processing Using
GA”, in the TEAM TECH 2007, at IIsc, Bangalore during 4-6 October 2007.
33. K Sivakumar, “Particle Swarm Optimization (Pso) Algorithm For Optimal Machining
Tolerance Allocation Problem”, in the EISCO, at Kumaraguru college of Technology,
Coimbatore during 5-7, January 2005.
34. K Sivakumar, “Design optimization of tolerance for overrunning clutch assembly using
genetic algorithm (GA)”, a Sixth International Conference of the Association of Asia Pacific
Operational Research Societies (APORS 2003) held at Hotel Grand Intercontinental, New
Delhi during 8-11 December, 2003.
35. K Sivakumar, “Design optimization of Tolerance for machine elements using Genetic
Algorithm”, a International Conference on Digital Aided Modeling and Simulation at
Coimbatore Institute of Technology,(CIT) during January 6-8 2002.
36. K Sivakumar, “Design Optimization Tolerances for Gear trains using Genetic Algorithm”,
a International Conference on Operation Research for Development at Anna University,
Chennai during 27-30, December 2002.
37. K Sivakumar, “Design optimization of tolerances for Assemblies using genetic
Algorithm” an conference in e-Manufacturing: An emerging need for 21st century world
class enterprises, Organized by the Institution of Engineers (India) M.P State center, Bhobal
at Maulana Azad National Institute of Technology , Bhobal during 17-19, Nov 2002.
National conferences:
1. K Sivakumar, “Optimal Tolerance design by integrating CAD, Finite element analysis
and Non Dominated sorting Genetic Algorithm II” National Conference on Advanced
Manufacturing Techniques NCAMT - 2009, organized by Department of Mechanical
Engineering, Shri Mata Vaishno Devi University, Kata, J&K during 5-6, November 2009.
2. K Sivakumar, “Multi Objective Optimization of EDM Parameters Using Grey Relational
Analysis for Titanium Alloy” National Conference on Optimization Techniques in
Engineering Science and Technologies, OPTEST 2009, organized by Department of
Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam during
27-28, March 2009.
3. K Sivakumar, “Multi Objective Optimal Tolerance Allocation and Process Selection for
Mechanical Assemblies Using Evolutionary Algorithms” National Conference on
Optimization Techniques in Engineering Science and Technologies, OPTEST 2009,
organized by Department of Mechanical Engineering, Bannari Amman Institute of Technology,
Sathyamangalam during 27-28, March 2009.
4. K Sivakumar, “Evolutionary Concurrent Multi Objective Optimal Dimensional and
Geometrical Tolerance Balancing for Mechanical Assembly” National Conference on
Optimization Techniques in Engineering Science and Technologies, OPTEST 2009,
organized by Department of Mechanical Engineering, Bannari Amman Institute of Technology,
Sathyamangalam during 27-28, March 2009.
5. K Sivakumar, “Multi Objective Optimal Tolerance Design of Mechanical Assembly Based
Evolutionary Algorithms” National Conference on Optimization Techniques in Engineering
Science and Technologies, OPTEST 2009, organized by Department of Mechanical
Engineering, Bannari Amman Institute of Technology, Sathyamangalam during 27-28, March
2009.
6. K Sivakumar, “Optimization of Electrode Wear and Material Removal Rate in Electrical
Discharge Machining Using Genetic Algorithm and Non Dominated Sorting Genetic
Algorithm” National Conference on Optimization Techniques in Engineering Science and
Technologies, OPTEST 2009, organized by Department of Mechanical Engineering, Bannari
Amman Institute of Technology, Sathyamangalam during 27-28, March 2009.
7. K Sivakumar, “Analysis of Manufacturing Eror of the Features in work piece in the
Fixture System” National Conference on Emerging Trends in Mechanical Engineering and
Sciences ETIMES 2007, Mechanical Engineering, Bannari Amman Institute of Technology,
Sathyamangalam, TamilNadu during 19-20 December 2007.
8. K Sivakumar, “Differential Evolution Based Tolerance Allocation Through Tolerance Charting
Techniques” National Conference on Emerging Trends in Mechanical Engineering, Bannari
Amman Institute of Technology, Sathyamangalam, TamilNadu. during 19-20 December 2007.
9. K Sivakumar, “Optimization of Draw Bead Geometry and Position on Cup Drawing Die
Surface – Experimental and Numerical Investigation” National Conference on Emerging
Trends in Mechanical Engineering and Sciences ETIMES 2007, Mechanical Engineering,
Bannari Amman Institute of Technology, Sathyamangalam, TamilNadu during 19-20
December 2007.
10. K Sivakumar, “Optimal Tolerance Analysis and Allocation of Kinematics Linkages
Through Modified Statistical Method Using DE and NSGAII” National Conference on
Emerging Trends in Mechanical Engineering and Sciences ETIMES 2007, , Mechanical
Engineering, Bannari Amman Institute of Technology, Sathyamangalam, TamilNadu, during
19-20 December 2007.
11. K Sivakumar, “Optimization of Drilling Parameters of Composite using PSO” National
Conference on Contemporary Approachs in Design and Manufacturing (CADAM ‘07’) at
ACCET, Karaikudi, during 26-27, April, 2007
12. K Sivakumar, “Sensitivity Based Machining Tolerance Optimization Using DE
Techniques” National Conference on Contemporary Approachs in Design and Manufacturing
(CADAM ‘07’) at ACCET, Karaikudi, during 26-27, April, 2007.
13. K Sivakumar, “A Simple Genetic Algorithm based tolerance allocation through tolerance
charting techniques” National conference on recent development in production &
Operations Management, at Annamalai Univeristy, during 23-24, 2007.
14. K Sivakumar, “Tolerance Synthesis Through Particle Swarm Optimization (PSO)”,
National Conference on Contemporary Approaches in Design and Manufacturing, at ACCET,
Karaikudi, on April 21st 2006.
15. K Sivakumar, “TABU and PSO based Component Tolerance Design for Minimum Quality
Loss and Manufacturing Cost”, National Conference on Contemporary Approaches in
Design and Manufacturing, at ACCET, Karaikudi, on April 21st 2006.
16. K Sivakumar, “Optimization of Tolerance allocation of Machine Elements using non
conventional Techniques”, National Conference on Advances in Engineering Design (AED
2005), at Bannari Amman Institute of Technology, Sathyamangalam, Erode, between 29-03
Apr 2006.
17. K Sivakumar, “Particle Swarm Optimization (PSO) algorithm for the machining tolerance
allocation of piston cylinder assembly”, National Conference of All India Machine Tool
Design and Research (AIMTDR), held at VIT, Vellore, during 20-23 Dec 2004.
18. K Sivakumar, “Quality Management using 5S” national Conference on Mapping for
Excellence: Challenge ahead held at Pioneer Institute of Professional studies, Indore, M.P.
during 22 - 23 Aug 2002
19. K Sivakumar, “Design optimization of tolerance for overrunning clutch assembly using
Particle Swarm Optimization”, National Conference Modeling and Analysis of Production
System (MAPS 2003) held at NIT, Trichy, during 22-23, Dec 2003.
20. K Sivakumar, “Software Quality Assurance” National seminar on Total Quality Management
held at Sona College of Technology, Salem, on 23rd Oct, 2002.
21. K Sivakumar, “Quality Management Techniques”, a National Conference on Recent trends
in Manufacturing Technology and Management at Adhiyamaan College of Engineering,
Hosur, between 28-29 January 2002.
22. K Sivakumar, “Quality Assurance Mechanism in Technical Educational Institution” ISTE
National convention at Kalinga Institute of Technology, Bhubaneswar, Orissa, during 27-29
Dec 2001.
23. K Sivakumar, “Three Dimensions of TQM”, a National Conference on Advanced trends in
Mechanical Engineering Research and Development (MINAC 2001)” at JNTU college of
Engineering, Anathapur (AP) on 18th October 2001.
Seminar, Conference, Workshop Attended:
1. Attended one day “Southern Region Conclave on Valve Technology 2012”, organized by
CII, Coimbatore, during 18th May 2012.
2. Attended Two days “Faculty Mission” at Bangalore organized by CII during 10 - 11 February
2011.
3. Attended Orientation programme on “Industrial Expectation” held at College of Engineering,
Guindy, Anna University Chennai, during 15-16 September 2009.
4. Attended Three day International conference on “Global Recession –An Opportunity for
Business Incubation” organized by Asia Pacific Incubators Network during 6-8 August 2009
at coimabtore.
5. Attended one day workshop on “Research Update” for the supervisors on 6
th June 2008 at
PSG College of Technology, organized by Anna University, Coimbatore.
6. Attended one day National seminar on “ INDO GERMAN workshop on Micro System for
automotive and Machine tool Industries” held at PSG college of technology, Coimbatore ,
on 13th February 2008.
7. Attended one day work shop on “Nano Technology and Society” organized by German
Returnees Association, IIT Madars, and Bannari Amman Institute of Technology,
Sathyamangalam, on 17th December 2007. 
8. Attended two weeks short term training programme on “Modeling and Non – Conventional
Techniques” during 10.11.2003 to 21.11.2003 at J. J. College of Engg., Tech., Trichy.
9. Attended two weeks short term training programme on “Modeling and Optimization of
Manufacturing system using conventional and non-conventional Techniques” during
10.11.2003 to 21.11.2003 at J.J.college of Engg & Tech , Trichy.
10. Attended “33rd Annual convention & National seminar of ISTE” during 27-30Dec 2003 at
Kumaraguru college of Technology , coimbatore , Tamilnadu.
11. Attended two days seminar on “Rapid Proto Type”, at HAL ,Bangalore between 6-7 June
2003.
12. Attended two days seminar on “Industrial Practices in Engg , curriculum”, at Kongu
college of Engg ., Perundurai between 7-8, December 2002.
13. One day seminar on “ISO 9000” at center of Reliability, chennai, January 2000.
14. Summer school on “Reliability, Availability and Maintainability (RAM)” June 8-20, 1998,
IIT, Kharagpur.
15. Three days in house Training Programme on “Total Quality Management” in Technical
Education, 27-29 January 1997 at Periyar Maniammai college of Technology, Vallam,
Tanjore.
16. International Conference on “Quality Engineering and Management”, 4 - 6 August 1997 at
PSG Tech , Coimbatore.
17. Winter School on “Institute Linkage” 17- 22 November 1997 at Periyar Maniammai College
of Technology, Vallam, Tanjore.
18. Short term course on “Safety in Metallurgical Industries” 17-23 June 1996 at Sri Guru
Gobind College of Engineering & Technology, Vishnupuri, Nanded.
Seminar, Conference, Workshop Organised :
1. Organized a CSIR, AICTE sponsored National Conference on “Optimization Techniques
in Engineering Sciences and Technologies (OPTEST 2012)” as convener during 20-21
April 2012 at Bannari Amman Institute of Technology, Sathyamangalam.
2. AICTE Sponsored two weeks Faculty Development Programme on ““Computational
Intelligence for Modeling and Optimization of Manufacturing System” during 06th
June to 18th June 2011 at Bannari Amman Institute of Technology, Sathyamangalam.
3. Two days Faculty Development Programme on “Application of Intelligent of
Optimization Techniques using MATLAB 7.0” during 7 - 8 January 2011 at Bannari
Amman Institute of Technology, Sathyamangalam.
4. Jointly Organized Two Days workshop on “Research Methods and Tools” with
COINDIA, Coimbatore, during 20-21 November 2010 at SIEMA, Coimbatore.
5. AICTE Sponsored Two weeks Faculty Development Programme on “Research Methods
and Tools for Mechanical Engineering Faculty” during 31st May to 11th June 2010 at
Bannari Amman Institute of Technology, Sathyamangalam
6. Two Days workshop on “Research Methods and Tools for Engineering Faculty”
during 18 – 19 December 2009 at Bannari Amman Institute of Technology,
Sathyamangalam.
7. DSIR, DRDO and TNSCST sponsored National Conference on “Optimization
Techniques in Engineering Sciences and Technologies (OPTEST 2008)” as
organizing secretary during 27-28 March 2009 at Bannari Amman Institute of Technology,
Sathyamangalam.
8. DSIR, DRDO and TNSCST sponsored National Conference on “Optimization
Techniques in Engineering Science and Technologies (OPTEST 2008)” as
Coordinator during 27-28 March 2008 at Bannari Amman Institute of Technology,
Sathyamangalam.
9. DSIR and DRDO sponsored National Conference on “Emerging Trends in Mechanical
Engineering and Sciences (ETIMES 2007)” as organizing secretary during 19-20
December 2007 at Bannari Amman Institute of Technology, Sathyamangalam.
Ph.D Guidance / Supervisorship:
Name of Scholar Course Area of Research Status
Dr. C. Balamurugan,
Associate Professor
Department of Mechanical Engineering
M.A.M College of Engineering
Tiruchirappalli
Mechanical
Engineering
Tolerance Design
Improvement of
Mechanical
Assemblies through
Tolerance Analysis
and Optimization
Awarded
Dr.G.Paulraj,
Asst.Professor,
Department of Production Engineering,
J.J.College of Engineering and
Technology, Trichy.
Mechanical
Engineering Optimal Fixture Layout Awarded
Mr.G.Jayaprakash,
Professor, Mechanical Engineering,
Saranathan College of Engineering,
Trichy.
Mechanical
Engineering Tolerance Analysis
Thesis
submitted
Mr.M.Thilak , Senior Lecturer,
Department of Mechanical Engineering,
TRP College of Engineering, Trichy.
Mechanical
Engineering
Tolerance
Optimization
Course work
Completed
Mr.S.Dhanabalan ,
Senior Lecturer,
Department of Mechanical Engineering,
JJ College of Engineering and
Technology, Trichy.
Mechanical
Engineering EDM parameter
Optimization
Course work
Completed
Mr.S.Ayyappan,
Asst. Professor,
Mechanical Engineering,
Government College of
Engineering,Salem
Mechanical
Engineering
ECM Parameter
Optimization
Course work
Completed
Mr. M. Sivakumar
Department of Mechanical Engineering,
BIT, Sathy
Mechanical
Engineering
Electro Chemical
Machining
Course work
Completed
Mr. A. Amarkarthik
Department of Mechanical Engineering,
BIT, Sathy
Mechanical
Engineering
Ocean Wave energy
Converson
Course work
Completed
Mr. E. Prakash
Department of Mechanical Engineering,
BIT, Sathy
Mechanical
Engineering Bearing Vibrations Course work
Completed
Mr.S.Boopathi
Department of Mechanical Engineering,
BIT, Sathy
Mechanical
Engineering
Multi objective
Optimization in Wire
EDM
Course work
Completed
Guest lecturers delivered:
Topic Institution Date(s)
Modeling and Optimization of
Manufacturing System
AICTE Sponsored SDP at EGS Pillai
Engineering College, Nagapattinam. 08.05.2012
Modeling and Optimization Using
Intelligent Techniques
Department of Industrial Engineering,
College of Engineering, Guindy, Anna
University, Chennai
21.03.2012
Non-Conventional Optimization
Techniques
Department of Mechanical Engineering,
CK College of Engineering and
Technology, Cuddalore.
16.02.2012
Modeling Thro ANN for
Engineering Application
Department of Mechanical Engineering,
CK College of Engineering and
Technology, Cuddalore.
16.02.2012
Modeling Thro ANN PET Engineering College, Valliur,
Tirunelveli. 12.01.2012
ANN for Engineering Applications J J College of Engineering and
Technology, Trichy.
22.10. 2011
SA- Practical session using
MATLAB 7.0
Department of Mechanical Engineering,
Bannari amman Institute of Technology,
Sathyamangalam.
17.06. 2011
Modling and Optimisation of
Tolérance in Mechanical
Assemblies using PSO.
Department of Mechanical Engineering,
Bannari amman Institute of Technology,
Sathyamangalam.
17.06. 2011
Optimization Using MATLAB 7.0
(GA)
Department of Mechanical Engineering,
Bannari amman Institute of Technology,
Sathyamangalam.
13.06.2011
Using MATLAB 7.0 Department of Mechanical Engineering,
Bannari amman Institute of Technology,
Sathyamangalam.
10.06. 2011
Artificial Neural Network (ANN) A
Case Study
Department of Mechanical Engineering,
Bannari amman Institute of Technology,
Sathyamangalam.
10.06. 2011
Application of Intelligent Mohamed Sathak College of Engineering, 29.01.2011 
Optimization Techniques Using
MATLAB – 7.0
Kilakkarai.
ANN thro MATLAB 7.0 Mohamed sathk Engineering college,
Kilakari
29.01.2011
Particle Swarm Optimization
(PSO): An Introduction
Mohamed sathk Engineering college,
Kilakari
30.01. 2011
ANN thro MATLAB 7.0 Bannari amman Institute of Technology,
Sathyamangalam.
08.01. 2011
Introduction to Particle Swarm
Optimization (PSO)
Bannari amman Institute of Technology,
Sathyamangalam
07.01. 2011
Modeling thro ANN Bannari amman Institute of Technology,
Sathyamangalam
14.12. 2010
Introduction to Particle Swarm
Optimization (PSO)
Bannari amman Institute of Technology,
Sathyamangalam
13.12.2010
Particle Swarm Optimization (PSO)
and its Engineering appilcations
Kongu Engineering College Perudurai,
Erode.
26.11. 2010
PSO and ANN SIEMA , Coimbatore 21.11.2010
Artificial Neural Network (ANN) – A
Case study
Bannari Amman Institute of Technology,
Sathyamangalam
11.06. 2010
Particle Swarm Optimization (PSO) Bannari Amman Institute of Technology,
Sathyamangalam
02.06. 2010
Particle Swarm Optimization and its
Applications
JJ College of Engineering and
Technology, Tiruchirappali.
27.04. 2010
Non conventional Optimization
Techniques (Particle Swarm
Optimisation)
Bannari amman Institute of Technology,
Sathyamangalam
18 .12.2009 &
19.12.2009
Particle Swarm Optimisation and its
application
Alagappa Chettiar College of Engineering
and Technology, Karaikudi
2006
Membership in Professional Bodies:
 Member in MISTE (LM 37046)
Contributions to the Institution, Department and Society:
1. Chief Coordinator Industry Institute Partnership Cell
2. Senior Deputy Warden.
3. NAAC steering committee member
4. Chairman Board of studies
5. Faculty coordinator R&D Club and Patent
6. Faculty in charge Friend of Friendless (FOF)
7. Member Research Council of BIT
Awards and Recognitions :
 Name published in who is who ,2011
Visits Abroad: Nil
 davido.extraxim@gmail.com